Efficient removal of Pb(II) by amine functionalized porous organic polymer through post-synthetic modification

Polyaniline-Based Cationic Porous Organic Polymers for Fast and Efficient Anion-Exchange-Driven Capture of Cr2O7 2

Efficient treatment of wastewater contaminated with carcinogenic Cr(VI) has been a long-term challenge for both academic and industrial research efforts. Removal of Cr(VI) species by ion exchange is a relatively simple and efficient method, and its combination with highly tailorable nanomaterials is promising for the treatment of such wastewater. Here, we report a type of cationic porous organic polymer (POP), namely, PTPA-PIP, which can be prepared simply by converting the corresponding aromatic polyamine PTPA to its protonated form, thereby significantly increasing its hydrophilicity and ability to disperse homogeneously in water, crucial for application in water treatment. In addition to detailed characterization of the physicochemical properties of PTPA-PIP (including using Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), and solid-state NMR techniques), adsorption experiments demonstrate that PTPA-PIP removes low-concentration dichromate anions with very high performance, including excellent exchange capacity (maximum capacity of 230 mg Cr2O7 2-/g PTPA-PIP), ultrafast removal (initial adsorption rate of 83 mg g-1 min-1), excellent selectivity (∼10% loss of adsorption capacity in the presence of 40-fold concentration of competing anions), as well as superior reusability (reusable for at least 5 cycles without compromised performance). These results demonstrate that PTPA-PIP is an outstanding candidate for application in industrial settings for the effective removal of harmful Cr(VI) pollutants in wastewater.

Synthesis of novel magnetic pitch-based hypercrosslinked polymers as adsorbents for effective recovery of Ag+ with high selectivity

Silver is an important precious metal with superior ductility, electrical and thermal conductivity, photosensitivity, and antibacterial properties. However, without proper recycling and treatment, silver emissions may pose a threat to the human health and subsistence environment due to their toxicity. Therefore, it is environmentally and economically important to recover Ag from waste electronic equipment and anode slime. Herein, carboxyl functionalized modified magnetic nanoparticles (Fe₃O₄@3-phenylglutaricacid nanoparticles) were designed and prepared to obtain the low-cost magnetic pitch-based HCP adsorbents (MPHCP and P-MPHCP). The novelty of present work is that superior adsorption capacity and magnetic responsiveness of adsorbent can be obtained by a simple one-step Friedel-Crafts reaction with very low-cost raw material. The maximum Ag⁺ adsorption capacity of MPHCP and P-MPHCP were 321 and 353 mg/g, respectively. The adsorption was completed within a short duration of 15 min for MPHCP and P-MPHCP at an initial Ag⁺ concentration of 100 mg/L. Moreover, the most selective is P-MPHCP wherein Ag⁺ is α = 61 times more selective than Pb²⁺ at a concentration of 100 mg/L.The adsorption capacity of MPHCP and P-MPHCP towards Ag⁺ still maintains above 89% after ten cycles of adsorption-desorption. This study not only provides new guidance for the development of porous polymeric adsorbents but also provides technical feasibility for the field of recovery and reutilization of precious metals, which has a very extensive practical application prospect.

Amine functionalized benzene based hypercrosslinked polymer as an adsorbent for CO2/N2 adsorption

In this work, benzene based hypercrosslinked polymer (HCP) as an adsorbent was modified using amine group to enhance CO₂ uptake capability and selectivity. Based on BET analysis result, the HCP and the modified HCP provide surface area of 806 (m² g^-1) and micropore volume of 453 (m² g^-1) and 0.19 (cm³ g^-1) and 0.14 (cm³ g^-1), respectively. The CO₂ and N₂ gases adsorption were performed in a laboratory scale reactor at a temperature between 298 and 328 K and pressure up to 9 bar. The experimental data were evaluated using isotherm, kinetic and thermodynamic models to identify the absorbent behavior. The maximum CO₂ adsorption capacity at 298 K and 9 bar was obtained 301.67 (mg g^-1) for HCP and 414.41 (mg g^-1) for amine modified HCP. The CO₂ adsorption thermodynamic parameters assessment including enthalpy changes, entropy changes, and Gibbs free energy changes at 298 K were resulted - 14.852 (kJ mol^-1), - 0.024 (kJ mol^-1 K^-1), - 7.597 (kJ mol^-1) for HCP and - 17.498 (kJ mol^-1), - 0.029(kJ mol^-1 K^-1), - 8.9 (kJ mol^-1) for amine functionalized HCP, respectively. Finally, the selectivity of the samples were calculated at a CO₂/N₂ composition of 15:85 (v/v) and 43% enhancement in adsorption selectivity at 298 K was obtained for amine modified HCP.

