Highly efficient adsorption of chromium on N, S-codoped porous carbon materials derived from paper sludge

One-step synthesis of ferrous disulfide and iron nitride modified hydrochar for enhanced adsorption and reduction of hexavalent chromium in Bacillus LD513 by promoting electron transfer and microbial metabolism

Microbial immobilization technology is effective in improving bioremediation efficiency and heavy metal pollution. Herein, Bacillus LD513 with hexavalent chromium (Cr(VI)) tolerance was isolated and immobilized on a novel ferrous disulfide (FeS2)/iron nitride (FeN) modified hydrochar (Fe3-SNHC) prepared from waste straws. The prepared Fe3-SNHC-based LD513 (FeLD) significantly improves Cr(VI) adsorption and reduction by 31.4 % and 15.7 %, respectively, compared to LD513 alone. Furthermore, the FeLD composite system demonstrates efficient Cr(VI) removal efficiency and good environmental adaptability under different culture conditions. Microbial metabolism and electrochemical analysis indicate that Fe3-SNHC is an ideal carrier for protecting LD513 activity, promoting extracellular polymer secretion, and reducing oxidative stress. Additionally, the carrier serves as an electron shuttle that accelerates electron transfer and promotes Cr(VI) reduction. Overall, FeLD is an environmentally friendly biocomposite that shows good promise for reducing Cr(VI) contamination in wastewater treatment.

Adsorption and reduction of Cr(VI) by N, S co-doped porous carbon from sewage sludge and low-rank coal: Combining experiments and theoretical calculations

Herein, a novel N, S co-doped porous carbon (S5C5-AC) for Cr(VI) removal was prepared by co-hydrothermal carbonization (HTC) of sewage sludge (SS) and low-rank coal (LC) combining with KOH modification. The results showed that S5C5-AC had excellent adsorption performance on Cr(VI), and lower pH value, higher initial concentration and longer contact time were beneficial for Cr(VI) adsorption. The adsorption kinetics and isotherms revealed that Cr(VI) adsorption by S5C5-AC was homogeneous and dominated by chemisorption. The adsorption isotherm showed that the maximum equilibrium adsorption capacity of S5C5-AC for Cr(VI) was 382.04 mg/g at 25 °C. Furthermore, the results showed that the main mechanisms for Cr(VI) removal were the pore filling, electrostatic interaction and reduction. Moreover, the electron transfer mechanism during the adsorption and reduction process was further explored at the molecular and electronic levels by density functional theory (DFT) and front orbital theory (FOT) simulations. The analysis of DFT and FOT indicated that the synergistic effect between S and N functional groups was exhibited during the Cr(VI) removal process. Considering the existence of synergistic effects between N and S functional groups during adsorption, the S and N content and form were modified collaboratively. Increasing the relative content of pyrrolic N may be the most effective pathway for improving removal performance. Besides that, S5C5-AC exhibited excellent adsorption capacity over a high coexisting ion concentration range and various actual water bodies and regeneration performance, which indicated that S5C5-AC had promising potential for the remediation of wastewater in industrial applications.

Selective removal of Pb(II) from yellow rice wine using magnetic carbon-based adsorbent

BACKGROUND

The non-distilled property and prolonged production period of yellow rice wine have significantly increased the metal residue problem, posing a threat to human health. In this study, a magnetic carbon-based adsorbent, named magnetic nitrogen-doped carbon (M-NC), was developed for the selective removal of lead(II) (Pb(II)) from yellow rice wine.

RESULTS

The results showed that the uniformly structured M-NC could be easily separated from the solution, exhibiting a high Pb(II) adsorption capacity of 121.86 mg g-1 . The proposed adsorption treatment showed significant Pb(II) removal efficiencies (91.42-98.90%) for yellow rice wines in 15 min without affecting their taste, odor, and physicochemical characteristics of the wines. The adsorption mechanism studied by X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared (FTIR) analyses indicated that the selective removal of Pb(II) could be attributed to the electrostatic interaction and covalent interaction between the empty orbital of Pb(II) and the π electrons of the N species on M-NC. Additionally, the M-NC showed no significant cytotoxicity on the Caco-2 cell lines.

CONCLUSION

Selective removal of Pb(II) from yellow rice wine was achieved using magnetic carbon-based adsorbent. This facile and recyclable adsorption operation could potentially address the challenge of toxic metal pollution in liquid foods. © 2023 Society of Chemical Industry.

Biochar-based microporous nanosheets-mediated nanoconfinement for high-efficiency reduction of Cr(VI)

Biochar-based materials have been widely used to remove Cr(VI). However, current strategies mainly focus on slow adsorption through electrostatic and functional group properties, ignoring the confinement catalytic fast kinetics caused by inherent porous properties. Herein, we designed a confinement strategy to achieve high-efficiency Cr(VI) reduction by encapsulating the catalytic reaction of Cr(VI) and oxalic acid (OA) in the micropore of PCRN-3-10-2-800. The results showed that the removal rate constant of the PCRN-3-10-2-800/OA system was 14.3 and 146.8 times higher than that of the BC-800/OA system (low porosity) and PCRN-3-10-2-800 alone (adsorption), which was highest removal rate constant in the current reported materials under the same system. The structure-activity relationship indicated that the catalytic activity of Cr(VI) depended on the micropore characteristics of the catalyst. Density functional theory calculations confirmed that nanoscale space could enhance Cr(VI) adsorption and reduce the energy barrier of the rate-determining step. The electron paramagnetic resonance spectrum demonstrated the rapid conversion of Cr(VI) to Cr(III). Furthermore, the PCRN-3-10-2-800/OA system showed good applicability and high efficiency for Cr(VI) removal (nearly 100% in 5 min) in industrial electroplating wastewater treatment. This work first proposes a nanoconfinement-induced heavy metal reduction strategy and guides biochar's universality design in wastewater treatment.

