Synthesis and adsorption performance of three-dimensional gels assembled by carbon nanomaterials for heavy metal removal from water: A review

Self-protected Chlorella@Mn catalyst with excellent resistance to alkali/alkaline earth metal for NOx reduction by NH3

In the selective catalytic reduction of NOx by NH3 (NH3-SCR), conventional Mn-based denitration catalysts often suffered from susceptibility to poisoning by alkali and alkaline earth metals, this paper presented an innovative self-protected Chlorella@Mn denitration catalyst. Remarkably, in the presence of high concentrations (2 wt%) of alkali and alkaline earth metal oxides, the Chlorella@Mn catalyst sustained a NOx conversion exceeding 96 % at 175 °C. At an even higher concentration (4 wt%), NOx conversion above 90 % at 175 °C, surface analysis revealed that POMn sites acted as sacrificial sites, binding to the alkali and alkaline earth metals, the Chlorella@Mn catalyst surface naturally carried a spectrum of acidic species (such as SO42-, PO3-, SiO32-), proficient in capturing alkali/alkaline earth metal effectively, elements such as S, P, and Si formed bonds with K, Na, Ca, and Mg. The synergistic protection of the active sites and the surface elements avoided the deactivation of the catalyst. The detrimental effects of high concentrations of alkali and alkaline earth metals were primarily due to promoting an excessively high valence state of Mn on the catalyst surface and the reduction or loss of NH3 adsorption and activation at Brønsted acid sites. This research provided valuable insights for advancing the development of low-temperature denitration catalysts with improved resistance to alkali and alkaline earth metal poisoning.

Study on the adsorption performance of carbon-magnetic modified sepiolite nanocomposite for Sb(V), Cd(II), Pb(II), and Zn(II): Optimal conditions, mechanisms, and practical applications in mining areas

A carbon-magnetic modified sepiolite nanocomposite (γ-Fe2O3/SiO2-Mg(OH)2@BC) was synthesized using a hydrothermal method, consisting of γ-Fe2O3, activated sludge biochar (BC), and alkali-modified sepiolite. Its ability to remove heavy metals such as Sb(V), Pb(II), Cd(II), and Zn(II) was investigated through adsorption experiments. Using response surface optimization, the optimal adsorption conditions were determined: adsorption time = 3.78 h, pH = 2.63, initial concentration = 15.78 mg/L, temperature = 35.14°C, and adsorbent dosage = 100.71 mg. Characterization results revealed that the main adsorption mechanisms included complexation, π-π interactions, and electrostatic attraction. Kinetic and isotherm model analyses indicated that the adsorption process of γ-Fe2O3/SiO2-Mg(OH)2@BC adhered to the pseudo-second-order kinetic model and the Freundlich isotherm model, primarily involving multilayer chemical adsorption. The application of this composite material in complex aquatic environments in antimony mining areas demonstrated promising practical results, as well as excellent regeneration performance. This study provides technical and theoretical support for the treatment of complex heavy metal wastewater in antimony mining areas and lays a foundation for the development of novel carbon-magnetic modified nanocomposite adsorbents.

Field determination of trace concentrations of hazardous metals in waters by portable EDXRF

A new effective method has been developed for field determination of trace concentrations of cadmium, arsenic, zinc, copper, nickel, chromium, and lead in waters (e.g., surface and wastewater) using an energy dispersive X-ray fluorescence (EDXRF) analyzer. Trace concentrations cannot be determined by EDXRF without preconcentration. Agar was used for the preconcentration of these potentially toxic elements (PTE). Metals are trapped in the three-dimensional network of agar gel. Subsequent swelling of the gel leads to more effective preconcentration. The swollen gels with PTE were analyzed by a portable energy dispersive X-ray fluorescence analyzer Delta Professional X (pXRF). The preconcentration factors for each PTE were determined. With pXRF, the detection limits were 7, 5, 6, 7, 9, 47, and 22 µg/L for Cr, Ni, Cu, Zn, As, Cd, and Pb, respectively. A reference material was used to assess the methodology performance, and it has a very good agreement. The optimized and verified methodology was tested in practice at the special chemical unit of the Fire Rescue Service of the Czech Republic. PTE were determined by pXRF in a mobile chemical laboratory in field analysis. The measured values were compared with those determined via inductively coupled plasma mass spectrometry (ICP-MS) and were in good agreement. Our method was applied to real wastewater samples collected during after a fire of accumulation batteries of domestic photovoltaic power plants, allowing accurate real-time estimation of PTE concentrations. Obtaining reliable data during an ecological accident has a very important role in minimizing the subsequent environmental impact of the accident.

