Selective adsorption of ofloxacin and ciprofloxacin from a binary system using lignin-based adsorbents: Quantitative analysis, adsorption mechanisms, and structure-activity relationship

Solvent-free synthesis of defective Zr-based metal-organic framework from waste plastic bottles for highly efficient lomefloxacin removal

Large amount of polyethylene terephthalate (PET) plastics waster and emerging contaminants in water, including fluoroquinolone antibiotics, pose challenges to human survival. In this work, a green synthesis scheme is proposed in which the defective UiO-66 (d-UiO-66) is fabricated via a solvent-free routine by using PET plastics waster as raw materials for lomefloxacin (LOM) removal. In comparison with defect-free UiO-66, the created defect imparts d-UiO-66 with higher porosity and abundant defective Zr sites, which are beneficial to boost LOM adsorption. As expected, d-UiO-66 exhibited excellent LOM adsorption performances, showcasing a saturation adsorption capacity of 588 mg g-1 and a kinetic rate constant of 0.204 g mg-1 h-1, which are 3.5 and 2.0 times higher than those of the pristine UiO-66, respectively. Remarkably, the LOM saturation adsorption capacity of d-UiO-66 surpasses that of all reported adsorbents. Mechanism study reveals that this outstanding adsorption performance of d-UiO-66 is mainly ascribed to the abundant defective sites, high porosity, together with the strong hydrogen bonding interaction and π-π stacking interaction between d-UiO-66 and LOM. Therefore, the d-UiO-66 obtained by the solvent-free method can not only effectively upcycle PET plastic waster, but also efficiently remove LOM, demonstrating a potential routine to simultaneous address the solid PET waster and wastewater.

Surface modified of chitosan by TiO2@MWCNT nanohybrid for the efficient removal of organic dyes and antibiotics

Considering the increase in the discharge of industrial effluents containing dyes and antibiotic resistance as a consequence of increasing the prescription and easy distribution of antibiotic drugs at the global level, designing efficient, biodegradable and non-toxic absorbents is necessary to reduce environmental harm effects. Herein, we present a series of novel eco-friendly ternary hybrid nanocomposite hydrogels CS/TiO2@MWCNT (CTM) composed of chitosan (CS), TiO2, and multiwalled carbon nanotube (MWCNT) for removal of methylene blue (MB) and methyl orange (MO) and common antibiotic ciprofloxacin (CIP) in aqueous medium. The combination of MWCNT and TiO2 improves the physicochemical properties of CS hydrogel and increases the adsorption capacity toward pollutants in the presence of different loadings. CTM hydrogel showed a specific surface area of 236.45 m2 g-1 with a pore diameter of 7.89 nm. Adsorption mechanisms were investigated in detail using kinetic, isotherm, and thermodynamic studies of adsorption as well as various spectroscopic techniques. Adsorption of these pollutants by CTM nanocomposite hydrogel occurred using various interactions at different pHs, which showed the obvious dependence of CTM adsorption capacity on pH. Electrostatic attractions, complex formation, π-π stacking and hydrogen bonds played a key role in the adsorption process. The adsorption of MB, MO, and CIP was fitted with the Langmuir isotherm with maximum adsorption capacities of 531.91, 1763.6, and 1510.5 mg g-1, respectively. CTM had a minor decrease in adsorption strength and showed good structural stability even after 8 adsorptions-desorption cycles. The total cost of producing a 1 kg adsorbent was calculated to be $ 450, which helped us determine the economic feasibility of the adsorbent in large-scale applications.

Lignocellulosic biomass for biochar production: A green initiative on biowaste conversion for pharmaceutical and other emerging pollutant removal

Lignocellulosic waste generation and their improper disposal has accelerated the problems associated with increased greenhouse gas emissions and associated environmental pollution. Constructive ways to manage and mitigate the pollution associated with lignocellulosic waste has propelled the research on biochar production using lignocellulose-based substrates. The sustainability of various biochar production technologies in employing lignocellulosic biomass as feedstock for biochar production not only aids in the lignocellulosic biomass valorization but also helps in carbon neutralization and carbon utilization. Functionalization of biochar through various physicochemical methods helps in improving their functional properties majorly by reducing the size of the biochar particles to nanoscale and modifying their surface properties. The usage of engineered biochar as nano adsorbents for environmental applications like dye absorption, removal of organic pollutants and endocrine disrupting compounds from wastewater has been the thrust areas of research in the past few decades. This review presents a comprehensive outlook on the up-to-date research findings related to the production and engineering of biochar from lignocellulosic biomass and their applications in environmental remediation especially with respect to wastewater treatment. Further a detailed discussion on various biochar activation methods and the future scope of biochar research is presented in this review work.

