Estimates of pedestrian exposure to atmospheric pollution using high-resolution modelling in a real traffic hot-spot

How do meteorological conditions impact the effectiveness of various traffic measures on NOx concentrations in a real hot-spot?

Recently, air quality has become a major concern for policy makers around the world, which has led to the implementation of mitigation measures. In particular, in urban areas most measures affect the road transport sector, as this is one of the main contributors to air pollution in those areas. Recent studies have pointed out the need to determine the importance of external factors such as the meteorological conditions on the net effect on air quality of mitigation strategies. Due to the strong spatial variability of urban air pollution, high spatial resolution modelling is necessary. In this work, the impacts on emissions and nitrogen oxides (NOx) concentrations of several mitigation strategies on a real air pollution hot spot in southern Madrid (Spain) are simulated at microscale under different meteorological conditions. The results show that the meteorological conditions affect local NOx concentrations, and its net changes can be comparable to those due to emission reductions. In particular, meteorological conditions in 2019 induced higher NOx concentrations than in 2016, despite the local emissions were reduced by 50 % from 2016 to 2019. On the other hand, the impact of the implementation of a Low Emissions Zone (LEZ) on NOx concentrations is small and consistent with values found in other LEZs around Europe. However, this impact varies up to 70 % depending on the meteorological conditions. The impacts of a mitigation strategy are largely influenced by the meteorological conditions, and therefore the achievement of the target reduction of concentrations pursued by these measures will depend on the meteorological conditions.

Impact of single and combined local air pollution mitigation measures in an urban environment

Urban air pollution is one of the most important environmental problems for human health and several strategies have been developed for its mitigation. The objective of this study is to assess the impact of single and combined mitigation measures on concentrations of air pollutants emitted by traffic at pedestrian level in the same urban environment. The effectiveness of different scenarios of green infrastructure (GI), the implementation of photocatalytic materials and traffic low emission zones (LEZ) are investigated, as well as several combinations of LEZ and GI. A wide set of scenarios is simulated through Computational Fluid Dynamics (CFD) modelling for two different wind directions (perpendicular (0°) and 45° wind directions). Wind flow for the BASE scenario without any measure implemented was previously evaluated using wind-tunnel measurements. Air pollutant concentrations for this scenario are compared with the results obtained from the different mitigation scenarios. Reduction of traffic emissions through LEZ is found to be the most effective single measure to improve local air quality. However, GI enhances the effects of LEZ, which makes the combination of LEZ + GI a very effective measure. The effectiveness of this combination depends on the GI layout, the intensity of emission reduction in the LEZ and the traffic diversion in streets surrounding the LEZ. These findings, in line with previous literature, suggest that the implementation of GI may increase air pollutant concentrations at pedestrian level for some cases. However, this study highlights that this negative effect on air quality can turn into positive when used in combination with reductions of local traffic emissions.

Using dispersion models at microscale to assess long-term air pollution in urban hot spots: A FAIRMODE joint intercomparison exercise for a case study in Antwerp

In the framework of the Forum for Air Quality Modelling in Europe (FAIRMODE), a modelling intercomparison exercise for computing NO2 long-term average concentrations in urban districts with a very high spatial resolution was carried out. This exercise was undertaken for a district of Antwerp (Belgium). Air quality data includes data recorded in air quality monitoring stations and 73 passive samplers deployed during one-month period in 2016. The modelling domain was 800 × 800 m2. Nine modelling teams participated in this exercise providing results from fifteen different modelling applications based on different kinds of model approaches (CFD - Computational Fluid Dynamics-, Lagrangian, Gaussian, and Artificial Intelligence). Some approaches consisted of models running the complete one-month period on an hourly basis, but most others used a scenario approach, which relies on simulations of scenarios representative of wind conditions combined with post-processing to retrieve a one-month average of NO2 concentrations. The objective of this study is to evaluate what type of modelling system is better suited to get a good estimate of long-term averages in complex urban districts. This is very important for air quality assessment under the European ambient air quality directives. The time evolution of NO2 hourly concentrations during a day of relative high pollution was rather well estimated by all models. Relative to high resolution spatial distribution of one-month NO2 averaged concentrations, Gaussian models were not able to give detailed information, unless they include building data and street-canyon parameterizations. The models that account for complex urban geometries (i.e. CFD, Lagrangian, and AI models) appear to provide better estimates of the spatial distribution of one-month NO2 averages concentrations in the urban canopy. Approaches based on steady CFD-RANS (Reynolds Averaged Navier Stokes) model simulations of meteorological scenarios seem to provide good results with similar quality to those obtained with an unsteady one-month period CFD-RANS simulations.

Recent advances in modeling turbulent wind flow at pedestrian-level in the built environment

Pressing problems in urban ventilation and thermal comfort affecting pedestrians related to current urban development and densification are increasingly dealt with from the perspective of climate change adaptation strategies. In recent research efforts, the prime objective is to accurately assess pedestrian-level wind (PLW) environments by using different simulation approaches that have reasonable computational time. This review aims to provide insights into the most recent PLW studies that use both established and data-driven simulation approaches during the last 5 years, covering 215 articles using computational fluid dynamics (CFD) and typical data-driven models. We observe that steady-state Reynolds-averaged Navier-Stokes (SRANS) simulations are still the most dominantly used approach. Due to the model uncertainty embedded in the SRANS approach, a sensitivity test is recommended as a remedial measure for using SRANS. Another noted thriving trend is conducting unsteady-state simulations using high-efficiency methods. Specifically, both the massively parallelized large-eddy simulation (LES) and hybrid LES-RANS offer high computational efficiency and accuracy. While data-driven models are in general believed to be more computationally efficient in predicting PLW dynamics, they in fact still call for substantial computational resources and efforts if the time for development, training and validation of a data-driven model is taken into account. The synthesized understanding of these modeling approaches is expected to facilitate the choosing of proper simulation approaches for PLW environment studies, to ultimately serving urban planning and building designs with respect to pedestrian comfort and urban ventilation assessment.

