Hot-pressed membrane assemblies enhancing the biofilm formation and nitrogen removal in a membrane-aerated biofilm reactor

Enhanced denitrification of the AO-MBBR system used for expressway service area sewage treatment: A new perspective on decentralized wastewater treatment

Decentralized wastewater treatment warrants considerable development in numerous countries and regions. Owing to the unique characteristics of high ammonia nitrogen concentrations and low carbon/nitrogen ratio, nitrogen removal is a key challenge in treating expressway service area sewage. In this study, an anoxic/oxic-moving bed biofilm reactor (A/O-MBBR) and a traditional A/O bioreactor were continuously operated for 115 days and their outcomes were compared to investigate the enhancement effect of carriers on the total nitrogen removal (TN) for expressway service area sewage. Results revealed that A/O-MBBR required lower dissolved oxygen, exhibited higher tolerance toward harsh conditions, and demonstrated better shock load resistance than traditional A/O bioreactor. The TN removal load of A/O-MBBR reached 181.5 g‧N/(m3‧d), which was 15.24% higher than that of the A/O bioreactor. Furthermore, under load shock resistance, the TN removal load of A/O-MBBR still reached 327.0 g‧N/(m3‧d), with a TN removal efficiency of above 80%. Moreover, kinetics demonstrated that the denitrification rate of the A/O-MBBR was 121.9% higher than that of the A/O bioreactor, with the anoxic tank biofilm contributing 60.9% of the total denitrification rate. Community analysis results revealed that the genera OLB8, uncultured_f_Saprospiraceae and OLB12 were the dominant in biofilm loaded on carriers, and OLB8 was the key for enhanced denitrification. FAPROTAX and PICRUSt2 analyses confirmed that more bacteria associated with nitrogen metabolism were enriched by the A/O-MBBR carriers through full denitrification metabolic pathway and dissimilatory nitrate reduction pathway. This study offers a perspective into the development of cost-effective and high-efficiency treatment solutions for expressway service area sewage.

Effects of salinity on the performance, microbial community, and functional genes among 4-chlorophenol wastewater treatment

Chlorophenols frequently occur alongside salinity in industrial wastewater; thus, the effects of low concentrations of salinity (NaCl, 100 mg/L) on sludge performance, microbial community, and functional genes were deeply analyzed among 4-chlorophenol (4-CP, 2.4-4.0 mg/L) wastewater treatment. The influent 4-CP was effectively degraded, but the efficiencies for PO₄^3--P, NH₄⁺-N, and organics reduction were slightly inhibited by NaCl stress. Long-term NaCl and 4-CP stress significantly stimulated the secretion of extracellular polymeric substances (EPS). The abundances of predominant microbes at different taxonomic levels were affected by NaCl, and the increased relative abundances of functional genes encoding proteins contributed to resist NaCl and 4-CP stress. The functional genes associated with phosphorus metabolism and nitrogen metabolism in nitrification were unaffected, but the functional genes in denitrification increased in diversity under NaCl stress in 4-CP wastewater treatment. This finding acquires useful insight into the wastewater treatment with low chlorophenols and low salinity.

Membrane-aerated biofilm reactor (MABR): recent advances and challenges

Membrane-aerated biofilm reactor (MABR) has been considered as an innovative technology to solve aeration issues in conventional bioreactors. MABR uses a membrane to supply oxygen to biofilm grown on the membrane surface. MABR can perform bubbleless aeration with high oxygen transfer rates, which can reduce energy requirements and expenses. In addition, a unique feature of counter-diffusion creates a stratified biofilm structure, allowing the simultaneous nitrification–denitrification process to take place in a single MABR. Controlling the biofilm is crucial in MABR operation, since its thickness significantly affects MABR performance. Several approaches have been proposed to control biofilm growth, such as increasing shear stress, adding chemical agents (e.g., surfactant), using biological predators to suppress microorganism growth, and introducing ultrasound cavitation to detach biofilm. Several studies also showed the important role of membrane properties and configuration in biofilm development. In addition, MABR demonstrates high removal rates of pollutants in various wastewater treatments, including in full-scale plants. This review presents the basic principles of MABR and the effect of operational conditions on its performance. Biofilm formation, methods to control its thickness, and membrane materials are also discussed. In addition, MABR performance in various applications, full-scale MBRs, and challenges is summarized.