The roles of HO•, ClO• and BrO• radicals in caffeine degradation: A theoretical study

Formation of halonitromethanes from different nitrophenol compounds during UV/post-chlorination: Impact factors, DFT calculation, reaction mechanisms, and toxicity

As ubiquitous chemical substances in water bodies, nitrophenol compounds (NCs) can form chlorinated halonitromethanes (Cl-HNMs) in the chlorination process. This work chose six typical NCs to explore Cl-HNMs produced during the UV/post-chlorination process, and Cl-HNMs yields from these NCs followed the increasing order of 4-, 2-, 2-amino-3-, 2-methyl-3-, 3-, and 2-chloro-3-nitrophenol. The Cl-HNMs yields increased continually or increased firstly and declined with post-chlorination time. Increasing chlorine dosage favored Cl-HNMs formation, while excessive chlorine dosage decreased Cl-HNMs produced from 2- and 4-nitrophenol. Besides, appropriate UV radiation, acidic pH, and higher precursor concentrations facilitated Cl-HNMs formation. Then, the reaction mechanisms of Cl-HNMs generated from these different NCs were explored according to density functional theory calculation and identified transformation products (TPs), and the main reactions included chlorine substitution, benzoquinone compound formation, ring opening, and bond cleavage. Moreover, the Cl-HNMs generated from 2-chloro-3-nitrophenol were of the highest toxicity, and the six NCs and their TPs also presented ecotoxicity. Finally, two kinds of real waters were used to explore Cl-HNMs formation and toxicity, and they were significantly distinguishable compared to the phenomena observed in simulated waters. This work will give new insights into Cl-HNMs formation from different NCs in water disinfection processes and help better apply the UV/post-chlorination process to water treatments.

Reaction mechanisms of chlorinated disinfection byproducts formed from nitrophenol compounds with different structures during chlor(am)ination and UV/post-chlor(am)ination

Nitrophenol compounds (NCs) have high formation potentials of disinfection byproducts (DBPs) in water disinfection processes, however, the reaction mechanisms of DBPs formed from different NCs are not elucidated clearly. Herein, nitrobenzene, phenol, and six representative NCs were used to explore the formation mechanisms of chlorinated DBPs (Cl-DBPs) during chlor(am)ination and UV/post-chlor(am)ination. Consequently, the coexistence of nitro and hydroxy groups in NCs facilitated the electrophilic substitution to produce intermediates of Cl-DBPs, and the different positions of nitro and hydroxy groups also induced different yields and formation mechanisms of Cl-DBPs during the chlorination and UV/post-chlorination processes. Besides, the amino, chlorine, and methyl groups significantly influenced the formation mechanisms of Cl-DBPs during the chlorination and UV/post-chlorination processes. Furthermore, the total Cl-DBPs yields from the six NCs followed a decreasing order of 2-chloro-3-nitrophenol, 3-nitrophenol, 2-methyl-3-nitrophenol, 2-amino-4-nitrophenol, 2-nitrophenol, and 4-nitrophenol during chlorination and UV/post-chlorination. However, the total Cl-DBPs yields from the six NCs during chloramination and UV/post-chloramination followed a quite different order, which might be caused by additional reaction mechanisms, e.g., nucleophilic substitution or addition might occur to NCs in the presence of monochloramine (NH2Cl). This work can offer deep insights into the reaction mechanisms of Cl-DBPs from NCs during the chlor(am)ination and UV/post-chlor(am)ination processes.

