Improved microfiltration of prehydrolysis liquor of wood from dissolving pulp mill by flocculation treatments for hemicellulose recovery

Integrated preparation of functional lignin nanoparticles and levulinic acid directly from the pre-hydrolysis liquor of poplar wood

The pre-hydrolysis liquor (PHL) produced during pulp dissolution and biomass refining is mainly composed of hemicellulose and lignin, and it is a potential source for production of value-added materials and platform chemicals; however, their utilization has been a serious challenge. In this study, we proposed a green and simple strategy to simultaneously prepare size-controlled functional lignin nanoparticles (LNPs) and levulinic acid (LA) from PHL as the raw material. The as-prepared LNPs exhibited remarkable stability thanks to the presence of saccharides with abundant oxygen-containing groups and surface charges, which prevented aggregation and maintained long-term storage stability. Trace amounts of the LNPs (≤ 0.2 wt%) could stabilize various Pickering emulsions, even with oil-to-water ratios as high as 5:5 (v/v). Subsequently, the remaining PHL was directly used to produce LA without adding a catalyst; under optimal conditions (160 °C and 1 h), the yield of LA was 56.3 % based on the dry saccharide content in the raw PHL. More importantly, p-toluenesulfonic acid (p-TsOH), the only reactive reagent used during the entire preparation process, including the two preparation steps of the LNPs and LA, was reusable, and the recovery rate was >70 % after five cycles. Overall, this green and simple strategy effectively and comprehensively utilized the PHL and showed potential for producing biobased nanomaterials and platform chemicals.

A Novel and Effective Recyclable BiOCl/BiOBr Photocatalysis for Lignin Removal from Pre-Hydrolysis Liquor

The presence of lignin hampers the utilization of hemicelluloses in the pre-hydrolysis liquor (PHL) from the kraft-based dissolving pulp production process. In this paper, a novel process for removing lignin from PHL was proposed by effectively recycling catalysts of BiOCl/BiOBr. During the whole process, BiOCl and BiOBr were not only adsorbents for removing lignin, but also photocatalysts for degrading lignin. The results showed that BiOCl and BiOBr treatments caused 36.3% and 33.9% lignin removal, respectively, at the optimized conditions, and the losses of hemicellulose-derived saccharides (HDS) were both 0.1%. The catalysts could be regenerated by simple photocatalytic treatment and obtain considerable CO and CO2. After 15 h of illumination, 49.9 μmol CO and 553.0 μmol CO2 were produced by BiOCl, and 38.7 μmol CO and 484.3 μmol CO2 were produced by BiOBr. Therefore, both BiOCl and BiOBr exhibit excellent adsorption and photocatalytic properties for lignin removal from pre-hydrolysis.

Separation and purification of fatty acids by membrane technology: a critical review

Fatty acids (FAs) are a very important group of raw materials for chemical industry, and the technology of separating or purifying the FAs from the reaction product mixture has always been the hotspot of research. Membrane processes for separation of FAs are being increasingly reported. Compared with conventional FAs separation methods, membrane separation has the advantages of low energy consumption, system compactness, high separation efficiency, easy scale-up, high available surface area per unit volume and low working temperatures, thereby attracting considerable attention of many researchers. In this regards, this paper critically reviewed the developments of methods for FAs separation and purification, and the future prospects of coupling membrane technology with hydrolysis for enhanced production of FAs.

Microwave-assisted recovery of monomeric sugars from an acidic steam treated wood hydrolysate

Fractionation of components from bio-refinery wastes streams is complicated by the presence of both oligomer and lignin fractions. Microwave-assisted acid hydrolysis was used in this study to convert oligomer sugars in an industrial prehydrolysis liquor (PHL) to monomeric sugars. A total of 19.6 g/L monomeric sugars was obtained at a combined severity factor (CSF) of 3.2. Furthermore, it was found that xylan linked to lignin in a lignin-carbohydrate complex (LCC) could be liberated, resulting in lignin with a relatively low dispersity (3.12) and average molecular weight (1718 g/mol) that has high commercial value in the phenol–formaldehyde resin industry. This study presents for the first time a relatively inexpensive method for recovery of 100% of available sugars in the PHL without apparent loss in monomeric sugar as well as 50% removal of lignin as a valuable by-product. Application of this method can significantly improve the economic sustainability of forest-based biorefineries.

Enhancement of H2O2 Decomposition by the Co-catalytic Effect of WS2 on the Fenton Reaction for the Synchronous Reduction of Cr(VI) and Remediation of Phenol

The greatest problem in the Fe(II)/H₂O₂ Fenton reaction is the low production of ·OH owing to the inefficient Fe(III)/Fe(II) cycle and the low decomposition efficiency of H₂O₂ (<30%). Herein, we report a new discovery regarding the significant co-catalytic effect of WS₂ on the decomposition of H₂O₂ in a photoassisted Fe(II)/H₂O₂ Fenton system. With the help of WS₂ co-catalytic effect, the H₂O₂ decomposition efficiency can be increased from 22.9% to 60.1%, such that minimal concentrations of H₂O₂ (0.4 mmol/L) and Fe²⁺ (0.14 mmol/L) are necessary for the standard Fenton reaction. Interestingly, the co-catalytic Fenton strategy can be applied to the simultaneous oxidation of phenol (10 mg/L) and reduction of Cr(VI) (40 mg/L), and the corresponding degradation and reduction rates can reach up to 80.9% and 90.9%, respectively, which are much higher than the conventional Fenton reaction (52.0% and 31.0%). We found that the expose reductive W⁴⁺ active sites on the surface of WS₂ can greatly accelerate the rate-limiting step of Fe³⁺/Fe²⁺ conversion, which plays the key role in the decomposition of H₂O₂ and the reduction of Cr(VI). Our discovery represents a breakthrough in the field of inorganic catalyzing AOPs and greatly advances the practical utility of this method for environmental applications.

Separation of saccharides from prehydrolysis liquor of lignocellulose to upgrade dissolving pulp mill into biorefinery platform

In this work, a competitive process consisting of polyelectrolyte flocculation, active carbon absorption, and ion exchange was developed for hemicelluloses-derived saccharides (HDSs) purification from prehydrolysis liquor (PHL) of lignocellulose. Results showed that colloidal lignin counted for 20% of non-saccharide compounds (NSCs) and could be eliminated by flocculation at 500mg/L polyaluminium chloride and 50mg/L anionic polyacrylamide. Active carbon was very effective for decoloration of flocculation-treated PHL, but showed limited absorption selectivity toward NSCs. Lignin, the dominant component of NSCs, is characterized with phenolic hydrogen groups. Phenolic lignin could be easily captured by anion exchange resin with 80% removal. The proposed process showed great industrial potential because of the high value saccharides, but also low molecular phenolic lignin.