Adsorption, natural attenuation, and microbial community response of ofloxacin and oxolinic acid in marine sediments

The pollution of quinolone antibiotics in the marine environment has attracted widespread attention, especially for ofloxacin (OFL) and oxolinic acid (OXO) due to their frequent detection. However, few studies have been conducted to assess the behaviors and microbial community response to these antibiotics in marine sediments, particularly for potential antibiotic-resistant bacteria. In this work, the adsorption characteristics, natural attenuation characteristics, and variation of microbial communities of OFL and OXO in marine sediments were investigated. The adsorption process of antibiotics in sediments occurred on the surface and internal pores of organic matter, where OFL was more likely to be transferred from seawater to sediment compared with OXO. Besides, the adsorption of two antibiotics on sediment surfaces was attributed to physisorption (pore filling, electrostatic interaction) and chemisorption (hydrogen bonding). The natural attenuation of OFL and OXO in marine sediment followed second-order reaction kinetics with half-lives of 6.02 and 26.71 days, respectively, wherein biodegradation contributed the most to attenuation, followed by photolysis. Microbial community structure in marine sediments exposure to antibiotics varied by reducing abundance and diversity of microbial communities, as a whole displaying as an increase in the relative abundance of Firmicutes whereas a decrease of Proteobacteria. In detail, Escherichia-Shigella sp., Blautia sp., Bifidobacterium sp., and Bacillus sp. were those antibiotic-resistant bacteria with potential ability to degrade OFL, while Bacillus sp. may be resistant to OXO. Furthermore, functional predictions indicated that the microbial communities in sediment may resist the stress caused by OFL and OXO through cyano-amino acid metabolism, and ascorbate and aldarate metabolism, respectively. The research is key to understanding fate and bacterial resistance of antibiotics in marine sediments.

Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review

Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.

Ecotoxicological effects of antibiotic adsorption behavior of microplastics and its management measures

Microplastics adsorb heavy metals and organic pollutants to produce combined pollution. Recently, the adsorption behavior of antibiotics on microplastics has received increasing attention. Exploring the sorption behavior of pollutants on microplastics is an important reference in understanding their ecological and environmental risk studies. In this paper, by reviewing the academic literature in recent years, we clarified the current status of research on the adsorption behavior of antibiotics on microplastics, discussed its potential hazards to ecological environment and human health, and summarized the influence of factors on the adsorption mechanisms. The results show that the adsorption behavior of antibiotics on microplastics is controlled by the physical and chemical properties of antibiotics, microplastics, and water environment. Antibiotics are adsorbed on microplastics through physical and chemical interactions, which include hydrophobic interaction, partitioning, electrostatic interaction, and other non-covalent interactions. Intensity of adsorption between them is mainly determined by their physicochemical properties. The basic physicochemical properties of the aqueous environment (e.g., pH, salinity, ionic strength, soluble organic matter content, and temperature) will affect the physicochemical properties of microplastics and antibiotics (e.g., particle size, state of dispersibility, and morphology), leading to differences in the type and strength of their interactions. This paper work is expected to provide a meaningful perspective for better understanding the potential impacts of antibiotic adsorption behavior of microplastics on aquatic ecology and human health. In the meantime, some indications for future related research are provided.