Theoretical studies on the aqueous phase and graphene heterogeneous degradation of acrylamide and acrylonitrile by HO, ClO, and BrO radicals

The newly discovered ClO• and BrO• contribute to pollutant degradation in advanced oxidation processes, while acrylamide (AM) and acrylonitrile (ACN) are always the focus of scientists concerned due to their continuous production and highly toxic effects. Moreover, various particles with a graphene-like structure are the companions of AM/ACN in dry/wet sedimentation or aqueous phase existence, which play an important role in heterogeneous oxidation. Thus, this work focuses on the reaction mechanism and environmental effect of AM/ACN with ClO•/BrO•/HO• in the water environment under the influence of graphene (GP). The results show that although the reactivity sequence of AM and ACN takes the order of with HO• > with BrO• > with ClO•, the easiest channel always occurs at the same C-position of the two reactants. The reaction rate constants (k) of AM with three radicals are 2 times larger than that with ACN, and amide groups have a better ability to activate CC bonds than cyanide groups. The existence of GP can accelerate the target reaction, and the k increased by 9-13 orders of magnitude. The toxicity assessment results show that the toxic effect of most products is lower than that of parent compounds, but the environmental risk of products from ClO•/BrO•-adducts is higher than those from HO•-adducts. The oxidative degradation process based on ClO• and BrO• deserves special attention, and the catalytic effect of GP and its derivatives on the oxidation process is non-negligible.

Comparative analysis of chlorinated disinfection byproducts formation from 4-nitrophenol and 2-amino-4-nitrophenol during UV/post-chlorination

Nitrophenol compounds (NCs) are widely distributed in water environments and regarded as important precursors of disinfection byproducts (DBPs). Herein, 4-nitrophenol and 2-amino-4-nitrophenol were selected as representative NCs to explore chlorinated DBPs (Cl-DBPs) formation during UV/post-chlorination. Dichloronitromethane (DCNM), trichloronitromethane (TCNM), dichloroacetonitrile (DCAN), and trichloromethane (TCM) were formed from 4-nitrophenol and 2-amino-4-nitrophenol during UV/post-chlorination, and the yields of individual Cl-DBPs from 2-amino-4-nitrophenol were higher than those from 4-nitrophenol. Meantime, increasing chlorine contact time, UV fluence, and free chlorine dose could enhance Cl-DBPs formation, while much higher values of the three factors might decrease the yields of Cl-DBPs. Besides, alkaline pH could decrease the yields of halonitromethane (HNMs) and DCAN but increase the yields of TCM. Also, higher concentrations of 4-nitrophenol and 2-amino-4-nitrophenol would induce more Cl-DBPs formation. Subsequently, the possible formation pathways of DCNM, TCNM, DCAN, and TCM form 4-nitrophenol and 2-amino-4-nitrophenol during UV/post-chlorination were proposed according to transformation products (TPs) and density functional theory (DFT) calculation. Notably, Cl-DBPs formed from 2-amino-4-nitrophenol presented higher toxicity than those from 4-nitrophenol. Among these generated Cl-DBPs, DCAN and TCNM posed higher cytotoxicity and genotoxicity, respectively. Furthermore, 4-nitrophenol, 2-amino-4-nitrophenol, and their TPs exhibited ecotoxicity. Finally, 4-nitrophenol and 2-amino-4-nitrophenol presented a high potential to produce DCNM, TCNM, DCAN, and TCM in actual waters during UV/post-chlorination, but the Cl-DBPs yields were markedly different from those in simulated waters. This work can help better understand Cl-DBPs formation from different NCs during UV/post-chlorination and is conducive to controlling Cl-DBPs formation.

The role of reactive chlorine and nitrogen species in micropollutant degradation in UV/monochloramine

