Natural mineral bentonite as catalyst for efficient isomerization of biomass-derived glucose to fructose in water

Ball billing induced highly dispersed nano-MgO in biochar for glucose isomerization at low temperatures

The isomerization of glucose is a crucial step for biomass valorization to downstream chemicals. Herein, highly dispersed MgO doped biochar (BM-0.5@450) was prepared from rice straw via a solvent-free ball milling pretreatment and pyrolysis under nitrogen conditions. The nano-MgO doped biochar demonstrated enhanced conversion of glucose in water at low temperatures. A 31 % yield of fructose was obtained from glucose over BM-0.5@450 at 50 °C with 80.0 % selectivity. At 60 °C for 140 min, BM-0.5@450 achieved a 32.5 % yield of fructose. Compared to catalyst synthesized from conventional impregnation method (IM@450), the BM-0.5@450 catalyst shows much higher fructose yields (32.5 % vs 25.9 %), which can be attributed to smaller crystallite size of MgO (11.32 nm vs 19.58 nm) and homogenous distribution. The mechanism study shows that the activated MgOH+·OH- group by water facilitated the deprotonation process leading to the formation of key intermediate enediol.

Efficient Glucose Isomerization to Fructose using Photoregenerable MgSnO3 Catalyst with Cooperative Acid-Base Sites

The isomerization of glucose to fructose plays a crucial role in the food industry and the production of biomass-derived chemicals in biorefineries. However, the catalyst used in this reaction suffers from low selectivity and catalyst deactivation due to carbon or by-product deposition. In this study, MgSnO3 catalyst, synthesized via a facile two-step process involving hydrothermal treatment and calcination, was used for glucose isomerization to fructose. The catalyst demonstrated outstanding catalytic performance, achieving a fructose equilibrium yield of 29.8 % with a selectivity exceeding 90 % under mild conditions owing to its acid-base interaction. Notably, spent catalysts can be regenerated by photoirradiation to remove surface carbon, thereby avoiding the changes in properties and subsequent loss of activity associated with conventional calcination regeneration method. This novel approach eliminates the energy consumption and potential structural aggregation associated with traditional calcination regeneration methods. The acid-base active sites of the catalyst, along with their corresponding catalytic reaction mechanism and photoregeneration mechanism were investigated. This study presents a demonstration of the comprehensive utilization of catalytic material properties, i. e., acid-base and photocatalytic functionalities, for the development of a green and sustainable biomass thermochemical conversion system.

Efficient isomerization of glucose into fructose by MgO-doped lignin-derived ordered mesoporous carbon

The conversion of glucose into fructose can transform cellulose into high-value chemicals. This study introduces an innovative synthesis method for creating an MgO-based ordered mesoporous carbon (MgO@OMC) catalyst, aimed at the efficient isomerization of glucose into fructose. Throughout the synthesis process, lignin serves as the exclusive carbon precursor, while Mg2+ functions as both a crosslinking agent and a metallic active center. This enables a one-step synthesis of MgO@OMC via a solvent-induced evaporation self-assembly (EISA) method. The synthesized MgO@OMCs exhibit an impeccable 2D hexagonal ordered mesoporous structure, in addition to a substantial specific surface area (378.2 m2/g) and small MgO nanoparticles (1.52 nm). Furthermore, this catalyst was shown active, selective, and reusable in the isomerization of glucose to fructose. It yields 41 % fructose with a selectivity of up to 89.3 % at a significant glucose loading of 7 wt% in aqueous solution over MgO0.5@OMC-600. This performance closely rivals the current maximum glucose isomerization yield achieved with solid base catalysts. Additionally, the catalyst retains a fructose selectivity above 60 % even after 4 cycles, a feature attributable to its extended ordered mesoporous structure and the spatial confinement effect of the OMCs, bestowing it with high catalytic efficiency.

Understanding the cation exchange affinity in modified-MMT catalysts for the conversion of glucose to lactic acid

This study investigated the exchange affinity of Fe3+, Cu2+, and Zn2+ cations in sulfuric acid-purified montmorillonite (S-MMT) to enhance Lewis acid sites and subsequently improve the catalytic conversion of glucose to lactic acid. XRD analysis suggested the successful cation exchange process, leading to structural expansion of the resultant cation exchanged-MMTs (CE-MMTs). XRF and TGA indicated that Zn2+ had the highest exchange affinity, followed by Cu2+ and then Fe3+. This finding was further supported by the results of TPD-NH3 analysis and pyridine-adsorption test, which demonstrated that Zn-MMT had the highest total acid sites (TAS) and the ratio of Lewis acid-to-Brønsted acid surface site (LA/BA). These results indicated dominant presence of Lewis acid sites in Zn-MMT due to the higher amount of exchanged Zn2+ cations. Consistently, time-dependent catalytic studies conducted at 170 °C showed that a 7 h-reaction generated the highest lactic acid yield, with the catalytic performance increasing in the order of Fe-MMT < Cu-MMT < Zn-MMT. The study also observed the impact of adding alcohols as co-solvents with water at various ratios on the conversion of glucose to lactic acid catalysed by Zn-MMT. The addition of ethanol enhanced lactic acid yield, while methanol and propanol inhibited lactic acid formation. Notably, a water-to-ethanol ratio of 30 : 70 v/v% emerged as the optimal solvent condition, resulting in ca. 35 wt% higher lactic acid yield compared to using water alone. Overall, this study provides valuable insights into the cation exchange affinity of different cations in MMT catalysts and their relevance to the conversion of glucose to lactic acid. Furthermore, the incorporation of alcohol co-solvent presents a promising way of enhancing the catalytic activity of CE-MMTs.

