Advancing the treatment of primary influent and effluent wastewater during wet weather flow by single versus powdered activated carbon-catalyzed ozonation for the removal of trace organic compounds

Predicting wastewater treatment plant influent in mixed, separate, and combined sewers using nearby surface water discharge for better wastewater-based epidemiology sampling design

For wastewater sample collection approaches supporting public health applications, few high hydrologic activity normalizing guidelines currently consider readily available environmental flow data that may earlier capture information regarding periods of influent mixing and dilution of wastewater with groundwater and runoff. This study aimed to identify wastewater sampling rules for high hydrological activity events, allowing for an earlier decision point in the control of dilution before sample collection. We defined the sampling rules via data-driven models (Random Forest and linear regression) using environmental data (i.e., wastewater treatment facility influent rates, nearby stream discharge flow, and precipitation). These models were applied to five treatment plants in Jefferson County, Kentucky (USA) in mixed, separate, and combined sewers with different population sizes. We proposed cutoffs of 10 %, 25 %, and 50 % flow conditions for orientation towards public health samples. The results showed a strong nonlinear relationship between nearby stream discharge and treatment facility flow rates, which was used to infer the hydrological conditions that produce high volumes of diluted wastewater in the sewer system. Accumulated Local Effects and SHapley Additive exPlanations aided in deciphering the relationship between the predictors and response variables of the Random Forest models. The influent rate to the treatment plant from the previous day and two USGS stream gages were needed to adequately predict the degree of infiltration and inflow mixing on a given day. Surface water discharge data can be used to provide an earlier workflow decision point during wet weather periods to improve understanding of flow conditions for wastewater-based epidemiological studies to inform laboratory analysis and data interpretation. Not only total flow, but also the specific proportions of infiltration and inflow to wastewater volume in influent should be considered when analyzing data for normalization purposes, and our method provides a starting point for doing so rapidly and at low cost.

Removal of organic pollutants in shale gas fracturing flowback and produced water: A review

Shale gas has been developed as an alternative to conventional energy worldwide, resulting in a large amount of shale gas fracturing flowback and produced water (FPW). Previous studies focus on total dissolved solids reduction using membrane desalination. However, there is a lack of efficient and stable techniques to remove organic pollutants, resulting in severe membrane fouling in downstream processes. This review focuses on the concentration and chemical composition of organic matter in shale gas FPW in China, as well as the hazards of organic pollutants. Organic removal techniques, including advanced oxidation processes, coagulation, sorption, microbial degradation, and membrane treatment are systematically reviewed. In particular, the influences of high salt on each technique are highlighted. Finally, different treatment techniques are evaluated in terms of energy consumption, cost, and organic removal efficiency. It is concluded that integrated coagulation-sorption-Fenton-membrane filtration represents a promising treatment process for FPW. This review provides valuable information for the feasible design, practical operation, and optimization of FPW treatment.

Validation of a modified IDEXX defined-substrate assay for detection of antimicrobial resistant E. coli in environmental reservoirs

The emergence of antimicrobial resistant (AMR) bacteria has been identified as one of the principal public health threats of the 21st century. The World Health Organization (WHO) has long recognized the threat of AMR bacteria and highlights environmental surveillance as a key step in understanding and combating the global rise of antimicrobial resistance. Here, we modified and validated an IDEXX defined-substrate assay commonly used for recreational water quality monitoring of E. coli to enumerate cefotaxime resistant E. coli in environmental reservoirs. We then applied this method to understand AMR trends in multiple environmental matrices over time. This modified IDEXX assay performed highly similarly to two widely accepted plating methods (TBX and MacConkey agar) for enumerating AMR bacteria in pure culture samples and environmental matrices, indicating it is a valid method for enumerating AMR E. coli in the environment. We detected AMR E. coli in urban surface water (63%, 15/24 samples), surface soil (35%, 8/23), and waterfowl feces (43%, 3/7). Sampling around a heavy rain event also revealed that concentrations of AMR E. coli and total E. coli co-vary over time in both surface water and surface soil. This novel method can reliably be performed outside of a laboratory setting and has very low equipment requirements, meaning it has tremendous potential to bolster global monitoring efforts, particularly in resource-restricted and highly rural settings.