Impact of Different Combinations of Green Infrastructure Elements on Traffic-Related Pollutant Concentrations in Urban Areas

Urban air quality is a major problem for human health and green infrastructure (GI) is one of the potential mitigation measures used. However, the optimum GI design is still unclear. The purpose of this study is to provide some recommendation that could help in the design of the GI (mainly, the selection of locations and characteristics of trees and hedgerows). Aerodynamic and deposition effects of each vegetation element of different GI scenarios are investigated. Computational fluid dynamics (CFD) simulations of a wide set of GI scenarios in an idealized three-dimensional urban environment are performed. In conclusion, it was found that trees in the middle of the avenue (median strip) reduce street ventilation, and traffic-related pollutant concentrations increase, in particular for streets parallel to the wind. Trees in the sidewalks act as a barrier for pollutants emitted outside, specifically for a 45° wind direction. Regarding hedgerows, the most important effect on air quality is deposition and the effects of green walls and green roofs are limited to their proximity to the building surfaces.

Simulation of Traffic-Born Pollutant Dispersion and Personal Exposure Using High-Resolution Computational Fluid Dynamics

Road vehicles are a large contributor to nitrogen oxides (NOx) pollution. The routine roadside monitoring stations, however, may underrepresent the severity of personal exposure in urban areas because long-term average readings cannot capture the effects of momentary, high peaks of air pollution. While numerical modelling tools historically have been used to propose an improved distribution of monitoring stations, ultra-high resolution Computational Fluid Dynamics models can further assist the relevant stakeholders in understanding the important details of pollutant dispersion and exposure at a local level. This study deploys a 10-cm-resolution CFD model to evaluate actual high peaks of personal exposure to NOx from traffic by tracking the gases emitted from the tailpipe of moving vehicles being dispersed towards the roadside. The investigation shows that a set of four Euro 5-rated diesel vehicles travelling at a constant speed may generate momentary roadside concentrations of NOx as high as 1.25 mg/m3, with a 25% expected increase for doubling the number of vehicles and approximately 50% reduction when considering Euro 6-rated vehicles. The paper demonstrates how the numerical tool can be used to identify the impact of measures to reduce personal exposure, such as protective urban furniture, as traffic patterns and environmental conditions change.

Estimates of population exposure to atmospheric pollution and health-related externalities in a real city: The impact of spatial resolution on the accuracy of results

Health impacts of atmospheric pollution is an important issue in urban environments. Its magnitude depends on population exposure which have been frequently estimated by considering different approaches relating pollutant concentration and population exposed to it. However, the uncertainties due to the spatial resolution of the model used to estimate the pollutant concentration or due to the lack of representativeness of urban air quality monitoring station (AQMS) have not been evaluated in detail. In this context, NO₂ annual average concentration at pedestrian level in the whole city of Pamplona (Spain) modelled at high spatial resolution (~1 m) by Computational Fluid Dynamic (CFD) simulations is used to estimate the total population exposure and health-related externalities by using different approaches. Air pollutant concentration and population are aggregated at different spatial resolutions ranging from a horizontal grid cell size of 100 m × 100 m to a coarser resolution where the whole city is covered by only one cell (6 km × 5 km). In addition, concentrations at AQMS locations are also extracted to assess the representativeness of those AQMS. The case with a spatial resolution of 100 m × 100 m for both pollutant-concentration distribution and population data is used as a reference (Base case) and compared with those obtained with the other approaches. This study indicates that the spatial resolution of concentration and population distribution in the city should be 1 km × 1 km or finer to obtain appropriate estimates of total population exposure (underestimations <13%) and health-related externalities (underestimations <37%). For the cases with coarser resolutions, a strong underestimation of total population exposure (>31%) and health-related externalities (>76%) was found. On the other hand, the use of AQMS concentrations can induce important errors due to the limited spatial representativeness, in particular in terms of population exposure.

High Spatial Resolution Assessment of the Effect of the Spanish National Air Pollution Control Programme on Street-Level NO2 Concentrations in Three Neighborhoods of Madrid (Spain) Using Mesoscale and CFD Modelling

Current European legislation aims to reduce the air pollutants emitted by European countries in the coming years. In this context, this article studies the effects on air quality of the measures considered for 2030 in the Spanish National Air Pollution Control Programme (NAPCP). Three different emission scenarios are investigated: a scenario with the emissions in 2016 and two other scenarios, one with existing measures in the current legislation (WEM2030) and another one considering the additional measures of NAPCP (WAM2030). Previous studies have addressed this issue at a national level, but this study assesses the impact at the street scale in three neighborhoods in Madrid, Spain. NO2 concentrations are modelled at high spatial resolution by means of a methodology based on Computational Fluid Dynamic (CFD) simulations driven by mesoscale meteorological and air quality modelling. Spatial averages of annual mean NO2 concentrations are only estimated to be below 40 µg/m3 in all three neighborhoods for the WAM2030 emission scenarios. However, for two of the three neighborhoods, there are still zones (4–12% of the study areas) where the annual concentration is higher than 40 µg/m3. This highlights the importance of considering microscale simulations to assess the impacts of emission reduction measures on urban air quality.