Highly Efficient Capture of Heavy Metal Ions on Amine-Functionalized Porous Polymer Gels

Porous polymer gels (PPGs) are characterized by inherent porosity, a predictable structure, and tunable functionality, which makes them promising for the heavy metal ion trap in environmental remediation. However, their real-world application is obstructed by the balance between performance and economy in material preparation. Development of an efficient and cost-effective approach to produce PPGs with task-specific functionality remains a significant challenge. Here, a two-step strategy to fabricate amine-enriched PPGs, NUT-21-TETA (NUT means Nanjing Tech University, TETA indicates triethylenetetramine), is reported for the first time. The NUT-21-TETA was synthesized through a simple nucleophilic substitution using two readily available and low-cost monomers, mesitylene and α, α′-dichloro-p-xylene, followed by the successful post-synthetic amine functionalization. The obtained NUT-21-TETA demonstrates an extremely high Pb2+ capacity from aqueous solution. The maximum Pb2+ capacity, qm, assessed by the Langmuir model was as high as 1211 mg/g, which is much higher than most benchmark adsorbents including ZIF-8 (1120 mg/g), FGO (842 mg/g), 732-CR resin (397 mg/g), Zeolite 13X (541 mg/g), and AC (58 mg/g). The NUT-21-TETA can be regenerated easily and recycled five times without a noticeable decrease of adsorption capacity. The excellent Pb2+ uptake and perfect reusability, in combination with a low synthesis cost, gives the NUT-21-TETA a strong potential for heavy metal ion removal.

Synthesis, characterization and application of high adsorption performance of novel 1,4-polyketone

This study aims to develop an alternating polyketone containing cationic groups in one and four alternating positions for increased functionality. A novel polyarylidene ketone was synthesized using simple condensation polymerization of terephthaldehyde and 2,5-hexane dione (PAK) The physicochemical properties of the resulting polymer were evaluated using Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, UV-Visible absorbance, fluorescence, and SEM investigations. The findings show that the polymer is amorphous, has good thermal stability, and emits red light. It can also be used as a dye adsorbent in aqueous solutions, with high selectivity for the cationic dye methylene blue (MB). The adsorbent efficiency of PAK was measured as a function of pH, dosage, and initial dye concentration; the greatest dye removal of 96 % was obtained at pH 10, 50 mg dosage, and initial dye concentration of 20 ppm. Kinetics and isotherms were studied, showing that the pseudo-second-order model described kinetic data better than Freundlich and Langmuir and revealed a satisfactory chemisorption process. This study suggests that PAK can purify MB dyeing wastewater, remove Zn²⁺, Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, Fe³⁺ metal ions well, and is selective for Fe³⁺ and Cu²⁺; ion adsorption is chelating-based.

Reutilization of waste biomass from sugarcane bagasse and orange peel to obtain carbon foams: Applications in the metal ions removal