Improvement of wastewater and water quality via a full-scale ozonation plant? - A comprehensive analysis of the endocrine potential using effect-based methods

Micropollutants (MPs), especially endocrine disrupting compounds (EDCs), are mainly released from WWTPs into surface water bodies and can subsequently lead to adverse effects in biota. Treatment with ozone proved to be a suitable method for eliminating such MPs. This method was implemented at the WWTP Aachen-Soers by commissioning the largest full-scale ozonation plant in Europe at the moment. Recently, effect-based methods (EBMs) have been successfully proved for compliance monitoring, e.g. estrogenic compounds. Therefore, the impact of ozone treatment on endocrine potential (agonistic and antagonistic) of treated wastewater was investigated using the ERα- and AR CALUX assays. Additionally, the impact on the receiving stream and a potential preload of the water body was assessed. Therefore, the current study could deal as a case study for small rivers being highly impacted by WWTPs. The estrogenic potential was nearly fully eliminated after ozone treatment. Contrary, the antagonistic (anti-estrogenic and anti-androgenic) potential did not show a clear elimination pattern after ozone treatment independent of the applied ozone dosage and control system. Therefore, further investigations are required regarding the antagonistic potential. Additionally, preloading of the receiving stream was found during the study period. One significant impact is a rain overflow basin (ROB) located upstream of the WWTP effluent. The highest endocrine potential was found after a ROB overflow (2.7 ng EEQ/L, 2.4 μg TMX-EQ/L, 104 μg FLU-EQ/L), suggesting that such runoff events after a heavy rainfall may act as a driver of endocrine loading to the water body. This manuscript contributes significantly to the basic understanding of the efficiency of eliminating the endocrine potential of ozone treatment by, e.g., showing that there is a further need for improving the removal efficiency of antagonistic potential. Moreover, it highlights the need to include other point sources, such as ROBs, to assess polluted surface waters comprehensively.

Comparison of pharmaceutical removal in two membrane bioreactors with/without powdered activated carbon addition

The present study investigates the removal of six selected pharmaceuticals from municipal wastewater in two membrane bioreactors (MBRs) with and without powdered activated carbon (PAC) addition. Two approaches were carried out for obtaining different carbon dosages related to the influent: (1) with a fixed solids retention time (SRT) and varying PAC concentrations; (2) with varying SRTs and a fixed PAC concentration. The results reveal that a PAC dosage related to influent of 21 mg L⁻¹ and SRT of 20 d are optimal. The first approach achieved a better removal performance than the second. The removal of amidotrizoic acid (up to 46%), bezafibrate (>92%) and iopromide (around 85%) were mainly caused by biological process, but were also enhanced by PAC addition. Efficient removal (>95%) of sulfamethoxazole, carbamazepine and diclofenac were highly dependent on the PAC dosage. However, carbamazepine shows re-metabolization properties during biological processing. Decreasing the SRT as done in the second approach, not only increased the PAC amount, but also decreased the mass of activated sludge and reduced the capability to degrade complex organic matter. Consequently, biodegradability and adsorbability played decisive roles in the removal of each compound.

The present study investigates the removal of six selected pharmaceuticals from municipal wastewater in two membrane bioreactors (MBRs) with and without powdered activated carbon (PAC) addition.

Instructive analysis of engineered carbon materials for potential application in water and wastewater treatment

Water remediation is an essential component for sustainable development. Increasing population and rapid industrialization have contributed to the deterioration of water resources. In particular, effluents from chemical, pharmaceutical, petroleum industries, and anthropogenic activities have led to severe ecological degradation. Many of these detrimental pollutants are highly toxic even at low concentrations, acting as carcinogens and inflicting severe long-lasting effects on human health. This review underscores the potential applications of engineered carbon-based materials for effective wastewater treatment. It focuses on the performance as well as efficiency of activated carbon, graphene nanomaterial, and carbon nanotubes, both with and without chemical functionalization. Plausible mechanisms of action between the chemically functionalized adsorbent and pollutants are also discussed. Based on the keywords from the literature published in the recent five years, a statistical practicality-vs-applicability analysis of these three materials is also provided. The review will provide a deep understanding of the physical or chemical interactions of the wastewater pollutants with carbon materials.