Acetate anions intercalated Fe/Mg-layered double hydroxides modified biochar for efficient adsorption of anionic and cationic heavy metal ions from polluted water

The simultaneous removal of anionic and cationic heavy metals presents a challenge for adsorbents. In this study, acetate (Ac-) was utilized as the intercalating anion for layered double hydroxide (LDH) to prepare a novel biochar composite adsorbent (Ac-LB) designed for the adsorption of Pb(II), Cu(II), and As(V). By utilizing Ac- as the intercalating anion, the interlayer space of the LDH was enlarged from 0.803 nm to 0.869 nm, exposing more adsorption sites for the LDH and enhancing the affinity for heavy metals. The results of the adsorption experiments showed that the adsorption effect of Ac-LB on heavy metals was significantly improved compared to the original FeMg-LDH modified biochar composites (LB), and the maximum adsorption capacity of Pb(II), Cu(II), and As(V) were 402.70, 68.50, and 21.68 mg/g, respectively. Wastewater simulation tests further confirmed the promising application of Ac-LB for heavy metal adsorption. The analysis of the adsorption mechanism revealed that surface complexation, electrostatic adsorption, and chemical deposition were the main mechanisms of action between heavy metals (Pb(II) and Cu(II)) and Ac-LB. Additionally, Cu(II) ions underwent a homogeneous substitution reaction with Ac-LB. The adsorption process of As(V) by Ac-LB mainly relied on complexation and ion-exchange reactions. Lastly, the modification of the LDH structure by Ac- as an intercalating anion, thereby increasing the affinity for heavy metals, was further illustrated using density-functional theory (DFT) calculations.

Efficient removal of Zn(II) ions from aqueous media using a facilely synthesized nanocomposite based on chitosan Schiff base

The development of nanomaterials incorporating organic components holds significant importance in addressing the efficient removal of metal ions through adsorption. Hence, in this study, a novel MnFe2O4/chitosan/Schiff base nanocomposite was successfully synthesized by crosslinking MnFe2O4 nanoparticles with functionalized chitosan using a novel Schiff base. The Schiff base was created through the condensation reaction between 2-aminophenol and terephthalaldehyde. Comprehensive characterization of the synthesized nanocomposite was performed through FT-IR, XRD, SEM, and VSM analyses, revealing a less crystalline arrangement compared to pure chitosan, a rough and non-uniform surface morphology, and a reduced magnetization value of 30 emu/g. Furthermore, the synthesized MnFe2O4/chitosan/Schiff base nanocomposite was working as an adsorbent for the effective disposal of Zn(II) ions from aqueous solutions. The synthesized nanocomposite exhibited a maximum sorption capacity of 289.86 mg/g for Zn(II) ions. Additionally, the results indicated that the removal of Zn(II) ions by the synthesized nanocomposite was a spontaneous, chemical, and endothermic process, aligning well with the Langmuir isotherm as well as the pseudo-second-order model. Furthermore, at pH 7.5, with a contact duration of 100 min and a temperature of 328 K, the fabricated nanocomposite reached its maximum sorption capacity for Zn(II) ions. The results of this study demonstrate the effectiveness of the newly synthesized MnFe2O4/chitosan/Schiff base nanocomposite in removing Zn(II) ions from aqueous media. The novel synthesis approach and the high adsorption capacity of 289.86 mg/g underscore the potential of this composite for practical applications in industrial wastewater treatment. The dual removal mechanism involving electrostatic attraction and complexation processes further enhances its utility, making it a valuable contribution to the field of environmental remediation.

Preparation of magnetic DTPA-modified chitosan composite microspheres for enhanced adsorption of Pb(II) from aqueous solution

In this study, magnetic DTPA-modified chitosan composite microspheres (MDCM) were prepared by reverse emulsion-double crosslinking method (carbodiimide followed by glutaraldehyde) for removal of Pb(II) from aqueous solution. The obtained magnetic adsorbents were characterized by FTIR, SEM, XRD, VSM, BET, and 13C NMR. The effects of the pH, contact time, initial concentration, and competitive metal cations (Na(I), Ca(II), or Mg(II)) on Pb(II) adsorption were investigated. The results revealed that MDCM exhibited high removal performance over a wide pH range and in the presence of competitive metal cations. The maximum adsorption capacity of MDCM for Pb(II) is 214.63 mg g-1 at pH 3, which is higher than most recently reported magnetic adsorbents. Adsorption kinetics and isotherms can be described by the pseudo-second-order model and Langmuir model, respectively. In addition, MDCM is easy to regenerate and can be reused five cycles with high adsorption capacity. Finally, the adsorption mechanism was further revealed by FTIR and XPS analysis. Overall, MDCM has practical application potential in removing Pb(II) from contaminated wastewater due to its high adsorption efficiency, good reusability, and convenient magnetic separation.

