Identifying environmental hotspots and improvement strategies of vanillin production with life cycle assessment

Engineering carboxylic acid reductases and unspecific peroxygenases for flavor and fragrance biosynthesis

Emerging consumer demand for safer, more sustainable flavors and fragrances has created new challenges for the industry. Enzymatic syntheses represent a promising green production route, but the broad application requires engineering advancements for expanded diversity, improved selectivity, and enhanced stability to be cost-competitive with current methods. This review discusses recent advances and future outlooks for enzyme engineering in this field. We focus on carboxylic acid reductases (CARs) and unspecific peroxygenases (UPOs) that enable selective productions of complex flavor and fragrance molecules. Both enzyme types consist of natural variants with attractive characteristics for biocatalytic applications. Applying protein engineering methods, including rational design and directed evolution in concert with computational modeling, present excellent examples for property improvements to unleash the full potential of enzymes in the biosynthesis of value-added chemicals.

Bio-Based Valorization of Lignin-Derived Phenolic Compounds: A Review

Lignins are the most abundant biopolymers that consist of aromatic units. Lignins are obtained by fractionation of lignocellulose in the form of "technical lignins". The depolymerization (conversion) of lignin and the treatment of depolymerized lignin are challenging processes due to the complexity and resistance of lignins. Progress toward mild work-up of lignins has been discussed in numerous reviews. The next step in the valorization of lignin is the conversion of lignin-based monomers, which are limited in number, into a wider range of bulk and fine chemicals. These reactions may need chemicals, catalysts, solvents, or energy from fossil resources. This is counterintuitive to green, sustainable chemistry. Therefore, in this review, we focus on biocatalyzed reactions of lignin monomers, e.g., vanillin, vanillic acid, syringaldehyde, guaiacols, (iso)eugenol, ferulic acid, p-coumaric acid, and alkylphenols. For each monomer, its production from lignin or lignocellulose is summarized, and, mainly, its biotransformations that provide useful chemicals are discussed. The technological maturity of these processes is characterized based on, e.g., scale, volumetric productivities, or isolated yields. The biocatalyzed reactions are compared with their chemically catalyzed counterparts if the latter are available.

Single-cell sorting of microalgae and identification of optimal conditions by using response surface methodology coupled with life-cycle approaches

Response surface methodology (RSM) has been widely used to identify optimal conditions for environmental microorganisms to maximize degrading pollutants and accumulating biomass. However, to date, environmental impact and economic cost have rarely been considered. In this study, a single cell of microalgae Chlorella sorokiniana ZM-5 was sorted, and its enrichment was carried out for the first time. The optimized conditions by RSM for achieving the highest COD, TN, TP removal and 352.61 mg/g lipid production were 24 h light time, 4.3:1C/N, 7.2 pH, and 30 °C temperature, respectively. Life-cycle approaches were then carried out upon this illustrative case, and the results indicated that the implementation of the above optimal conditions could reduce the total environmental impact by 48.0% and the total economic impact by 10.2%. This study showed the feasibility of applying life-cycle approaches to examine the optimal conditions of a biological process in terms of minimizing environmental impact and economic costs.

ESCAPE approach for the sustainability evaluation of spent lithium-ion batteries recovery: Dataset of 33 available technologies

Recovering critical raw materials from end-of-life batteries is mandatory to limit the need of virgin resources in the long-term. However, most of the recycling of lithium-ion batteries (LIBs) technologies are still in an infancy stage. As a result, to date, only few studies focus on Life Cycle Assessment (LCA) of the proposed processes, presenting limited results.

This paper reports the methodology and data resulting from sustainability evaluation of 33 different technologies for spent LIBs recovery, on the basis of the availability of information, identified in literature. The ESCAPE (standing for Evaluation of Sustainability of material substitution using CArbon footPrint by a simplified approach) method is based on the use of only two parameters: the embodied energy and the carbon footprint. These parameters are calculated for all the process steps of each technology. Using the ESCAPE approach, the data about energies and emissions associated with the electricity consumption for thermal and mechanical treatments and chemicals and water use are calculated for all the 33 selected technologies, referring to a recent work (Fahimi et a., 2022), which only presents the results.

In addition, ESCAPE tool is used to evaluate and discuss the parameters that can affect the technologies sustainability, to better highlight the most onerous and impactful steps of each technology. Then, this paper also shows that ESCAPE approach allows to propose some strategies to improve the recovery processes, with the aim to support eco-design.