The high levels of heavy metals contained in residual water and the pollution generated by a large amount of unexploited agro-industrial waste are a serious problem for the environment and mankind. Therefore, in the present work, with the aim of treating and reducing the pollution caused by heavy metal ions (Pb, Cd, Zn and Cu), activated carbons (ACs) were synthesized from sugarcane bagasse (SCB) and orange peel (OP) by means of physical - chemical activation method in an acid medium (H₃PO_4, 85 wt%) followed by an activation at high temperature (500 and 700 °C). Thereafter, these materials were used to produce carbon foams (CF) by the replica method and to evaluate their adsorbent capacity for the removal of heavy metals from synthetic water. XRD, FTIR, DLS, BET, Zeta Potential (ζ), SEM-EDS and AAS were used to investigate their structures, surface area, pore size, morphology, and adsorption capacity. The results show that as-prepared CF have a second level mesoporous structure and AC present a micro-mesoporous structure with a pore diameter between 3 and 4 nm. The experimental adsorption capacities of heavy metals showed that the CF from OP present a better elimination of heavy metals compared to the AC; exhibiting a removal capacity of 95.2 ± 3.96% (Pb) and 94.7 ± 4.88% (Cu) at pH = 5. The adsorption values showed that the optimal parameters to reach a high metal removal are pH values above 5. In the best of cases, the minimum remaining concentration of lead and copper were 2.4 and 2.6 mg L^-1, respectively. The experimental data for carbon adsorbents are in accordance with the Langmuir and BET isotherms, with R² = 0.99 and the maximum homogenous biosorption capacity for lead and copper was Q_max = 968.72 and 754.14 mg g^-1, respectively. This study showed that agro-industrial wastes can be effectively retrieved to produce adsorbents materials for wastewater treatment applications.

Potential of hypercrosslinked microporous polymer based on carbazole networks for Pb(II) ions removal from aqueous solutions

In this research, porous adsorbents of hypercrosslinked microporous polymer based on carbazole networks (HCP-CN) were synthesized for Pb(II) elimination from wastewaters. The results demonstrated that the extreme HCP-CN adsorbents utilization in wastewater treatment could remove more than 99.88% of Pb (II) ions. Furthermore, the two consumed adsorbents similarly indicated rapid adsorption kinetics, and it merely took a while to achieve adsorption equilibrium. These characteristics showed that HCP-CN adsorbent was an outstanding candidate for Pb(II) elimination from wastewater. Besides, the thermodynamic characteristics involving Gibbs free energy change (∆G⁰), entropy change (∆S⁰), and enthalpy change (∆H⁰) of the adsorption procedure were evaluated, and the results affirmed that the adsorption process was exothermic and spontaneous. In addition, response surface methodology (RSM) as a statistical investigation was used to optimize adsorption factors to obtain maximum adsorption capacity and investigate the interactive effect of parameters using central composite design (CCD). Optimum conditions obtained by RSM for maximum adsorption capacity of 26.02 mg/g are 35 °C, 40 mg/L, 11, 60 min, and 99.88 for temperature, initial concentration, pH, time, and removal percent, respectively. In the kinetic modeling study, the second-order model was selected as the best model. The values R² at temperatures 35 °C, 40 °C, and 55 °C are 0.997, 0.9997, and 0.998, respectively. In the isotherm modeling, Hill model with a value R² of 0.9766 has a superior precision compared to the other isotherm models. Also, the values of ΔH and ΔS at Pb(II) concentration of 60 mg/L are 122.622 kJ/mol and 0.463 kJ/mole K, respectively.

Materials for the Simultaneous Entrapment and Catalytic Aerobic Oxidative Removal of Sulfur Mustard Simulants

Materials that both sequester chemical warfare agents (CWAs) and then catalytically decontaminate the entrapped CWAs are highly sought. This article reports such a system for air-based catalytic removal of the sulfur mustard (HD) simulant, 2-chloroethyl ethyl sulfide (CEES). Hypercrosslinked polymers (HCPs) sequester CEES, and an HCP-embedded oxidation system comprising tribromide, nitrate, and acid (NO_xBr_xH⁺) simultaneously catalyzes the aerobic and selective, oxidative conversion of the entrapped CEES to the desired far less-toxic sulfoxide under ambient conditions (air and temperature). (NO_xBr_xH⁺) has been incorporated into three HCPs, a fluorobenzene HCP (HCP-F), a methylated HCP (HCP-M), and an HCP with acidic moieties (HCP-A). HCP-A acts as both an absorbing material and a catalytic component due to its acidic side chains. All three HCP/NO_xBr_xH⁺ systems work rapidly under these optimally mild conditions. No light or added oxidants are required. The HCP/NO_xBr_xH⁺ systems are recyclable.

