Separation and Purification of Penicillin G from fermentation broth by solvent sublation

Establishing aqueous two-phase flotation coupled with preparative high performance liquid chromatography and its application for the purification of astragalin from Flaveria bidentis

The strategy of aqueous two-phase flotation (ATPF) followed by preparative high performance liquid chromatography (prep-HPLC) was established and used for the separation of astragalin from Flaveria bidentis. In the ATPF, the effects of sublation solvent, solution pH, (NH4)2SO4 concentration in aqueous solution, cosolvent, N2 flow rate, flotation time and volumes of the PEG phase on the recovery of astragalin were investigated in detail, and the optimal conditions of ATPF were selected: 50 wt% PEG1000 ethanol solvent as the flotation solvent, pH 4, 350 g/L of (NH4)2SO4 concentration in 5 % ethanol aqueous phase, 40 mL/min of N2 flow rate, 30 min of flotation time, 10.0 mL of flotation solvent volume and twice. After ATPF enrichment, the flotation product was further purified by prep-HPLC. As determined by HPLC, the purity of astragalin was 98.8 %.

Green preparation of activated carbon from pomegranate peel coated with zero-valent iron nanoparticles (nZVI) and isotherm and kinetic studies of amoxicillin removal in water

In present research, the activated carbon was prepared by a green approach from pomegranate peel coated with zero-valent iron nanoparticles (AC-nZVI) and developed as adsorbent for the removal of amoxicillin from aqueous solution. The physicochemical properties of the AC-nZVI were investigated using XRD, FTIR, and FESEM techniques. The optimal values of the parameters for the best efficiency (97.9%) were amoxicillin concentration of 10 mg/L, adsorbent dose of 1.5 g/L, time of 30 min, and pH of 5, respectively. The adsorption equilibrium and kinetic data were fitted with the Langmuir monolayer isotherm model (qmax 40.282 mg/g, R² 0. 0.999) and pseudo-first order kinetics (R² 0.961). The reusability of the adsorbent also revealed that the adsorption efficiency decreased from 83.54 to 50.79% after five consecutive repetitions. Overall, taking into account the excellent efficiency, availability, environmental friendliness, and good regeneration, AC-nZVI can be introduced as a promising absorbent for amoxicillin from aquatic environments.

Hydrophobic Adsorption Followed by Desorption with Ethanol-Water for Recovery of Penicillin G from Fermentation Broth

The hydrophobic adsorption is an alternative to traditional organic solvent extraction for the recovery and purification of Penicillin G (PenG). However, there is a lack of information concerning the effect of process variables and technical feasibility while balancing product degradation. After assessing the integrity of PenG under different conditions, Amberlite XAD-4 was selected from among three different adsorbents. During the batch process using only 0.05 g_XAD-4/mL_medium, the adsorption yield increased from 36% at pH 6 to 44% at pH 4. More than 90% of the antibiotic was captured from the fermentation broth using 0.083 g_XAD-4/mL_medium in a 45 min batch performed at pH 4 and 4 °C. Moreover, there was no PenG degradation. The desorption conditions were evaluated, and 95% of the antibiotic could be recovered in only one batch using water-ethanol, which is an unexplored PenG desorption process. The results showed selective adsorption, indicating that the process can also be useful for purification purposes. Hydrophobic adsorption with ethanol desorption is efficient, scalable, and green and could be used in place of traditional methods or in extractive fermentation.

Simultaneous determination and toxicological assessment of penicillins in different water matrices

A multi-residue analysis method was developed for the determination of penicillins in wastewater of WWTP, surface water and groundwater in Spain. The procedure involves a solid phase extraction (SPE) and the subsequent analysis by liquid chromatography coupled to tandem mass spectrometry detection (LC-QqQ-MS/MS). The SPE processes were optimized by test of cartridges, sample pH and elution solvents. ENV+ cartridge was chosen for the extraction of penicillins from different environmental samples. The best conditions for the extraction efficiency of the targets were observed at sample pH 6, by eluting solvents of methanol and acetonitrile respectively. The method has been validated by calibration curve, corresponding regression coefficient, limit of quantification and recoveries. The results showed that the recoveries of more than 90% were presented in all the compounds, except AMOX and AMPI, which had special amino-group in the molecular structure different with others. The matrix effect was also considered in the experiment and it was concluded that different matrix effect could be found between three kinds of waters, and the low retention of AMOX and AMPI on the cartridges was attributed to the matrices interference. The real sample detection showed that the penicillins degraded fast and only AMOX appeared in the studied environmental samples. The results of toxicology test on two compounds (AMOX and AMPI) showed that bacteria V. fischeri was proved to be relatively insensitive to both targets. The decreasing order of toxicity in three environmental waters for AMOX and AMPI was: wastewater > groundwater > surface water.

The recent progress of solvent sublation

Solvent sublation is a kind of adsorptive bubble separation technique in which the surface-active (or hydrophobic) compounds in aqueous phase are adsorbed on the bubble surfaces of an ascending gas stream and then collected in an organic layer placed on top of the aqueous phase. The technique has many advantages, such as high separation efficiency, high concentration coefficient, low dosage of organic solvent, soft separation process, and simple operation. Thus, this technique has been widely applied in many fields. The present article reviews solvent sublation's theoretical research and some applications in the last 10 years, and gives the development trend in the future.