Personal protective equipment-derived pollution during Covid-19 era: A critical review of ecotoxicology impacts, intervention strategies, and future challenges

Time dependent release of microplastics from disposable face masks poses cyto-genotoxic risks in Allium cepa

The use of disposable face masks (DFMs) increased during the COVID-19 pandemic and has become a threat to the environment due to the release of microplastics (MPs). Although many reports have characterized and explored the release of MPs from DFMs and their effects in aquatic ecosystems, there is a lack of investigation into the effects in terrestrial plants. This report aims to fill this research gap by characterizing whole mask leachates (WMLs) collected at different time points and examining their toxicity on Allium cepa, a terrestrial model plant. Various analytical techniques including FE-SEM, FT-IR, and Raman spectroscopy were used to identify MPs in WMLs. The MPs are composed of polypropylene mostly and the concentration of smaller-sized MPs increased with leachate release time. The WMLs showed a MP concentration-dependent cytogenotoxic effect (72 %, 50 %, and 31 %, on 1, 5, and 11-day WMLs, respectively) on A. cepa root cells due to elevated oxidative stress (19 %, 45 %, and 70 %, on 1, 5, and 11-day WMLs, respectively). Heavy metal content of the WMLs was negligible and, thus, not a significant contributor to toxicity in the plant. Overall, this report highlights the fate of DFMs in the environment and their biological impacts in a model plant.

Review on personal protective equipment: Emerging concerns in micro(nano)plastic pollution and strategies for addressing environmental challenges

The COVID-19 pandemic was caused by the SARS-CoV-2 virus, marking one of the most catastrophic global health crises of the 21st century. Throughout this period, widespread use and improper disposal of personal protective equipment (PPE) emerged as a pressing environmental issue, significantly impacting various life forms. During the COVID-19 pandemic, there was a high rate of PEP disposal. An alarming 1.6 × 106 tons of plastic waste each day has been generated since the onset of the outbreak, predominantly from the inadequate disposal of PPE. The mismanagement and subsequent degradation of discarded PPE significantly contribute to increased non-biodegradable micro(nano)plastic (MNP) waste. This pollution has had profound adverse effects on terrestrial, marine, and aquatic ecosystems, which have been extensively of concern recently. Accumulated MNPs within aquatic organisms could serve as a potential route for human exposure when consuming seafood. This review presents a novel aspect concerning the pollution caused by MNPs, particularly remarking on their role during the pandemic and their detrimental effects on human health. These microplastic particles, through the process of fragmentation, transform into nanoparticles, persisting in the environment and posing potential hazards. The prevalence of MNP from PPE, notably masks, raises concerns about their plausible health risks, warranting global attention and comprehensive exploration. Conducting a comprehensive evaluation of the long-term effects of these processes and implementing effective management strategies is essential.

Effects of COVID-19 on coastal and marine environments: Aggravated microplastic pollution, improved air quality, and future perspective

The COVID-19 pandemic during 2020-2023 has wrought adverse impacts on coastal and marine environments. This study conducts a comprehensive review of the collateral effects of COVID-19 on these ecosystems through literature review and bibliometric analysis. According to the output and citation analysis of these publications, researchers from the coastal countries in Asia, Europe, and America payed more attentions to this environmental issue than other continents. Specifically, India, China, and USA were the top three countries in the publications, with the proportion of 19.55%, 18.99%, and 12.01%, respectively. The COVID-19 pandemic significantly aggravated the plastic and microplastic pollution in coastal and marine environments by explosive production and unproper management of personal protective equipment (PPE). During the pandemic, the estimated mismanaged PPE waste ranged from 16.50 t/yr in Sweden to 250,371.39 t/yr in Indonesia. In addition, the PPE density ranged from 1.13 × 10-5 item/m2 to 2.79 item/m2 in the coastal regions worldwide, showing significant geographical variations. Besides, the emerging contaminants released from PPE into the coastal and marine environments cannot be neglected. The positive influence was that the COVID-19 lockdown worldwide reduced the release of air pollutants (e.g., fine particulate matter, NO2, CO, and SO2) and improved the air quality. The study also analyzed the relationships between sustainable development goals (SDGs) and the publications and revealed the dynamic changes of SDGs in different periods the COVID-19 pandemic. In conclusion, the air was cleaner due to the lockdown, but the coastal and marine contamination of plastic, microplastic, and emerging contaminants got worse during the COVID-19 pandemic. Last but not least, the study proposed four strategies to deal with the coastal and marine pollution caused by COVID-19, which were regular marine monitoring, performance of risk assessment, effective regulation of plastic wastes, and close international cooperation.

