Self-forming electroactive dynamic membrane for enhancing the decolorization of methyl orange by weak electrical stimulation

A novel Anaerobic Cathodic Dynamic Membrane Bioreactor (AnCDMBR) for efficient mitigating fouling and recovering bioenergy from municipal wastewater

Concerns regarding membrane fouling and suboptimal bioenergy recovery have constrained the implementation of anaerobic membrane bioreactor (AnMBR) for treating low-strength municipal wastewater. This study presents a novel anaerobic cathodic dynamic membrane bioreactor (AnCDMBR) designed to address these challenges. A self-formed cathodic dynamic membrane (CDM) on inexpensive carbon cloth was developed to function as both a membrane and biocathode to achieve dual-function effects of mitigating membrane fouling and accelerating organics conversion. Compared with common dynamic membrane (1.52 kPa/d) and commercial membranes (7.52 kPa/d), the developed CDM presented a significantly reduced fouling rate (1.02 kPa/d), exhibiting the potential as a substitute for high-cost conductive membranes. Furthermore, efficient and stable biomethanation occurred in AnCDMBR with a superior methane yield rate of 0.26 L-CH4/g-COD (CH4 content > 95 %), which was 1.42 times higher than the control, linked to the higher activities of microbial metabolism and methanogenic-related key enzymes. Further analysis revealed that electrostimulation-induced niche differentiation of microbiota regulated interspecies interactions between electroactive microorganisms and complex anaerobic digestion microbiomes, facilitating organic matter conversion to methane and leading to superior bioenergy recovery. This study offered a new strategy for effectively mitigating fouling and recovering bioenergy from low-strength wastewater, potentially expanding the application of AnMBRs.

Dynamic membrane filtration accelerates electroactive biofilms in bioelectrochemical systems

Bioelectrochemical systems (BES) have emerged as a dual-function technology for treating wastewater and recovering energy. A vital element of BES is the rapid formation and maintenance of electroactive biofilms (EABs). Previous attempts to accelerate EAB formation and improve electroactivities focused on enhancing the bacterial adhesion process while neglecting the rate-limiting step of the bacterial transport process. Here, we introduce membrane filtration into BES, establishing a dynamic membrane filtration system that enhances overall performance. We observed that optimal membrane flux considerably reduced the startup time for EAB formation. Specifically, EABs established under a 25 L m-2 h-1 flux (EAB25 LMH) had a formation time of 43.8 ± 1.3 h, notably faster than the 51.4 ± 1.6 h in the static state (EAB0 LMH). Additionally, EAB25 LMH exhibited a significant increase in maximum current density, approximately 2.2 times higher than EAB0 LMH. Pearson correlation analysis indicated a positive relationship between current densities and biomass quantities and an inverse correlation with startup time. Microbial analysis revealed two critical findings: (i) variations in maximum current densities across different filtration conditions were associated with redox-active substances and biomass accumulation, and (ii) the incorporation of a filtration process in EAB formation enhanced the proportion of viable cells and encouraged a more diverse range of electroactive bacteria. Moreover, the novel electroactive membrane demonstrated sustained current production and effective solid-liquid separation during prolonged operation, indicating its potential as a viable alternative in membrane-based systems. This approach not only provides a new operational model for BES but also holds promise for expanding its application in future wastewater treatment solutions.

Catalytic degradation of crystal violet and methyl orange in heterogeneous Fenton-like processes

Metals-loaded (Fe3+, Cu2+ and Zn2+) activated carbons (M@AC) with different loading ratios (0.1%, 0.5%, 1%, 5% and 10%) were prepared and employed for catalytic degradation of dye model compounds (crystal violet (CV) and methyl orange (MO)) in wastewater by heterogeneous Fenton-like technique. Compared with Cu@AC and Zn@AC, 0.5% Fe3+ loaded AC (0.5Fe@AC) had better catalytic activity for dyes degradation. The effects of dyes initial concentration, catalyst dosage, pH and hydrogen peroxide (H2O2) volume on the catalytic degradation process were investigated. Cyclic performance, stability of 0.5Fe@AC and iron leaching were explored. Degradation kinetics were well fitted to the pseudo-second-order model (Langmuir-Hinshelwood). Almost complete decolorization (99.7%) of 400 mg L-1 CV was achieved after 30 min reaction under the conditions of CV volume (30 mL), catalyst dosage (0.05 g), H2O2 volume (1 mL) and pH (7.7). Decolorization of MO reached 98.2% under the same conditions. The abilities of pyrolysis char (PC) of dyeing sludge (DS) and metal loaded carbon to remove dye pollutants were compared. The intermediate products were analyzed and the possible degradation pathway was proposed. This study provided an insight into catalytic degradation of triphenylmethane- and aromatic azo-based substances, and utilization of sludge char.