Characterization and comparison of microplastic occurrence in point and non-point pollution sources

Assessing the abundance, sources, and potential ecological risk assessment of microplastics using their particle and mass units in Uiam lake, South Korea

Microplastics (MPs) enter lakes through various pathways, including effluents from wastewater treatment plants (WWTPs), surface runoff, and improperly disposed of plastic waste. In this study, the extent of MPs pollution in Uiam Lake in fall of 2022 and spring of 2023 was assessed by determining both the number (n/m3) and mass concentrations (μg/m3) of MPs. Moreover, the correlation between water quality parameters and MP properties was analyzed, and an ecological risk assessment was conducted. MPs abundance was higher in spring than in fall, probably due to the lifting of coronavirus disease-19 restrictions, melting of ice, higher rainfall, and faster wind speed. Fragment was the dominant shape of the MPs collected, while polyvinyl chloride (PVC) and polyester/polyethylene terephthalate were the frequently detected polymer types of MPs in fall and spring, respectively. There was a moderate positive correlation between the number concentration of MPs and the total nitrogen, total phosphorus (T-P), and total organic carbon levels; in contrast, there was no significant relationship between the mass concentration of MPs and all water quality parameters. However, the abundance (μg/m3) of PVC and polymethyl methacrylate MPs were positively correlated with T-P and electrical conductivity. The pollution load index, polymer hazard index, and potential ecological risk index (PERI) were generally higher when the mass unit of MPs was used due to the presence of large-sized MPs composed of highly hazardous polymers (e.g., polyurethane, PVC, and alkyd). For instance, the PERI value of the WWTP effluent was at the very high level (> 1200) in both seasons, regardless of the abundance unit of MPs. Therefore, WWTP effluents may have increased the ecological toxicity of MPs pollution in Uiam Lake.

Microplastics in packaged water, community stored water, groundwater, and surface water in rivers of Tamil Nadu after the COVID-19 pandemic outbreak

The increased load of plastic in waste streams after the COVID-19 pandemic outbreak has increased the possibility of microplastics (MPs) contamination channelling through the rivers and infiltrating the aquatic ecosystems. MPs in packaged water, community-stored water, groundwater, and surface water of Kaveri River (KR), Thamirabarani River (TR), Adyar River (AR), and Cooum River (CR) in Tamil Nadu were therefore investigated about 2 years after the COVID-19 pandemic outbreak. Using μFTIR and μRaman spectroscopy, polyamide, polypropylene, polyethylene, ethylene vinyl alcohol copolymer resin, and polyvinyl chloride were identified as the primary polymer types. The average number of MPs was 2.15 ± 1.9 MP/L, 1.1 ± 0.99 MP/L, 5.25 ± 1.15 MP/L, and 4 ± 2.65 MP/L in KR, TR, AR, and CR, respectively, and 1.75 ± 1.26 MP/L in groundwater, and 2.33 ± 1.52 MP/L in community stored water. Only LDPE was detected in recycled plastic-made drinking water bottles. More than 50% of MPs were found to be of size less than 1 mm, with fibrous MPs being the prevalent type, and a notable prevalence of blue-coloured microplastics in all the sample types. The Pollution Load Index (PLI) was >1 in all the rivers. Toxicity rating based on the polymer risk index (PORI) categorized AR and TR at medium risk (category II), compared to KR and CR at considerable risk (category III). Overall pollution risk index (PRI) followed a decreasing trend with CR > AR > KR > TR of considerable to low-risk category. Ecological risk assessment indicates a negligible risk to freshwater biota, except for four sites in the middle and lower stretches of Adyar River (AR - 2, AR - 4) and upper and lower stretches of Cooum River (CR - 1, CR - 3), located adjacent to direct sewer outlets, and one location in the lower stretch of Kaveri River (KR - 9), known for fishing and tourist activities.