Disposable surgical/medical face masks and filtering face pieces: Source of microplastics and chemical additives in the environment

The production and consumption of disposable face masks (DFMs) increased intensely during the COVID-19 pandemic, leading to a high amount of them being found in the terrestrial and aquatic environment. The main goal of this research study is to conduct a comparative evaluation of the water-leachability of microplastics (MPs) and chemical additives from various types of disposable surgical/medical face masks (MM DFMs) and filtering face pieces (FFPs). Fourier-Transform Infrared Spectroscopy was used for MPs analysis. Liquid Chromatography/High Resolution Mass Spectrometry was used to analyse analytes presented in the water-leachates of DFMs. FFPs released 3-4 times more microplastic particles compared to MM DFMs. The release of MPs into water from all tested DFMs without mechanical stress suggests potential MP contamination originating from the DFM production process. Our study for the first time identified bisphenol B (0.25-0.42 μg/L) and 1,4-bis(2-ethylhexyl) sulfosuccinate (163.9-115.0 μg/L) as leachables from MM DFMs. MPs in the water-leachates vary in size, with predominant particles <100 μm, and the release order from DFMs is MMIIR > MMII > FFP3>FFP2>MMI. The main type of microplastics identified in the water leachates of the investigated face masks was polypropylene, accounting for 93-97% for MM DFMs and 82-83% for FFPs. Other polymers such as polyethylene, polycarbonate, polyester/polyethylene terephthalate, polyamide/Nylon, polyvinylchloride, and ethylene-propylene copolymer were also identified, but in smaller amounts. FFPs released a wider variety and a higher percentage (17-18%) of other polymers compared to MM DFMs (3-7%). Fragments and fibres were identified in all water-leachate samples, and fragments, particularly debris of polypropylene fibres, were the most common MP morphotype. The findings in this study are important in contributing additional data to develop science-based policy recommendations on the health and environmental impacts of MPs and associated chemical additives originated from DFMs.

Non-negligible vector effect of micro(nano)plastics on tris(1,3-dichloro-2-propyl) phosphate in zebrafish quantified by toxicokinetic model

Micro(nano)plastics (MNPs) inevitably interact with coexisting contaminants and can act as vectors to affect their fate in organisms. However, the quantitative contribution of MNPs in the in vivo bioaccumulation and distribution of their coexisting contaminants remains unclear. Here, by selecting tris(1,3-dichloro-2-propyl) phosphate (TDCIPP) as the typical coexisting contaminant, we quantified the contribution of MNPs to bioaccumulation and distribution of TDCIPP with toxicokinetic models. Results indicated that MNPs differentially facilitated TDCIPP bioaccumulation and distribution, and NPs slowed down TDCIPP depuration more significantly than MPs. Model analysis further revealed increasing contributions of MNPs to whole-fish TDCIPP bioaccumulation over time, with NPs (33-42%) contributing more than MPs (12-32%) at 48 h exposure. NPs contributed more than MPs to TDCIPP distribution in the liver (13-19% for MPs; 36-52% for NPs) and carcass (24-45% for MPs; 57-71% for NPs). The size-dependent vector effect might be attributed to the fact that MNPs promote contaminant transfer by damaging biofilm structure and increasing tissue membrane permeability, with NPs exerting stronger effects. This work demonstrated the effectiveness of using modeling tools to understand the relative importance of MNPs as contaminant vectors in the TK process and highlighted the higher contaminant transfer potential of NPs under combined exposure scenarios.