Nanotechnology Approaches for the Remediation of Agricultural Polluted Soils

Soil pollution from various anthropogenic and natural activities poses a significant threat to the environment and human health. This study explored the sources and types of soil pollution and emphasized the need for innovative remediation approaches. Nanotechnology, including the use of nanoparticles, is a promising approach for remediation. Diverse types of nanomaterials, including nanobiosorbents and nanobiosurfactants, have shown great potential in soil remediation processes. Nanotechnology approaches to soil pollution remediation are multifaceted. Reduction reactions and immobilization techniques demonstrate the versatility of nanomaterials in mitigating soil pollution. Nanomicrobial-based bioremediation further enhances the efficiency of pollutant degradation in agricultural soils. A literature-based screening was conducted using different search engines, including PubMed, Web of Science, and Google Scholar, from 2010 to 2023. Keywords such as "soil pollution, nanotechnology, nanoremediation, heavy metal remediation, soil remediation" and combinations of these were used. The remediation of heavy metals using nanotechnology has demonstrated promising results and offers an eco-friendly and sustainable solution to address this critical issue. Nanobioremediation is a robust strategy for combatting organic contamination in soils, including pesticides and herbicides. The use of nanophytoremediation, in which nanomaterials assist plants in extracting and detoxifying pollutants, represents a cutting-edge and environmentally friendly approach for tackling soil pollution.

Utilization of biochar for remediation of heavy metals in aqueous environments: A review and bibliometric analysis

Biochar usage for removing heavy metals from aqueous environments has emerged as a promising research area with significant environmental and economic benefits. Using the PICO approach, the research question aimed to explore using biochar to remove heavy metals from aqueous media. We merged the data from Scopus and the Web of Science Core Collection databases to acquire a comprehensive perspective of the subject. The PRISMA guidelines were applied to establish the search parameters, identify the appropriate articles, and collect the bibliographic information from the publications between 2010 and 2022. The bibliometric analysis showed that biochar-based heavy metal remediation is a research field with increasing scholarly attention. The removal of Cr(VI), Pb(II), Cd(II), and Cu(II) was the most studied among the heavy metals. We identified five main clusters centered on adsorption, water treatment, adsorption models, analytical techniques, and hydrothermal carbonization by performing keyword co-occurrence analysis. Trending topics include biochar reusability, modification, acid mine drainage (AMD), wastewater treatment, and hydrochar. The reutilization of heavy metal-loaded spent biochar includes transforming it into electrodes for supercapacitors or stable catalyst materials. This study provides a comprehensive overview of biochar-based heavy metal remediation in aquatic environments and highlights knowledge gaps and future research directions.

Adsorption of contaminants by nanomaterials synthesized by green and conventional routes: a critical review

Nanomaterials, due to their large surface area and selectivity, have stood out as an alternative for the adsorption of contaminants from water and effluents. Synthesized from green or traditional protocols, the main advantages and disadvantages of green nanomaterials are the elimination of the use of toxic chemicals and difficulty of reproducing the preparation of nanomaterials, respectively, while traditional nanomaterials have the main advantage of being able to prepare nanomaterials with well-defined morphological properties and the disadvantage of using potentially toxic chemicals. Thus, based on the particularities of green and conventional nanomaterials, this review aims to fill a gap in the literature on the comparison of the synthesis, morphology, and application of these nanomaterials in the adsorption of contaminants in water. Focusing on the adsorption of heavy metals, pesticides, pharmaceuticals, dyes, polyaromatic hydrocarbons, and phenol derivatives in water, for the first time, a review article explored and compared how chemical and morphological changes in nanoadsorbents synthesized by green and conventional protocols affect performance in the adsorption of contaminants in water. Despite advances in the area, there is still a lack of review articles on the topic.