Are we underestimating stormwater? Stormwater as a significant source of microplastics in surface waters

Stormwater represent a critical pathway for transporting microplastics (MPs) to surface waters. Due to complex dynamics of MPs in stormwater, its dispersion, weathering, risk, and transport are poorly understood. This review bridges those gaps by summarizing the latest findings on sources, abundance, characteristics, and dynamics involved in stormwater MP pollution. Weathering starts before or after MPs enter stormwater and is more pronounced on land due to continuous heat and mechanical stress. Land use patterns, rainfall intensity, MPs size and density, and drainage characteristics influence the transport of MPs in stormwater. Tire and road wear particles (TRWPs), littering, and road dust are major sources of MPs in stormwater. The concentrations of MPs varies from 0.38-197,000 particles/L globally. Further MP concentrations showed regional variations, highlighting the importance of local monitoring efforts needed to understand local pollution sources. We observed unique signatures associated with the shape and color of MPs. Fibers and fragments were widely reported, with transparent and black being the predominant colors. We conclude that the contribution of stormwater to MP pollution in surface waters is significantly greater than wastewater treatment plant effluents and demands immediate attention. Field and lab scale studies are needed to understand its behavior in stormwater and the risk posed to the downstream water bodies.

Inter-event and intra-event dynamics of microplastic emissions in an urban river during rainfall episodes

Urban rivers represent the major conduits for land-sourced microplastics in the global oceans, yet the real-time dynamics of their emissions in rivers during rainfall (and runoff) events are poorly understood. Herein, we report the results of high-frequency sampling of microplastic particles (MPs) and fibers (MPFs) in the surface water of an urban river in Japan over the course of three rainfall events (i.e., light, moderate, and heavy rainfalls). The event mean concentrations (EMCs) of MPs amounted to 35,000 items/m3, 929,000 items/m3, and 331,000 items/m3; and the corresponding total loads were 0.5 kg, 19.8 kg, and 35.0 kg for light, moderate and heavy rainfalls, respectively. The inter-event total loads of MPs correlate well with the total rainfall, while the concentrations were linked with the number of antecedent dry days. The dynamic trends show that <2000 μm MPs displayed first flush effects during light to moderate rainfall events (>50% mass discharged with the initial 20-40% of flow). Small-sized MPs (10-40 μm) mobilized rapidly at lower rainfall intensities, whereas MPs over 2000 μm discharged immediately after the peak rainfall intensity. Moreover, <70 μm MPs depicted a surge following heavy rainfall events due to turbulent flow conditions reverting the deposited MPs into suspension. Overall, the three events increased the loads by 4-110 folds, and EMCs by 10-350 folds compared to the concentrations during dry weather while portraying a significant impact on 300-1000 μm MPs. The dynamics of MPs were correlated with those of suspended solids in river water, and the characteristics were comparable to the same of road dust sampled in Japan. Although the dynamic trends between MPs and MPFs in river water were comparable, MPFs were relatively less impacted by rain, likely due to the intervention of separate sewer systems in the study area.

Distribution of microplastics in rainfall and their control by a permeable pavement in low-impact development facility

Microplastics (MPs) released from plastic products in daily life are present in the air and could be transported to freshwater environments along with rain. Recently, low-impact development (LID) facilities, such as permeable pavements, have been used to treat non-point source pollutants, including rainfall runoff. While runoff is treated by LID facilities, the periodic monitoring of MPs in rainfall and the efficiency of removal of MPs through LID facilities have rarely been investigated. Therefore, this case study focused on monitoring MPs in rainwater runoff and permeate from a permeable pavement in Busan, South Korea, thus evaluating the removal efficiency of MPs by a LID system. The initial rainfall runoff and permeate through the LID system were sampled, and the amounts, types, sizes, and shapes of MPs in the samples were analyzed using micro-Fourier Transform Infrared (FTIR) spectroscopy. The results showed that the distribution of MPs in the initial rainfall was affected by population in tested area. Polyethylene was the most common type of MPs in all the samples. Polyamide was only found in the LID samples because of the pollution caused by water flows and pavement materials. Fragment type MPs was most commonly observed and consisted of relatively small-sized (under 100 μm) particles. LID facilities were able to capture approximately 98% of MPs in the rainfall through a filtration process in the permeable pavement.

