Evaluation of different root canal filling techniques in severely curved canals by micro-computed tomography

Effects of radiotherapy dose and application time on the load-to-failure values of teeth filled with different sealers

BACKGROUND

The materials used in root canal filling and radiotherapy (RT) application can affect the load-to-failure of the teeth. This study aimed to compare the load-to-failure of the teeth filled with AH Plus (AHP) or AH Plus bioceramic (AHPB) before or after 60 Gy- and 70 Gy-dose radiotherapy.

MATERIALS AND METHODS

One hundred and ten maxillary incisors were endodontically prepared up to ProTaper Next X4 instruments. The teeth were randomly divided into 5 main groups as: non-irradiated, root canal treatment (RCT) before 60 Gy radiotherapy, RCT before 70 Gy radiotherapy, RCT after 60 Gy radiotherapy, RCT after 70 Gy radiotherapy. These groups were divided into 2 subgroups for filling material: AHP ve AHPB. After filling and radiotherapy procedures, the teeth were fixed on the thermoplastic mask plane. The plane were placed in the middle of a rectangular prism shaped glass phantom, and irradiated via a linear accelerator device. The teeth were then embedded in cylindrical acrylic blocks and the force (N) that caused the fracture was recorded under the Universal testing device. Student t-test was used for statistical comparisons. Statistical significance level was determined as p < 0.05.

RESULTS

After 70 Gy dose radiotherapy, the group filled with AHPB showed statistically significantly lower fracture strength than the group filled with AHP (p < 0.05). In the control group, before 60 Gy RT group, after 60 Gy RT group, and before 70 Gy RT group, the sealers had statistically significantly similar load-to-failure. (p > 0.05).

CONCLUSION

The group filled with AHPB caused a lower fracture strength than the group filled with AHP following a 70 Gy dose of RT. The sealers in the control group, before 60 Gy RT group, after 60 Gy RT group, and before 70 Gy RT group exhibited comparable load-to-failure values.

Evaluation of various obturation techniques with bioceramic sealers in 3D-printed C-shaped canals

This in vitro study compared various obturation techniques with bioceramic sealers for filling C-shaped 3D-printed replicas. A mandibular molar with a C-shaped root canal with a C1 configuration was obtained. After instrumenting with M3 Pro Gold files (United Dental, Shanghai, China) up to size #30/0.04, a CBCT scan of the tooth was taken. Sixty 3D-printed replicas of the tooth were created. The samples were obturated with EndoSeal TCS sealer (E. TCS; Maruchi, Wonju, Korea) or EndoSeal MTA (E. MTA; Maruchi, Wonju, Korea) (n = 30). The samples in each group were obturated with the following techniques (n = 10): (1) single-cone technique (SC), (2) SC with ultrasonic activation (UA), and (3) cold hydraulic compaction (CHC). Following incubation, the replicas' apical, middle, and coronal thirds were inspected under a digital microscope, and the proportion of filling material and void were calculated. Also, the obturation time and sealer extrusion were recorded. Data were analyzed using ANOVA, LSD post-hoc, and the chi-square tests (α = 0.05). The results indicated that in the apical third, E. TCS-SC, E. TCS-UA, and E. MTA-UA had the lowest void percentage among groups (p < 0.05). In the middle thirds, samples obturated with E. TCS-UA showed a significantly lower void percentage among all groups (p < 0.05). However, in the coronal third, E. TCS-CHC showed the least void percentage (p < 0.05), followed by E. TCS-UA and E. MTA-CHC. The E. TCS-SC and E. TCS-UA were the least time-consuming methods (p < 0.05). Sealer extrusion significantly differed among the groups, with E. MTA-UA and E. TCS-UA showing higher incidence (p = 0.019). It was concluded that E. TCS-UA was the most convenient obturation technique. However, care must be taken when obturating the canals with high flow and ultrasonic activation near the vital anatomical landmarks.

Effect of Obturation Techniques on the Quality of Root Canal Fillings: A Systematic Review and Meta-analysis of in Vitro Studies

Introduction

The current study aimed to compare the quality of root canal obturation performed with cold lateral condensation with other obturation techniques.