Removal of the Water Pollutant Ciprofloxacin Using Biodegradable Sorbent Polymers Obtained from Polysaccharides

Water use has been increasing globally by 1% per year, and recycling and re-use are critical issues compromised by the presence of pollutants. In this context, the design of novel materials and/or procedures for the large scale-removal of pollutants must be economically and environmentally feasible in order to be considered as part of the solution by emerging economies. We demonstrate that the cross-linking of biodegradable polysaccharides such as starch, dextrin, or dextrin and β-cyclodextrin with divinyl sulfone is an innovative strategy for synthesizing insoluble and eco-friendly sorbent polymers, including pSt, pDx and pCD-Dx. The evaluation of these polymers' ability to remove ciprofloxacin (CIP), a prime example of antibiotic pollution, revealed that pSt, with a Kd of 1469 L/kg and a removal rate higher than 92%, is a favorable material. Its sorption is pH-dependent and enhanced at a mildly alkaline pH, allowing for the desorption (i.e., cleaning) and reuse of pSt through an environmentally friendly treatment with 20 mM AcONa pH 4.6. The facts that pSt (i) shows a high affinity for CIP even at high NaCl concentrations, (ii) can be obtained from affordable starting materials, and (iii) is synthesized and regenerated through organic, solvent-free procedures make pSt a novel sustainable material for inland water and seawater remediation, especially in less developed countries, due to its simplicity and low cost.

Synthesis and Characterization of Thermally Stable Lignosulfonamides

Lignin, a highly aromatic macromolecule building plant cells, and cellulose are two of the most commonly occurring natural polymers. Lignosulfonate is a grade of technical lignin, obtained as a by-product in the paper and wood pulping industries, a result of the used lignin isolation method, i.e., sulfite process. In this work, sodium lignosulfonate is used as a starting material to manufacture sulfonamide derivatives of lignin in a two-step modification procedure. Since this direction of the lignin modification is rather rarely investigated and discussed, it makes a good starting point to expand the state of knowledge and explore the properties of lignosulfonamides. Materials obtained after modification underwent characterization by FTIR, SS-NMR, WAXD, SEM, and TGA. Spectroscopic measurements confirmed the incorporation of dihexylamine into the lignin structure and the formation of lignosulfonamide. The crystalline structure of the material was not affected by the modification procedure, as evidenced by the WAXD, with only minute morphological changes of the surface visible on the SEM imaging. The obtained materials were characterized by improved parameters of thermal stability in relation to the raw material. As-prepared sulfonamide lignin derivatives with a potential application as a filler in biopolymeric composites may become a new class of functional, value-added, sustainable additives.

Quantitative assessment of interactions of hydrophilic organic contaminants with microplastics in natural water environment

The interaction between microplastics (MPs) and hydrophilic organic contaminants (HOCs) in natural water environment has recently raised great public attentions due to the potential toxicity to humans. However, the quantitative assessment is less studied. In this study, the interaction between ciprofloxacin (CIP) and ofloxacin (OFL) (two important HOCs) and virgin and aged polystyrene (PS) was investigated. The aged PS showed higher adsorption rate and capacity than the virgin PS, due to its larger surface area and more O-containing groups. The pH-dependent adsorption of CIP was higher than OFL on both virgin and aged PS; the maximum adsorption for both HOCs occurred at pH 5. The sequential orders of functional groups for the adsorption were discovered according to the study by the 2D correlation Fourier transform infrared spectroscopy. Several mechanisms existed for the interaction: (1) at 3.0 < pH < 5.0, the electrostatic attraction (EA) was inhibited while H-bond (HB) was dominant, accounting for > 60% of the total uptake; (2) at 5.0 < pH < 8.0, the contribution of EA increased to around 50-60% while HB decreased to 30-40%; (3) at 8.0 < pH < 10.0, EA, HB and π-π conjugation caused 30-40%, 25-40% and 20-45% of the total uptake, respectively; (4) at 10.0 < pH < 12.0, π-π conjugation accounted for 90-100%. Notably, higher adsorption of CIP was mainly attributed to the presence of secondary amino groups and its higher pK_a value, correspondingly leading to the additional ordinary HB and negative charge-assisted HB, and EA interactions with PS. This study further provides clear evidences on the risk of MPs and HOCs on humans and aqueous living organisms.