A review of microplastic threat mitigation in Asian lentic environments

Microplastic (MP) pollution has evolved into a significant worldwide environmental concern due to its widespread sources, enduring presence, and adverse effects on lentic ecosystems and human well-being. The growing awareness of the hidden threat posed by MPs in lentic ecosystems has emphasized the need for more in-depth research. Unlike marine environments, there remain unanswered questions about MP hotspots, ecotoxic effects, transport mechanisms, and fragmentation in lentic ecosystems. The introduction of MPs represents a novel threat to long-term environmental health, posing unresolved challenges for sustainable management. While MP pollution in lentic ecosystems has garnered global attention due to its ecotoxicity, our understanding of MP hotspots in lakes from an Asian perspective remains limited. Hence, the aim of this review is to provide a comprehensive analysis of MP hotspots, morphological attributes, ecotoxic impacts, sustainable solutions, and future challenges across Asia. The review summarizes the methods employed in previous studies and the techniques for sampling and analyzing microplastics in lake water and sediment. Notably, most studies concerning lake microplastics tend to follow the order of China > India > Pakistan > Nepal > Turkey > Bangladesh. Additionally, this review critically addresses the analysis of microplastics in lake water and sediment, shedding light on the prevalent net-based sampling methods. Ultimately, this study emphasizes the existing research gaps and suggests new research directions, taking into account recent advancements in the study of microplastics in lentic environments. In conclusion, the review advocates for sustainable interventions to mitigate MP pollution in the future, highlighting the presence of MPs in Asian lakes, water, and sediment, and their potential ecotoxicological repercussions on both the environment and human health.

An adaptive ensemble deep learning framework for reliable detection of pandemic patients

Nurses, often considered the backbone of global health services, are disproportionately vulnerable to COVID-19 due to their front-line roles. They conduct essential patient tests, including blood pressure, temperature, and complete blood counts. The pandemic-induced loss of nursing staff has resulted in critical shortages. To address this, robotic solutions offer promising avenues. To solve this problem, we developed an ensemble deep learning (DL) model that uses seven different models to detect patients. Detected images are then used as input for the soft robot, which performs basic assessment tests. In this study, we introduce a deep learning-based approach for nursing soft robots, and propose a novel deep learning model named Deep Ensemble of Adaptive Architectures. Our method is twofold: firstly, an ensemble deep learning technique detects COVID-19 patients; secondly, a soft robot performs basic assessment tests on the identified patients. We evaluate the performance of various deep learning-based object detectors for patient detection, examining implementations of You Only Look Once (YOLO), Single Shot MultiBox Detector (SSD), Region-Based Convolutional Neural Network (RCNN), and Region-Based Fully Convolutional Network (R-FCN) on a proprietary dataset comprising 32,668 hospital surveillance images. Our results indicate that while YOLO and VGG facilitate rapid detection, Faster-RCNN (Inception ResNet-v2) and our proposed Ensemble-DL achieve the highest accuracy. Ensemble-DL offers accurate results in a reasonable timeframe, making it apt for patient detection on embedded platforms. Through real-world experiments, our method outperforms baseline approaches (including Faster-RCNN, R-FCN variants, CNN+LSTM, etc.) in terms of both precision and recall. Achieving an impressive accuracy of 98.32%, our deep learning-based model for nursing soft robots presents a significant advancement in the identification and assessment of COVID-19 patients, ultimately enhancing healthcare efficiency and patient care.

A review on sterilization methods of environmental decontamination to prevent the coronavirus SARS-CoV-2 (COVID-19 virus): A new challenge towards eco-friendly solutions

In recent years, the COVID-19 pandemic is currently wreaking havoc on the planet. SARS-CoV-2, the Severe Acute Respiratory Syndrome Coronavirus, is the current term for this outbreak. Reports about this novel coronavirus have been presented since the pandemic's breakout, and they have demonstrated that it transmits rapidly from person to person, primarily by droplets in the air. Findings have illustrated that SARS-CoV-2 can survive on surfaces from hours to days. Therefore, it is essential to find practical solutions to reduce the virus's impact on human health and the environment. This work evaluated common sterilization methods that can decontaminate the environment and items. The goal is that healthcare facilities, disease prevention organizations, and local communities can overcome the new challenge of finding eco-friendly solutions. Further, a foundation of information encompassing various sterilization procedures and highlighting their limits to choose the most appropriate method to stop disease-causing viruses in the new context has been presented. The findings of this crucial investigation contribute to gaining insight into the comprehensive sterilization approaches against the coronavirus for human health protection and sustainable environmental development.

