Effects of microplastics of different sizes on the Chlorella vulgaris - Ganoderma lucidum co-pellets formation processes

Effects of different concentrations and particle sizes of microplastics on the full life history of freshwater Chlorella

Microplastics (MPs) as pollutants can have adverse effects on aquatic ecosystems; however, their effects on the full life history of microalgae need to be further explored and thoroughly examined. In this study, we investigated influence of polystyrene (PS) plastics with different concentrations (10/50/100 mg/L) and particle sizes (0.1/0.5/1 μm) on the full life history of Chlorella; their potential environmental risks were also analyzed. The results showed that PS(0.1um) had the strongest inhibitory effect on Chlorella growth (Max(inhibition) 68.42%), PS(0.5/1um) can not only promote (Max(promotion) 55.48% and 55.05%) but also prolong cell growth; PS has various effects on photosynthetic efficiency of Chlorella. PS(0.1um) can significantly promote Fv/Fm, inhibit RC/ABS, F0/Fv, DIo/RC, and both inhibit and promote rETRmax, but effect of PS(0.5/1μm) is generally consistent with that of control group; PS affects the morphological structure and interaction of Chlorella significantly, and can squeeze and aggregate cells. Zeta potential fluctuated greatly in the initial stage of experiment, and was stable as Relative conductivity in the later stage. About 65.5% of PS(0.1um) can enter cell, which has potential risk of entering the food chain; Statistics on long and short-term impacts showed significant differences in growth and photosynthesis efficiencies, as well as in interactions; the potential environmental risk index (PERI) indicates that class II (slightly polluted) has the highest percentage (64.72%), and that the concentration and composition of MPs are important influences on potential environmental risk. Overall, the long-term impacts of PS were diverse, but Chlorella also showed good resilience. Meanwhile, we found that most of the previous short-term studies may be one-sided and incomplete, the real impacts of MPs may be overestimated. Our research could provide scientific support for assessing the risks posed by MPs.

Soil protists are more resilient to the combined effect of microplastics and heavy metals than bacterial communities

Heavy metals and micro-/nanoplastic pollution seriously threaten the environment and ecosystems. While many studies investigated their effects on diverse microbes, few studies have focused on soil protists, and it is unclear how soil protists respond to the combined effect of micro-/nanoplastics and heavy metals. This study investigated how soil protistan and bacterial communities respond to single or combined copper and micro-/nanoplastics. The bacterial community exhibited an instantaneous response to single copper pollution, whereas the combined pollution resulted in a hysteresis effect on the protistan community. Single and combined pollution inhibited the predation of protists and changed the construction of ecological networks. Though single and combined pollution did not significantly affect the overall community structure, the exposure experiment indicated that combined pollution harmed soil amoeba's fitness. These findings offer valuable new insights into the toxic effects of single and combined pollution of copper and plastics on soil protistan and bacterial communities. Additionally, this study shows that sequencing-based analyses cannot fully reflect pollutants' adverse effects, and both culture-independent and dependent methods are needed to reveal the impact of pollutants on soil microbes.

Exposure pathways, environmental processes and risks of micro (nano) plastics to crops and feasible control strategies in agricultural regions

Micro/nanoplastics (MPs/NPs) pollution may adversely impact agricultural ecosystems, threatening the sustainability and security of agricultural production. This drives an urgent need to comprehensively understand the environmental behavior and effects of MPs/NPs in soil and atmosphere in agricultural regions, and to seek relevant pollution prevention strategies. The rhizosphere and phyllosphere are the interfaces where crops are exposed to MPs/NPs. The environmental behavior of MPs/NPs in soil and atmosphere, especially in the rhizosphere and phyllosphere, determines their plant accessibility, bioavailability and ecotoxicity. This article comprehensively reviews the transformation and migration of MPs/NPs in soil, transportation and deposition in the atmosphere, environmental behavior and effects in the rhizosphere and phyllosphere, and plant uptake and transportation pathways. The article also summarizes the key factors controlling MPs/NPs environmental processes, including their properties, biotic and abiotic factors. Based on the sources, environmental processes and intake risks of MPs/NPs in agroecosystems, the article offers several feasible pollution prevention and risk management options. Finally, the review highlights the need for further research on MPs/NPs in agro-systems, including developing quantitative detection methods, exploring transformation and migration patterns in-situ soil, monitoring long-term field experiments, and establishing pollution prevention and control systems. This review can assist in improving our understanding of the biogeochemistry behavior of MPs/NPs in the soil-plant-atmosphere system and provide a roadmap for future research.

