Spatial distribution of microplastics in volcanic lake water and sediments: Relationships with depth and sediment grain size

Modeling the spatiotemporal distribution, bioaccumulation, and ecological risk assessment of microplastics in aquatic ecosystems: A review

Microplastic (MP) pollution poses a significant threat to aquatic ecosystems. Numerical modeling has emerged as an effective tool for predicting the distribution, accumulation, and risk assessment of MPs in aquatic ecosystems. However, published work has not systematically assessed the strengths and weaknesses of various modeling approaches. Therefore, we conducted a thorough review of the main modeling approaches for MPs over the past six years. We classified the approaches into three categories as: spatial and temporal distribution, bioaccumulation, and systematic ecological risk assessment. The review analyzed application scenarios, modeling methods, and the advantages and disadvantages of models. The results indicate that the accurate simulation of MPs spatial and temporal distribution requires reasonable parameterization and comprehensive transport considerations. Meanwhile, it is important to focus on coupling process models with other types of models. To enhance risk assessment models, expanding the relevant evaluation indicators is essential.

Characterization and risk assessment of microplastics pollution in Mohamaya Lake, Bangladesh

Microplastics (MPs) have recently gained attention as emerging environmental contaminants, yet knowledge of their distribution, sources, and risks in freshwater lakes remains limited. This study examined the occurrence and risk of MPs in water and sediment samples from eight locations in Mohamaya Lake (Bangladesh) collected in April and May 2023. MPs were identified using stereomicroscopy and FTIR, revealing concentrations of 20-95 particles/L in water and 550-1900 particles/kg (d.w.) in sediment, with mean values of 50.62 ± 9.95 particles/L and 1068.75 ± 521.49 particles/kg (d.w.). Dominant MPs were blue fibers, 0-0.5 mm in size, with HDPE, PET and LDPE as the most common polymers. This study used four indices (nemerow pollution index-NPI, contamination factor-CF, pollution load index-PLI, and polymer hazard index-PHI) to assess MP pollution, revealing light to high contamination levels. While NPI indicated light pollution, CF, PLI, and PHI highlighted areas of moderate to high risk, with certain polymers showing high to extreme toxicity. This study deepens understanding of MP contamination in Bangladesh's freshwater lakes, underscoring the need for research on ecotoxicology, regulation, and associated challenges.

First report of microplastics in water and sediments of the alkaline Bagno dell'Acqua Lake (Pantelleria Island, southern Italy)

Microplastics are ubiquitous in aquatic ecosystems and lakes are considered important sinks for this contaminant. In this study, we assessed for the first time the occurrence and spatial distribution of microplastics in surficial waters and sediment of a small alkaline lake located in the National Park of Pantelleria Island (Central Mediterranean Sea). The island is small, scarcely populated, not industrialized and ∼70 km far from the southern European and northern African shores. Water samples were collected in triplicates in different sectors of the lake using a 10 L metal bucket, while sediment sampling was carried out at seven stations along the lake shoreline, plus one station at 3.6 m depth. Results show a homogeneous distribution of microplastic in surface waters, dominated by fibers (∼90%), with a mean concentration of 0.13 ± 0.04 MP/L, which is lower than most of the lakes worldwide. Conversely, microplastics in sediment had a higher proportion of fragments and films (50%) and their concentrations range from 0 to 540 MP/kg. The highest abundance was recorded in the western sector, where most of touristic activities concentrate, and at the 3.6 m depth station, thus suggesting that the deeper parts of the lake may retain the majority of microplastics entering the system. This study shows that even in small lakes far from major anthropic pressures, sediment may contain microplastics in striking abundances, pointing out the need to assess rural and remote lakes, at present much understudied compared to lakes in highly populated regions.