Materials and Methods

Diverse Search was conducted using six electronic/academic databases following PICOS (i.e. population, intervention, control, outcomes, and study design) strategy: (P) Extracted mature permanent teeth; (I) Obturation techniques except for cold lateral condensation; (C) Cold lateral condensation tyechnique; (O) Quality of root canal obturation; and (S) In vitro studies assessing parameters using micro-computed tomography. The statistical method used for the meta-analyses was the "inverse variance DerSimonian-Laird test". The heterogeneity data was calculated using the T2, Cochran Q test, and I2 statistics.

Results

Fifteen studies were included for the final analysis; one had a low risk of bias, eight a moderate risk, and six a high risk of bias. Ten studies were selected for meta-analyses; three studies comparing cold lateral condensation with carrier-based gutta-percha techniques [P=0.96; mean difference (MD)=-0.02; confidence interval (CI): (-0.77, 0.73); I2=21%]; three comparing cold lateral condensation with single-cone techniques [P=0.75; MD=-0.39; CI: (-2.77, 1.99); I2=92%]; two comparing cold lateral condensation and thermo-plasticized injectable techniques [P=0.37; MD=5.91; CI: (-7.13,18.94); I2=99%]; and five comparing cold lateral condensation with warm vertical condensation techniques [P<0.0001; MD=5.29; CI=(2.84, 7.74); I2=92%]. The overall effect reported significant results [P=0.0003; MD=2.69; CI=(1.23, 4.16); I2=96%]; favoring fewer voids and gaps for the other used obturation techniques.

Conclusions

Cold lateral condensation and single-cone techniques presented no statistical differences. Nonetheless, Warm vertical condensation technique had better results compared to cold lateral condensation.

Evaluation of the efficacy of rotary and reciprocating systems for the removal of filling material for various root canal filling techniques

Background

This study aimed to evaluate the efficacy of various filling and retreatment techniques for oval-shaped root canals.

Methods

Sixty distal roots of mandibular molar teeth were included in the study. The roots were prepared using the ProTaper Next (PTN) X4 rotary system and irrigation with 2.5% NaOCl. The roots were then divided into three groups and filled with Total Fill BC Sealer (FKG Dentaire) using three different techniques (n=20): single cone (SC), GuttaCore (GC), and warm vertical condensation (WVC). The retreatment procedure was performed using two different instrumentation techniques: Reciproc 50 (R50) and PTN X5 (n=10). To analyze the remaining filling material, the roots were divided buccolingually in two parts with the help of diamond separators, and photographs were taken at x16 magnification using a dental operating microscope (DOM). The ratio of the remaining filling materials was calculated using image analysis software and statistically evaluated using the Kruskal-Wallis test.

Results

None of the assessed retreatment procedures completely removed the filling materials from the root canals. For both instrumentation techniques, more root canal filling material remained in the WVC group (P<0.05).

Conclusion

The GC filling technique had a higher cleaning percentage than the WVC and SC techniques in the coronal region. The R50 system was found to be superior to the PTN X5 system for retreatment, and the root canal fillings applied using the WVC technique were more difficult to remove than the fillings applied using the other techniques.

Effect of the Modified Methacrylate-Based Root Canal Sealer in Single-Cone Technique

This study aimed to modify EndoREZ with 2.5% dimethylaminododecyl methacrylate (DMADDM) and 1% magnetic nanoparticles (MNP) to study its sealing property, penetration and long-term antibacterial and therapeutic effect in the single-cone technique (SCT) compared with EndoREZ and iRoot SP. Thirty single-root human maxillary premolars were assigned into three groups and obturated with three different root canal sealers by SCT. Every specimen was then scanned using micro-CT to analyze void fraction, and void volumes and confocal laser scanning microscope (CLSM) was used to study the dentin penetration. The long-term antimicrobial effects were tested in vitro before and after aging 1 and 4 weeks by the single-strain Enterococcus faecalis biofilm model. In addition, the beagle canine model of apical periodontitis (AP) was utilized to judge and compare the therapeutic effect of three sealers in SCT. The void fraction and void volumes of the modified root canal sealer were not significantly different from iRoot SP (p > 0.05) but were lower than EndoREZ (p < 0.05). The modified root canal sealant displayed a greater penetration, long-term antibacterial property, and treatment effect than the other groups (p < 0.05). This indicated that after being modified with DMADDM and MNP, it showed better performance in SCT.