Monochloramine (NH2Cl) is applied upstream of reverse osmosis (RO) membranes for biofouling control. Residual NH2Cl can undergo UV photolysis downstream, generating reactive species for an AOP to occur. At the bench-scale, NH2Cl is typically generated from combining sodium hypochlorite and ammonium chloride or sulfate. This study investigated the degradation of four compounds of interest - acetaminophen, caffeine, sucralose and 1,4-dioxane - in UV/NH2Cl at the bench scale to study their reactivity with reactive chlorine species (RCS) and reactive nitrogen species (RNS). With methanol acting as a scavenger of •OH radicals, the performance of UV/NH2Cl was compared to UV/H2O2 and UV/HOCl. In UV/H2O2, dioxane was severely inhibited at 1-2 mg/L H2O2 and comparable at 5 mg/L to UV/NH2Cl. When ammonium sulfate ((NH4)2SO4) was used as the ammonia source over ammonium chloride (NH4Cl), the overall degradation of micropollutants was higher and caffeine was exclusively degraded. At 1-2 mg/L NH2Cl, dioxane degraded by 16.2-17.8% and 2.92-5.29% from (NH4)2SO4 and NH4Cl respectively while caffeine degraded by 7.45-9.61% with NH2Cl ((NH4)2SO4), but not degrade with NH2Cl (NH4Cl). The higher concentration of chloride ions from NH4Cl significantly influenced the speciation of generated radicals and impacted micropollutant degradation. This suggests that the reactivity of more selective RCS (Cl2•-, •ClO, ClOH•-) and RNS (•NH2, •NO, •NO2, etc.) varies with micropollutants of interest. The presence of higher chloride concentration from the ammonia source inhibited the generation of •OH radicals with •OH consumed by RNS to form NO3- (μg/L levels), showing the impact of the choice of ammonia source and the water matrix on UV/NH2Cl performance.

Comprehensive Assessment of Reactive Bromine Species in Advanced Oxidation Processes: Differential Roles in Micropollutant Abatement in Bromide-Containing Water

Reactive bromine species (RBS) are gaining increasing attention in natural and engineered aqueous systems containing bromide ions (Br-). However, their roles in the degradation of structurally diverse micropollutants by advanced oxidation processes (AOPs) were not differentiated. In this study, the second-order rate constants (k) of Br•, Br2•-, BrO•, and ClBr•- were collected and evaluated. Br• is the most reactive RBS toward 21 examined micropollutants with k values of 108-1010 M-1 s-1. Br2•-, ClBr•-, and BrO• are selective for electron-rich micropollutants with k values of 106-108 M-1 s-1. The specific roles of RBS in aqueous micropollutant degradation in AOPs were revealed by using simplified models via sensitivity analysis. Generally, RBS play minimal roles in the UV/H2O2 process but are significant in the UV/peroxydisulfate (PDS) and UV/chlorine processes in the presence of trace Br-. In UV/PDS with ≥1 μM Br-, Br• emerges as the major RBS for removing electron-rich micropollutants. In UV/chlorine, BrO• contributes to the degradation of specific electron-rich micropollutants with removal percentages of ≥20% at 1 μM Br-, while the contributions of BrO• and Br• are comparable to those of reactive chlorine species as Br- concentration increases to several μM. In all AOPs, Br2•- and ClBr•- play minor roles at 1-10 μM Br-. Water matrix components such as HCO3-, Cl-, and natural organic matter (NOM) significantly inhibit Br•, while BrO• is less affected, only slightly scavenged by NOM with a k value of 2.1 (mgC/L)-1 s-1. This study sheds light on the differential roles of multiple RBS in micropollutant abatement by AOPs in Br--containing water.

Mechanochemical Degradation of Caffeine and Diclofenac Using Biochar of Fique Bagasse in the Presence of Al: Monitoring by Mass Spectrometry

Much research has been carried out to remove emerging contaminants using diverse materials. Furthermore, studies related to pollutant degradation have increased over the past decade. Mechanochemical degradation can successfully decompose molecules that are persistent in the environment. In this study, the biochar of fique bagasse with mixtures SiO2, Al, Al2O3, and Al-Al2O3 was treated with a mechanochemical technique using a planetary ball mill to investigate the degradation of caffeine and diclofenac. These tests resulted in the transformation of caffeine and diclofenac due to the use of Al employing mechanochemistry. In fact, through the use of liquid chromatography coupled with mass spectrometry, eight and six subproducts were identified for caffeine and diclofenac, respectively. Additionally, analysis of the molecules proposed for caffeine and diclofenac transformation suggested hydroxylation, demethylation, decarboxylation, oxidation reactions, and cleavage of the C-C and C-N bonds in the pollutants studied. The formation of these transformation products could be possible by reductant oxygen species generated from the molecular oxygen in the presence of aluminum and the energy delivered for ball milling. The results obtained show the potential application in the environmental management of mechanochemical treatment in the elimination of emerging contaminants caffeine and diclofenac.

