Microwave-assisted synthesis of β-cyclodextrin functionalized celluloses for enhanced removal of Pb(II) from water: Adsorptive performance and mechanism exploration

Development of nanocellulose hydrogels for application in the food and biomedical industries: A review

As the most abundant and renewable natural resource, cellulose has attracted significant attention and research interest for the production of hydrogels (HGs). To address environmental issues and emerging demands, the benefits of naturally produced HGs include excellent mechanical properties and superior biocompatibility. HGs are three-dimensional networks created by chemical or physical cross-linking of linear or branched hydrophilic polymers and have high capacity for absorption of water and biological fluids. Although widely used in the food and biomedical fields, most HGs are not biodegradable. Nanocellulose hydrogels (NC-HGs) have been extensively applied in the food industry for detection of freshness, chemical additives, and substitutes, as well as the biomedical field for use as bioengineering scaffolds and drug delivery systems owing to structural interchangeability and stimuli-responsive properties. In this review article, the sources, structures, and preparation methods of NC-HGs are described, applications in the food and biomedical industries are summarized, and current limitations and future trends are discussed.

Competitive adsorption of heavy metals onto xanthate-modified sludge hydrochar and its solidification as secondary minerals

In this study, a sulfur-modified magnetic hydrochar was synthesized by grafting thiol-containing groups onto the sludge-derived hydrochar. The modified hydrochar exhibited effective adsorption of Cu2+, Pb2+, Zn2+, and Cd2+ over a wide pH range and in the presence of coexisting ions, and showed almost no secondary leaching in three acidic solutions. In the mult-metal ion system, the modified hydrochar exhibited maximum adsorption capacities were 39.38, 105.74, 26.53, and 38.11 mg g-1 for Cu2+, Pb2+, Zn2+, and Cd2+, respectively. However, the binding capacity and adsorption amount of modified hydrochar for metal ions were lower in the mult-metal ion system compared to the unit-metal ion system. Notably, Pb2+ showed a strong inhibitory effect on the adsorption of other heavy metal ions by modified hydrochar due to strong competition for xanthate functional groups. The Pb2+ occupied the xanthate and native functional groups (-OH, -NH2, and Fe-O etc.), leaving only a small amount of adsorption sites for Cu2+, Zn2+ and Cd2+. Simulation results further supported these findings, indicating that Pb2+ had the highest density profiles near the four functional groups, and the density profiles of the four heavy metals near the xanthate functional groups were greater compared to the other three functional groups. Furthermore, the SEM-EDS, TOF-SIMI, and XPS results indicated that modified hydrochar achieved excellent mineral binding mainly through electrostatic interaction, ion exchange, and chelation. Overall, these results highlight the sulfur-modified magnetic hydrochar as a highly efficient adsorbent for heavy metals in environmental applications.

Removal of Cr(VI) from aqueous solution using ball mill modified biochar: multivariate modeling, optimization and experimental study

Chromium (Cr(VI)) pollution has attracted wide attention due to its high toxicity and carcinogenicity. Modified biochar has been widely used in the removal of Cr(VI) in water as an efficient and green adsorbent. However, the existing biochar prepared by chemical modification is usually complicated in process, high in cost, and has secondary pollution, which limits its application. It is urgent to explore modified biochar with simple process, low cost and environmental friendliness. Therefore, ball milling wheat straw biochar (BM-WB) was prepared by ball milling technology in this paper. The adsorption characteristics and mechanism of Cr(VI) removal by BM-WB were analyzed by functional group characterization, adsorption model and response surface method. The results showed that ball milling effectively reduced the particle size of biochar, increased the specific surface area, and more importantly, enhanced the content of oxygen-containing functional groups on the surface of biochar. After ball milling, the adsorption capacity of Cr(VI) increased by 3.5-9.1 times, and the adsorption capacity reached 52.21 mg/g. The adsorption behavior of Cr(VI) follows the pseudo-second-order kinetics and Langmuir isotherm adsorption model rate. Moreover, the Cr(VI) adsorption process of BM-WB is endothermic and spontaneous. Under the optimized conditions of pH 2, temperature 45 °C, and adsorbent dosage 0.1 g, the removal rate of Cr(VI) in the solution can reach 100%. The mechanism of Cr(VI) adsorption by BM-WB is mainly based on electrostatic attraction, redox and complexation. Therefore, ball milled biochar is a cheap, simple and efficient Cr(VI) removal material, which has a good application prospect in the field of remediation of Cr(VI) pollution in water.