Personalized Nasal Protective Devices: Importance and Perspectives

Nowadays, in addition to diseases caused by environmental pollution, the importance of personalized protection against various infectious agents has become of paramount importance. Besides medicine, several technical and technological studies have been carried out to develop suitable devices. One such revolutionary solution is the use of personalized nasal filters, which allow our body to defend itself more effectively against external environmental damage and pathogens. These filters are small devices that are placed in the nose and specifically filter the inhaled environmental contaminants, allergens, and microorganisms according to individual needs. These devices not only play a key role in maintaining our health but also contribute to environmental protection, reducing the inhalation of pollutants and their harmful impact on the natural environment. Another advantage of personalized filters is that they also provide an opportunity to strengthen our individual immune systems. The use of personalized filters allows medicine to provide optimized protection for everyone, focusing on individual genetic and immunological conditions. The momentum behind the development and research of personalized nasal filters has reached astonishing proportions today. Nowadays, many research groups and medical institutions are working to create new materials, nanotechnologies, and bioinformatics solutions in order to create even more effective personalized nasal filters that can also be shaped easily and safely. Considering the needs of the users is at least as important during development as the efficiency of the device. These two properties together determine the success of the product. Industry research focuses not only on improving the efficiency of devices, but also on making them more responsive to user needs, comfort, and portability. Based on all this, it can be concluded that personalized nasal filters can be a promising and innovative solution for protection against environmental pollutants and pathogens. Through a commitment to the research and development of technology, the long-term impact of such devices on our health and the environment can be significant, contributing to improving people's quality of life and creating a sustainable future. With unique solutions and continuous research, we give hope that in the future, despite the environmental challenges, we can enjoy the protection of our health with even more efficient and sophisticated devices.

Spatiotemporal distribution of microplastics in Miri coastal area, NW Borneo: inference from a periodical observation

The current study aims to investigate the spatiotemporal distribution of microplastics (MPs) in the Miri coast, targeting their occurrences, characterisation, and potential sources. For a periodical study, coastal sediments were collected from three different time intervals (monsoon, post-monsoon, and post-COVID) and subjected to stereomicroscope, ATR-FTIR, and SEM-EDX analyses. These results show a significant increase of MPs in post-COVID samples by approximately 218% and 148% comparatively with monsoon and post-monsoon samples, respectively. The highest concentration of MPs was detected near the river mouths and industrial areas where the waste discharge rate and anthropogenic activities dominate. Fibre-type MPs are the most abundant, with an average of nearly 64%, followed by fragments, films, microbeads, and foams. The most dominant polymer types were polytetrafluoroethylene (PTFE), polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyester (PET). Overall, the current study shows a better understanding of MPs occurrence and potential sources in the Miri coastal area.

Ecotoxicological significance of bio-corona formation on micro/nanoplastics in aquatic organisms

The unsustainable manufacturing, utilization and inadequate handling of plastics have led to a surge in global plastic pollution. In recent times, there has been increasing concern about the plausible hazards associated with exposure to micro/nanoplastics (M/NPs). As aquatic systems are considered to be the likely sink for M/NPs, it is crucial to comprehend their environmental behavior. The bioavailability, toxicity and fate of M/NPs in the environment are predominantly dictated by their surface characteristics. In the aquatic environment, M/NPs are prone to be internalized by aquatic organisms. This may facilitate their interaction with a diverse array of biomolecules within the organism, resulting in the formation of a biocorona (BC). The development of BC causes modifications in the physicochemical attributes of the M/NPs including changes to their size, stability, surface charge and other properties. This review details the concept of BC formation and its underlying mechanism. It provides insight on the analytical techniques employed for characterizing BC formation and addresses the associated challenges. Further, the eco-toxicological implications of M/NPs and the role of BC in modifying their potential toxicity on aquatic organisms is specified. The impact of BC formation on the fate and transport of M/NPs is discussed. A concise outlook on the future perspectives is also presented.