A Review on the Removal of Carbamazepine from Aqueous Solution by Using Activated Carbon and Biochar

Carbamazepine (CBZ), one of the most used pharmaceuticals worldwide and a Contaminant of Emerging Concern, represents a potential risk for the environment and human health. Wastewater treatment plants (WWTPs) are a significant source of CBZ to the environment, polluting the whole water cycle. In this review, the CBZ presence and fate in the urban water cycle are addressed, with a focus on adsorption as a possible solution for its removal. Specifically, the scientific literature on CBZ removal by activated carbon and its possible substitute Biochar, is comprehensively scanned and summed up, in view of increasing the circularity in water treatments. CBZ adsorption onto activated carbon and biochar is analyzed considering several aspects, such as physicochemical characteristics of the adsorbents, operational conditions of the adsorption processes and adsorption kinetics and isotherms models. WWTPs usually show almost no removal of CBZ (even negative), whereas removal is witnessed in drinking water treatment plants through advanced treatments (even >90%). Among these, adsorption is considered one of the preferable methods, being economical and easier to operate. Adsorption capacity of CBZ is influenced by the characteristics of the adsorbent precursors, pyrolysis temperature and modification or activation processes. Among operational conditions, pH shows low influence on the process, as CBZ has no charge in most pH ranges. Differently, increasing temperature and rotational speed favor the adsorption of CBZ. The presence of other micro-contaminants and organic matter decreases the CBZ adsorption due to competition effects. These results, however, concern mainly laboratory-scale studies, hence, full-scale investigations are recommended to take into account the complexity of the real conditions.

Catalytic ozonation for metoprolol and ibuprofen removal over different MnO2 nanocrystals: Efficiency, transformation and mechanism

Manganese dioxide has been widely recognized as catalyst in catalytic ozonation for organic pollutants removal from wastewater in recent decades. However, few studies focus on the structure-activity relationship of MnO₂ and catalytic ozonation mechanism in water. In the present study, the oxidative reactivity of three different crystal phases of MnO₂ corresponding to α-MnO₂, β-MnO₂ and γ-MnO₂ towards metoprolol (MET) and ibuprofen (IBU) were evaluated. α-MnO₂ was found to contain the most abundant oxygen vacancy and readily reducible surface adsorbed oxygen (O^2-, O^-, OH^-), which facilitated an increase of ozone utilization and the highest catalytic performance with 99% degradation efficiency for IBU and MET. α-MnO₂ was then selected to investigate the optimum key operating parameters with a result of catalyst dosage 0.1 g/L, ozone dosage 1 mg/min and an initial pH 7. The introduction of α-MnO₂ promoted reactive oxygen species (O^2-, O^-, OH^-) generation which played significant roles in IBU degradation. Probable degradation pathways of MET and IBU were proposed according to the organic intermediates identified and the reaction sites based on density function theory (DFT) calculations. The present study deepened our understanding on the MnO₂ catalyzed ozonation and provided reference to enhance the process efficiency.

Treatment of a mixture of pharmaceuticals, herbicides and perfluorinated compounds by powdered activated carbon and ozone: Synergy, catalysis and insights into non-free OH contingent mechanisms

Powdered activated carbon (PAC) is a strong adsorbent also capable of catalyzing ozonation processes. Ozone (O₃) and PAC were simultaneously applied to treat a mixture of 17 micropollutants (MPs) at low concentrations, including 13 compounds that were studied for the first time by simultaneous addition of O₃ and PAC system. Synergy and catalysis improved the removals and specific degradation rates of MPs in the first minute of the treatment. Radical probing experiments showed that scavenging hydroxyl radicals (OH) did not have a significant impact on the removals, while scavenging other reactive oxygen species was more influential. A detailed study by electron paramagnetic resonance spectroscopy ascertained that the decomposition of ozone in presence of PAC at neutral pH did not boost the generation of free OH. Instead, adsorbed OH was likely produced as PAC-HO along with other oxidizing species resulting from adsorbed singlet oxygen and superoxide radicals.