Lead ion adsorption on functionalized sugarcane bagasse prepared by concerted oxidation and deprotonation

Targeting the removal of Pb²⁺ in wastewater, sugarcane bagasse was treated with nitric acid and an alkaline solution to prepare adsorbents. On a typical adsorbent, the adsorption isotherms agreed well with the Langmuir expression, and the maximum adsorption capacity reached 200.3 mg/g. In the presence of 150 ppm Ca²⁺, a common cation in natural water, the Pb²⁺ adsorption capacity slightly declined. In contrast, Mg²⁺ obviously prohibited the adsorption for Pb²⁺. The spent adsorbent could be regenerated at least five times through elution with an EDTA solution. EDS and XPS results demonstrated that nitric acid functioned as an oxidant instead of nitrification agent in the treatment of bagasse. The adsorption process was consistent with quasi-second-order kinetics. Based on thermodynamic studies, the changes in enthalpy and Gibbs free energy were calculated to be - 33.3 and ca. - 18 kJ/mol, indicating that the adsorption process was exothermic and spontaneous. The equilibrium Pb²⁺ adsorption amounts were proportional to the numbers of carboxylate groups on different adsorbents. The binding energies of Pd 4f_5/2 and Pd 4f_7/2 XPS spectra of Pb²⁺ adsorbed were 0.6-0.7 eV lower than those of free Pb(NO₃)₂, indicating the transfer of electrons during adsorption. The conversion of hydroxymethyl groups in sugarcane bagasse into carboxylate groups, as well as the chelation between Pb²⁺ ions and carboxylate groups, was validated in this work, which is beneficial for the treatment of wastewater polluted by lead ions.

Iminodiacetic acid-functionalized porous polymer for removal of toxic metal ions from water

The design of efficient adsorbent with abundant binding sites for heavy metal ions is crucial for developing innovative materials that will remove pollutant metal ions. The high uptake capacity, kinetics, and affinity towards the toxic metals are the key requirements that the materials under invesigation should accomplish. Here we report the synthesis of iminodiacetic acid-functionalized hypercrosslinked polymer (IDA-HCP) for purification of water polluted by toxic metal ions via coordination of carboxylate and amino active sites on the surface of porous polymer. The obtained porous polymer is stable under harsh conditions and the structural features on the polymer work together to help the removal of Pb(II) with 1138 mg g^-1 uptake capacity. In the meanwhile, the IDA-HCP reveals reuseability and very promising capture efficiency not only for Pb²⁺, but also for Hg²⁺ and Cd²⁺ from a mixture of Pb²⁺, Hg²⁺, Cd²⁺, Co²⁺, Fe³⁺, Zn²⁺, Mg²⁺, and Na⁺ metal ions. This result gives us confidence that the polymer material can solve the pollution problem caused by various metal ions.

Synthesis and Characterization of Functionalized Nanosilica for Zinc Ion Mitigation; Experimental and Computational Investigations

Zinc is an essential trace metal and its concentration above 4ppm reduces the aesthetic value of water. This study explores the possibility of using functionalized nanohybrids as Zn(II) ion scavengers from aqueous solution. Functionalized nanohybrids were synthesized by the attachment of thiosemicarbazide to silica. The material was characterized by TGA, SEM, FTIR, EDX, and BET analysis, which revealed ligand bonding to silica. The functionalized silica was employed as Zn(II) ion extractant in batch experiments and removed about 94.5% of the Zn(II) ions at pH 7, near zero point charge (6.5) in 30 min. Kinetics investigations revealed that zinc adsorption follows an intra particle diffusion mechanism and first-order kinetics (K = 0.1020 min⁻¹). The data were fitted to Freundlich, Dubinin–Radushkevich, and Langmuir models and useful ion exchange parameters were determined. The impact of co-existing ions on Zn(II) ion sequestration was also studied and it was found that the adsorbent can be used for selective removal of zinc with various ions in the matrix. Quantum mechanical investigations revealed that the Zn(II) ion adsorption on ZnBS1 is more favorable, having higher binding energy (BE) (−178.1 kcal/mol) and ∆H (−169.8), and making tridentate complex with the N and S sites of the chelating ligand. The negative ∆G and BE values suggest highly spontaneous Zn(II) adsorption on the modified silica even at low temperatures.

