Synthesis of BiOBr x I 1−x solid solutions with dominant exposed {0 0 1} and {1 1 0} facets and their visible-light-induced photocatalytic properties

β-Bi2O3 Nanosheets Functionalized with Bisphenol A Synthetic Receptors: A Novel Material for Sensitive Photoelectrochemical Platform Construction

In this study, β-Bi₂O₃ nanosheets functionalized with bisphenol A (BPA) synthetic receptors were developed by a simple molecular imprinting technology and applied as the photoelectric active material for the construction of a BPA photoelectrochemical (PEC) sensor. BPA was anchored on the surface of β-Bi₂O₃ nanosheets via the self-polymerization of dopamine monomer in the presence of a BPA template. After the elution of BPA, the BPA molecular imprinted polymer (BPA synthetic receptors)-functionalized β-Bi₂O₃ nanosheets (MIP/β-Bi₂O₃) were obtained. Scanning electron microscopy (SEM) of MIP/β-Bi₂O₃ revealed that the surface of β-Bi₂O₃ nanosheets was covered with spherical particles, indicating the successful polymerization of the BPA imprinted layer. Under the best experimental conditions, the PEC sensor response was linearly proportional to the logarithm of BPA concentration in the range of 1.0 nM to 1.0 μM, and the detection limit was 0.179 nM. The method had high stability and good repeatability, and could be applied to the determination of BPA in standard water samples.

Immobilized BiOCl0.75I0.25/g-C3N4 nanocomposites for photocatalytic degradation of bisphenol A in the presence of effluent organic matter

The BiOCl_0.75I_0.25/g-C₃N₄ nanosheet (BCI-CN) was successfully immobilized on polyolefin polyester fiber (PPF) through the hydrothermal method. The novel immobilized BiOCl_0.75I_0.25/g-C₃N₄ nanocomposites (BCI-CN-PPF) were characterized by scanning electron microscope (SEM), energy dispersive spectroscopy EDS, X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV-vis diffuse reflectance spectroscopy (UV-vis DRS) to confirm that BCI-CN was successfully immobilized on PPF with abundant oxygen vacancies reserved. Under simulated solar light irradiation, 100 % of bisphenol A (BPA) with an initial concentration of 10 mg·L^-1 was degraded by BCI-CN-PPF (0.2 g·L^-1 of BCI-CN immobilized) after 60 min. A similar photocatalytic efficiency of BPA was obtained in the presence of effluent organic matter (EfOM). The photocatalytic degradation of BPA was not affected by EfOM <5 mg-C/L. In comparison, the photocatalytic performance was considerably inhibited by EfOM with a concentration of 10 mg-C/L. Furthermore, photogenerated holes and superoxide radicals predominated in the photocatalytic degradation processes of BPA. The total organic carbon (TOC) removal efficiencies of BPA and EfOM were 75.2 % and 50 % in the BCI-CN-PPF catalytic system. The BPA removal efficiency of 94.9 % was still achieved in the eighth cycle of repeated use. This study provides a promising immobilized nanocomposite with high photocatalytic activity and excellent recyclability and reusability for practical application in wastewater treatment.

Anchoring bismuth oxybromo-iodide solid solutions on flexible electrospun polyacrylonitrile nanofiber mats for floating photocatalysis

Constructing floating photocatalysts with highly efficient visible-light utilization is a promising approach for practical photocatalytic wastewater treatment. In this study, we anchored bismuth oxybromo-iodide (BiOBr_xI_1-x (0 ≤ x ≤ 1)) on flexible electrospun polyacrylonitrile (PAN) nanofiber mats to create BiOBr_xI_1-x@PAN nanofibers with tunable light absorption properties as floating photocatalysts at room temperature. As x increased, the photocatalytic activity of the BiOBr_xI_1-x@PAN nanofibers with similar loading content initially increased, and then decreased, for the degradation of bisphenol A (BPA) and methyl orange (MO) under visible-light irradiation (λ > 420 nm) conditions. The BiOBr_xI_1-x@PAN (0 < x < 1) nanofibers exhibited better photocatalytic performance compared to the BiOBr@PAN and BiOI@PAN nanofibers. Under visible-light irradiation, the BPA degradation rate of the BiOBr_0.5I_0.5@PAN nanofibers was 1.9 times higher than that of the BiOI@PAN nanofibers, while the BiOBr@PAN nanofibers had no noticeable degradation performance. The MO degradation rate of the BiOBr_0.5I_0.5@PAN nanofibers was 2.5 and 3.2 times higher than that of the BiOBr@PAN and BiOI@PAN nanofibers, respectively. The enhanced performance possibly originated from a balance between the light absorption and redox capabilities, along with efficient separation of electron-hole pairs in the BiOBr_0.5I_0.5@PAN nanofibers, as determined by ultraviolet-visible diffuse reflectance spectroscopy, X-ray photoelectron spectra analysis of the valence bands, and photocurrent response characterization. Compared to the powder structures, the BiOBr_xI_1-x@PAN nanofibers showed enhanced performance due to the excellent dispersion and immobilization of the BiOBr_xI_1-x solid solution, which provided more active sites during photocatalytic degradation. In addition, their flexible self-supporting structures allowed for floating photocatalysis near the water surface. They could be reused directly without separation and maximized the absorption of visible light during the photocatalytic reaction. Therefore, these solid-solution-based floatable nanofiber photocatalysts are good potential candidates for wastewater treatment applications.