Effect of different size microplastic particles on the construction of algal-bacterial biofilms and microbial communities

Algal-bacterial symbiotic system is a biological purification system that combines sewage treatment with resource utilization and has the dual effects of carbon sequestration and pollution reduction. In this study, an immobilized algal-bacterial biofilm system was constructed for the treatment of natural sewage. Effects of exposure to microplastics (MPs) with different particle diameters (0.065 μm, 0.5 μm and 5 μm) were determined in terms of algal biomass recovery efficiency, the composition of extracellular polymeric substances (EPS) and morphologic characteristics. The impacts of MPs on the bacterial diversity and community structure of biofilms were also examined. The metagenomic analysis of key microorganisms and related metabolism pathways involved in system was further investigated. Results showed that following exposure to 5 μm MP, a maximum algal recovery efficiency of 80% was achieved, with a minimum PSII primary light energy conversion efficiency (Fv/Fm ratio) of 0.513. Furthermore, 5 μm MP caused the highest level of damage to the algal-bacterial biofilm, enhancing the secretion of protein-rich EPS. The biofilm morphology became rough and loose following exposure to 0.5 μm and 5 μm MP. Community diversity and richness were significantly high in biofilms exposed to 5 μm MP. Proteobacteria (15.3-24.1%), Firmicutes (5.0-7.8%) and Actinobacteria (4.2-4.9%) were dominant in all groups, with exposure to 5 μm MP resulting in the highest relative abundance for these species. The addition of MPs promoted the related metabolic functions while inhibited the degradation of harmful substances by algal-bacterial biofilms. The findings have environmental significance for the practical application of algal-bacterial biofilms for sewage treatment, providing novel insights into the potential effects of MPs on immobilized algal-bacterial biofilm systems.

Treatment of antibiotic-containing wastewater with self-suspended algae-bacteria symbiotic particles: Removal performance and reciprocal mechanism

Emerging contaminants such as antibiotics in wastewater have posed a challenge on conventional biological treatment processes. Algae-bacteria symbiotic mode could improve the performance of biological treatment processes. Self-suspended algae-bacteria symbiotic particles (ABSPs) were prepared with Chlorella vulgaris and Bacillus subtilis using the sol-gel method and hollow glass microspheres in this study. The removal effect of nitrogen and phosphorus as well as the feedback mechanism of ABSPs under tetracycline stress were investigated through three-cycles wastewater treatment experiments. The antioxidant enzyme activity and phycosphere extracellular polymeric substance (EPS) content were identified as well. The results indicated that the removal rates of NH₄⁺-N, TP, COD, and tetracycline in the ABSPs group finally reached 96.18%, 95.44%, 81.36%, and 74.20%, respectively, which were higher than the single algae group apparently. The phycosphere EPS content increased by 20.41% and algae cell structure maintained integrity in ABSPs group as compared with that in single algae group. This study demonstrates that the self-suspended ABSPs can improve contaminants removal performance and alleviate the antioxidant stress response of algae through algal-bacterial reciprocity mechanism.