Tracing microplastic pollution in Mahi River estuary, Gulf of Khambhat, Gujarat, and their influence on functional traits of macrobenthos

Most maritime habitats contain microplastic (MPs) contamination. The quality of the benthic ecosystem's habitat is declining as MPs accumulate in marine system. The contamination of MPs must therefore be investigated. We studied MPs pollution in the Mahi River, estuary, and macrobenthos. In the present study, the abundance of MPs fragments gradually decreased from the high tide zone to the low tide zone and muddy sediment has high MPs concentrations due to sediment characteristics and particle size. The majority of sediment and biota MPs were fibrous and black. MPs in both silt and biota have identical chemical compositions (modified cellulose), shapes, and colors. A significant source of pollutants and MPs fluxing into the ocean is well within the river system. Perinereis aibuhitensis ingested the most MPs out of 11 species, whereas Amphipods did not show any presence of MPs. Our findings showed that functional characteristics are essential for macrobenthos MPs intake. MPs in macrobenthos are high due to biological functions such as feeding, ecological groups, feeding mechanisms, body size, and bioturbation. MPs in marine sediment and organisms are tracked down to the Mahi River exceeding 50 km. The present work has investigated the idea that the macrobenthos that live in the sediment are ingesting the MPs that are building up there and this ingestion relies on the macrobenthos' functional characteristics.

Centennial Records of Microplastics in Lake Cores in Huguangyan Maar Lake, China

Microplastic records from lake cores can reconstruct the plastic pollution history. However, the associations between anthropogenic activities and microplastic accumulation are not well understood. Huguangyan Maar Lake (HML) is a deep-enclosed lake without inlets and outlets, where the sedimentary environment is ideal for preserving a stable and historical microplastic record. Microplastic (size: 10-500 μm) characteristics in the HML core were identified using the Laser Direct Infrared Imaging system. The earliest detectable microplastics appeared unit in 1955 (1.1 items g-1). The microplastic abundance ranged from n.d. to 615.2 items g-1 in 1955-2019 with an average of 134.9 items g-1. The abundance declined slightly during the 1970s and then increased rapidly after China's Reform and Opening Up in 1978. Sixteen polymer types were detectable, with polyethylene and polypropylene dominating, accounting for 23.5 and 23.3% of the total abundance, and the size at 10-100 μm accounted for 80%. Socioeconomic factors dominated the microplastic accumulation based on the random forest modeling, and the contributions of GDP per capita, plastic-related industry yield, and total crop yield were, respectively, 13.9, 35.1, and 9.3% between 1955-2019. The total crop yield contribution further increased by 1.7% after 1978. Coarse sediment particles increased with soil erosion exacerbated microplastics discharging into the sediment.

Microplastics and PAHs mixed contamination: An in-depth review on the sources, co-occurrence, and fate in marine ecosystems

Microplastics (MPs) and polycyclic aromatic hydrocarbons (PAHs) are toxic contaminants that have been found in marine ecosystems. This review aims to explore the sources and mechanisms of PAHs and MPs mixed contamination in marine environments. Understanding the released sources of PAHs and MPs is crucial for proposing appropriate regulations on the release of these contaminants. Additionally, the mechanisms of co-occurrence and the role of MPs in distributing PAHs in marine ecosystems were investigated in detail. Moreover, the chemical affinity between PAHs and MPs was proposed, highlighting the potential mechanisms that lead to their persistence in marine ecosystems. Moreover, we delve into the various factors influencing the co-occurrence, chemical affinity, and distribution of mixed contaminants in marine ecosystems. These factors, including environmental characteristics, MPs properties, PAHs molecular weight and hydrophobicity, and microbial interactions, were critically examined. The co-contamination raises concerns about the potential synergistic effects on their degradation and toxicity. Interesting, few studies have reported the enhanced photodegradation and biodegradation of contaminants under mixed contamination compared to their individual remediation. However, currently, the remediation strategies reported for PAHs and MPs mixed contamination are scarce and limited. While there have been some initiatives to remove PAHs and MPs individually, there is a lack of research specifically targeting the removal of mixed contaminants. This deficiency highlights the need for further investigation and the development of effective remediation approaches for the efficient remediation of PAHs and MPs from marine ecosystems.