Quantification of microplastic by particle size down to 1.1 μm in surface road dust in an urban city, Japan

The impact of microplastics (MPs, plastic particles ≤5 mm) on ecosystems is of great concern. Road surfaces represent a significant source of MPs where plastic fragments are physically and chemically reduced to MPs. However, the literature lacks information on fragmentation tendencies below 11 μm. This study aimed to characterize the occurrence of MPs in road dust in different size fractions down to 1.1 μm. Road dust was collected at five sites near a major road in Kusatsu city, Japan, and partitioned by size into 13 fractions (1.1-850 μm). The coarser fractions accounted for a greater proportion of the dust. The percentage of organic matter, determined by loss on ignition, increased as the fractions became finer. Pyrolysis-gas chromatography-mass spectrometry was used to quantify 12 types of polymers in each fraction. The dust was found to contain nine types of MP, namely, polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC), polystyrene (PS), styrene/butadiene rubber (SBR), acrylonitrile/butadiene/styrene resin (ABS), polycarbonate (PC), polymethylmethacrylate (PMMA), and polyamide 66 (PA66). The total MP concentration in road dust particles by particle size fraction (concentrationf) began to increase from the 125-250 μm fraction and remained elevated in finer fractions down to 1.1 μm, indicating that MPs in the road dust micronized to at least 1.1 μm. However, for individual polymer types, the tendency for concentrationf to increase or decrease with particle size fraction varied: the concentrationf of some polymers, such as PE and PVC, remained elevated in fractions down to 1.1 μm; the concentrationf of SBR, a rubber-MP, showed a stable or decreasing trend in fractions of 7.0-11 μm and finer. Particles of PE, PVC, and some other plastics might become increasingly finer, even down to 1.1 μm. Further research is needed to understand the comminution limits of these polymers under pertinent environmental conditions.

Biomass formation and organic carbon migration potential of microplastics from a PET recycling plant: Implication of biostability

The growth of the polyethylene terephthalate (PET) mechanical recycling industry has resulted in the challenge of generating microplastics (MPs). However, little attention has been given to investigating the release of organic carbon from these MPs and their roles in promoting bacterial growth in aquatic environments. In this study, a comprehensive method is proposed to access the potential of organic carbon migration and biomass formation of MPs generated from a PET recycling plant, and to understand its impact on the biological systems of freshwater habitats. Various MPs sizes from a PET recycling plant were selected to conduct a series of tests, including the organic carbon migration test, biomass formation potential test, and microbial community analysis. The MPs smaller than 100 µm, which are difficult to remove from the wastewater, exhibited greater biomass in the observed samples (1.05 × 10¹¹ bacteria per gram MPs). Moreover, PET MPs altered the microbial diversity, with Burkholderiaceae becoming the most abundant, while Rhodobacteraceae was eliminated after being incubated with MPs. This study partly revealed that organic matter adsorbed on the surface of MPs was a significant nutrient source that increased biomass formation. PET MPs acted not only as carriers for microorganisms but also for organic matter. As a result, it is crucial to develop and refine recycling methods in order to decrease the production of PET MPs and minimize their adverse effects on the environment.

