Insights into the mechanism of hydrogen peroxide activation with biochar produced from anaerobically digested residues at different pyrolysis temperatures for the degradation of BTEXS

H2O2 activation and contaminants removal in heterogeneous Fenton-like systems

Emerging contaminants can be removed effectively in heterogeneous Fenton-like systems. Currently, catalyst activity and contaminant removal mechanisms have been studied extensively in Fenton-like systems. However, a systematic summary was lacking. This review summarized: 1) The effects of various heterogeneous catalysts on emerging contaminants degradation by activating H₂O₂; 2) The role of active sites in different catalysts during the activation of H₂O₂ and their contribution to the generation of active species; 3) The modulation of degradation pathways of emerging contaminants. This paper will help scholars to advance the controlled construction of active sites in heterogeneous Fenton-like systems. Suitable heterogeneous Fenton catalysts can be selected in practical water treatment processes.

Multiphase migration and transformation of BTEX on groundwater table fluctuation in riparian petrochemical sites

Light non-aqueous phase liquids (LNAPL) are considered to be a composition-based risk, containing multiple chemical ingredients that release dissolved- and vapor-phase plumes. In dissolved form, there is a saturation-based risk as the water source expands, affecting groundwater aquifers on a larger scale in the aquifer. As a typical pollutant found in petrochemical contaminated sites, the migration and transformation of benzene, toluene, ethylbenzene, and o-xylene (BTEX) between gas, aqueous, and NAPL phases are distinctly affected by groundwater table fluctuation (GTF). BTEX multiphase migration and transformation pattern in a petrochemical factory at the riverside was simulated based on the TMVOC model in differentiating pollution distribution and interphase transformation under stable or fluctuating groundwater tables conditions. TMVOC model performed an excellent simulation effect on the migration and transformation of BTEX in GTF circumstances. In comparison with the stable groundwater table condition, the BTEX pollution depth under GTF increased by 0.5 m, the pollution area increased by 25%, and the total mass increased by 0.12 × 10² kg. In both cases, the mass reduction of NAPL-phase pollutants was more significant than the total mass reduction of pollutants, and GTF further promoted the mass conversion of NAPL-phase pollutants to water pollutants. Prominently, as the groundwater table rises, the GTF can correct for evacuation, and the transport flux of gaseous pollutants at the atmospheric boundary decreases with increasing transport distance. Furthermore, descended groundwater table will intensify the transmission flux of gaseous pollutants at the atmospheric boundary with the transmission range expanding, which can be harmful to human health on the surface due to gaseous pollutants entering into the air.

Waste to catalyst: Role of agricultural waste in water and wastewater treatment

Presently, owing to the rapid development of industrialization and urbanization activities, a huge quantity of wastewater is generated that contain toxic chemical and heavy metals, imposing higher environmental jeopardies and affecting the life of living well-being and the economy of the counties, if not treated appropriately. Subsequently, the advancement in sustainable cost-effective wastewater treatment technology has attracted more attention from policymakers, legislators, and scientific communities. Therefore, the current review intends to highlight the recent development and applications of biochars and/or green nanoparticles (NPs) produced from agricultural waste via green routes in removing the refractory pollutants from water and wastewater. This review also highlights the contemporary application and mechanism of biochar-supported advanced oxidation processes (AOPs) for the removal of organic pollutants in water and wastewater. Although, the fabrication and application of agriculture waste-derived biochar and NPs are considered a greener approach, nevertheless, before scaling up production and application, its toxicological and life-cycle challenges must be taken into account. Furthermore, future efforts should be carried out towards process engineering to enhance the performance of green catalysts to improve the economy of the process.

Improvement in the physicochemical characteristics of biochar derived from solid digestate of food waste with different moisture contents

The management of digestate from food waste (DFW) has become a worldwide challenge. Pyrolysis is a promising technology to generate biochar from the DFW. However, unlike other biomass, DFW usually has high salt and moisture content, which affects the properties of biochar generated from pyrolysis. The characteristics of biochar derived from DFW with different MCs (5%, 20%, 40%, and 60%) were investigated in the present study. It was found that more micropore and mesopore structures were generated in the biochar with the increase of MC from 5% to 60%, resulting in the Brunauer-Emmett-Teller surface area of the biochar increased from 89.23 m² g^-1 to 117.75 m² g^-1. The MC could also promote the variation of oxygen-containing functional groups and the generation of amorphous carbon structures, which are beneficial for the adsorption property of the biochar. Pyrolysis could stabilize the metals in the biochar, while MC has little effect on the metal speciations. These results provide fundamental information on the impact of MC on the properties of biochar derived from DFW and are important for the optimization of the pre-drying process.

Application of Biochar as Functional Material for Remediation of Organic Pollutants in Water: An Overview

In recent years, numerous studies have focused on the use of biochar as a biological material for environmental remediation due to its low-cost precursor (waste), low toxicity, and diversity of active sites, along with their facile tailoring techniques. Due to its versatility, biochar has been employed as an adsorbent, catalyst (for activating hydrogen peroxide, ozone, persulfate), and photocatalyst. This review aims to provide a comprehensive overview and compare the application of biochar in water remediation. First, the biochar active sites with their functions are presented. Secondly, an overview and summary of biochar performance in treating organic pollutants in different systems is depicted. Thereafter, an evaluation on performance, removal mechanism, active sites involvement, tolerance to different pH values, stability, and reusability, and an economic analysis of implementing biochar for organic pollutants decontamination in each application is presented. Finally, potential prospects to overcome the drawbacks of each application are provided.