Fabrication of lignin-derived mesoporous carbon/magnesium oxide composites for microwave-assisted isomerization of glucose in water

A series of mesoporous carbon/magnesium oxide composites (LDMC@MgO-x) with different Mg doping ratios were synthesized by using alkali lignin as the carbon source, potassium chloride as the salt template and magnesium nitrate as the catalytic site precursor, respectively. The BET, FTIR, SEM, and TEM analyses indicated that the as-prepared LDMC@MgO-x possessed a unique hierarchical porous structure with high specific surface area, rich functional groups, and uniformly distributed MgO nanoparticles. Among them, LDMC@MgO-20%, as an optimized base catalyst, could realize effective isomerization of glucose with a maximum fructose yield of 34.4 % in water at 130 °C for only 5 min under microwave assistance. In addition, the activation energy of glucose isomerization catalyzed by LDMC@MgO-20% was estimated to be about 43.6 kJ·mol^-1, which was lower than that of most Lewis acid-catalyzed systems.

Hybrid organic-inorganic nanoparticles with associated functionality for catalytic transformation of biomass substrates

We present the one-pot synthesis of functionalized organosilica nanoparticles to generate multi-functional hybrid catalysts. Octadecyl, alkyl-thiol and alkyl-amino moieties were used separately and in different combinations, to generate different hybrid spherical nanoparticles with tunable acidic, basic and amphiphilic properties, covalently incorporating up to three organic functional elements onto the surface of the nanoparticles. Several parameters were optimised such as the concentration of the base employed during the hydrolysis and condensation synthesis process that showed a strong influence on the particle size. The physico-chemical properties of the hybrid materials were fully characterized by XRD, elemental and thermogravimetric analysis, electron microscopy, nitrogen adsorption isotherms and ¹³C and ²⁹Si NMR spectroscopy. Finally, the potential uses of the prepared materials as amphiphilic catalysts, with acidic or basic properties for the conversion of biomass molecules into platform chemicals were evaluated.

Enhanced catalytic activity of layered double hydroxides via in-situ reconstruction for conversion of glucose/food waste to methyl lactate in biorefinery

Conversion of food waste into valuable chemicals under mild conditions has attracted increasing attention. Herein, a series of nano-sized MgAl layered double hydroxides (LDHs) were firstly developed as solid base catalyst for the methyl lactate (MLA) production directly from glucose/food waste. Glucose, which could be easily obtained from cellulose or starch-rich food waste via hydrolysis, was thus selected as the model compound. It is inspiring to find that the metal hydroxide layer in prepared LDHs was highly stable and suitable enlarged interlayer distance was reconstructed owing to in-situ intercalation of formed aromatics during the reaction, which was demonstrated by ²⁷Al magic angle spinning nuclear magnetic resonance and time-of-flight secondary ion mass spectrometry analysis. As a result, in-situ activation of the catalysts along with gradually enhanced catalytic activity was obtained in the recycling runs and the highest MLA yield of 47.6% from glucose was achieved over LDHs (5:1) after 5 runs at 150 °C. Most importantly, the scope was further extended to other typical substrates (e.g. Chinese cabbage and rice) and the results demonstrated the effectiveness of present conversion system for real food waste.

Acceleration of the Dehydrogenation of d-Glucose to 2-Keto-d-gluconate in Aqueous Amino Acid via Hydrated Stacked Clay Nanosheets

The assembly of discrete active species to form periodical nanostructures is essential in realizing low-cost artificial enzymes that mimic natural enzymatic functions in extraordinary bio(chemo)selective reactions. In this study, we developed artificial bifunctional glucose/gluconic acid dehydrogenase from naturally abundant resources: l-aspartic acid (Asp) and montmorillonite (a subgroup of smectite natural clay minerals). β-d-Glucose (Glc) was dehydrogenated to 2-keto-d-gluconate (2-KGA) at 25 and 30 °C in an aqueous acidic solution (pH = 3, 4, and 5). The reaction involved sequential steps that yielded d-gluconic acid (GA) as an intermediate. The second step of the dehydrogenation (GA to 2-KGA) occurred at a higher rate than the first (Glc to GA), which is comparable to the natural process. A negatively charged carboxylate in Asp was required for the dehydrogenation, which donates an electron pair (COO:^-) to the hydroxyl group bonded to the C(1)-position of Glc. The acidic sites in clay served as coenzymatic sites (electron acceptor), promoting the Glc dehydrogenation as the Glc reduced by Asp approached the clay coenzymatic sites. The active coenzymatic structures were developed in 48 h (induction period) through the rearrangement of the adsorbed Asp and Glc molecules on montmorillonite in water (intermediate structure). The spontaneous assembling of the intermediate structures facilitated the one-pot dehydrogenation of Glc to 2-KGA via periodic "hydrated stacked layers" comprising clay nanosheets, Asp, and Glc. The facile synthetic route proposed here is inexpensive and would be beneficial without using both GDH and GADH enzymes bound to a cell membrane.

N-Doped natural albite mineral as green solid catalyst for efficient isomerization of glucose into fructose in water

A green and effiecient N-doped mineral catalyst (i.e., CS/Ab) prepared by biomass waste and natural albite was explotied for glucose-to-fructose isomerization.