A critical analysis of research methods and experimental models to study root canal fillings

Canal filling materials and techniques have been one of the most studied topics in Endodontics. A simple search using the mesh term "root canal filling" in PubMed revealed more than 11,000 articles, an impressive number that is much higher than "root canal disinfection" (5,544 articles) or even the popular "root canal preparation" (8,527 articles). The overriding importance attributed to root filling procedures is not merely intuitive. It derived from the appealing relevance given by the appearance of the white lines in common radiographs grounded on retrospective clinical data that had identified the quality of a root filling as one of the major causes of treatment failure (lack of healing). Since the publication of the Washington study, impressive efforts have been made for the release of new materials and techniques, as well as, for the development of a plethora of laboratory methods to assess the quality of root filling procedures. This narrative review aims to address and discuss the most relevant laboratory methods to assess the root canal filling. Since filling quality improvements have not translated into higher success rates, as reported in longitudinal clinical studies, more than to deliver a simple methodology-based review, this paper aims to present an in-depth critical view on the assessment of laboratory methods used to study the filling materials and techniques. Recent data indicate that the long-term dimensional stability/degradation over time of endodontic sealers plays a central role in the treatment outcome. In this context, laboratory methods should be developed focusing on predicting, at least to some degree, the long-term clinical behaviour of root canal fillings, rather than simply ranking different materials or techniques.

Physico-Chemical Properties of Calcium-Silicate vs. Resin Based Sealers-A Systematic Review and Meta-Analysis of Laboratory-Based Studies

INTRODUCTION

The aim of this systematic review is to analyse the effect of physico-chemical properties of calcium silicate-based sealers in comparison to epoxy resin sealers in permanent teeth using a single-cone obturation technique.

METHODS

The study was conducted according to the guidelines of Cochrane Handbook for Systematic Reviews of Interventions and Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) statement. Literature search was performed using the PubMed/MEDLINE, Cochrane Central Register of Controlled Trials, Web of Science, DOAJ, Open Gray with no language restrictions until October 2020. Two reviewers assessed the studies for eligibility. Grading of Recommendations, Assessment, Development, and Evaluations (GRADE) was carried out to assess the evidence. Meta-analysis of the pooled data with subgroups was performed using the RevMan software (p < 0.05).

RESULTS

Results from the 28 included studies showed that the mean difference in adaptation to root canal walls (marginal adaptation, interfacial gaps and void volume) for both sealers were non-significant. However, void volume values showed a significant mean difference (p < 0.00001) favouring the calcium silicate-based sealers. The pooled meta-analysis reported statistically significant differences for apical microleakage (p = 0.0007) whilst there were non-significant mean differences for fracture resistance (p = 0.09) and push-out bond strength (p = 0.63). The heterogeneity among the included studies was 97% (I²).

CONCLUSIONS

Within the limitations of this review, calcium silicate-based sealers demonstrated a similar or superior performance in comparison to resin-based sealers in terms of the physico-chemical properties.

Characterization of a clonal human periodontal ligament stem cell line exposed to methacrylate resin-, bioactive glass-, or silicon-based root canal sealers

The aim of this study was to characterize a clonal human periodontal ligament (PDL) stem cell line (line 2-23 cells) cultured with root canal sealers based on methacrylate resin (SuperBond sealer; SB), bioactive glass (Nishika Canal Sealer BG; BG), or silicon (GuttaFlow 2; GF). The sealers were set in rubber molds to form sealer discs. Line 2-23 cells were cultured with or without the discs for 3 days. The cell viability was evaluated by direct cell counting and MTT assay. Inflammation-, PDL-, collagen-, and cell cycle-related gene expression was investigated by real-time RT-PCR. Collagen production was analyzed by Picro Sirius Red staining. Calcium ion concentration in the culture was measured by a QuantiChrom calcium assay kit. Line 2-23 cells survived when cultured with GF discs, but decreased cell viability was observed with SB and BG discs. The expression of inflammation-related genes was higher in cells cultured with SB discs, and expression of PDL-related genes was lower in cells exposed to SB and BG discs. These discs also down-regulated collagen production in line 2-23 cells. BG discs increased calcium ion concentration in the culture medium. Cells exposed to GF discs exhibited the same inflammation-, PDL-, collagen-, and cell cycle-related gene expression and collagen production as untreated cells. These results suggested that the characteristics of line 2-23 cells cultured with GF discs was highly resemble to untreated cells throughout the 3 days of the culture model.

