Solar photo-Fenton treatment of the anti-cancer drug anastrozole in different aqueous matrices at near-neutral pH: Transformation products identification, pathways proposal, and in silico (Q)SAR risk assessment

A review on in silico prediction of the environmental risks posed by pharmaceutical emerging contaminants

Computer-aided (in silico) prediction has shown good potential to support the environmental risk assessment (ERA) of pharmaceutical emerging contaminants (PECs), allowing low-cost, animal-free, high-throughput screening of multiple potential risks posed by a wide variety of pharmaceuticals in the environment based on insufficient toxicity data. This review provided recent insights regarding the application of in silico approaches in prediction for environmental risks of PECs. Based on the review of 20 included articles from 8 countries published since 2018, we found that the researchers' interest and concern in this research topic were sharply aroused since 2021. Recently, in silico approaches have been widely used for the prediction of bioaccumulation and biodegradability, lethal endpoints, developmental toxicity, mutagenicity, other eco-toxicological effects such as ototoxicity and hematological toxicity, and human health hazards of exposure to PECs. Particular attention has been given to the simultaneous discernment of multiple environmental risks and health effects of PECs based on mechanistic data of pharmaceuticals using advanced bioinformatic methods such as transcriptomic analysis and network pharmacology prediction. In silico software platforms and databases used in the included studies were diversified, and there is currently no standardized and accepted in silico model for ERA of PECs. Date suggested that in silico prediction of the environmental risks posed by PECs is still in its infancy. Considerable critical challenges need to be addressed, including consideration of environmental exposure concentration for PECs, interactions among mixtures of PECs and other contaminants coexisting in environments, and development of in silico models specific to ERA of PECs.

Core-shell magnetic CFO@COF composites toward peroxymonosulfate activation for degradation of sulfamethoxazole from aqueous solution: A comparative study and mechanistic consideration

A core-shell covalent organic framework encapsulated Co1.2Fe1.8O4 magnetic particles (CFO@COF) was designed and prepared successfully to activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) degradation. It displays amazing catalytic reactivity since the unique interior structure and synergistic effect between COF shell and CFO core, reaching 99.8% removal of SMX (10 mg/L) within 30 min and 90.8% TOC removal. The synergy between bimetals vests high reactivity to CFO core. And the outer COF shell can stabilize the CFO core under intricate reaction conditions to restrain the leaching of Co ions (decreased from 0.75 to 0.25 mg/L). Further investigation compared the activation mechanism in two different system, CFO/PMS system and CFO@COF/PMS system. The result showed that the radical mechanism controlled by SO4⋅- guided the SMX degradation in CFO/PMS system whereas the 1O2 played a pivotal role in CFO@COF/PMS system called non-radical leading. The influences of various factors on degradation experiments and SMX degradation pathway were also studied. Most importantly, risk assessment in CFO@COF/PMS/SMX system was estimated via "ecological structure activity relationships". In most case, the toxicities of intermediates were lower than the initial samples, which confirmed the effectiveness of CFO@COF/PMS/SMX system in the reduction of toxicity of SMX.

Magnetite Nanoparticles as Solar Photo-Fenton Catalysts for the Degradation of the 5-Fluorouracil Cytostatic Drug

Heterogeneous catalysts based on magnetite nanoparticles, Fe₃O₄, were prepared by the chemical coprecipitation method using iron (III) chloride as a salt precursor. The physicochemical properties of the nanoparticles were determined by different techniques and the efficiency was evaluated for the degradation of the cytostatic drug, 5-fluorouracil (5-FU), in aqueous solution by photo-Fenton process under simulated solar radiation. The most influential parameters, namely pH of the solution, catalyst load, H₂O₂ dosage, and use of radiation, were studied and optimized in the degradation process. The optimal conditions to achieve a 100% degradation of 5-FU (10 mg L^-1) and a high mineralization degree (76%) were established at the acidic pH of 3.0, 100 mg L^-1 of catalyst loading, and 58 mM of H₂O₂ under simulated solar radiation. The contribution of iron leaching to the catalyst deactivation, the role of the dissolved iron ions on homogenous reactions, and the stability of the catalyst were assessed during consecutive reaction cycles.