Removal of Pb(II) ions by cellulose modified-LaFeO3 sorbents from different biomasses

LaFeO3 perovskite is prepared by the cellulose-modified microwave-assisted citrate method using two different biomasses as a cellulose source; rice straw (RS) and banana peel (BP). The prepared samples are assigned as LaFeO3/cellulose-RS and as LaFeO3/cellulose-BP, respectively. Raman Spectra prove the presence of perovskite and cellulose phases, as well as biochar resulted from the thermal treatment of the cellulose. LaFeO3/cellulose-RS has a cauliflower morphology while, two phases are observed for LaFeO3/cellulose-BP, mesoporous cellulose phase and octahedral LaFeO3 nanoparticles as shown by scanning electron microscope (SEM) images. LaFeO3/cellulose-BP has higher porosity and larger BET surface area than LaFeO3/cellulose-RS. Both samples are applied for the removal of Pb(II) ions from aqueous solution by adsorption. The adsorption follows Langmuir isotherm, with maximum adsorption capacities of 524 and 730 mg/g for LaFeO3/cellulose-RS and LaFeO3/cellulose-BP, respectively. Cellulose precursors from different biomasses affect structural and morphological properties of LaFeO3/cellulose samples as well as the sorption performance for Pb(II) ions. BP is more recommended than RS, as a biomass, in the present study.

Amino-carboxyl cellulose for adsorption of Cd2+ and Pb2

An amino-carboxyl cellulose was synthesized using the grafting of glycine on the aldehyde cellulose through a Schiff base reaction for the adsorption of heavy metals with Cd2+ and Pb2+ as the representative. Higher affinity of the amino-carboxyl cellulose was found at pH 4.5-5.0 for Cd2+ and 4.0-5.5 for Pb2+. The equilibrium was achieved within 30 min. The adsorption capacities of amino-carboxyl cellulose (Cd2+: 85.7 mg g-1, Pb2+: 115.1 mg g-1, Cu2+: 68.2 mg g-1, Co2+: 60.1 mg g-1, Ni2+ 48.5 mg g-1 and Zn2+: 52.8 mg g-1) at 30 °C were observed. A mild increase in the adsorption capacities of Cd2+ and Pb2+ from 15 to 45 °C was observed. Adsorption data correlated well with the Langmuir and pseudo-second order equations, illustrating chemisorption of Cd2+ and Pb2+ by the amino-carboxyl cellulose. The adsorption of the amino-carboxyl cellulose for Cd2+ and Pb2+ was a spontaneous and endothermic. The amino-carboxyl cellulose owned a high reusability after 4 cycles.

Enhanced treatment of synthetic wastewater by bioaugmentation with a constructed consortium

Bioaugmentation by adding well-functioning mixed microorganism consortia represents a potentially useful approach to improve contaminant removal in wastewater treatment plants (WWTPs). However, unfavorable environmental conditions (i.e., low temperatures) can severely inhibit microbial activity, drawing our attention to constructing cold-tolerant microorganism preparations and investigating their availability in practical applications. Here we screened four in situ functional isolates from the activated sludge of secondary sedimentation tanks in WWTPs to construct a psychrophilic microbial consortium, which was used to perform bioaugmentation for enhanced removal of nitrogen and phosphorus under low temperatures. The consortium was established by cocultivation of four isolates, characterized by 16 S rRNA as the COD-degrading bacterium Aeromonas sp. Z3, aerobic denitrifying bacterium Acinetobacter sp. HF9, nitrifying bacterium Klebsiella sp. X8, and polyphosphate-accumulating bacterium Pseudomonas sp. PC5 respectively. The microorganism preparation was composed of Z3, HF9, X8, and PC5 under the ratio of 1: 1: 3: 1, which can exert optimal pollutant removal under the conditions of 12 °C, 6.0-9.0 pH, 120-200 r‧min-1, and a dosage of 5% (V/V). A 30-day continuous operation of the bioaugmented and control sequencing batch reactors (SBRs) was investigated, and the bioaugmented SBR showed a shorter start-up stage and a more stable operating situation. Compared to the control SBR, the COD, NH4+-N, TN, and TP removal efficiency of the bioaugmented SBR increased by an average of 7.95%, 9.05%, 9.54%, and 7.45% respectively. The analysis of the microbial community revealed that the introduced isolates were dominant in the activated sludge and that functional taxa such as Proteobacteria, Bacteroidota, and Actinobacteria were further enriched after a period of bioaugmentation. The study provides some basis and guidance for the practical application of how to strengthen the stable operation of WWTPs under low temperatures.