Evaluation of curved root canals filled with a new bioceramic sealer: A microcomputed tomographic study using images with different voxel sizes and segmentation methods

The aim of this study was to investigate the filling ability of a new premixed bioceramic sealer in comparison with an epoxy resin-based sealer in curved root canals using different segmentation methods and voxel sizes in micro-CT images. Twelve curved mesial roots of mandibular molars with two separated canals were selected. All root canals were prepared by using HyFlex EDM files size 25/.08 and filled by the single cone technique and Bio-C Sealer or AH Plus (n = 12). The samples were scanned by micro-CT at 5 μm. The images were analyzed at 5, 10, and 20 μm for the volumetric analysis of voids in filling. Visual image segmentation was performed by two examiners, and the automatic segmentation was accomplished for comparison. Radiopacity of the sealers was evaluated by radiographic analysis. Data were submitted to the two-way ANOVA and non-paired t tests at a significance level of 5%. AH Plus had the highest radiopacity (p < .05). Root canals filled with AH Plus or Bio-C had similar low percentage of voids (p > .05). There was no difference interobserver, which had similar results to those obtained with automatic segmentation for all voxel sizes evaluated (p > .05). Bio-C Sealer had appropriate filling ability. Visual and automatic segmentation can be applied to micro-CT images with voxel sizes from 5 to 20 μm to evaluate the filling of sealers with adequate radiopacity. Automatic segmentation should be used as a faster method.

Presence of voids after three obturation techniques in band-shaped isthmuses: a micro-computed tomography study

Background

The objective of the present micro-computed tomography (micro-CT) study was to assess the presence of voids in band-shaped isthmuses obturated using three different filling techniques.

Methods

Twenty-four artificial molar teeth with a band-shaped isthmus were allocated to three groups (n = 8) for obturation, according to the filling technique: single-cone (SC), continuous wave of condensation (CWC) or lateral condensation (LC). Obturation was performed with gutta-percha (GP) cones and iRoot SP (Innovative Bioceramix, Vancouver, Canada). Post-filling micro-CT scanning was performed. The percentage of filling materials and void volumes were calculated in the isthmus areas and data were analyzed using one-way ANOVA and Tukey tests.

Results

The mean percentage of void volumes and corresponding filling percentages in the isthmus areas after obturation in the SC groups was 22.98 % ± 1.19 %, 77.02 % ± 1.19 %; in the CWC groups 10.46 % ± 2.28 %, 89.54 % ± 2.28 %; and in the LC groups was 13.14 % ± 1.85 %, 86.86 % ± 1.85 %, respectively.

Conclusions

In band-shaped isthmus area, the obturation quality of CWC was superior to SC and LC techniques.

Main and Accessory Canal Filling Quality of a Premixed Calcium Silicate Endodontic Sealer According to Different Obturation Techniques

The present study aimed to investigate the effects of different obturation techniques on the main and accessory canal filling quality of a premixed calcium silicate endodontic sealer (Endoseal TCS). We also highlighted the validity of the methods used for evaluating the canal filling quality. Thirty single-rooted premolars were used for the main canal filling and 75 were used for accessory canal filling. The canals were instrumented and randomly divided into three groups according to the filling techniques: (1) single-cone technique (SC), (2) single-cone with ultrasonic activation (SU), and (3) warm vertical compaction (WV). Voids in relation to the root canal fillings were assessed using cross-section images from microcomputed tomography (μCT) scans or transversely sectioned tooth specimens (n = 10). After demineralization and clearing of the teeth, the incidence, number, and completeness of the accessory canal fillings were evaluated (n = 25). One-way analysis of variance (ANOVA) and Tukey's post hoc test was used for the evaluation of the voids in the main root canal and the incidence and number of filled accessory canals. Pearson's chi-squared (χ²) test was used for the evaluation of the filling completeness (α = 0.05). In the stereomicroscopic evaluation of the sectioned specimen, the SC group had significantly higher void occurrence than the other groups (p < 0.05), although there was no difference between groups in the μCT evaluation. However, there was no difference between the SU and WV. There was no difference between all the groups regarding the incidence, number, and completeness of the accessory canal fillings. When the premixed calcium silicate sealer is used with SC, the ultrasonic activation is recommended to obtain a better main canal filling quality. In contrast, the obturation techniques did not affect the accessory canal filling. We also recommend using the sectioning method when the void formation in the root canal filling materials is evaluated.