Efficient vanillin biosynthesis by recombinant lignin-degrading bacterium Arthrobacter sp. C2 and its environmental profile via life cycle assessment

Vanillin is a natural flavoring agent that is widely used in the bioengineering industry. To enable sustainable development, joint consideration of bacterial performance and negative environmental impacts are critical to vanillin biosynthesis. In this study, a cold shock protein (csp) gene was upregulated for maintaining stable growth in Arthrobacter sp. C2 responding to vanillin and cold stress. Furthermore, the recombinant strain C2 was constructed by simultaneously deleting the xylC gene encoding benzaldehyde dehydrase and overexpressing the pchF gene encoding vanillyl alcohol oxidase and achieved a maximum vanillin productivity of 0.85 mg/g DCW/h with alkaline lignin as the substrate. Finally, this process generated an environmental impact value of 25.05, which was the lowest environmental impact achieved according to life cycle assessment (LCA). Improvement strategies included reducing electricity consumption and replacing chemicals. This study achieved the development of an effective strategy, and future studies should focus on precise vanillin biosynthesis methods for large-scale application.

Impact of microbial inoculants combined with humic acid on the fate of estrogens during pig manure composting under low-temperature conditions

To investigate the efficiency of psychrotrophic cellulose-degrading fungal strains (PCDFSs) and estrogen-degrading bacteria (EDBs) combined with humic acid (HA) on estrone (E1) and 17-β-estradiol (E2) degradation, five compost groups (T, HA, EDB, PCDFS, and CK) were prepared and composted for 32 days at 11-14°C. The results indicated that inoculation increased the temperature to 62.2°C and promoted E1 degradation to the lowest level of 100.1 ng/kg, while E2 was undetected from day 16. Metagenomic analysis revealed that inoculation altered the microbial community structure by increasing the abundance of cellulose-degrading fungi, especially Meyerozyma (16.7%) (among PCDFSs), and of estrogen-degrading bacteria, particularly Microbacterium (13.4%) (involved in EDBs). Moreover, inoculation increased the levels (>0.500%) of Gene Ontology (GO) associated with estrogen degradation, like 3-β-hydroxy-delta 5-steroid dehydrogenase and monooxygenase. Redundancy analysis demonstrated that temperature and Microbacterium were positively correlated with estrogen degradation. Structural equation model indicated that temperature and estrogen-degrading bacterial genera exhibited positive, significant (p < 0.001) and direct impacts on estrogen degradation. This is the first study to suggest that applying microbial inoculants and HA could accelerate estrogen degradation during composting in cold regions. The research outcomes offer a practical reference for managing compost safety, thereby decreasing its potential environmental and human health impacts.

Pulsed Electric Field-Assisted Extraction of Aroma and Bioactive Compounds From Aromatic Plants and Food By-Products

In this work, the effect of pulsed electric field (PEF) pre-treatment on the extractability in green solvents (i. e., ethanol–water mixture and propylene glycol) of target aroma and bioactive compounds, such as vanillin from vanilla pods, theobromine and caffeine from cocoa bean shells, linalool from vermouth mixture, and limonene from orange peels, was investigated. The effectiveness of PEF as a cell disintegration technique in a wide range of field strength (1–5 kV/cm) and energy input (1–40 kJ/kg) was confirmed using impedance measurements, and results were used to define the optimal PEF conditions for the pre-treatment of each plant tissue before the subsequent solid–liquid extraction process. The extracted compounds from untreated and PEF-treated samples were analyzed via GC-MS and HPLC-PDA analysis. Results revealed that the maximum cell disintegration index was detected for cocoa bean shells and vanilla pods (Z_p = 0.82), followed by vermouth mixture (Z_p = 0.77), and orange peels (Z_p = 0.55). As a result, PEF pre-treatment significantly enhanced the extraction yield of the target compounds in both solvents, but especially in ethanolic extracts of vanillin (+14%), theobromine (+25%), caffeine (+34%), linalool (+114%), and limonene (+33%), as compared with untreated samples. Moreover, GC-MS and HPLC-PDA analyses revealed no evidence of degradation of individual compounds due to PEF application. The results obtained in this work suggest that the application of PEF treatment before solid–liquid extraction with green solvents could represent a sustainable approach for the recovery of clean labels and natural compounds from aromatic plants and food by-products.

One-Pot Synthesis of Al-P-O Catalysts and Their Catalytic Properties for O-Methylation of Catechol and Methanol

A series of Al-P-O catalysts (Al-xP-O) were prepared using a P123-assisted one-pot method at different P/Al molar ratios and used for O-methylation of catechol and methanol. The influences of the P/Al molar ratio and P123 addition on catalyst structure and surface acid-base characteristics were investigated in detail. Increasing the P/Al molar ratio more favored crystalline aluminophosphate. The P123-assisted Al³⁺ and PO₄³⁻ are known to be stabilized through weak steric force so that the formation of crystalline aluminophosphate could be inhibited at higher P/Al molar ratios. The results showed that the prepared Al-P-O catalysts possessed appropriate weak acid and weak base sites, which was beneficial to the reaction of catechol and methanol. The Al-1.1P-O catalyst synthesized with the assistance of P123 exhibited superior catalytic performances, with 52.5% catechol conversion and higher guaiacol selectivity of 97.6%.