Adsorptive performance and mechanism exploration of l-lysine functionalized celluloses for enhanced removal of Pb(II) from aqueous medium

In this study, two novel biosorbents of l-lysine grafted cellulose (L-PCM, L-TCF) were prepared for Pb(II) removal from aqueous solutions. Various adsorption parameters were surveyed, such as adsorbent dosages, initial concentration of Pb(II), temperature and pH, using adsorption techniques. At normal temperature, less adsorbent can achieve better adsorption capacity (89.71 ± 0.27 mg g^-1 with 0.5 g L^-1 of L-PCM, 16.84 ± 0.02 mg g^-1 with 3.0 g L^-1 of L-TCF). The pH range of application for L-PCM was 4-12 and that of L-TCF was 4-13. The adsorption of Pb(II) by biosorbents went through the boundary layer diffusion stage and void diffusion stage. The adsorption mechanism was chemisorption based on multilayer heterogeneous adsorption. The pseudo-second-order model fitted the adsorption kinetics perfectly. The Freundlich isotherm model adequately described Multimolecular equilibrium relationship between Pb(II) and biosorbents; the predicted maximum adsorption capacities of the two adsorbents were 904.12 and 46.74 mg g^-1, respectively. The results showed that the adsorption mechanism was the electrostatic attraction between Pb(II) and -COOH and the complexation between Pb(II) and -NH₂. This work demonstrated that l-lysine modified cellulose-based biosorbents have great potential in the field of Pb(II) removal from aqueous solutions.

A Stable Fe-Zn Modified Sludge-Derived Biochar for Diuron Removal: Kinetics, Isotherms, Mechanism, and Practical Research

To remove typical herbicide diuron effectively, a novel sludge-derived modified biochar (SDMBC600) was prepared using sludge-derived biochar (SDBC600) as raw material and Fe-Zn as an activator and modifier in this study. The physico-chemical properties of SDMBC600 and the adsorption behavior of diuron on the SDMBC600 were studied systematically. The adsorption mechanisms as well as practical applications of SDMBC600 were also investigated and examined. The results showed that the SDMBC600 was chemically loaded with Fe-Zn and SDMBC600 had a larger specific surface area (204 m²/g) and pore volume (0.0985 cm³/g). The adsorption of diuron on SDMBC600 followed pseudo-second-order kinetics and the Langmuir isotherm model, with a maximum diuron adsorption capacity of 17.7 mg/g. The biochar could maintain a good adsorption performance (8.88-12.9 mg/g) under wide water quality conditions, in the pH of 2-10 and with the presence of humic acid and six typical metallic ions of 0-20 mg/L. The adsorption mechanisms of SDMBC600 for diuron were found to include surface complexation, π-π binding, hydrogen bonding, as well as pore filling. Additionally, the SDMBC600 was tested to be very stable with very low Fe and Zn leaching concentration ≤0.203 mg/L in the wide pH range. In addition, the SDMBC600 could maintain a high adsorption capacity (99.6%) after four times of regeneration and therefore, SDMBC600 could have a promising application for diuron removal in water treatment.

Preparation and modification of nanocellulose and its application to heavy metal adsorption: A review

Heavy metals are a notable pollutant in aquatic ecosystems that results in many deadly diseases of the human body after enrichment through the food chain. As an environmentally friendly renewable resource, nanocellulose can be competitive with other materials at removing heavy metal ions due to its large specific surface area, high mechanical strength, biocompatibility and low cost. In this review, the research status of modified nanocellulose for heavy metal adsorbents is primarily reviewed. Two primary forms of nanocellulose are cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs). The preparation process of nanocellulose was derived from natural plants, and the preparation process included noncellulosic constituent removal and extraction of nanocellulose. Focusing on heavy metal adsorption, the modification of nanocellulose was explored in depth, including direct modification methods, surface grafting modification methods based on free radical polymerization and physical activation. The adsorption principles of nanocellulose-based adsorbents when removing heavy metals are analyzed in detail. This review may further facilitate the application of the modified nanocellulose in the field of heavy metal removal.

Do tillage systems affect the cadmium threshold in farmland soil for environmental quality standard setting?

Tillage systems may change the cadmium (Cd) threshold of farmland soil. However, there have been few studies on this topic. Therefore, this study aimed to explore the influence of tillage systems on Cd threshold. The study conducted 2-year field experiments under different tillage systems (early rice-fallow, early rice-late rice and early rice-vegetable) at three typical Cd-polluted sites in China. The species sensitivity distribution (SSD) method was used to construct the SSD curves for the calculation of the Cd threshold by analyzing the experimental data. The sensitivity analysis results based on the SSD curves revealed that the sensitivities to Cd in rice varieties under the same tillage system were substantially different but almost the same under different tillage systems. These results can help select rice varieties with low Cd sensitivity for crop safety. Different tillage systems at the same site varied in their influence on Cd threshold values. Cd threshold values under early rice-late rice (e.g., 0.27, 0.28 mg/kg in Xiangtan City) and early rice-vegetable (e.g., 0.26, 0.31 mg/kg in Xiangtan City) tillage systems were roughly lower than that under the early rice-fallow tillage system (e.g., 0.33, 0.35 mg/kg in Xiangtan City). Notably, the influence of tillage systems resulted in Cd threshold values being generally lower than the Cd risk screening values of the current Chinese soil environmental quality standard. Analysis of the influence of different tillage systems on the Cd threshold is beneficial for the optimization of farmland soil environmental quality standards.