Fiberglass cloth coated by coffee ground waste-derived carbon quantum dots/titanium dioxide composite for removal of caffeine and other pharmaceuticals from water

Coffee ground waste from the coffee beverage preparation is mainly discarded and consequently ends up in landfill, which cause the contamination of caffeine in various environmental compartments. This study focuses on the upcycling of coffee-ground waste to carbon quantum dots (CQDs) for use as a modifying material to improve the visible light activity of titanium dioxide (TiO₂). The CQD solution was synthesized by hydrothermal method, which has an average size of 2.80 ± 0.63 nm. The CQDs/TiO₂ photocatalysts were prepared by combining CQD solutions at various amounts with sol-gel TiO₂ and then coated on the fiberglass cloths (FGCs). The photocatalytic application mainly focuses on the removal of caffeine from the water. The photocatalytic experiment was preliminary run in a simple batch reactor under visible light. The 5CQDs/TiO₂ coated FGC (5 mL of CQD solution/g of Ti-based on sol-gel) showed the best performance, and it was selected for the removal of caffeine and other pharmaceuticals (i.e., carbamazepine and ibuprofen) in the recirculating reactor. The removals of caffeine, carbamazepine, and ibuprofen after irradiation for 9 h were 82%, 88%, and 84%, respectively. The residual concentrations were significantly lower than the reported toxicity levels based on specific species. The changes in total organic carbon were observed, indicating the mineralization of pharmaceuticals in water. The 5CQDs/TiO₂ coated FGC showed good flexible performance. No obvious loss of activity was observed for five runs. The actual wastewater from the coffee pot cleaning process was also tested. The removal was 80% for caffeine and 86% for color in the unit of the American Dye Manufacturers Institute (ADMI).

Rate constants for the reactions of chloride monoxide radical (ClO•) and organic molecules of environmental interest

ClO^• plays a key role in the UV/chlorine process besides Cl^•, Cl2^• - , and ^•OH. In many experiments, ClO^• proved to be the main reactant that destroyed the organic pollutants in advanced oxidation process. About 200 rate constants of ClO^• reactions were collected from the literature, grouped together according to the chemical structure, and the molecular structure dependencies were evaluated. In most experiments, ClO^• was produced by the photolytic reaction of HClO/ClO-. For a few compounds, the rate constants were determined by the absolute method, pulse radiolysis. Most values were obtained in steady-state experiments by competitive technique or by complex kinetic calculations after measuring the pollutant degradation in the UV/chlorine process. About 30% of the listed rate constant values were derived in quantum chemical or in structure-reactivity (QSAR) calculations. The values show at least six orders of magnitude variations with the molecular structure. Molecules having electron-rich parts, e.g., phenol/phenolate, amine, or sulfite group have high rate constants in the range of 10⁸-10⁹ mol^-1 dm³ s^-1. ClO^• is inactive in reactions with saturated molecules, alcohols, or simple aromatic molecules.

Evaluating UV254 absorbance reductions in landfill leachate for municipal sewage co-treatment through timed UV/electrooxidation