Challenges on solar oxidation as post-treatment of municipal wastewater from UASB systems: Treatment efficiency, disinfection and toxicity

The application of solar photo-Fenton as post-treatment of municipal secondary effluents (MSE) in developing tropical countries is the main topic of this review. Alternative technologies such as stabilization ponds and upflow anaerobic sludge blanket (UASB) are vastly applied in these countries. However, data related to the application of solar photo-Fenton to improve the quality of effluents from UASB systems are scarce. This review gathered main achievements and limitations associated to the application of solar photo-Fenton at neutral pH and at pilot scale to analyze possible challenges associated to its application as post-treatment of MSE generated by alternative treatments. To this end, the literature review considered studies published in the last decade focusing on CECs removal, toxicity reduction and disinfection via solar photo-Fenton. Physicochemical characteristics of effluents originated after UASB systems alone and followed by a biological post-treatment show significant difference when compared with effluents from conventional activated sludge (CAS) systems. Results obtained for solar photo-Fenton as post-treatment of MSE in developed countries indicate that remaining organic matter and alkalinity present in UASB effluents may pose challenges to the performance of solar advanced oxidation processes (AOPs). This drawback could result in a more toxic effluent. The use of chelating agents such as Fe³⁺-EDDS to perform solar photo-Fenton at neutral pH was compared to the application of intermittent additions of Fe²⁺ and both of these strategies were reported as effective to remove CECs from MSE. The latter strategy may be of greater interest in developing countries due to costs associated to complexing agents. In addition, more studies are needed to confirm the efficiency of solar photo-Fenton on the disinfection of effluent from UASB systems to verify reuse possibilities. Finally, future research urges to evaluate the efficiency of solar photo-Fenton at natural pH for the treatment of effluents from UASB systems.

Removal of chloramphenicol antibiotics in natural and engineered water systems: Review of reaction mechanisms and product toxicity

Chloramphenicol antibiotics are widely applied in human and veterinary medicine. They experience natural attenuation and/or chemical degradation during oxidative water treatment. However, the environmental risks posed by the transformation products of such organic contaminants remain largely unknown from the literature. As such, this review aims to summarize and analyze the elimination efficiency, reaction mechanisms, and resulting product risks of three typical chloramphenicol antibiotics (chloramphenicol, thiamphenicol, and florfenicol) from these transformation processes. The obtained results suggest that limited attenuation of these micropollutants is observed during hydrolysis, biodegradation, and photolysis. Comparatively, prominent abatement of these compounds is accomplished using advanced oxidation processes; however, efficient mineralization is still difficult given the formation of recalcitrant products. The in silico prediction on the multi-endpoint toxicity and biodegradability of different products is systematically performed. Most of the transformation products are estimated with acute and chronic aquatic toxicity, genotoxicity, and developmental toxicity. Furthermore, the overall reaction mechanisms of these contaminants induced by multiple oxidizing species are revealed. Overall, this review unveils the non-overlooked and serious secondary risks and biodegradability recalcitrance of the degradation products of chloramphenicol antibiotics using a combined experimental and theoretical method. Strategic improvements of current treatment technologies are strongly recommended for complete water decontamination.

Electrochemical Oxidation of Anastrozole over a BDD Electrode: Role of Operating Parameters and Water Matrix

The electrochemical oxidation (EO) of the breast-cancer drug anastrozole (ANZ) is studied in this work. The role of various operating parameters, such as current density (6.25 and 12.5 mA cm−2), pH (3–10), ANZ concentration (0.5–2 mg L−1), nature of supporting electrolytes, water composition, and water matrix, have been evaluated. ANZ removal of 82.4% was achieved at 1 mg L−1 initial concentration after 90 min of reaction at 6.25 mA cm−2 and 0.1 M Na2SO4. The degradation follows pseudo-first-order kinetics with the apparent rate constant, kapp, equal to 0.022 min−1. The kapp increases with increasing current density and decreasing solution pH. The addition of chloride in the range 0–250 mg L−1 positively affects the removal of ANZ. However, chloride concentrations above 250 mg L−1 have a detrimental effect. The presence of bicarbonate or organic matter has a slightly negative but not significant effect on the process. The EO of ANZ is compared to its degradation by solar photo-Fenton, and a preliminary economic analysis is also performed.

