Comparison of soluble microbial product (SMP) production in full-scale anaerobic/aerobic industrial wastewater treatment and a laboratory based synthetic feed anaerobic membrane system

Allelochemicals-mediated interaction between algae and bacteria: Direct and indirect contact

Secondary metabolites with bioactivity are allelochemicals. This study adopted direct contact (R0) and indirect contact (separated by 0.45 µm membrane, R1-A for algae, R1-S for sludge) to reveal the role of metabolites especially allelochemicals on interaction of bacteria and algae. Direct contact exhibited better nutrients removal than indirect contact, due to less antibacterial allelochemicals and oxidative stress. Bacterial signaling molecules were not detected. The major algae-derived allelochemicals were 13-Docosenamide, 9-Octadecenamide, n-Hexadecanoic acid, erucic acid, octadecanoic acid, β-sitosterol, and E,E,Z-1,3,12-Nonadecatriene-5,14-diol. Furthermore, presence of 13-Docosenamide and 9-Octadecenamide was associated with succession of Flavobacterium and suppression of nitrifying bacteria (Nitrosomonas, Ellin6067, and Nitrospira). Direct contact stimulated denitrifying bacteria Saccharimonadales and algae Scenedesmus, whereas indirect contact is friendly to Dechloromonas, Competibacter, nitrifying bacteria, algae Desmodesmus and Dictyosphaerium. This study highlights the essentiality of cell contact of bacteria-algae in establishing synergy, as cell contact mitigates antagonistic effect induced by metabolites.

Current advances and research prospects for agricultural and industrial uses of microbial strains available in world collections

Microorganisms are an important component of the ecosystem and have an enormous impact on human lives. Moreover, microorganisms are considered to have desirable effects on other co-existing species in a variety of habitats, such as agriculture and industries. In this way, they also have enormous environmental applications. Hence, collections of microorganisms with specific traits are a crucial step in developing new technologies to harness the microbial potential. Microbial culture collections (MCCs) are a repository for the preservation of a large variety of microbial species distributed throughout the world. In this context, culture collections (CCs) and microbial biological resource centres (mBRCs) are vital for the safeguarding and circulation of biological resources, as well as for the progress of the life sciences. Ex situ conservation of microorganisms tagged with specific traits in the collections is the crucial step in developing new technologies to harness their potential. Type strains are mainly used in taxonomic study, whereas reference strains are used for agricultural, biotechnological, pharmaceutical research and commercial work. Despite the tremendous potential in microbiological research, little effort has been made in the true sense to harness the potential of conserved microorganisms. This review highlights (1) the importance of available global microbial collections for man and (2) the use of these resources in different research and applications in agriculture, biotechnology, and industry. In addition, an extensive literature survey was carried out on preserved microorganisms from different collection centres using the Web of Science (WoS) and SCOPUS. This review also emphasizes knowledge gaps and future perspectives. Finally, this study provides a critical analysis of the current and future roles of microorganisms available in culture collections for different sustainable agricultural and industrial applications. This work highlights target-specific potential microbial strains that have multiple important metabolic and genetic traits for future research and use.

Effect of antibiotic mixtures on the characteristics of soluble microbial products and microbial communities in upflow anaerobic sludge blanket

Two upflow anaerobic sludge blanket reactors (UASBs) were used to investigate the effects of three antibiotic mixtures (erythromycin, sulfamethoxazole, and tetracycline) on reactor performance, soluble microbial products (SMPs) composition and microbial community. One reactor (UASB_antibiotics) was fed with antibiotic mixtures, whereas another reactor (UASB_control) was used as a control without the addition of antibiotic mixtures. Compared with those in UASB_control, UASB_antibiotics show lower chemical oxygen demand removal efficiency and biogas content. A higher removal efficiency of antibiotic mixtures was obtained in first few stages in UASB_antibiotics. The SMPs composition of effluent from the two reactors did not differ significantly, and the main components were protein-like substances, which produced higher fluorescence intensity in UASB_antibiotics. Gas chromatography-mass spectrometry analysis revealed that the main compounds identified as SMPs (<580 Da) were alkanes, aromatics and esters, with only 20% similarity of SMPs between UASB_antibiotics and UASB_control. Antibiotics had a significant effect on the microbial community structure. Notably, in UASB_control, hydrogenotrophic methanogens, key microorganisms in anaerobic digestion, had an obvious advantage at all stages compared with UASB_antibiotics, whereas acetoclastic methanogen exhibited the opposite pattern. The above results demonstrated that antibiotic mixtures influenced the effluent quality during anaerobic treatment of synthetic wastewater, resulting in changes in the microbial community structure. This study clarified the effect of antibiotic mixtures on the operation of UASBs. It could contribute to identifying potential strategies for improving effluent quality in anaerobic treatment.