Hexavalent chromium (Cr(VI)) removal by ball-milled iron-sulfur @biochar based on P-recovery: Enhancement effect and synergy mechanism

After the biochar recovery of phosphorus (P), its role in eliminating Cr(VI) is uncertain. In this study, the iron-sulfur biochar (Fe/S@BC) was made by grinding Fe⁰, S⁰, and biochar with a ball mill. P-loaded iron-sulfur biochar (P-Fe/S@BC) was produced after recovering P from simulated wastewater and then used to remove Cr(VI) contamination in waterbodies. P-Fe/S@BC got a rich pore structure and more reactive sites through P-recovery. The experiments revealed that P-Fe/S@BC had an enhancement effect on Cr(VI) pollution with removal efficiencies of 76.9 % ∼ 99.4 %, all greater than Fe/S@BC (58.2 %). In particular, 25P-Fe/S@BC (with 6.55 mg P/g) had the most significant advantage. The combination of physical adsorption, electrostatic attraction, and precipitation contributed to Cr(VI) removal. This is an efficient strategy for reusing Fe/S@BC followed by P-recovery, intending to improve the Cr(VI) removal effect and achieve the sustainable use of P resources and wastes.

Adsorption of hydroquinone and Pb(II) from water by β-cyclodextrin/polyethyleneimine bi-functional polymer

A novel bi-functional β-cyclodextrin polymer (CD@TCT@PEI) was synthesized for the removal of hydroquinone and Pb(II) from wastewater. The structure and adsorption performance of CD@TCT@PEI towards hydroquinone and Pb(II) were studied comprehensively. Both of the adsorption processes fit the pseudo-second-order kinetic model well. The adsorption isotherms of hydroquinone and Pb(II) could be described well by Langmuir isotherm model, and the maximum adsorption capacities of hydroquinone and Pb(II) are 364.86 and 113.52 mg g^-1, respectively. The adsorption of hydroquinone and Pb(II) on CD@TCT@PEI is an exothermic and spontaneous process. The adsorbed CD@TCT@PEI could be regenerated easily, and can still maintain high adsorption performance after 5 cycles. The electrostatic interaction and coordination interaction account for the adsorption of Pb(II), and inclusion of cyclodextrin and hydrogen-bond interaction are responsible for hydroquinone adsorption. This study provides some insights to design an adsorbent that can simultaneously remove heavy metal ions and organic micropollutants from wastewater.

Applications of functionalized magnetic biochar in environmental remediation: A review

Magnetic biochar (MBC) is extensively applied on contaminants removal from environmental medium for achieving environmental-friendly remediation with reduction of secondary pollution owing to its easy recovery and separation. However, the summary of MBC synthesis methods is still lack of relevant information. Moreover, the adsorption performance for pollutants by MBC is limited, and thus it is imperative to adopt modification techniques to enhance the removal ability of MBC. Unfortunately, there are few reviews to present modification methods of MBC with applications for removing hazardous contaminants. Herein, we critically reviewed (i) MBC synthetic methods with corresponding advantages and limitations; (ii) adsorption mechanisms of MBC for heavy metals and organic pollutants; (iii) various modification methods for MBC such as functional groups grafting, nanoparticles loading and element doping; (iv) applications of modified MBC for hazardous contaminants adsorption with deep insight to relevant removal mechanisms; and (v) key influencing conditions like solution pH, temperature and interfering ions toward contaminants removal. Finally, some constructive suggestions were put forward for the practical applications of MBC in the near future. This review provided a comprehensive understanding of using functionalized MBC as effective adsorbent with low-cost and high-performance characteristics for contaminated environment remediation.

Bibliometric Analysis of the Influencing Factors, Derivation, and Application of Heavy Metal Thresholds in Soil

The study of threshold levels of heavy metals in soil is essential for the assessment and management of soil environmental quality. This study reviewed the influencing factors, the derivation, and application aspects of heavy metals' threshold values comprehensively by a combination of bibliometric analysis and scientific knowledge mapping. A total of 1106 related studies were comprehensively extracted from the Web of Science database during the period from 2001 to 2020. The results showed that the publication output has been growing strongly. An analysis on the subject, journal, country, and institution was carried out to demonstrate the development and evolution of this research branch during the two decades. According to high-frequency keywords analysis, external factors (e.g., soil physicochemical properties) and internal factors (e.g., crop genotype) can affect heavy metal threshold values in the soil-crop system. The current methods mainly include the Point model (e.g., evaluation factor method), the Probability model (e.g., species sensitivity distribution method), and the Empirical model (e.g., ecological environment effect method). A threshold study can be applicable to the risk assessment for soil heavy metal contamination in order to determinate the soil pollution degree and its spatial and temporal distribution characteristics. Moreover, challenges and prospects of the study of heavy metal threshold values are proposed, indicating that research should focus on the relationships between human health risks and the established threshold values of heavy metals in the soil, long-term field trials and bioavailability of heavy metals for the derivation of the thresholds, and the establishment of more scientific and rational soil environmental benchmarks.