Landfill leachate contains dissolved organic matter (DOM) exhibiting high ultraviolet absorbance at 254 nm (UVA₂₅₄). The UVA₂₅₄ limits leachate co-treatment with municipal sewage by hindering the downstream UV disinfection efficiency at wastewater treatment plants. Here, we alleviated the UVA₂₅₄ by timing the radiation in a UV/electrooxidation (UV/EO) process to accelerate reactive species formation. At 200 A·m^-2, the UV radiation was delayed by 10 min to accumulate 21 mg·L^-1 as Cl₂, which enhanced the initial radical formation rate by 5.25 times compared with a simultaneous UV/EO. The timed operation increased the steady-state concentrations of ClO^• by 700 times to 4.11 × 10^-14 M and reduced the leachate UVA₂₅₄ by 78.2% after 60 min. We identified that aromatic formulas with low oxygen content were susceptible to UV/EO from Fourier-transform ion cyclotron resonance mass spectrometry analysis. The toxicity of the treated leachate and generated byproducts was assessed through specific oxygen uptake rates (SOUR) and developmental assays with Platynereis dumerilii. After quenching the residual chlorine, leachate co-treatment at 3.5% v/v presented minimal toxicological risk. Our findings provide operational insights for applying UV/EO in high UVA₂₅₄ matrices such as landfill leachate.

Different reaction mechanisms of SO4•- and •OH with organic compound interpreted at molecular orbital level in Co(II)/peroxymonosulfate catalytic activation system

Hydroxyl radical (•OH) and sulfate radical (SO₄•^-) produced in advanced oxidation processes (AOPs) have been widely studied for organic contaminants degradation, however, the different radical characteristics and reaction mechanisms on organics degradation are still needed. In this study, a homogeneous Co(II)/peroxymonosulfate activation system was established for caffeine (CAF) degradation, and pH was controlled to regulate the radicals production. The different attack routes driven by SO₄•^- and •OH were deeply explored by transformation products (TPs) identification and theoretical calculations. Specifically, a method on dynamic electronic structure analysis of reactants (R), transition state (TS) and intermediates (IMs) during reaction was proposed, which was applied to elucidate the underlying mechanism of CAF oxidation by •OH and SO₄•^- at the molecular orbital level. In total, SO₄•^- is kinetically more likely to attack CAF than •OH due to its higher oxidation potential and electrophilicity index. Single electron transfer reaction (SET) is only favorable for SO₄•^-due to its higher electron affinity than •OH, while only •OH can react with CAF via hydrogen atom abstraction (HAA) route. Radical adduct formation (RAF) is the most favorable route for both •OH and SO₄•^- attack according to both kinetics and thermodynamics results. These findings can significantly promote the understanding on the degradation mechanism of organic pollutants driven by •OH and SO₄•^- in AOPs.

Mechanistic insights into UV photolysis of carbamazepine and caffeine: Active species, reaction sites, and toxicity evolution

The pseudo-persistence of pharmaceutical and personal care products (PPCPs)in the aqueous environment may pose potential risks to human health and ecosystems. The UV disinfection in wastewater treatment plants is one of the essential processes before PPCPs enter the water environment, so it is crucial to elucidate the photolytic behavior and mechanism of PPCPs under UV radiation. In this work, carbamazepine (CBZ) and caffeine (CAF) were selected as typical pollutants to investigate the effect of water matrixes, humic acid, inorganic ions, and pH on the UV radiation performance. Hydroxyl radical (•OH) and singlet oxygen (¹O₂) were identified by quenching experiments and electron paramagnetic resonance (EPR) spectra as playing a dominant role in the degradation process. UPLC-TOF/MS was conducted to identify 13 and 14 possible intermediates of CBZ and CAF, respectively. Moreover, combining density functional theory (DFT) calculations (Frontier Molecular Orbital and Fukui index), hydroxylation, oxidation, and ring cleavage were proposed as the main degradation pathways of the contaminants, which occurred first at the C(7C), N(17 N) and O(18O) sites of CBZ and at the C(9C) site of CAF. The bio-acute toxicity experiment and the Ecological Structure-Activity Relationships (ECOSAR) program were performed to analyze and predict the toxicity of the intermediates of CBZ and CAF under UV radiation, respectively. The results showed that the acute toxicity of both solutions increased after UV radiation and followed with the combined toxicity. This work has great scientific value and practical environmental significance for evaluating the UV disinfection process and managing PPCPs in the aqueous environment.