High adsorption capacity and super selectivity for Pb(Ⅱ) by a novel adsorbent: Nano humboldtine/almandine composite prepared from natural almandine

This study firstly reported a novel nano humboldtine/almandine composite (NHLA composite) prepared directly from almandine through one-pot method based on the interaction of almandine and oxalic acid. The formation of humboldtine/almandine binary phase from natural almandine was determined by X-ray diffraction. Analysis of scanning & transmission electron microscope showed that large amount of nano humboldtine with uniform size (average size of 15.59 nm) were loaded on the almandine sheets. Compared with raw minerals, Pb(Ⅱ) removal capacity of synthesized composite was significantly increased, demonstrating that the main active ingredient for Pb(Ⅱ) removal was humboldtine phase rather than almandine itself. Pb(Ⅱ) adsorption capacity was increased with the increasing of initial pH value or temperature. Langmuir isotherm and Pseudo-second order kinetic equation were well fitted with experimental results and the maximum Pb(Ⅱ) adsorption capacity from Langmuir isotherm was 574.71 mg/g at temperature of 25 °C. In addition, heavy metal removal experiments in coexisting systems of multiple heavy metal ions manifested that the composite had a high selectivity for Pb(Ⅱ) adsorption. Ion exchange, surface complexation and electrostatic interaction have involved in the Pb(Ⅱ) adsorption. The synthesized composite was considered as a low cost, high efficiency, super selectivity and easy to mass production material for Pb(Ⅱ) adsorption from solution.

AB2 polymerization on hollow microporous organic polymers: engineering of solid acid catalysts for the synthesis of soluble cellulose derivatives

New post-synthetic functionalization of hollow microporous organic polymers was developed based on AB₂ polymerization and thiol–yne click reaction.

Removal of Heavy Metals and Metalloids from Water Using Drinking Water Treatment Residuals as Adsorbents: A Review

Heavy metal contamination is one of the most important environmental issues. Therefore, appropriate steps need to be taken to reduce heavy metals and metalloids in water to acceptable levels. Several treatment methods have been developed recently to adsorb these pollutants. This paper reviews the ability of residuals generated as a by-product from the water treatment plants to adsorb heavy metals and metalloids from water. Water treatment residuals have great sorption capacities due to their large specific surface area and chemical composition. Sorption capacity is also affected by sorption conditions. A survey of the literature shows that water treatment residuals may be a suitable material for developing an efficient adsorbent for the removal of heavy metals and metalloids from water.

Development of magnetic porous coordination polymer adsorbent for the removal and preconcentration of Pb(II) from environmental water samples

A novel porous coordination polymer adsorbent (BTCA-P-Cu-CP) based on a piperazine(P) as a ligand and 1,2,4,5-benzenetetracarboxylic acid (BTCA) as a linker was synthesized and magnetized to form magnetic porous coordination polymer (BTCA-P-Cu-MCP). Fourier transform infrared (FTIR), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), field emission scanning electron microscope(FESEM), energy-dispersive X-ray spectroscopy(EDS), CHN, and Brunauer-Emmett-Teller(BET) analysis were used to characterize the synthesized adsorbent. BTCA-P-Cu-MCP was used for removal and preconcentration of Pb(II) ions from environmental water samples prior to flame atomic absorption spectrometry(FAAS) analysis. The maximum adsorption capacity of BTCA-P-Cu-MCP was 582 mg g^-1. Adsorption isotherm, kinetic, and thermodynamic parameters were investigated for Pb(II) ions adsorption. Magnetic solid phase extraction (MSPE) method was used for preconcentration of Pb(II) ions and the parameters influencing the preconcentration process have been examined. The linearity range of proposed method was 0.1-100 μg L^-1 with a preconcentration factor of 100. The limits of detection and limits of quantification for lead were 0.03 μg L^-1 and 0.11 μg L^-1, respectively. The intra-day (n = 7) and inter-day (n = 3) relative standard deviations (RSDs) were 1.54 and 3.43% respectively. The recoveries from 94.75 ± 4 to 100.93 ± 1.9% were obtained for rapid extraction of trace levels of Pb(II) ions in different water samples. The results showed that the BTCA-P-Cu-MCP was steady and effective adsorbent for the decontamination and preconcentration of lead ions from the aqueous environment.