Ground coffee waste-derived carbon for adsorptive removal of caffeine: Effect of surface chemistry and porous structure

Carbon-based adsorbents show high adsorption capacity towards caffeine due to their porosity and surface functionality. However, the main limiting factor for high performance has not been addressed; furthermore, the adsorption interaction with different active sites needs to be explored. In this study, we synthesized a hierarchical porous nitrogen-doped carbon with unique surface functionality by single-step calcination of coffee waste with KOH under N₂. The porous structure, nitrogen content, and types are optimized by varying calcination temperature and KOH concentration. The result of the adsorption experiments shows that both the nitrogen type and the pore size distribution are the limiting factors to adsorption. In addition, the effect of acidic and basic functional groups is studied in detail. The adsorption of caffeine on CW-C is dominantly governed by EDA interaction between the resonance structure of pyridonic-N and the electron-withdrawing group of the caffeine, and the dispersive force caused by the oxidized-N and delocalized π electron of caffeine. Furthermore, we demonstrate that the surface of CW-C is not suitable for the formation of electrostatic and non-electrostatic interaction with caffeine. The maximum adsorption capacity of caffeine at 25 °C is 274.2 mg/g. Moreover, we demonstrate that the unique physio-chemical properties of CW-C are capable of adsorbing other emerging contaminants such as diclofenac, where maximum adsorption capacity of 242.3 mg/g diclofenac is recorded.

Stabilization of lead and cadmium in soil by sulfur-iron functionalized biochar: Performance, mechanisms and microbial community evolution

Sulfur-iron functionalized biochar (BC-Fe-S) was designed by simultaneously supporting Fe₂O₃ nanoparticles and grafting sulfur-containing functional groups onto biochar to stabilize Pb and Cd in soil. The BC-Fe-S exhibited excellent stabilization performance for Pb and Cd with fast kinetic equilibrium within 5 days associating with pseudo-second-order model. The bioavailable-Pb and -Cd contents decreased by 59.22% and 70.28% with 3% BC-Fe-S treatment after 20 days of remediation. Speciation transformation analysis revealed that the increase of stabilization time and BC-Fe-S dosage with appropriate soil moisture and pH promoted toxicities decrease of Pb and Cd with transformation of labile fractions to more steady fractions. The labile fractions of Pb and Cd decreased by 12.22% and 16.21% with 3% BC-Fe-S treatment, and transformed to the residual speciation. Meanwhile, wetting-drying and freezing-thawing aging did not markedly alter the bioavailability of Pb and Cd, proving that the BC-Fe-S holds promise for stabilization of Pb and Cd in varying environmental conditions. 16S rRNA sequencing analysis demonstrated that the BC-Fe-S significantly improved diversity and composition of microbial community, especially increasing the relative abundance of heavy metal-resistant bacteria. Overall, these results suggested BC-Fe-S as a high-performance and environmental-friendly amendment with stability to remediate heavy metals polluted soil.

Bottled water quality ranking via the multiple-criteria decision-making process: a case study of two-stage fuzzy AHP and TOPSIS

Access to healthy drinking water is vital to human health and development. Bottled water consumption has been on the rise in recent years. As several chemical and bacteriological parameters affect bottled water quality, it is difficult to choose the highest-quality bottled water. Numerous studies have proposed the use of multiple-criteria decision-making (MCDM) methods to overcome this problem. Herein, the two-stage fuzzy analytic hierarchy process (FAHP) and technique for order preference by similarity to ideal solution (TOPSIS) method were adopted to rank different brands of bottled water. The FAHP approach allows working at the intervals of judgment rather than absolute values. TOPSIS is a technique for ordering performance based on its similarity to the ideal solution. An expert panel selected and classified the criteria and sub-criteria. A pairwise comparison questionnaire was then developed, and the weights of the criteria and sub-criteria were assigned by water quality experts. The data on the quality of different brands of water were collected from the Iranian bottled water database. The final data analysis and weight determination of each parameter were performed in Excel and R software Programs. Finally, the CCi (value of closeness coefficient) and rank of 71 bottled water brands were calculated, and the best brand was introduced. Among the selected criteria, carcinogenic chemical compounds with the weight of 0.368 were the most important compound in ranking bottled water brands, followed by bacteriologic, pathogenic chemical compounds, chemical compounds important in terms of toxicity, nutritious chemical compounds with a low toxicity level, chemical compounds related to esthetic effects, and chemical compounds without health effects, respectively.