Graphene oxide modified κ-carrageenan/sodium alginate double-network hydrogel for effective adsorption of antibiotics in a batch and fixed-bed column system

The treatment of antibiotic wastewater pollution is imminent, the studies of double-network hydrogels as adsorbents have gradually increased, it is quite important to develop a non-toxic hydrogel with excellent properties as adsorbent. In this study, a graphene oxide modified κ-carrageenan/sodium alginate (GO-κ-car/SA) gel was prepared by calcium hardening. The addition of GO nanosheets enhances the mechanical strength and anti-swelling property of the double-network hydrogel, making it possible for the application in the fixed-bed column system. The elastic modulus is twice as much as the hydrogel without GO. The maximum adsorption capacity in the experiments of the GO-κ-car/SA gel for CIP and OFL can reach 272.18 mg g^-1 and 197.39 mg g^-1, respectively. The GO-κ-car/SA gel always remains negatively charged, which means that the adsorption capacity of the gel is better in an acidic environment. In the fixed-bed column system, through Thomas fitting, the maximum adsorption capacity of the simulated OFL wastewater (200 mg L^-1) is 83.99 mg g^-1. The adsorption mechanism of antibiotics by GO-κ-car/SA gel depends on hydrogen bond, functional groups and electrostatic adsorption. The good hydrophilic properties, excellent adsorption capacity and high mechanical strength, which can ensure that the adsorbent is in full contact with the contaminants without major deformation or damage, makes the study more helpful for the further study on hydrogel in the fixed-bed column system.

Preparation, adsorption performance and mechanism of MgO-loaded biochar in wastewater treatment: A review

Biochar is a low cost, porous and solid material with an extremely high carbon content, various types of functional groups, a large specific surface area and many other desirable characteristics. Thus, it is often used as an adsorbent or a loading matrix. Nano-magnesium oxide is a crystalline material with small particles and strong ion exchangeability. However, due to the high surface chemical energy, it easily forms agglomerates of particles. Therefore, to combine the advantages of biochar and magnesium, metal magnesium nanoparticles can be loaded onto the surface of biochar with different modification techniques, resulting in biochars with low cost and high adsorption performance to be used as an adsorption matrix (collectively referred to as Mg@BC). This review presents the effects of different Mg@BC preparation methods and synthesis conditions and summarizes the removal capabilities and adsorption mechanisms of Mg@BC for different types of pollutants in water. In addition, the review proposes the prospects for the development of Mg@BC to solve various problems in the future.

Chemical Transformation of Lignosulfonates to Lignosulfonamides with Improved Thermal Characteristics

Lignin is an abundantly occurring aromatic biopolymer that receives increasing attention as, e.g., a biofiller in polymer composites. Though its structure depends on the plant source, it is a valuable component showing biodegradability, antioxidant, and ultra-violet (UV) absorption properties. Lignosulfonates, a by-product of the paper and pulping industries formed as a result of the implementation of the sulfite process, have been used in the presented study as a raw material to obtain a sulfonamide derivative of lignin. Hereby, a two-step modification procedure is described. The obtained materials were investigated by means of FTIR, WAXD, SS-NMR, SEM, and TGA; the results of spectroscopic investigations confirm the formation of a sulfonamide derivative of lignin via the proposed modification method. The obtained modified lignin materials showed significantly improved thermal stability in comparison with the raw material. The internal structure of the lignosulfonate was not altered during the modification process, with only slight changes of the morphology, as confirmed by the WAXD and SEM analyses. The manufactured sulfonamide lignin derivatives show great promise in the potential application as an antibacterial filler in advanced biopolymeric composites.