PDMS-coated hypercrosslinked porous organic polymers modified via double postsynthetic acidifications for ammonia capture

Double postsynthetic acidifications of a hypercrosslinked polymer afforded record high NH₃ adsorption capacity per surface area. Its PDMS coating provided an 40-fold enhancement of low-pressure NH₃ adsorption capacity and hydrophobicity.

A hypercrosslinked porous organic polymer was modified by post-oxidation and post-sulfonation to obtain a porous platform with a high density of acidic groups. Such an acidified material exhibits record high NH₃ adsorption capacity per surface area, fast adsorption rate, and recyclability at low desorption temperature. Noticeably, the coating of the polymer with PDMS represents a facile and efficient route to enable both a significant improvement of low-pressure NH₃ adsorption capacity (∼40-fold enhancement; from 0.04 to 1.41 mmol g^–1) with respect to the non-modified polymer at 500 ppm and hydrophobicity associated with the selective sorption of NH₃ over water vapor (hydrophilic for the non-coated material). This material is easy to prepare, cost-effective, and scalable to mass production.

Fabrication of Composite Beads Based on Calcium Alginate and Tetraethylenepentamine-Functionalized MIL-101 for Adsorption of Pb(II) from Aqueous Solutions

In this work, a tetraethylenepentamine (TEPA)-grafted metal-organic framework material (MIL-101) was synthesized. The introduction of TEPA increased the abundance of functional groups on the MIL-101. As a powdery adsorbent, MIL-101-TEPA can be difficult to separate. In order to solve this problem, we combined MIL-101-TEPA with sodium alginate (SA) and injected the mixture into a CaCl₂ solution to solidify the powder into beads with a particle size of 3 mm. The easily recovered adsorbent was applied to the adsorption of Pb(II) from water. The structure and characterization of the adsorbent were investigated through scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). We also optimized the adsorption conditions. The results of the study showed that the adsorption process was chemisorptive and endothermic in nature. The maximum adsorption capacity of the composite beads was 558.6 mg/g. Meanwhile MIL-101-TEPA@CA showed good repeatable utilization.

Experimental design data for the zinc ions adsorption based on mesoporous modified chitosan using central composite design method

In the present study, new generation of silica-based mesoporous adsorbents were introduced for the removal of heavy metals with the aim of developing new adsorption technologies in water treatment. The magnetic nanoadsorbent, prepared by modification of SBA-15 with [3-(2-Aminoethylamino) propyl] trimethoxysilane (AEAPTMS)-functionalized chitosan, was applied for the removal of Zn²⁺ from aqueous solution. The synthesized Fe₂O₃@SBA-15-CS-AEAPTMS nanoadsorbent was thoroughly characterized using XRD, TEM, FTIR and BET analysis. In order to determine the optimum condition of Zn²⁺ adsorption on Fe₂O₃@SBA-15-CS-AEAPTMS (3 ml), the experiments were performed based on central composite design in a response surface methodology method. The obtained results were further studied using adsorption kinetic, isotherm and thermodynamic relations which revealed that Zn²⁺ adsorption was spontaneous and endothermic with enhanced adsorption efficiency achieved for higher contents of functional groups. In addition, according to the results, the adsorption process was best conformed to Langmuir isotherm (with R² > 0.99 and q_max = 107.21 mg g^-1) and pseudo second-order kinetic model (with R² > 0.999). The values of standard entropy (DS°) and activation energy (E_a) reduced as the initial concentration was increased and the dominant mechanism was found to be chemisorption.