Characterisation of microplastics is key for reliable data interpretation

Microplastic research has gained attention due to the increased detection of microplastics (<5 mm size) in the aquatic environment. Most laboratory-based research of microplastics is performed using microparticles from specific suppliers with either superficial or no characterisation performed to confirm the physico-chemical information detailed by the supplier. The current study has selected 21 published adsorption studies to evaluate how the microplastics were characterised by the authors prior experimentation. Additionally, six microplastic types described as 'small' (10-25 μm) and 'large' (100 μm) were commercially acquired from a single supplier. A detailed characterisation was performed using Fourier transform infrared spectroscopy (FT-IR), x-ray diffraction, differential scanning calorimetry, scanning electron microscopy, particle size analysis, and N₂-Brunauer, Emmett and Teller adsorption-desorption surface area analysis. The size and the polymer composition of some of the material provided by the supplier was inconsistent with the analytical data obtained. FT-IR spectra of small polypropylene particles indicated either oxidation of the particles or the presence of a grafting agent which was absent in the large particles. A wide range of sizes for the small particles was observed: polyethylene (0.2-549 μm), polyethylene terephthalate (7-91 μm) and polystyrene (1-79 μm). Small polyamide (D₅₀ 75 μm) showed a greater median particle size and similar size distribution when compared to large polyamide (D₅₀ 65 μm). Moreover, small polyamide was found to be semi-crystalline, while the large polyamide displayed an amorphous form. The type of microplastic and the size of the particles are a key factor in determining the adsorption of pollutants and subsequent ingestion by aquatic organisms. Acquiring uniform particle sizes is challenging, however based on this study, characterisation of any materials used in microplastic-related experiments is critical to ensure reliable interpretation of results, thereby providing a better understanding of the potential environmental consequences of the presence of microplastics in aquatic ecosystems.

Microplastics pollution in freshwater sediments: The pollution status assessment and sustainable management measures

Microplastics (MPs) pollution in freshwater sediments has brought hidden dangers to food and drinking water supply. Implementing sustainable management measures for MPs pollution in freshwater sediments has become an inevitable trend for sustainable development of society. Existing studies still lacked sufficient discussion in sustainable management of MPs pollution in freshwater sediments. This makes it difficult to formulate sustainable management measures for MPs pollution in freshwater sediments. This study analyzed the pollution status of MPs in freshwater sediments from 84 study areas. The results showed that current studies on MPs pollution in freshwater sediments were mainly concentrated in densely populated and economically developed areas. The average abundance of MPs in freshwater sediments from collected study areas was 1290.88 items/kg, this brought a potential threat to sustainable development in surrounding areas. The pollution load level and potential ecological risk level of MPs in freshwater sediments from these study areas were low. Reducing MPs discharge and restricting the use of high-risk polymers are effective ways to prevent the deterioration of MPs pollution status in freshwater sediments. The abundance and types of MPs in freshwater sediments from these study areas were affected by human activities. Sustainable management of MPs pollution in freshwater sediments from collected study areas requires establishing a lifecycle management system for plastic products, and the industrial structures should be optimized. In addition, legislation and market regulation are effective ways to restrict the discharge of plastic wastes. Sustainable management of MPs in freshwater sediments requires the synergy of legislation and market regulation.

Adsorption characteristics of antibiotics on microplastics: The effect of surface contamination with an anionic surfactant

Microplastics and antibiotics are common, typical pollutants, and they can cause compound pollution where they coexist in the environment. Surfactants in the environment can change the interface characteristics of pollutants, and then drive the change of environmental behavior of pollutants. In this paper, we studied the physicochemical properties of complexes of polystyrene (PS) and polyethylene (PE) contaminated with sodium dodecyl benzene sulfonate (SDBS); the complexes are referred to as SPS and SPE, respectively. Taking oxytetracycline (OTC) and norfloxacin (NOR) as representatives of broad-spectrum antibiotics, the effects of SDBS on the adsorption behavior of PS and PE were analyzed and possible mechanisms were proposed. The results showed that SDBS could effectively combine with PS and PE to enhance the surface electronegativity and reduce the Brunner-Emmett-Teller (BET) specific surface area and porosity. The crystal structure remained basically unchanged, and the surface functional groups changed slightly. SDBS greatly enhanced the saturated adsorption capacities of PS and PE for OTC and NOR, and made adsorption easier, which reduced the Gibbs free energy of the adsorption system. The adsorption behaviors of SPS and SPE for the two antibiotics were consistent with the Elovich kinetic model and Sips isothermal model. SDBS enhanced the hydrophilicity of the microplastics, which facilitated their adsorption of antibiotics dissolved in water. SDBS could directly combine with antibiotics to form a complex, further increasing the adsorption capacity of the microplastics for antibiotics. The -SO₃H in SDBS could combine with oxygen-containing functional groups and -NH₂ in OTC and NOR. Non-ionic covalent bonds, electrostatic interactions, and hydrophobic attraction between the alkyl chain and benzene ring also played a role in adsorption. SDBS made it possible for MPs to load more types and quantities of pollutants and change their preferential adsorption selectivity, which significantly aggravated the environmental hazards.