Nonpoint Source Pollution (NPSP) Induces Structural and Functional Variation in the Fungal Community of Sediments in the Jialing River, China

Nonpoint source pollution (NPSP) from human production and life activities causes severe destruction in river basin environments. In this study, three types of sediment samples (A, NPSP tributary samples; B, non-NPSP mainstream samples; C, NPSP mainstream samples) were collected at the estuary of the NPSP tributaries of the Jialing River. High-throughput sequencing of the fungal-specific internal transcribed spacer (ITS) gene region was used to identify fungal taxa. The impact of NPSP on the aquatic environment of the Jialing River was revealed by analysing the community structure, community diversity, and functions of sediment fungi. The results showed that the dominant phylum of sediment fungi was Rozellomycota, followed by Ascomycota and Basidiomycota (relative abundance > 5%). NPSP caused a significant increase in the relative abundances of Exosporium, Phialosimplex, Candida, Inocybe, Tausonia, and Slooffia, and caused a significant decrease in the relative abundances of Cercospora, Cladosporium, Dokmaia, Setophaeosphaeria, Paraphoma, Neosetophoma, Periconia, Plectosphaerella, Claviceps, Botrytis, and Papiliotrema. These fungal communities therefore have a certain indicator role. In addition, NPSP caused significant changes in the physicochemical properties of Jialing River sediments, such as pH and available nitrogen (AN), which significantly increased the species richness of fungi and caused significant changes in the fungal community β-diversity (P < 0.05). pH, total phosphorus (TP), and AN were the main environmental factors affecting fungal communities in sediments of Jialing River. The functions of sediment fungi mainly involved three types of nutrient metabolism (symbiotrophic, pathotrophic, and saprotrophic) and 75 metabolic circulation pathways. NPSP significantly improved the pentose phosphate pathway, pentose phosphate pathway, and fatty acid beta-oxidation V metabolic circulation pathway functions (P < 0.05) and inhibited the chitin degradation to ethanol, super pathway of heme biosynthesis from glycine, and adenine and adenosine salvage III metabolic circulation pathway functions (P < 0.05). Hence, NPSP causes changes in the community structure and functions of sediment fungi in Jialing River and has adversely affected for the stability of the Jialing River Basin ecosystem.

Occurrence and sources of micro-plastics in various water bodies, sediments, and fishes in Ansan, South Korea

In this study, the Pearson correlation coefficients were determined to derive correlations between micro-plastics (MPs) in carp and river crabs. MPs were detected for various water sources, including four rivers and four main waterways, sediments, and fish, using Fourier transform infrared spectrometry (FTIR), microscopic analysis, and image mapping. Carp and river crabs had coefficients of 0.888 and 0.724, respectively, which showed a high positive correlation. In water samples, the MPs detected in rivers were higher than those in the main waterway. However, in sediment samples, the MPs detected in the main waterway were higher than those in the rivers. It is believed that MPs are carried toward shore by ocean tide. The size of most of the sediment MPs was 20-49 µm, representing 64.1% of the entire population. The plastics detected in this study were polyethylene terephthalate (PET), polypropylene (PP), and polyethylene (PE), which originate from synthetic fibers, scrubs, and packing material. MP pollution by non-point pollution sources was investigated, with the abundance of MPs increasing by 2 to 3 times between the dry and wet seasons in water and sediment, respectively. It was determined that the inflow of MPs into rivers could have been due to non-point source pollutants from household items, roads, plants, and soil around the water sources.

Microplastic emission characteristics of stormwater runoff in an urban area: Intra-event variability and influencing factors

Stormwater runoff is considered a major pathway for land-based microplastic transportation to aquatic environments. By applying time-weighted stormwater sampling at stormwater outlets from industrial and residential catchments, we investigated the emission characteristics and loads (number- and mass-based) of microplastics to aquatic environments through urban stormwater runoff during rainfall events. Microplastics were detected in stormwater runoff from industrial and residential areas in the concentration range of 68-568 n/L and 54-639 n/L, respectively. Polypropylene and polyethylene were found as major polymers accounting for around 60 % of total microplastics. The fragment was the dominant shape of microplastics, and the most common size class was 20-100 μm or 100-200 μm. The microplastic load emitted from industrial and residential areas were estimated to be 1.54-46.1 × 10⁸ and 0.63-28.5 × 10⁸ particles, respectively. The discharge characteristics of microplastics inter- and intra-event were affected by the land-use pattern and rainfall characteristics. The concentration of microplastics did not significantly differ between industrial and residential catchments, but the composition of polymer types reflected the land-use pattern. The microplastics in stormwater were more concentrated when the number of antecedent dry days (ADDs) was higher; the concentration of microplastics was generally peaked in the early stage of runoff and varied according to rainfall intensity during a rainfall event. The contamination level and load of microplastics were heavily affected by the total rainfall depth. Most microplastics were transported in the early stage of runoff (19-37 % of total runoff time), but the proportion of larger and heavier particles increased in the later period of runoff. The microplastic emission via stormwater runoff was significantly higher than that through the discharge of wastewater treatment plant effluent in the same area, implying that stormwater runoff is the dominant pathway for transporting microplastics to aquatic environments.