Unveiling microplastics pollution in a subtropical rural recreational lake: A novel insight

While global attention has been primarily focused on the occurrence and persistence of microplastics (MP) in urban lakes, relatively little attention has been paid to the problem of MP pollution in rural recreational lakes. This pioneering study aims to shed light on MP size, composition, abundance, spatial distribution, and contributing factors in a rural recreational lake, 'Nikli Lake' in Kishoreganj, Bangladesh. Using density separation, MPs were extracted from 30 water and 30 sediment samples taken from ten different locations in the lake. Subsequent characterization was carried out using a combination of techniques, including a stereomicroscope, Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed a significant prevalence of MPs in all samples, with an average amount of 109.667 ± 10.892 pieces/kg3 (dw) in the sediment and 98.167 ± 12.849 pieces/m3 in the water. Small MPs (<0.5 mm), fragments and transparent colored particles formed the majority, accounting for 80.2%, 64.5% and 55.3% in water and 78.9%, 66.4% and 64.3% in sediment, respectively. In line with global trends, polypropylene (PP) (53%) and polyethylene (PE) (43%) emerged as the predominant polymers within the MPs. MP contents in water and sediment showed positive correlations with outflow, while they correlated negatively with inflow and lake depth (p > 0.05). Local activities such as the discharge of domestic sewage, fishing waste and agricultural runoff significantly influence the distribution of polypropylene. Assessment of pollution factor, pollution risk index and pollution load index values at the sampling sites confirmed the presence of MPs, with values above 1. This study is a baseline database that provides a comprehensive understanding of MP pollution in the freshwater ecosystem of Bangladesh, particularly in a rural recreational lake. A crucial next step is to explore ecotoxicological mechanisms, legislative measures and future research challenges triggered by MP pollution.

Microplastic pollution characteristics and ecological risk assessment in the Wuding River Basin, China

Microplastics (MPs), as a new type of environmental pollutant, have attracted extensive attention in recent years. However, there has been relatively little research specifically focusing on MPs in the Yellow River Basin, China, particularly regarding MP migration patterns. Based on surface water and sediment samples from 19 sampling sites in the Wuding River (WDR), the abundances and characteristic distributions of MPs were analyzed, and the environmental factors affecting their distribution and potential ecological risks were evaluated. The results showed that the MP abundances in surface water and sediments of the WDR were significantly different (P < 0.05), with mean values of 2.98 ± 0.69 items/L and 419.47 ± 75.61 items/kg, respectively. In terms of MP characteristics, the most common size class was 0.1-0.5 mm in surface water. Polyethylene (PE, 32.50%) and polypropylene (PP, 27.50%) were the main polymer types of MPs in surface water. Although similar MP characteristics were observed in sediments, there were significantly more particles in the <0.1 mm particle size (P < 0.05), which was 15.0% higher than in surface water. Also, more high-density MP fragments were observed in sediment samples. The retention of MPs in sediments was influenced by the MP characteristics (density, shape, particle size) and sediment particle size. In contrast, the MP abundance in surface water was more closely related to the presence of other environmental pollutants, such as total phosphorus (WTP) and ammonia nitrogen (WAN). Temperature (T), agricultural land (AGR), and residential land (RES) only had significant effects on the distribution of MPs in surface water (P < 0.05). Potential ecological risk assessments revealed that MP pollution in sediments was more serious than in surface water, especially in the middle and lower reaches. The results of this study are important for understanding MP transport in a sandy river and for eliminating potential sources of MPs.

Distribution patterns and environmental risk assessments of microplastics in the lake waters and sediments from eight typical wetland parks in Changsha city, China

The quality of water in urban parks is closely related to people's daily lives, but the pollution caused by microplastics in park water and sediments has not been comprehensively studied. Therefore, eight typical parks in the urban area of Changsha, China, were selected, and Raman spectroscopy was used to explore the spatial distributions and compositions of the microplastics in the water and sediments, analyze their influencing factors, and evaluate their environmental risks. The results showed that the abundances of surface water microplastics in all parks ranged from 150 to 525 n L-1, and the abundances of sediment microplastics ranged from 120 to 585 n kg-1. The microplastics in the surface water included polyethylene terephthalate (PET), chlorinated polyethylene (CPE), and fluororubber (FLU), while those in the sediments included polyvinyl chloride (PVC), wp-acrylate copolymer (ACR), and CPE. Regression analyses revealed significant positive correlations between human activities and the abundances of microplastics in the parks. Among them, the correlations of population, industrial discharge and domestic wastewater discharge with the abundance of microplastics in park water were the strongest. However, the correlations of car flow and tourists with the abundance of microplastics in park water were the weakest. Based on the potential ecological risk indices (PERI) classification assessment method, the levels of microplastics in the waters and sediments of the eight parks were all within the II-level risk zone (53-8,549), among which the risk indices for Meixi Lake and Yudai Lake were within the IV risk zone (1,365-8,549), which may have been caused by the high population density near the park. This study provides new insights into the characteristics of microplastics in urban park water and sediment.