Adsorption of metolachlor by a novel magnetic illite-biochar and recovery from soil

In this study, we investigated a highly efficient adsorbent that can be recycled from the soil. Walnut shells were used as raw materials to prepare original ecological biochar (OBC), illite modified biochar (IBC), FeCl₃ modified biochar (magnetic biochar; MBC), and illite and FeCl₃ modified biochar (IMBC), which were tested as low-cost adsorbents. The agents were used to remove metolachlor (MET) from soil. Scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, magnetic sensitivity curve analysis, and a series of adsorption experiments were conducted to study the interaction between illite and MBC, and the effect on MET adsorption. Compared with OBC, IMBC had more adsorption sites on the surface. IMBC improved the hole filling effect during the adsorption process. IMBC had more oxygen-containing functional groups and it performed better at removing organic matter through π-π interactions. According to the Langmuir model, the Q₀ values for IBC, MBC, and IMBC were 91.74 mg g^-1, 107.53 mg g^-1, and 129.87 mg g^-1, respectively, which were significantly higher than that for OBC (72.99 mg g^-1). The response surface model was used to explore the optimal adsorption conditions for IMBC. After three regeneration cycles, the MET adsorption rate with IMBC was still 81.38% and the MET recovery rate was 98.12%. Therefore, IMBC was characterized as an adsorbent with high efficiency, low cost, and good recyclability. In addition, we propose a suitable agricultural system for recovering MBC on site in the field.

Effective lead passivation in soil by bone char/CMC-stabilized FeS composite loading with phosphate-solubilizing bacteria

Bioremediation by phosphate-solubilizing bacteria (PSB) has attracted extensive attentions due to its economical and eco-friendly properties for lead (Pb) passivation in soil. Herein, bone char (BC) supported biochemical composite (CFB₁-P) carrying advantages of BC, PSB, iron sulfide (FeS) and carboxymethyl cellulose (CMC) was designed and applied to Pb passivation. The composite at a mass ratio of BC:CMC:FeS = 1:1:1 possessed high passivation efficiency (65.47%), and has been demonstrated to offer appropriate habitat environment for PSB to defend against Pb(II) toxicity, thus enhancing the phosphate-solubilizing amount of PSB to 140.72 mg/L for passivating Pb(II). Batch experiments showed that the CFB₁-P possessed excellent adsorption properties with maximal monolayer Pb(II) uptake of 452.99 mg/g during an extensive pH range of 2.0-6.0. Furthermore, by applying CFB₁-P dosage of 3% into Pb-contaminated soil, the labile Pb fractions were reduced from 29.05% to 6.47% after simulated remediation of 10 days, and converted into steady fractions. The CFB₁-P was demonstrated to achieve high Pb(II) passivation through combined functions of chemical precipitation, complexation, electrostatic attraction and biomineralization, accompanied by the formation of more stable crystal structures, for instance, Pb₅(PO₄)₃OH, Pb₃(PO₄)₂ and PbS. These results suggested CFB₁-P as a potential alternative for efficient remediation of Pb-contaminated soil.

Tetracycline adsorption mechanisms by NaOH-modified biochar derived from waste Auricularia auricula dregs

Tetracycline (TC) is not easy to degrade in human or animal and can even be converted to more toxic substances. The overuse and wanton discharge of TC also caused serious problem of water pollution. This study investigated the removal of TC by biochar (BC) prepared from waste Auricularia auricula dregs and modified with NaOH by characterizing the pH and adsorption kinetics, and using isotherm models. Three BC samples were prepared and that produced using the highest concentration of NaOH (8 M) was more suitable for removing TC, where the adsorption amount was 26.65 mg/g. Pseudo-second order and Freundlich models both fitted well to the adsorption kinetics, and diffusion of the liquid film was considered the rate-controlling step. The multivariate mechanism involved electron interplay, H-bonding, and π-π electron donor-acceptor interactions. The results of this work can not only make the waste Auricularia auricula dregs resourceful, but also provide a new method for the removal of TC in wastewater, which is of great practical significance.

One-pot synthesis of Ca-based magnetic hydrochar derived from consecutive hydrothermal and pyrolysis processing of bamboo for high-performance scavenging of Pb(Ⅱ) and tetracycline from water

Ca-based magnetic bamboo-derived hydrochar described as Ca-MBHC was synthesized by one-pot pyrolysis, and was applied to remediation of lead (Pb) and tetracycline (TC) polluted water. Characterizations not only attested the loading of CaCO₃ and Fe⁰ onto the hydrochar, but also demonstrated the magnetism of Ca-MBHC. Adsorption kinetic experiments showed that the Ca-MBHC could eliminate Pb(II) and TC during a wide range of pH, and appeared rapid uptake equilibrium within 240 and 60 min for Pb(II) and TC, severally. Adsorption isotherm experiments showed that the Ca-MBHC possessed highest adsorption of 475.58 mg/g concerning Pb(II), and heterogeneous uptake of 142.44 mg/g for TC. Furthermore, the Ca-MBHC could achieve Pb(II) binding owing to complexation, reduction, ion exchange and electrostatic attraction, whereas the TC uptake might be related to π-π stacking reciprocities, pore filling and hydrogen bonding. Overall, the Ca-MBHC could be viewed as an excellent adsorbent for scavenging Pb(II) and tetracycline from water.