Biomonitoring of Airborne Microplastic Deposition in Semi-Natural and Rural Sites Using the Moss Hypnum cupressiforme

We show that the native moss Hypnum cupressiforme can be used as a biomonitor of atmospheric microplastics (MPs). The moss was collected in seven semi-natural and rural sites in Campania (southern Italy) and was analyzed for the presence of MPs, according to standard protocols. Moss samples from all sites accumulated MPs, with fibers representing the largest fraction of plastic debris. Higher numbers of MPs and longer fibers were recorded in moss samples from sites closer to urbanized areas, likely as the results of a continuous flux from sources. The MP size class distribution showed that small size classes characterized sites having a lower level of MP deposition and a high altitude above sea level.

Real-time variabilities in microplastic abundance and characteristics of urban surface runoff and sewer overflow in wet weather as impacted by land use and storm factors

Urban surface runoff (USR) and drainage system overflows during wet weather (WWF) play a key role in shaping water pollution. Particularly, the impact of large amounts of microplastic pollution on urban water bodies is unclear. We conducted an in-field investigation in six central urban drainage systems along Suzhou Creek in the Shanghai megacity of China and identified the impacts of storm factors and land use on the real-time dynamic changes in microplastic abundance and characteristics in USR and WWF. Microplastic abundances ranged from 228.3 ± 105.4-4969.51 ± 348.8, 309.3 ± 144.3-5195.8 ± 425.5, and 130.0 ± 30.0-8500.0 ± 1241.0 particles/L in the traffic and residential catchment USR, and the WWF, respectively. Under similar storm factor conditions, we observed correlations between environmental factors and microplastic abundance, especially the polymer type, verifying the significant role of land use. The microplastic abundance were 90.2 particles/L higher in the traffic catchment USR than in the residential catchment USR. Notably, we found unique microplastic polymers comprising ethylene vinyl acetate copolymer and thermoplastic elastomers in the residential and traffic catchment USR, respectively. However, land use had a minimum impact on the size and shape of microplastics: small-sized and film microplastics dominated in both USR types. We found statistical evidence of the widespread correlations between microplastic abundance and storm factors (accumulated storm depth and WWF flow) in both USR and WWF. The first flush phenomenon of microplastic dynamics was found in both USR and WWF. Microplastic characteristics also changed dynamically with storm time. With heavy storm factors, polypropylene and small-sized (<1 mm) microplastics in USR events increased and then decreased. This was also true for WWF events in granular and polyethylene terephthalate microplastics. Our results can facilitate the targeted mitigation of emerging pollutants to enhance stormwater management strategies and prevent future contamination.

Microplastics in urban catchments: Review of sources, pathways, and entry into stormwater