N,S-codoped biochar outperformed N-doped biochar on co-activation of H2O2 with trace dissolved Fe(Ⅲ) for enhanced oxidation of organic pollutants

Co-activation of H2O2 with biochar and iron sources together provides an attractive strategy for efficient removal of refractory pollutants, because it can solve the problems of slow Fe(Ⅱ) regeneration in Fenton/Fenton-like processes and of low •OH yield in biochar-activated process. In this study, a wood-derived biochar (WB) was modified by heteroatom doping for the objective of enhancing its reactivity toward co-activation of H2O2. The performance of the co-activated system using doped biochars and trace dissolved Fe(Ⅲ) on oxidation of organic pollutants was evaluated for the first time. The characterizations using X-ray photoelectron spectroscopy (XPS), Raman spectra and electrochemical analyses indicate that heteroatom doping introduced more defects in biochar and improved its electron transfer capacity. The oxidation experiments show that heteroatom doping improved the performance of biochar in the co-activated process, in which the N,S-codoped biochar (NSB) outperformed the N-doped biochar (NB) on oxidation of pollutants. The reaction rate constant (kobs) for oxidation of sulfadiazine in NSB + Fe + H2O2 is 2.25 times that in NB + Fe + H2O2, and is 72.9 times that in the Fenton-like process without biochar, respectively. The mechanism investigations indicate that heteroatom doping enhanced biochar's reactivity on catalyzing the decomposition of H2O2 and on reduction of Fe(Ⅲ) due to the improved electron transfer/donation capacity. In comparison with N-doping, N,S-codoping provided additional electron donor (thiophenic C-S-C) for faster regeneration of Fe(Ⅱ) with less amount of doping reagent used. Furthermore, co-activation with NSB maintained to be efficient at a milder acidic pH than Fenton/Fenton-like processes, and can be used for oxidation of different pollutants and in real water. Therefore, this research provides a novel, sustainable and cost-efficient method for oxidation of refractory pollutants.

Synergistic reduction of Cr(VI) by graphite N and thiophene S of N, S-co-doped hydrochar derived from waste straw

An efficient, simple, and inexpensive N, S-co-doped hydrochar (SNHC) was synthesized from waste straw by a one-pot hydrothermal process without calcination for the removal of Cr(VI). SNHC demonstrated excellent adsorption performance for Cr(VI) and high stability, achieving a high capacity of 171.33 mg/g (293 K, pH 2) and a capacity retention of 82.73 % after five cycles. The adsorption behavior was determined as a multilayer adsorption process based on chemisorption according to the simulation the results of Freundlich adsorption isotherms and pseudo-second-order models. The characterization of SNHC revealed that graphite N and thiophene S formed by the material were the effective active sites, functioning as electron donors to contribute a significant amount of electrons to reduce Cr(VI) to Cr(III). Therefore, next to electrostatic adsorption and complexation, the synergistic reduction of Cr(VI) by graphite N and thiophene S was the main mechanism for Cr(VI) removal. Additionally, density functional theory calculations indicated a low adsorption energy of thiophene S, which increased the attractive interaction between SNHC and Cr(VI) and played the most important role in reducing Cr(VI). The mechanism of the effect of graphite N and thiophene S on Cr(VI) removal not only offered a comprehensive perspective on the role of N, S co-doped mediation in hydrochar but also provided the basic theory for its practical application.

Efficient adsorption of heavy metals from wastewater on nanocomposite beads prepared by chitosan and paper sludge

Chitosan was commonly used with inorganic salt and organic compounds to prepare adsorption material for water treatment. Different materials were mixed for the preparation, leading to a high cost for water treatment. Sludge from papermaking has abundant fiber and inorganic salt, which can reduce the addition of raw materials in preparing the adsorption material and thus lower the cost. This work used recycled industrial paper sludge to prepare adsorption material to remove heavy metals from wastewater. The adsorption properties of the prepared sludge-chitosan material for Cu²⁺ and Cr³⁺ in wastewater were investigated. The impacts of adsorption time, pH, and initial concentrations of Cu²⁺ and Cr³⁺ on adsorption amount were studied and optimized. The saturated adsorption capacity of sludge-chitosan material for Cu²⁺ and Cr³⁺ can reach 114.6 and 110.3 mg/g. The adsorption kinetics satisfied the pseudo-second-order model, indicating two modes, physical diffusion, and chem-sorption, in the heavy metal adsorption by the sludge-chitosan materials. Physical distribution has little Effect on chemical adsorption. The materials can be applied to treating Cu²⁺ and Cr³⁺ containing wastewater with the proposed cheap and readily available sludge-chitosan material. The results confirmed that sludge-chitosan material possessed good regeneration performance and was an ideal adsorbent.