Enhanced decomposition of caffeine by water plasma combined with mist generator: Effect of operational parameter and decomposition pathway

Water plasma coupled with mist generator was introduced to perform the decomposition of caffeine (CAF) wastewater. The mist-shaped water molecule was directly used for plasma-forming gas with no additional gas. The influence of arc current on the decomposition of CAF was elucidated in detail. With the increase of input power from 0.8 to 1.1 kW according to arc current, the removal efficiency of total organic carbon (TOC) and CAF increased, reaching 91.1 and 99.8% at 9.5 A, respectively. H₂, CO, CO₂, and N₂ were major effluent gaseous species, of which the H₂ generation was more than 40% for all conditions. The concentration of nitrate in the effluent liquids was the highest at 9.5 A due to a higher oxidation environment. The H, O, and OH as reactive species formed via the dissociation of water molecules were demonstrated, and the plasma temperatures were at over 5000 K. The detailed decomposition pathway was deduced based on eleven intermediate products identified in this process. Electron impact and hydroxyl radical were found to take leading roles in the decomposition of CAF.

Enhanced photocatalytic degradation of caffeine using Co-Zn/Al2O3 nanocomposite

This work focuses on the synthesis and characterization of photocatalytic activity of Co-Zn/Al₂O₃ nanocomposite obtained by calcination of Co-loaded Zn/aluminum layered double hydroxide by wet impregnation method. The catalyst was characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), BET and UV-DRS. The evaluation of catalytic activity was investigated for the degradation of emerging pharmaceutical pollutant caffeine in aqueous solutions under UV irradiation. The process parameters were optimized for the maximum removal of caffeine. A maximum caffeine removal of 92% was obtained with the optimal conditions at the catalytic dosage of 0.5 g/L, contact time of 50 min, initial concentration of 50 mg/L, and pH of 9.5. The batch experimental data coincide well with the pseudo first order kinetic model, the rate constant of 0.012 min^-1, with the R² value of 0.875-0.938. The regeneration study reveals that the catalyst has high stability and maximum removal efficiency. Hence, the synthesized nanocatalyst is considered a potential photo catalyst for removing the pharmaceutical pollutant caffeine from aqueous solutions.

Effects of MPUV/chlorine oxidation and coexisting bromide, ammonia, and nitrate on DBP formation potential of five typical amino acids

Disinfection byproduct (DBP) formation is a potential concern with regard to MPUV/Cl₂ application in water treatment. In this study, five typical amino acids (AAs) were selected to investigate their DBP alteration during short-term medium pressure (MP) UV/chlorine oxidation following post-chlorination relative to parallel dark controls. The five selected AAs include two potent DBP precursors (aspartic acid and tryptophan), one modest precursor (asparagine) and two poor precursors (phenylalanine and proline). MPUV/chlorine increased the total DBP formation and DBP-associated cytotoxicity of the two poor precursors phenylalanine (Phe) and proline (Pro) as well as their chlorine demands. Conversely, DBP formation and DBP-associated cytotoxicity of the three modest-to-potent DBP precursors showed the opposite changing trends due to MPUV/Cl₂ oxidation. The two aromatic AAs (tryptophan and phenylalanine) were more readily to be affected by MPUV/Cl₂ oxidation especially at acidic pH condition. Conversely, DBP formation and DBP-associated cytotoxicity of the three modest-to-potent precursors showed the opposite changing trends due to MPUV/Cl₂ oxidation. Among the measured DBPs, the absolute formation potential changes of haloacetic acids and haloacetonitriles were the most prominent. Presence of bromide increased the trihalomethane formation potential of five AAs. Ammonia-spiked samples resulted in notably higher chlorine demands but slightly reduced DBPFP. Photonitration caused increased haloacetonitrile and trichloronitromethane formation but lower overall DBP formation potential and DBP-associated cytotoxicity. Results indicated that increased DBP formation of unreactive aromatic AAs may be problematic with respect to MPUV/Cl₂ application, while the presence of inorganic ions may not contribute to further increase in calculated cytotoxicity of measured DBPs.