Enhanced adsorption of tetracycline by the modified tea-based biochar with the developed mesoporous and surface alkalinity

A tea residue-based biochar, Fe-BCK0.5-VB6, was obtained by pyrolysis with KOH activation and alkalization with vitamin B6, to develop the mesopore structure and functionalized surface to improve the adsorption performance on tetracycline (TC). An increased specific surface area of 455 m²·g^-1 and expanded mesopore volume of 0.138 cm³·g^-1 for Fe-BCK0.5-VB6, were observed. The Avrami-fractional order kinetics and Langmuir isotherm models best fitted the experimental data, indicating the characteristics of multiple kinetic stages and monolayer of TC adsorption process. Several possible interactions, including acid-base reaction, pore filling, electrostatic interactions, π-π interactions, and hydrogen bonding forces, were participated in the attachment of TC. This novel mesoporous biochar with enhanced surface alkalinity is expected with a viable future role as an efficient adsorbent in the remedies of acidic antibiotics wastewater pollution.

Magnetic porous biochar with high specific surface area derived from microwave-assisted hydrothermal and pyrolysis treatments of water hyacinth for Cr(Ⅵ) and tetracycline adsorption from water

Magnetic porous water hyacinth-derived biochar (MPBC_MW3) was synthesized via two-step Microwave (MW)-assisted processes. Characterization results not only testified high specific surface area (2097.50 m²/g) of the MPBC_MW3 assisted by MW-assisted pyrolysis, but also revealed its favorable magnetism derived from MW-assisted hydrothermal process. The MPBC_MW3 possessed pH-dependent monolayer adsorption capacities of 202.61 and 202.62 mg/g for Cr(VI) and TC with quick attainments of uptake equilibrium within 150 and 200 min. Moreover, the Cr(VI) and TC uptake were substantially steady under the interference from multifarious co-existing ions with slight decline after three adsorption-desorption cycles. Furthermore, the MPBC_MW3 was demonstrated to achieve excellent Cr(VI) binding primarily through complexation, electrostatic interaction, reduction and ion exchange, while presenting outstanding TC removal via pore filling, π-π stacking, hydrogen bonding force, electrostatic interaction and complexation. All these findings suggested the MPBC_MW3 synthesized by MW-assisted processes as an excellent adsorbent for purification of Cr(VI) and TC-contaminated water.

Exploring different mechanisms of biochars in removing hexavalent chromium: Sorption, reduction and electron shuttle

The role of different biochars in Cr(VI) removal process is not clear. Two raw materials with distinct components were prepared into biochars at various pyrolysis temperatures. The biochar derived from cotton stark (with less lignin than walnut shell) always had more surface functional groups. The pyrolysis temperature had a significant effect on the biochar. In the sorption experiments, the fitting results of two compartment models showed that slow compartment dominated by surface functional groups plays a leading role in the Cr(VI) removal by low-temperature char, while the contribution of the rapid or slow compartment to the process of high-temperature char was equal. In the experiment of biochar mediated the lactate to reduce Cr(VI), the biochar derived from walnut shell (richer lignin) had better conductivity due to its highly aromatic structure, which could directly transfer electrons. This study indicated that various biochars may play different roles in the Cr(VI) removal process.

Chitosan immobilization and Fe3O4 functionalization of olive pomace: An eco-friendly and recyclable Pb2+ biosorbent

An effective and sustainable biosorbent (MagOPIC) was prepared from chitosan and olive pomace by the combined action of immobilization and magnetic modification to remediate Pb²⁺-contaminated waters. Pb²⁺ sorption yield at the end of the equilibrium (45 min) period was estimated to be 98.56 ± 0.28% at pH 5.5. Agitation speed, ionic strength, and temperature did not significantly affect the Pb²⁺ biosorption. Biosorption kinetics are successfully fitted by the pseudo-second-order equation while the equilibrium biosorption data are properly modeled using the Freundlich and D-R isotherms. MagOPIC has also exhibited a high biosorption yield in the column tests (≥99%) and showed remarkable stability up to twenty consecutive regeneration cycles. Furthermore, it was successfully used for the treatment of Pb²⁺ containing real wastewater. The findings of this work highlighted the potential use of MagOPIC as a novel, cost-effective and eco-friendly biosorbent for the Pb²⁺ removal from the contaminated aquatic phase.