Biodegradable chitosan‑zirconium composite adsorptive membranes for potential arsenic (III/V) capture electrodialysis

Combining adsorption with other technologies holds great potential in fast and deep arsenic ion removal. Herein, chitosan‑zirconium composite adsorptive membranes (CS-Zr CM) were successfully prepared using simple casting and sodium hydroxide coagulation strategies, which was demonstrated the use in arsenic ion-capture electrodialysis based on their good adsorption performance. In the batch adsorption tests, the maximum adsorption capacities of CS-Zr CM for As(III) and As(V) were 134.2 mg/g and 119.5 mg/g, respectively. CS-Zr CM also exhibited satisfying adsorption selectivity and good reusability toward As(III) and As(V). However, the adsorption kinetics showed that they needed 48 h to reach the adsorption equilibrium and the adsorption ability toward trace arsenic ion was ineffective. Furthermore, CS-Zr CM was applied as the adsorptive membrane in the electrodialysis process. Under the influence of electric field, the As(III) and As(V) removal equilibrium time was shortened to 12 h and the concentrations of As(III) and As(V) ions could be efficiently reduced to below the WHO limit in drinking water (10 μg/L), which far surpassed the physicochemical adsorption method. Such good arsenic ion removal ability of CS-Zr CM together with the ease scalable fabrication, low cost, and biodegradable properties shows its huge prospects in arsenic-containing wastewater treatment.

Chloride converts lead slag into a bifunctional material to remove heavy metals

Efficient and safe removal of arsenic and lead from industrial wastewater is essential for ecological protection. In this study, we developed a novel method using lead slag as a purifying agent and sodium chloride as a reinforcing agent to remove arsenic and lead from industrial wastewater. Through a combination of experiments and simulations, we elucidated the mechanisms involved in this reaction. The initial concentrations of As and Pb ions in the industrial wastewater were 4333 and 188 mg/L, respectively. After the reaction at 25 °C and a pH ranging from 9.7 to 10, the concentrations of arsenic and lead were reduced to 4.9 mg/L and 0.008 mg/L, respectively, achieving a removal rate of 99.9%. Our experimental results demonstrated that Pb2+ and AsO43- ions released from the lead slag and industrial wastewater reacted with Cl- ions to form Pb5(AsO4)3Cl precipitates, thus effectively eliminating a significant amount of As and Pb species. Simulation studies indicated that Pb5(AsO4)3Cl exhibited exceptional stability below 400 °C and could be directly stored. Additionally, the lead slag, which is rich in silica, played a crucial role in removing and stabilizing As and Pb ions. Under alkaline conditions, silica encapsulated the As and Pb species, adhering to the surface of the Pb-As co-precipitates and forming dense, irregular, small particles with internal and external structures that impeded the efflux of As and Pb ions. This phenomenon was confirmed through scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The kinetics of As and Pb ion removal was consistent with the pseudo-second-order kinetic model, indicating that the removal process was primarily governed by chemical interactions. Lead slag exhibits significant potential and advantages in the removal of As and Pb. This innovative method offers an effective approach to address heavy metal contamination in industrial wastewater, thus contributing to ecological protection.

Evaluation of metal pollution related to human health risk in freshwater snail Viviparus contectus (Millet, 1813) as a potential bioindicator species in Lake Habitat (Turkey)

Freshwater mollusks are employed as bioindicators for the assessment of water quality in biomonitoring studies since the water quality of natural resources is crucial for humans. The freshwater snail species known as Viviparus contectus (Viviparidae: Gastropoda) is one that people eat. Here, the levels of heavy metals (Cd, Cr, Pb, As, Zn, and Cu) in water and V. contectus samples were determined. An Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES, Spectro Arcos, vertical plasma) was used for the analysing the heavy metal concentrations in water and freshwater snail samples. The results of the current investigation demonstrated that freshwater snails accumulated metals in their water and soft tissues in the following orders: Pb > Cr = Zn = Cu = Cd = As and Zn > Cu > Pb > Cd > As = Cr. Autumn was the time of year when higher amounts of heavy metals (As, Cr, Cu, Zn, and Hg) were found. Pb content in the freshwater snail samples was strongly impacted by seasonal fluctuations (P 0.05). For adults, the EDI (estimated daily intake) values were lower than the TDI (tolerable daily intake) values, and the HI (hazard index) values were below 1. Freshwater snail samples had Zn and Pb levels that were over the FAO/WHO, Turkish Food Codex, JECFA, and EC limit values. Except for Pb, the water study shows mean metal concentrations below the USEPA, Turkish Pollution Control Regulation, and World Health Organisation maximum allowed levels. Aquatic ecosystems were negatively impacted by anthropogenic activities overall, and this study can provide a helpful data set for investigations on metallic contamination in water bodies and biomonitoring in freshwater ecosystems.