Mechanistic Insight into Degradation of Cetirizine under UV/Chlorine Treatment: Experimental and Quantum Chemical Studies

UV/chlorine treatment is an efficient technology for removing organic pollutants in wastewater. Nevertheless, degradation of antihistamines in the UV/chlorine system, especially the underlying reaction mechanism, is not yet clear. In this study, the degradation of cetirizine (CTZ), a representative antihistamine, under UV/chlorine treatment was investigated. The results showed that CTZ could undergo fast degradation in the UV/chlorine system with an observed reaction rate constant (kobs) of (0.19 ± 0.01) min−1, which showed a first-increase and then-decrease trend with its initial concentration increased. The degradation of CTZ during the UV/chlorine treatment was attributed to direct UV irradiation (38.7%), HO• (35.3%), Cl• (7.3%), and ClO• (17.1%). The kobs of CTZ decreased with the increase in pH and the increase in concentrations of a representative dissolved organic matter, Suwannee River natural organic matter (SRNOM), due to their negative effects on the concentrations of reactive species generated in the UV/chlorine system. The detailed reaction pathways of HO•, ClO•, and Cl• with CTZ were revealed using quantum chemical calculation. This study provided significant insights into the efficient degradation and the underlying mechanism for the removal of CTZ in the UV/chlorine system.

Simulation degradation of bromophenolic compounds in chlorine-based advanced oxidation processes: Mechanism, microscopic and apparent kinetics, and toxicity assessment

Chlorine-based advanced oxidation processes (AOPs) have been extensively studied to remove contaminants through generating HO^• and reactive chlorine species, including ClO^• and Cl^•. In this work, 2,4,6-tribromoanisole (246TBA) and 2,4,6-tribromophenol (246TBP) were selected as model to investigate the reaction mechanisms and micro-kinetics of brominated contaminants with HO^•, ClO^• and Cl^• in chlorine-based AOPs. Also, the apparent degradation kinetics of two compounds were simulated at pH 3.0-9.5 under UV/H₂O₂, UV/chlorine and UV/NH₂Cl. Calculated results showed that neutral 246TBA and 246TBP exhibited similar reactivity to HO^• and ClO^•, which was different from anionic 2,4,6-tribromophenolate (246TBPT): radical adduct formation (RAF) and H atom abstraction (HAA) were predominant mechanisms for the HO^• and ClO^• initiated reactions of 246TBA and 246TBP, while RAF and single electron transfer (SET) for 246TBPT; the reaction rate constants of 246TBA and 246TBP with HO^• and ClO^• were lower than 10⁷ M^-1 s^-1, and such rate constants dramatically increased to 10¹⁰ M^-1 s^-1 once 246TBP was deprotonated to 246TBPT. The apparent degradation kinetics of 246TBA at pH 3.0-9.5 was simulated in the order of UV/NH₂Cl > UV/chlorine > UV/H₂O₂, and UV/chlorine and UV/NH₂Cl were more effective for the removal of 246TBP and 246TBPT than UV/H₂O₂. UV and/or Cl^• dominated 246 TBA degradation under three AOPs. The main radicals mediating 246TBP and 246TBPT degradation are respectively HO^• under UV/H₂O₂, ClO^• under UV/chlorine, and HO^• and Cl^• under UV/NH₂Cl. The transformation products of 246TBA, 246TBP and 246TBPT, especially methoxylated and hydroxylated polybrominated diphenyl ethers (MeO-PBDEs and HO-PBDEs), were still toxic pollutants.