Spatial distribution and vertical characteristics of microplastics in the urban river: The case of Qinhuai River in Nanjing, China

Microplastics (MPs) are emerging as global environmental pollutants, significantly influencing the safety of city rivers. This study investigated six sampling sites in the Qinhuai River of Nanjing, which explored the distribution and characteristics of MPs and the microbial structure in 2023. The studied river contained various levels of MPs with average concentrations of 667.68 items/L, whose abundance firstly decreased midstream and then increased downstream. The MPs abundance upstream was higher in surface water column, microplastics midstream and downstream accumulated more in deep water column. Black and blue are prevalent in the color distribution, while the polymers of PC, PP and PS changed with increasing depth, with a proportion of 74 % ∼ 97 % in the dominant shapes of granules. Furthermore, the water with higher MPs may stimulate the growth of MPs-related bacteria in sediments, including the genus of Pseudoxanthomonas and Dechloromonas. Our research will provide constructive support for enhancing urban river management strategies.

What is hiding below the surface - MPs including TWP in an urban lake

Inland lakes play an important role as habitats for local species and are often essential drinking water reservoirs. However, there is limited information about the presence of microplastics (MPs) in these water bodies. Thirteen sediment samples were collected across a Danish urban lake to map MPs, including tyre wear particles (TWP). The lower size detection limit was 10 µm. MPs were quantified as counts, size, and polymer type by Fourier-transform infrared microspectroscopy (µFTIR) and mass estimated from the 2D projections of the MPs. As TWP cannot be determined by µFTIR, counts and sizes could not be quantified by this technique. Instead, TWP mass was determined by pyrolysis gas chromatography mass spectrometry (Py-GC/MS). The average MP abundance was 279 mg kg-1 (µFTIR), of which 19 mg kg-1 (Py-GC/MS) were TWP. For MPs other than tyre wear, the average MP count concentration was 11,312 counts kg-1. Urban runoff from combined sewer overflows and separate stormwater outlets combined with outflow from a wastewater treatment plant were potential point sources. The spatial variation was substantial, with concentrations varying several orders of magnitude. There was no pattern in concentration across the lake, and the distribution of high and low values seemed random. This indicates that large sampling campaigns encompassing the entire lake are key to an accurate quantification. No preferential spatial trend in polymer characteristics was identified. For MPs other than TWP, the size of buoyant and non-buoyant polymers showed no significant difference across the lake, suggesting that the same processes brought them to the sediment, regardless of their density. Moreover, MP abundance was not correlated to sediment properties, further indicating a random occurrence of MPs in the lake sediments. These findings shed light on the occurrence and distribution of MPs, including TWP, in an inland lake, improving the basis for making mitigation decisions.

Low-density polyethylene microplastics and biochar interactively affect greenhouse gas emissions and microbial community structure and function in paddy soil

Paddy soils are susceptible to microplastics (MPs) contamination. As a common soil amendment, biochar (BC) has been extensively applied in paddy fields. The co-occurrence of MPs and BC may cause interactive effects on soil biogeochemical processes, which has yet been well studied. In this study, a 41-days of microcosm experiment was conducted using paddy soil added with 0.5-1.5 wt% of low-density polyethylene (LDPE) and 5 wt% of BC individually or jointly. Application of BC, LDPE, or their mixture into soil significantly increased the emission of methane (CH4), but suppressed the emission of carbon dioxide (CO2). LDPE addition lowered soil nitrous oxide (N2O) emissions, while BC exerted an opposite effect. Proteobacteria was the most dominant phylum with a relative abundance range of 35.1-51.0%, followed by Actinobacteria (19.3-30.9%) and Acidobacteria (7.5-23.5%). The abundances of the mcrA gene and pH values were increased in soils added with BC or/and LDPE, which were the possible reasons for the higher CH4 emissions in these treatments. The emission of N2O was positively related to the abundances of norB and narG genes, suggesting denitrification was a major pathway to produce N2O. Results of structural equation modeling demonstrated that addition of BC or/and LDPE MPs could affect greenhouse gas emissions from paddy soil by altering soil chemical properties, microbial community structure, and functional gene abundances.