Effects of pharmaceuticals on membrane bioreactor: Review on membrane fouling mechanisms and fouling control strategies

Pharmaceuticals have become contaminants of emerging concern due to their toxicity towards aquatic life and pseudo persistent nature in the environment. Membrane bioreactor (MBR) is one such technology that has the potential to act as a barrier against the release of pharmaceuticals into the environment. Fouling is the deposition of the constituents of the mixed liquor on the membrane surface and it limit the world-wide applicability of MBRs. To remove foulant layer, aggressive chemicals and extra cost consideration in terms of energy are required. Extracellular polymeric substances (EPS) and soluble microbial products (SMP) are recognized as principal foulants. Presence of pharmaceuticals has been found to increase the fouling in MBRs. Fouling aggravates in proportion to the concentration of pharmaceuticals. Pharmaceuticals exert chemical stress in microbes, hence forcing them to secrete more EPS/SMP. Pharmaceuticals alter the composition of the foulants and affect microbial metabolism, thereby inflicting direct/indirect effects on fouling. Pharmaceuticals have been found to increase or decrease the size of sludge flocs, however the exact mechanism that govern the floc size change is yet to be understood. Different techniques such as coupling advanced oxidation processes with MBR, adding activated carbon, bioaugmenting MBR with quorum quenching strains have shown to reduce fouling in MBRs treating pharmaceutical wastewater. These fouling mitigation techniques work on reducing the EPS/SMP concentration, thereby alleviating fouling. The present review provides a comprehensive understanding of the effects induced by pharmaceuticals in the activated sludge characteristics and identifying the fouling mechanism. Furthermore, significant knowledge gaps and recent advances in fouling mitigation strategies are discussed. This review has also made an effort to highlight the positive aspect of the foulant layer in retaining pharmaceuticals and antibiotic resistance genes, thereby suggesting a possible delicate trade-off between the flux decline and enhanced removal of pharmaceuticals.

Spectral characterization of the effect of gas-water ratio on dissolved organic nitrogen variation along a drinking water biological aerated filter

To improve the understanding of dissolved organic nitrogen (DON) variation characteristics in a biological aerated filter (BAF) used for drinking water treatment, this study investigated the effects of gas-water ratios (0, 0.5:1, 2:1, and 10:1), a controlling factor of BAF operation, on DON characteristics. The dissolved organic carbon (DOC) removal efficiency in the BAF was consistent with DON concentration and increased as the gas-water ratio increased to a certain point, above which the increase gradually decreased. The optimal gas-water ratio in this study was considered to be 2:1 from the perspective of DOC removal and DON reduction. Use of fluorescence regional integration (FRI) and parallel factor (PARAFAC) model to analyze the effects of the gas-water ratio on the spectral characteristics of DON revealed that humic acid-like substances were not sensitive to the gas-water ratio, while protein-like substances were more sensitive. Increasing the gas-water ratio was beneficial to the reduction of biodegradable DON. Correlation analysis showed that the results obtained using FRI were consistent with those obtained using the PARAFAC model under different gas-water ratios.

Applications of Up-Flow Anaerobic Sludge Blanket (UASB) and Characteristics of Its Microbial Community: A Review of Bibliometric Trend and Recent Findings

The interest in research on up-flow anaerobic sludge blanket (UASB) reactors is growing. The meta-analysis of bibliometric data highlighted the growing interest in four diverse topics: (i) energy recovery production; (ii) combination with other treatments; (iii) the study of processes for the removal of specific pollutants and, (iv) characterization of microbial community and granular sludge composition. In particular, the papers published in the first 6 months of 2021 on this process were selected and critically reviewed to highlight and discuss the results, the gaps in the literature and possible ideas for future research. Although the state of research on UASB is to be considered advanced, there are still several points that will be developed in future research such as the consolidation of the results obtained on a semi-industrial or real scale, the use of real matrices instead of synthetic ones and a more in-depth study of the effect of substances such as antibiotics on the microbiota and microbiome of UASB granular biomass. To date, few and conflicting data about the environmental footprint of UASB are available and therefore other studies on this topic are strongly suggested.