Degradation evaluation of acrylamide in advanced oxidation processes based on theoretical method: Mechanisms, kinetics, toxicity evaluation and the role of soil particles

Acrylamide (AA) is now recognized as an imminent hazardous chemical in the aqueous environment, causing a potential threat to human health. As a neo-formed contaminant (NFC), the degradation measure of AA is largely lacking. In this work, we used quantum chemistry and experimental methods to identify the main degradation mechanism of AA in the UV/H₂O₂ advanced oxidation process (AOP) for the first time. Radical addition reactions dominate the •OH-initiated AA reaction, resulting in few toxic nitrosamines formation. The interaction between AA and the surface model of soil particles (Si_xO_y(OH)_z) is weak, and AA can rapidly migrate down to groundwater via seepage. However, the total rate constants of AA and COM_ADS2-AA with •OH are 2.75 × 10⁹ and 2.09 × 10⁹ M^-1 s^-1, and the removal of AA from aqueous and heterogeneous systems reaches 62.30% and 62.05% within 2 h. Whether in the aqueous-phase or on the surface of soil particles, •OH initiated AA reaction is an efficient way to remove AA. Furthermore, the toxicity of the main by-products of AA show less harmful to three aquatic organisms and rats than AA. UV/H₂O₂ AOP is evaluated as an efficient method to degrade AA while decreasing harm.

Caffeine photocatalytic degradation using composites of NiO/TiO2-F and CuO/TiO2-F under UV irradiation

The interest in the removal of emerging contaminants has increased in the last decade. Photocatalytic degradation using p-n heterojunctions could effectively provide the degradation of these type of substances that are persistent in the environment. In this work, the synthesis, characterization, and photocatalytic evaluation of TiO₂-F as well as CuO/TiO₂-F and NiO/TiO₂-F composite materials were studied in the photo-assisted degradation of caffeine using UV radiation. The fluorination of titanium dioxide induced changes in some physicochemical properties of the materials, which contributed to a decrease in surface area and bandgap energy as well as an increase in crystallite size as compared to pristine TiO₂. ≡Ti-F species were evidenced to be formed, which could favor charge separation processes. A highest segregation of CuO species in comparison with NiO on the surface of TiO₂-F could be formed, which could increase defect sites and decrease the band gap. The formation of a heterojunction between the semiconductors was evidenced, responsible for the observed improvements in photocatalytic properties of the composite materials. The photocatalytic tests evidenced an important degradation of caffeine; however, mineralization was incomplete. The stability of the composite materials and their potential use in the photocatalytic treatment of caffeine was evaluated by reuse tests.

Misconceptions about the Chemistry of Aqueous Chlorine Atoms and HClOH•(aq), and a Revised Mechanism for the Photochemical Peroxydisulfate/Chloride Reaction

It is widely considered that aqueous chlorine atoms (Cl•) convert to the species HClOH• with a half life of about 3 µs and that this species plays an important role...

Micropollutant abatement and byproduct formation during the co-exposure of chlorine dioxide (ClO2) and UVC radiation

Photolysis of ClO₂ by UVC radiation occurs in several drinking water treatment scenarios (e.g., pre-oxidation by ClO₂ with post-UVC disinfection or a multi-barrier disinfection system comprising ClO₂ and UVC disinfection in sequence). However, whether micropollutants are degraded and undesired byproducts are formed during the co-exposure of ClO₂ and UVC radiation remain unclear. This study demonstrated that four micropollutants (trimethoprim, iopromide, caffeine, and ciprofloxacin) were degraded by 14.4-100.0% during the co-exposure of ClO₂ and UVC radiation in the synthetic drinking water under the environmentally relevant conditions (UV dose of 207 mJ cm^-2, ClO₂ dose of 1.35 mg L^-1, and pH of 7.0). Trimethoprim and iopromide were predominantly degraded by ClO₂ oxidation and direct UVC photolysis, respectively. Caffeine and ciprofloxacin were predominantly degraded by the radicals (HO^• and Cl^•) and the in-situ formed free chlorine from ClO₂ photolysis, respectively. The yields of total organic chlorine (12.5 µg L^-1 from 1.0 mg C L^-1 of NOM) and chlorate (0.14 mg L^-1 From 1.35 mg L^-1 of ClO₂) during the co-exposure were low. However, the yield of chlorite was high (0.76 mg L^-1 from 1.35 mg L^-1 of ClO₂), which requires attention and control.