Removal of Cd(Ⅱ) and anthracene from water by β-cyclodextrin functionalized magnetic hydrochar: Performance, mechanism and recovery

Magnetic hydrochar modified by β-cyclodextrin (β-CD) described as β-CD@MHC was successfully synthesized and applied to simultaneous removal of cadmium (Cd) and anthracene (ANT). Characterizations attested the grafting of β-CD groups onto β-CD@MHC with excellent magnetism. Moreover, the β-CD@MHC could eliminate Cd(II) and ANT during an extensive pH scope, and presented fast adsorption equilibrium in 60 min and 80 min for Cd(II) and ANT, respectively. And the β-CD@MHC possessed prominent adsorption properties with maximum monolayer binding of 47.28 mg/g for Cd(II), and corresponding heterogeneous uptake of 60.27 mg/g concerning ANT. Furthermore, the β-CD@MHC could effectively avoid the competitive behavior between Cd(II) and ANT mainly due to complexation and electrostatic attraction effects for capturing Cd(II), and host-guest interaction in the removal of ANT. Additionally, the binding of Cd(II) and ANT onto β-CD@MHC dropped slightly after stepwise desorption, suggesting the β-CD@MHC as a high-performance adsorbent for heavy metals and PAHs elimination from wastewater.

β-cyclodextrin-containing polymer based on renewable cellulose resources for effective removal of ionic and non-ionic toxic organic pollutants from water

A novel, bio-derived cyclodextrin-based trifunctional adsorbent has been successfully synthesized for efficient, rapid and simultaneous removal of a broad-spectrum of toxic ionic (anionic and cationic dyes) and non-ionic organic pollutants from water. The composition, morphology and the presence of functional groups in the obtained sorption material were characterized by elemental analysis, XRD, SEM, and FTIR spectroscopy. The adsorption results were represented by cationic dye (crystal violet, CV) and endocrine disrupting compound (bisphenol A, BPA) as an adsorbate. The sorption processes of the model pollutants were studied with both kinetic and equilibrium models. The results showed that the sorption was rapid (less than 1 min) and the time evolution could be fitted using a pseudo-second order model. According to Langmuir isotherm model, the maximum adsorption capacities were found at 113.64 and 43.10 mg g^-1 for BPA and CV, respectively. The adsorption ability of β-CDPs was kept nearly on the same level after five regeneration cycles. Furthermore, almost complete removal of the pollutants was observed during the treatment of real effluents samples thus the bio-derived, cheap and reusable BAN-EPI-CDP has a promising potential for practical applications.

Inverse identification of pollution source release information for surface river chemical spills using a hybrid optimization model

To evaluate the liability of the spilled contaminant and to design comprehensive emergency response schemes, it is essential to estimate the contaminant source characteristic and identify where, when and how much the spilled contaminant is injected into a surface river. In this study, an effective pollution source inverse method is developed to reconstruct the release history of the injection location, time, and quantity, and provide appropriate emergency response schemes for dealing with surface river environmental pollution. The pollution source inverse method IGSAA is developed by an integration of genetic algorithm (IGA) and simulated annealing algorithm (SAA) in order to guarantee both the global searching ability and convergence speed. The pollution source inverse method IGSAA is then applied to a hypothetical study, comparing with the traditional GA-based and SAA-based methods, to verify the accuracy and efficiency of the contaminant source inverse, and to a trace study of Truckee River in west America to identify the contaminant source release history and characteristic under different scenarios. The pollution source inversion results can help decision-makers (DMs) to identify the contaminant source characteristics of a chemical spill, and carry out emergency disposal scheme for an emergency rescue in a quick response, and enhance the supervision and management ability for a real surface river system.

Enhanced 4-FP removal with MnFe2O4 catalysts under dielectric barrier discharge plasma: Economical synthesis, catalytic performance and degradation mechanism

The dielectric barrier discharge plasma (DBDP) process has received extensive attention for the removal of organic contaminants from water. A novel microwave-assisted hydrothermal method was used to easily and rapidly synthesize MnFe₂O₄ catalysts. Based on the DBDP process, MnFe₂O₄ can enhance 4-fluorophenol (4-FP) abatement from 44.15% to 58.78% through the catalysis within 18 min. Then, the adjunction of O₃ generated by discharge can further boost 4-FP degradation to 94.94%. After the whole optimization process is complete, the associated pseudo-first-order reaction kinetic constant and energy efficiency were enhanced from 0.0327 to 0.1536 min^-1 and 2067.13 mg kW h^-1 to 4444.75 mg kW h^-1, respectively. With the help of the condition, blank and radical capture experiments, the catalytic performance caused by MnFe₂O₄ and O₃ was attributed to the joint action of Fenton-like reactions, photocatalysis (ultraviolet, UV), photoassisted Fenton reactions and O₃ catalysis. The overall downward trend of the possible intermediate toxicities indicated that the DBDP/MnFe₂O₄/O₃ process can effectively remove and mineralize 4-FP without the generation of more toxic intermediates. In addition, during the 5 cycles, MnFe₂O₄ can maintain excellent recovery, efficiency and durability. In summary, the coupling of discharge plasma and MnFe₂O₄ sheds new light on catalysis for wastewater treatment.