A review toward contaminants of emerging concern in Brazil: Occurrence, impact and their degradation by advanced oxidation process in aquatic matrices

This work presents data regarding the occurrence and treatment of Contaminants of Emerging Concern (CECs) in Brazil in the past decade. The literature review (2011-2021) revealed the detection of 87 pharmaceutical drugs and personal care products, 58 pesticides, 8 hormones, 2 illicit drugs, caffeine and bisphenol A in distinct matrices (i.e.: wastewater, groundwater, sea water, rainwater, surface water, drinking water and hospital effluent). Concentrations of CECs varied from ng-μg L^-1 depending on the location, compound and matrix. The inefficiency of conventional wastewater treatment methods on the removal of CECs and lack of basic sanitation in some regions in the country aggravates contamination of Brazilian aquatic environments and poses potential environmental and health risks. Advanced oxidation processes (AOPs) are pointed out as viable and efficient alternatives to degrade CECs and prevent environmental contamination. A total of 375 studies involving the use of AOPs in Brazilian aqueous matrices were published in the last decade. Fenton and photo-Fenton processes, photo-peroxidation, ozonation, electrochemical advanced oxidation and heterogeneous photocatalysis are some of the AOPs applied by Brazilian research groups. Although many works discuss the importance of applying these technologies for CECs removal in real treatment plants, most of these studies assess the treatment of distilled water or simulated effluent. Therefore, the conduction of studies applying AOPs in real matrices are critical to drive the implementation of these processes coupled to conventional water and wastewater treatment in real plants in order to prevent the contamination of environmental matrices by CECs in Brazil.

Trends in Fenton and photo-Fenton processes for degradation of antineoplastic agents in water matrices: current knowledge and future challenges evaluation using a bibliometric and systematic analysis

Antineoplastic agents present potential hazards to human health and the environment. For this reason, these compounds have attracted a great deal of attention from researchers in the environmental sciences field. In order to help guide future research, it is important to understand the current state of investigation of the occurrence of these microcontaminants and methods for their removal, especially focusing on Fenton and photo-Fenton processes applied to various aqueous matrices in which this class of pharmaceuticals is present. For this purpose, a systematic review of these topics was performed by bibliometric analysis of articles published during the last decade and available in the Scopus and Web of Science databases. This study enables visualization of the current panorama and trends in this field, providing a guide for future collaborative research and exchange of knowledge. Various strategies have been suggested to improve the efficiency of Fenton and photo-Fenton processes, mainly by means of the application of multiples additions of iron, the use of heterogeneous catalysts, and/or the use of chelating agents. Some studies have evaluated different radiation sources employed for photo-Fenton processes, such as solar and/or artificial radiation. In turn, the identification of transformation products generated by Fenton and photo-Fenton treatments, together with their evaluation by in silico (Q)SAR predictions or experimental toxicological bioassays, are related subjects that have been less reported in published works and that should be studied in depth. These subjects can support treatment evaluations that are more realistic, considering their limitations or potentials.

Multi-criteria decision-making techniques associated with (Q)SAR risk assessment for ranking surface water microcontaminants identified using LC-QTOF MS

Contaminants of emerging concern (CECs) have been a focus of study for years, with investigations revealing the contamination of different environmental matrices (surface water, soil, air, and sediment) by diverse classes of microcontaminants. Understanding the contamination profiles requires identification and risk assessment of the microcontaminants. In the present work, analysis was made of the presence of 3250 compounds in 27 samples from the Conceição River (Rio Grande do Sul State, Brazil), using an SPE-LC-QTOF MS method. In total, 150 microcontaminants (confirmed and suspected) of different classes, especially pesticides and pharmaceuticals, were identified by an initial qualitative analysis. Subsequently, in silico predictions of eight endpoints, using quantitative structure-activity relationship ((Q)SAR) models, were employed to determine the risk of each previously screened microcontaminant. This large amount of (Q)SAR data, frequently with conflicting information in relation to the responses of the different endpoints, makes it difficult to define which microcontaminants should be prioritized for analysis. Therefore, in order to rank the identified microcontaminants by risk assessment, two multi-criteria decision-making (MCDM) ranking techniques (ToxPi and TOPSIS), associated with a weighting method, were performed to establish the order of priority for further quantitative analysis of the most hazardous microcontaminants. The two rankings were statistically similar, especially for the 20 highest priority microcontaminants. Nonetheless, sensitivity tests carried out for the ToxPi and TOPSIS outputs showed higher performance robustness of TOPSIS, compared to ToxPi. This is the first time that such an approach (screening/(Q)SAR/MCDM methods) has been performed in the context of microcontaminant environmental risk evaluation and demonstrated to be an available strategy to help rank the most concern microcontaminants identified in aqueous environment samples.