Comparison of spatiotemporal burial and contamination of heavy metals in core sediments of two plateau lakes with contrasting environments: implication for anthropogenic-driven processes

Investigating the impacts of climatic factors and human activities on sedimentary records of heavy metal (HM) contamination in lakes is essential for decision-making in global environmental monitoring and assessment. Spatiotemporal distributions of grain size (GS) and HM (Al, Cr, Mn, Ni, Cu, Zn, As, and Pb) concentrations have been conducted in core sediments that are collected from two adjacent plateau fault-bound lakes in southwest China with contrasting environments, i.e., deep oligotrophic Lake Fuxian (FX) and shallow hypertrophic Lake Xingyun (XY). Results showed that the average value of d50 in FX (4.61 μm) was lower than that in XY (8.35 μm), but the average concentrations of HMs (except Cr and Mn) in XY were higher than those in FX. Heavy metal burial rates (HMBR) were mainly controlled by sediment accumulation rates (SARs) rather than HM concentrations. The correlation coefficients between GS and HM concentrations became strong as the increasing water depths were associated with a stable sedimentary environment. Time-integrated enrichment factors (EF) and source identification of HMs between FX and XY represented that Cr, Ni, and Cu originated from natural sources but Mn, Zn, As, and Pb from anthropogenic sources, respectively. Regardless of FX and XY, the transition times of HMs from natural to anthropogenic sources occurred in the mid-1960s. Comparison of qualification impacts of climatic factors and human-induced factors on increased anthropogenic HMBR by the partial least squares path modeling (PLS-PM) implied that socio-economic activities, such as population density (PD) and gross domestic product (GDP), provided higher contributors to increased anthropogenic HMBR in XY (0.23/0.71) than FX (0.11/0.18). The comparative results of this study provided new insights into environmental monitoring and management of HM contamination for adjacent lakes with contrasting environments.

Distribution of microplastics in the catchment region of Pallikaranai marshland, a Ramsar site in Chennai, India

Microplastics are persistent toxic pollutants, detected in different environmental compartments. Numerous studies on the characteristics and distribution of microplastics present in different environmental matrices are being carried out. However, limited studies have been performed in environmental systems like eco-sensitive freshwater marshlands. Therefore, to enrich the existing knowledge and understanding, this current study has analysed the distribution and characteristics of microplastics present in the catchment region of Pallikaranai marshland, Chennai, India. Both surface water and sediment samples were contaminated with microplastics in the range of 740-2826 items/m³and 700 to 5833 items/kg of dry sediment, respectively. Compared to other shapes, fibrous microplastics were predominant in most of the surface water (n = 11) and sediment (n = 8) samples. The abundant presence of smaller microplastics (<1 mm) in the surface water suggests elevated impacts on the aquatic species owing to their higher bioavailability. Elevated anthropogenic activities and frequent movement of people in urban and residential areas were noted to possibly influence the spatial distribution of microplastics. Furthermore, heavy metals' occurrence on microplastics was investigated using X-Ray Fluorescence Analyser (XRF) and Zn, Fe, Ti, and Ni are the commonly detected (>50% of the samples) elements. The estimated average pollution load index of 2.5 indicates the polluted state of Pallikaranai catchment region.