Urban areas play a key role in the production of microplastics (MPs) and their entry into water bodies. This article reviews the literature on the sources, transport, and control of MPs in urban environments with the aim of clarifying the mechanisms underlying these processes. Major MP sources include atmospheric deposition, micro-litter, and tire and road wear particles (TRWPs). MPs deposited from the atmosphere are mostly fibers and may be particularly important in catchments without traffic. Littering and attrition of textiles and plastic products is another important MP source. However, the quantities of MPs originating from this source may be hard to estimate. TRWPs are a significant source of MPs in urban areas and are arguably the best quantified source. The mobilization of MPs in urban catchments is poorly understood but it appears that dry unconsolidated sediments and MP deposits are most readily mobilized. Sequestration of MPs occurs in green areas and is poorly understood. Consequently, some authors consider green/pervious parts of urban catchments to be MP sinks. Field studies have shown that appreciable MP removal occurs in stormwater quality control facilities. Street cleaning and snow removal also remove MPs (particularly TRWPs), but the efficacy of these measures is unknown. Among stormwater management facilities, biofiltration/retention units seem to remove MPs more effectively than facilities relying on stormwater settling. However, knowledge of MP removal in stormwater facilities remains incomplete. Finally, although 13 research papers reported MP concentrations in stormwater, the total number of field samples examined in these studies was only 189. Moreover, the results of these studies are not necessarily comparable because they are based on relatively small numbers of samples and differ widely in terms of their objectives, sites, analytical methods, size fractions, examined polymers, and even terminology. This area of research can thus be considered "data-poor" and offers great opportunities for further research in many areas.

Microplastics in urban runoff: Global occurrence and fate

Public concerns on microplastic (MP) pollution and its prevalence in urban runoff have grown exponentially. Huge amounts of MPs are transported from urban environments via surface runoff to different environment compartments, including rivers, lakes, reservoirs, estuaries, and oceans. The global concentrations of MPs in urban runoff range from 0 to 8580 particles/L. Understanding the sources, abundance, composition and characteristics of MPs in urban runoff on a global scale is a critical challenge because of the existence of multiple sources and spatiotemporal heterogeneity. Additionally, dynamic processes in the mobilization, aging, fragmentation, transport, and retention of MPs in urban runoff have been largely overlooked. Furthermore, the MP flux through urban runoff into rivers, lakes and even oceans is largely unknown, which is very important for better understanding the fate and transport of MPs in urban environments. Here, we provide a critical review of the global occurrence, transport, retention process, and sinks of MPs in urban runoff. Relevant policies, regulations and measures are put forward. Future global investigations and mitigation efforts will require us to address this issue cautiously, cooperating globally, nationally and regionally, and acting locally.

Refining the diagnostics of non-point source metals pollution to urban lakes based on interaction normalized PMF coupled with Bayesian network

Spatiotemporal variability complicates source apportionment of metals in urban lakes, especially when rainfall drives urban non-point source pollution. As, Cd, Cr, Pb, Hg, Ag, Co, Cu, Fe, Mn, Ni, Sb, Sr and Zn concentrations in 648 water samples collected before and after rain in 6 urban lakes of Beijing, China were determined during 2013-2015. The response of metals concentrations after rain to the interaction between rainfall and antecedent dry days was significant. Metals concentrations were normalized pursuant to the interaction effect as the input of positive matrix factorization (PMF) to develop the interaction normalized-PMF (IN-PMF). Four primary pollution sources were diagnosed. Sediment release was considered to be the main source of Fe, Co and Ni independent of rainfall. Hg, As and some Cr associated with pesticides and fertilizers were likely to come from soil erosion and runoff from green space. It is probable that road runoff was the dominant source for heavy metals related to traffic emissions, including Pb, Cd, Cu, Sb, Mn and Zn. Cr, Sr and some Cu and Zn as key elements of rooftops can be regarded as from roof runoff. The IN-PMF lowered roof and road runoff contributions and raised the contribution of soil erosion from green space, with Pb, Sb, Cu, Zn, Cd and Mn increasing by 15.9%, 10.7%, 13.1%, 12.2%, 13.3% and 16.8%. The results shed more light on the stormwater runoff pollution mitigation on impervious surfaces and metals enrichment problems in infiltration soil on green space in the low impact development (LID) setting. The Bayesian network revealed the spatial variability of transport and fate of metal elements from land surfaces to urban lakes, supplementing the secondary pollution sources from different land use. This study will provide new insights for source apportionment of non-point source pollution under the background of sponge city construction.