Electrochemical Technologies to Decrease the Chemical Risk of Hospital Wastewater and Urine

The inefficiency of conventional biological processes to remove pharmaceutical compounds (PhCs) in wastewater is leading to their accumulation in aquatic environments. These compounds are characterized by high toxicity, high antibiotic activity and low biodegradability, and their presence is causing serious environmental risks. Because much of the PhCs consumed by humans are excreted in the urine, hospital effluents have been considered one of the main routes of entry of PhCs into the environment. In this work, a critical review of the technologies employed for the removal of PhCs in hospital wastewater was carried out. This review provides an overview of the current state of the developed technologies for decreasing the chemical risks associated with the presence of PhCs in hospital wastewater or urine in the last years, including conventional treatments (filtration, adsorption, or biological processes), advanced oxidation processes (AOPs) and electrochemical advanced oxidation processes (EAOPs).

Treatment-driven removal efficiency, product formation, and toxicity evolution of antineoplastic agents: Current status and implications for water safety assessment

Antineoplastic compounds, designed for chemotherapeutic anticancer therapy, have become emerging contaminants of global concern over the past decade due to their ubiquitous occurrence, environmental persistence, and multiple adverse effects on aquatic ecosystems. Increasing efforts have been devoted to developing efficient strategies for remediating water containing these micropollutants. In this study, the physicochemical properties, natural attenuation, and chemical reactivity with aqueous oxidizing species of five antineoplastic drugs with the highest environmental prevalence (i.e., tamoxifen, cyclophosphamide, ifosfamide, 5-fluorouracil, and methotrexate) were summarized. The removal performance, transformation products (TPs) of varying structures, overall reaction pathways, and toxicity evolution during different treatments were evaluated and discussed. Additionally, the biodegradability and multi-endpoint toxicity of each TP were predicted using in silico QSAR software. Depending on their distinct inherent structures, the reactivity of the antineoplastics with oxidizing species varied, with hydroxyl radicals exhibiting unparalleled merits in rapid oxidation. Complete elimination of these contaminants was observed during oxidative treatments, but with inadequate mineralization. Notably, the increase in toxicity within multiple processes was determined based on both experimental bioassays and theoretical predictions. This may be attributed to the adverse effects induced by the large number of identified and unknown TPs individually and in combination. Together with the environmental persistence and low biodegradability of most TPs, these results necessitate the application of efficient post-treatments in conjunction with a more thorough water safety evaluation (e.g., using high-throughput screening) of the mixtures of treated water and wastewater.

Advanced Oxidation Processes Based on Sulfate Radicals for Wastewater Treatment: Research Trends

In this work, the recent trends in the application of the sulfate radical-based advanced oxidation processes (SR-AOPs) for the treatment of wastewater polluted with emerging contaminants (ECs) and pathogenic load were systematically studied due to the high oxidizing power ascribed to these technologies. Additionally, because of the economic benefits and the synergies presented in terms of efficiency in ECs degradation and pathogen inactivation, the combination of the referred to AOPs and conventional treatments, including biological processes, was covered. Finally, the barriers and limitations related to the implementation of SR-AOPs were described, highlighting the still scarce full-scale implementation and the high operating-costs associated, especially when solar energy cannot be used in the oxidation systems.

On the performance of distinct electrochemical and solar-based advanced oxidation processes to mineralize the insecticide imidacloprid

Water contamination by contaminants of emerging concern is one of the main challenges to be solved by our desired sustainable society. In the same time, different technologies for water treatment are becoming enough mature to be implemented. In this work, two different advanced oxidation processes (AOP) were investigated: i) electrochemical processes (electrochemical, photoassisted electrochemical, electro Fered-Fenton, and photo-electro Fered-Fenton - PEF-Fered) using a BDD and DSA® electrodes under UVA and UVC irradiation (9 W) and ii) solar-based AOP using four distinct oxidants (HOCl, H₂O₂, S₂O₈^2-, HSO₅^-) in the presence or absence of Fe²⁺ ions to oxidize and mineralize imidacloprid (IMD: 50 mg L^-1) containing solutions. The PEF-Fered (1.0 mM Fe²⁺ and 50 mg L^-1 h^-1 H₂O₂) under UVA or UVC irradiation and HOCl/UVC (NaCl 17 mM) processes using a BDD and DSA® electrodes (10 mA cm ^-2), respectively, performed equally well to completely oxidize and mineralize (∼90%) IMD at the expense of only ∼0.3 kWh g^-1. Low amounts and highly oxidized byproducts identified through liquid chromatography tandem mass spectrometry were observed for the HOCl/UVC process using a DSA® electrode. Concerning the solar-based AOP, all assessed oxidants (4 mM h^-1) successfully oxidized IMD within 3 h of treatment, whereas only H₂O₂ and HOCl led to significant (∼60%) TOC abatement after 6 h treatment. The use of Fe²⁺ (0.5 or 1.0 mM) had no significant improvement in the oxidation and mineralization of IMD.