Facile synthesis and characterization of Fe3O4/analcime nanocomposite for the efficient removal of Cu(II) and Cd(II) ions from aqueous media

In the water purification field, heavy metal pollution is a problem that causes severe risk aversion. This study aimed to examine the disposal of cadmium and copper ions from aqueous solutions by a novel Fe3O4/analcime nanocomposite. A field emission scanning electron microscope (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction were used to characterize the synthesized products. The FE-SEM images showed that the analcime and Fe3O4 samples consist of polyhedral and quasi-spherical shapes with average diameters of 923.28 and 28.57 nm, respectively. Besides, the Fe3O4/analcime nanocomposite consists of polyhedral and quasi-spherical shapes with average diameters of 1100.00 nm. The greatest uptake capability of the Fe3O4/analcime nanocomposite toward the copper and cadmium ions is 176.68 and 203.67 mg/g, respectively. The pseudo-second-order kinetic model and Langmuir equilibrium isotherm best describe the uptake of copper and cadmium ions using the Fe3O4/analcime nanocomposite. The uptake of copper and cadmium ions using the Fe3O4/analcime nanocomposite is exothermic and chemical in nature.

Facile synthesis and characterization of magnesium and manganese mixed oxides for the efficient removal of tartrazine dye from aqueous media

Nanomaterials are the most effective class of substances for use as adsorbents in wastewater treatment. Hence, the current study involves the facile and low-cost synthesis of MgMn₂O₄/Mn₂O₃ and MgMn₂O₄/Mn₂O₃/Mg₆MnO₈ as novel nanostructures from mixed solutions of Mg(ii) and Mn(ii) ions using the Pechini sol-gel method. After that, the remaining powder was calcined at 500, 700, and 900 °C for 3 h; the products were designated as G500, G700, and G900, respectively. The G500 sample consists of MgMn₂O₄ and Mn₂O₃, while the G700 and G900 samples consist of MgMn₂O₄, Mg₆MnO₈, and Mn₂O₃. The synthesized nanostructures were characterized using several tools, such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and N₂ adsorption/desorption analysis. The average crystallite size of the G500, G700, and G900 samples is 210.53, 95.27, and 83.43 nm, respectively. The SEM images showed that the G500 sample consists of square and rectangular bars with an average diameter of 3.18 μm. Also, the G700 and G900 samples consist of hexagonal, polyhedral, and irregular shapes with an average diameter of 1.12 and 0.54 μm, respectively. The synthesized nanostructures were further utilized as adsorbents for the efficient removal of tartrazine dye from aqueous media. The experimental data showed a good fit with the Langmuir isotherm and pseudo-first-order model. The maximum adsorption capacities of the G500, G700, and G900 adsorbents toward tartrazine dye are 328.95, 359.71, and 395.26 mg g^-1, respectively.

A magnetic MIL-125-NH2@chitosan composite as a separable adsorbent for the removal of Cr(VI) from wastewater

Metal-organic frameworks (MOFs) are gradually used since of their huge specific surface area and superior pore structure. However, there are problems such as easy aggregation and difficult separation in water treatment. In this study, we prepared composite microspheres (FMCS-1) by modifying MIL-125-NH₂ with Fe₃O₄ and chitosan. The structural characterization and performance analysis of the materials showed that the introduction of chitosan effectively prevents the stacking of MOFs. The magnetic test manifested that Fe₃O₄ solved the problem of the difficult separation of MOFs from water. The removal potential of toxic Cr(VI) was tested by adsorption experiments. The isotherm model indicated that FMCS-1 is a single molecular layer adsorbent with a maximum adsorption capacity of 109.46 mg/g at pH = 2. The adsorption kinetics showed that the adsorption of Cr(VI) by FMCS-1 was chemical adsorption. The acid resistance test demonstrated that FMCS-1 can exist stably in acid solutions. The recycling experiments proved that the adsorbent can be reused and the removal percentage still reaches 50 % after 5 cycles. This work expands the application of MOFs in water treatment and also provides an effective adsorbent for Cr(VI) removal.