π-π stacking derived from graphene-like biochar/g-C3N4 with tunable band structure for photocatalytic antibiotics degradation via peroxymonosulfate activation

The severe pollution caused by antibiotics has raised serious concerns in recent decades. In this study, graphene-like Enteromorpha biochar modified g-C₃N₄ (BC/CN) was synthesized and applied to degrade tetracycline by activating PMS under visible light, obtaining around 90% removal rate within 1 h. The Enteromorpha biochar can provide electron-withdrawing groups to adjust the electronic structure of g-C₃N₄, and induces more π-π interaction to decline the recombination of photocarriers. The environmental adaptability of the BC/CN/PMS/vis system was confirmed by the TC degradation in different initial pH, coexisting ions, and natural organic materials. In most cases, the system maintained over 78% degradation rate. The kinetics and mechanism of the system indicating that ∙O₂^-, ¹O₂ contributed more to the TC photocatalytic degradation than ∙OH, SO₄∙^-, and h⁺. During the process, TC underwent serials hydroxylation, demethylation, and ring-opening processes, and produced more than 40 intermediates in three pathways. Moreover, the BC/CN/PMS/vis system was proved to have at least a 50% degradation rate for more tetracyclines and quinolone antibiotics with the same condition.

Effects of environmental aging on the adsorption behavior of antibiotics from aqueous solutions in microplastic-graphene coexisting systems

The extensive use of nanofillers, such as graphene oxide (GO) and reduced graphene oxide (rGO), as plastic additives has led to the coexistence of microplastics (MPs) and nanomaterials in aquatic environments. However, there is a lack of studies on the adsorption behavior of MPs when coexisting with GO. Moreover, MPs and GO are prone to undergoing aging processes in real environments under conditions such as sunlight exposure, which changes their physicochemical properties and affects their adsorption behavior. In this study, the aging processes of MPs and GO in a real environment were simulated by ultraviolet (UV) irradiation and thermal treatments, respectively. The adsorption behavior of ciprofloxacin (CIP) on three types of MPs (polypropylene (PP), polyamide (PA), and polystyrene (PS)) before and after aging was explored. The MPs are ordered in terms of CIP adsorption capacity as aged-PA > aged-PS > aged-PP > PA > PP > PS, and the adsorption capacity of aged MPs was approximately twofold higher than that of pristine MPs. This paper also studied the adsorption performance of antibiotics in a coexisting system of aged MPs and GO/rGO, and the tetracycline (TC) adsorption capacity was increased by ~336% in aged PP-GO and ~100% in an aged PP-rGO coexisting system. GO/rGO with high degree of oxidation and concentration in an aged- PP-GO/rGO coexisting system are more conducive to the TC adsorption, due to the contribution of oxygen-containing functional groups. Surface and partition adsorption co-occurred during the TC adsorption process. The TC adsorption behavior in the MPs-GO/rGO coexisting system was strongly dependent on the solution pH, which was more favorable under acidic (pH = 3) or alkaline (pH = 11) conditions. This study improves the understanding of the environmental behavior of MPs, graphene, and antibiotics and guides research on strategies for preventing the migration of antibiotics in MPs-GO/rGO coexisting systems.

Decoration of amine functionalized zirconium metal organic framework/silver iodide heterojunction on carbon fiber cloth as a filter- membrane-shaped photocatalyst for degrading antibiotics

The development of recyclable photocatalyst with high adsorption and excellent photocatalytic performance has attracted considerable attention. Herein, we report a three-component photocatalyst by constructing porous amine functionalized zirconium metal organic framework (UiO-66-NH₂) and broad photo-responsive AgI on flexible carbon fiber cloth (CFC). UiO-66-NH₂ nanoparticles (200-400 nm) were in-situ grown on the surface of CFC (16.5 ± 0.5 μm, 4 × 4 cm²) by a solvothermal route, then AgI particles (50-100 nm) were synthesized on CFC/UiO-66-NH₂ via a modified chemical bath deposition method. The obtained CFC/UiO-66-NH₂/AgI can effectively adsorb 19.0% levofloxacin (LVFX) or 18.4% ciprofloxacin (CIP) in 60 min in the dark and degrade 84.5% LVFX or 79.6% CIP in 120 min under visible light irradiation. Furthermore, the filter-membrane-shaped CFC/UiO-66-NH₂/AgI can be utilized to treat the flowing sewage (CIP, 10 mg/L, ~1 L/h), and the removing efficiency of CIP reached 71.0% after 10 grades. Therefore, this work demonstrates the huge application prospect of recyclable CFC/UiO-66-NH₂/AgI with high adsorption and photocatalytic capacity in flowing sewage treatment under visible light illumination.