Understanding plasticiser leaching from polystyrene microplastics

Plastic pollution in our oceans is of growing concern particularly due to the presence of toxic additives, such as plasticisers. Therefore, this work aims to develop a comprehensive understanding of the leaching properties of plasticisers from microplastics. This work investigates the leaching of phthalate acid ester (dioctyl terephthalate (DEHT) and diethylhexyl phthalate (DEHP)) and diphenol (bisphenol A (BPA) and bisphenol S (BPS)) plasticisers from polystyrene (PS) microplastics (mean diameter = 136 μm to 1.4 mm) under controlled aqueous conditions (temperature, agitation, pH and salinity). The leaching behaviours of plasticised polymers were quantified using gel permeation chromatography, high performance liquid chromatography and thermal gravimetric analysis, and the particle's plasticisation characterised using differential scanning calorimetry. Leaching rates of phthalate acid ester and diphenol plasticisers were modelled using a diffusion and boundary layer model, whereby these behaviours varied depending on their plasticisation efficiency of PS, the size of the microplastic particle and the surrounding abiotic conditions. Leaching behaviours of DEHT and DEHP were strongly influenced by the microplastic-surface water boundary layer properties, thus wave action (i.e., water agitation) increased the leaching rate of these plasticiser up to 66 % over 21-days, whereas BPA and BPS plasticisers displayed temperature- and size-dependent leaching and were limited by molecular diffusion throughout the bulk polymer (i.e., the microplastic). This information will improve predictions of plasticiser concentration (both that remain in the plastic and released into the surrounding water) at specific time points during the lifetime of a plastic, ultimately ensuring greater accuracy in the assessment of toxicity responses and environmental water quality.

Microplastics in Abiotic Compartments of a Hypersaline Lacustrine Ecosystem

The study of microplastics in inland water bodies has been growing recently, but there is still insufficient knowledge of the status of microplastics in lacustrine ecosystems, especially saline lakes. Studies have also been conducted on sediment, water, and biological compartments of lakes. In the present study, the status of microplastics in abiotic compartments of the saline Maharloo Lake (Iran) was evaluated for the first time and included surface sediment, lake salt, sludge, lake water, and wastewater. A total of 742 microplastics, mainly clear and fibrous, ranging from 50 to 250 µm in size and composed of polypropylene and polyethylene terephthalate, were identified in 33 samples. Mean microplastic concentrations in solid samples were higher than in liquid ones, with the highest levels (51.7 microplastics kg^-1 ) in sludge and the lowest levels in lake salt (10.4 microplastics kg^-1 ). The highest microplastic levels were found in the northwest area of the lake, where wastewater effluents from urban, industrial, and agricultural activities discharge into the lake. Inter-relationship assessments of microplastics with hierarchical cluster analysis suggested that differences in the distribution of microplastics with different physical properties in Maharloo Lake are greatly affected by weathering processes and proximity to contaminated hotspots. Our results reveal that the widespread occurrence of microplastics in Maharloo Lake mostly originates from potential plastic sources in urban areas of Shiraz Metropolis and its industrial zone in the vicinity of the study area; thus microplastics are dispersed into the lake via surface runoffs, especially wastewater inflows. Environ Toxicol Chem 2023;42:19-32. © 2022 SETAC.

Microplastics profile in constructed wetlands: Distribution, retention and implications

Wastewater and stormwater are both considered as critical pathways contributing microplastics (MPs) to the aquatic environment. However, there is little information in the literature about the potential influence of constructed wetlands (CWs), a commonly used wastewater and stormwater treatment system. This study was conducted to investigate the abundance and distribution of MPs in water and sediment at five CWs with different influent sources, namely stormwater and wastewater. The MP abundance in the water samples ranged between 0.4 ± 0.3 and 3.8 ± 2.3 MP/L at the inlet and from 0.1 ± 0.0 to 1.3 ± 1.0 MP/L at the outlet. In the sediment, abundance of MPs was generally higher at the inlet, ranging from 736 ± 335 to 3480 ± 4330 MP/kg dry sediment and decreased to between 19.0 ± 16.4 and 1060 ± 326 MP/kg dry sediment at the outlet. Although no significant differences were observed in sediment cores at different depth across the five CWs, more MPs were recorded in silt compared to sandy sediment which indicated sediment grain size could be an environmental factor contributing to the distribution of MPs. Polyethylene terephthalate (PET) fibres were the dominant polymer type found in the water samples while polyethylene (PE) and polypropylene (PP) fragments were predominantly recorded in the sediment. While the size of MPs in water varied across the studied CWs, between 51% and 64% of MPs in the sediment were smaller than 300 μm, which raises concerns about the bioavailability of MPs to a wider range of wetland biota and their potential ecotoxicological effects. This study shows that CWs can not only retain MPs in the treated water, but also become sinks accumulating MPs over time.