Recyclable & highly porous organo-aerogel adsorbents from biowaste for organic contaminants' removal

Development of biomass aerogels with aligned channels: For continuous treatment of oily wastewater and solar-powered oil evaporation

A biomass CS/CNTs@MTMS (MCCS) aerogel with both aligned channel network, superhydrophobicity, and photothermal conversion ability was prepared by a green and facile strategy of directed freeze-drying and chemical vapor deposition using chitosan (CS), carbon nanotubes (CNTs), and methyltrimethoxysilane (MTMS) as the building materials. Capacity to adsorb a large variety of oils and organic solvents, with an adsorption capacity of up to 34-83 g/g. After 10 cycles, the adsorption capacity of MCCS remained at 94 % of the initial capacity, providing excellent reusability. In addition, due to its unique network of aligned channels, the MCCS can continuously separate oil and water, making it a sustainable oil-water separator. More interestingly, the MCCS aerogel has excellent photothermal conversion capabilities, and it was utilized to evaporate oil collected during the oil-water separation process using solar energy. This work provides an opportunity to design novel self-cleaning photothermally driven oil-water separation biomass materials with superhydrophobicity-strong lipophilicity.

Porous lignin-based composites for oil/water separation: A review

Frequent oceanic oil spill incidents and the discharge of industrial oily wastewaters have caused serious threats to environments, food chains and human beings. Lignin wastes with many reactive groups exist as the byproducts from bioethanol and pulping processing industries, and they are either discarded as wastes or directly consumed as a fuel. To make full use of lignin wastes and simultaneously deal with oily wastewaters, porous lignin-based composites have been rationally designed and prepared. In this review, recent advances in the preparation of porous lignin-based composites are summarized in terms of aerogels, sponges, foams, papers, and membranes, respectively. Then, the mechanisms and the application of porous lignin-based adsorbents and filtration materials for oil/water separation are discussed. Finally, the challenges and perspectives of porous lignin-based composites are proposed in the field of oil/water separation. The utilization of abundant lignin wastes can replace fossil resources, and meanwhile porous lignin-based composites can be used to efficiently treat with oily wastewaters. The above utilization strategy opens an avenue to the rational design and preparation of lignin wastes with high-added value, and gives a possible solution to use lignin wastes in a sustainable and environmentally friendly way.

Application of conventional and emerging low-cost adsorbents as sustainable materials for removal of contaminants from water

The impact of water pollution has led to the search for cost-effective and environmentally friendly treatment processes to alleviate the associated environmental hazards. Adsorption is identified as an advanced treatment technology that offers simplicity and cheap alternatives to water treatment technologies when low-cost adsorbents such as industrial by-products, waste, and agricultural waste are utilized. The utilization of these materials as low-cost adsorbents for the treatment of drinking water will bring them some value. Several practices have been done to improve the removal efficiencies of the low-cost adsorbents in order to achieve WHO standards of drinking water quality. The paper highlights some of the synthesis routes employed for the modification of low-cost adsorbents. This updated review provides information on the different applications of low-cost adsorbents in removing pollutants and their adsorption capacities in an attempt to deploy the recent sustainable low-cost adsorbents with high removal efficiencies for water treatment. Future research should focus on the fabrication of hybrid low-cost adsorbents with multifunctional and antimicrobial properties. In addition, life cycle assessment (LCA) should be conducted to reveal the environmental burdens associated with the modification of the low-cost adsorbent to improve their removal efficiencies.

Ultralight and highly efficient oil-water selective aerogel from carboxymethyl chitosan and oxidized β-cyclodextrin for marine oil spill cleanup

Biomass-based aerogels for oil spill cleanup have attracted tremendous research interests due to their feasibility in oil-water separation. However, the cumbersome preparation process and toxic cross-linking agents hinder their application. In this work, a facile and novel method to prepare hydrophobic aerogels is reported for the first time. Da-β-CD/CMCS aerogel (DCA), Da-β-CD/CMCS/PVA aerogel (DCPA), and hydrophobic Da-β-CD/CMCS/PVA aerogel (HDCPA) were successfully synthesized via the Schiff base reaction between carboxymethyl chitosan (CMCS) and dialdehyde β-cyclodextrin (Da-β-CD). Meanwhile, polyvinyl alcohol (PVA) acted as reinforcement and hydrophobic modification was conducted via chemical vapor deposition (CVD). The structure, mechanical properties, hydrophobic behaviors and absorption performance of aerogels were comprehensively characterized. The results indicated that the DCPA containing 7 % PVA exhibited excellent compressibility and elasticity even at a compressive strain of ε = 60 %, however, the DCA without PVA showed incompressibility, suggesting that the important role played by PVA in improving compressibility. Moreover, HDCPA possessed excellent hydrophobicity (water contact angle up to 148.4°), which could be well maintained after experiencing wear and corrosion in harsh environments. HDCPA also possesses high absorption capacities (24.4-56.5 g/g) towards different oils with satisfied recyclability. These advantages endow HDCPA with great potential and application prospects in offshore oil spill cleanup.

Cleanup of oils and organic solvents from contaminated water by biomass-based aerogel with adjustable compression elasticity

Leakage of oils and organic solvents poses a significant threat to aquatic environments. Here, low-temperature carbonized aerogels with highly porous and anisotropic structures obtained only from biomass-derived materials were proposed to absorb polymorphic oils from contaminated water. Specifically, carbonized aerogels prepared at temperatures of 300 °C and 350 °C exhibited ultra-high absorption capacities (40‒125 g g^-1) and oil-water separation efficiencies (> 99%) even in harsh environments, which were attributed to their exceptional properties, including high porosity, abundant macropores, excellent thermal stability, and hydrophobicity. Through citric acid crosslinking and low-temperature carbonization, the aerogels exhibited superior compression elasticity and could be cyclically utilized through simple extrusion while realizing the recovery of oils. Moreover, the outstanding photothermal conversion properties obtained through carbonization contributed to the high temperature and fluidity of the oils surrounding the aerogels, which is crucial for improving the absorption performance of high-viscosity oils. Such absorbent materials are used to separate crude oil from oil-water mixtures, which can achieve maximum absorption of 56 g g^-1 and increase the absorption rate (from several days to 10 min) in a low-temperature (4 °C) seawater environment.

On the Sorbent Ability and Reusability of Graphene-Oxide-Chitosan Aerogels for the Removal of Dyes from Wastewater

One of the most persistent issues affecting people worldwide is water contamination due to the indiscriminate disposal of pollutants, causing severe environmental problems. Dyes are among the most harmful contaminants because of their high chemical stability and consequently difficult degradation. To remove contaminants from water, adsorption is the most widely used and effective method. In this work, we recall the results already published about the synthesis, the characterization and the use of porous graphene-oxide-chitosan aerogels as a sorbent material. Those systems, prepared by mixing GO sheets and CS chains, using APS as a cross-linking agent, and by further lyophilization, were further characterized using nano-computed tomography, supplying more understanding about their micro and nano-structure. Their sorbent ability has been investigated also by the study of their isotherm of adsorption of two different anionic dyes: Indigo Carmine and Cibacron Brilliant Yellow. Those analyses confirmed the potentialities of the aerogels and their affinity for those anionic dyes. Moreover, the possibility of regenerating and reusing the material was evaluated as a key aspect for applications of this kind. The treatment with NaOH, to promote the desorption of adsorbed dyes, and subsequent washing with HCl, to re-protonate the system, ensured the regeneration of the gels and their use in multiple cycles of adsorption with the selected water contaminants.