Synthesis of bismuth oxyhalide (BiOBrzI(1-z)) solid solutions for photodegradation of methylene blue dye

Background: The removal of textile wastes is a priority due to their mutagenic and carcinogenic properties.  In this study, bismuth oxyhalide was used in the removal of methylene blue (MB) which is a textile waste. The main objective of this study was to develop and investigate the applicability of a bismuth oxyhalide (BiOBr _zI _(1-z)) solid solutions in the photodegradation of MB under solar and ultraviolet (UV) light irradiation.

Methods: Bismuth oxyhalide (BiOBr _zI _(1-z)) (0 ≤ z ≤ 1) materials were successfully prepared through the hydrothermal method. Brunauer-Emmett-Teller (BET), transmission electron microscope (TEM), X-ray diffractometer (XRD), and scanning electron microscope (SEM) were used to determine the surface area, microstructure, crystal structure, and morphology of the resultant products. The photocatalytic performance of BiOBr _zI _(1-z) materials was examined through methylene blue (MB) degradation under UV light and solar irradiation.

Results: The XRD showed that BiOBr _zI _(1-z) materials crystallized into a tetragonal crystal structure with (102) peak slightly shifting to lower diffraction angle with an increase in the amount of iodide (I ^-). BiOBr _0.6I _0.4 materials showed a point of zero charge of 5.29 and presented the highest photocatalytic activity in the removal of MB with 99% and 88% efficiency under solar and UV irradiation, respectively. The kinetics studies of MB removal by BiOBr _zI _(1-z) materials showed that the degradation process followed nonlinear pseudo-first-order model indicating that the removal of MB depends on the population of the adsorption sites. Trapping experiments confirmed that photogenerated holes (h ⁺) and superoxide radicals ( ^•O ₂⁻) are the key species responsible for the degradation of MB.

Conclusions: This study shows that bismuth oxyhalide materials are very active in the degradation of methylene blue dye using sunlight and thus they have great potential in safeguarding public health and the environment from the dye’s degradation standpoint. Moreover, the experimental results agree with nonlinear fitting.

Synthesis of bismuth oxyhalide (BiOBr zI (1- z)) solid solutions for photodegradation of methylene dye

Background: The removal of textile wastes is a priority due to their mutagenic and carcinogenic properties.  In this study, bismuth oxyhalide was used in the removal of methylene blue (MB) which is a textile waste. The main objective of this study was to develop and investigate the applicability of a bismuth oxyhalide (BiOBr _zI _(1-z)) solid solutions in the photodegradation of MB under solar and ultraviolet (UV) light irradiation. Methods: Bismuth oxyhalide (BiOBr _zI _(1-z)) (0 ≤ z ≤ 1) materials were successfully prepared through the hydrothermal method. Brunauer-Emmett-Teller (BET), transmission electron microscope (TEM), X-ray diffractometer (XRD), and scanning electron microscope (SEM) were used to determine the surface area, microstructure, crystal structure, and morphology of the resultant products. The photocatalytic performance of BiOBr _zI _(1-z) materials was examined through methylene blue (MB) degradation under UV light and solar irradiation. Results: The XRD showed that BiOBr _zI _(1-z) materials crystallized into a tetragonal crystal structure with (102) peak slightly shifting to lower diffraction angle with an increase in the amount of iodide (I ^-). BiOBr _0.6I _0.4 materials showed a point of zero charge of 5.29 and presented the highest photocatalytic activity in the removal of MB with 99% and 88% efficiency under solar and UV irradiation, respectively. The kinetics studies of MB removal by BiOBr _zI _(1-z) materials showed that the degradation process followed nonlinear pseudo-first-order model indicating that the removal of MB depends on the population of the adsorption sites. Trapping experiments confirmed that photogenerated holes (h ⁺) and superoxide radicals ( ^•O ₂ ^-) are the key species responsible for the degradation of MB. Conclusions : This study shows that bismuth oxyhalide materials are very active in the degradation of methylene blue dye using sunlight and thus they have great potential in safeguarding public health and the environment from the dye's degradation standpoint. Moreover, the experimental results agree with nonlinear fitting.

Thermochemical stability, and electronic and dielectric properties of Janus bismuth oxyhalide BiOX (X = Cl, Br, I) monolayers

Ultrathin monolayers of bismuth oxyhalide materials BiOX (X = Cl, Br, I) grown along 〈001〉 are studied using first-principles density functional theory. Both pristine BiOX and Janus (X, X' = Cl, Br, I) monolayers are investigated by analyzing their structural stability using formation enthalpy and phonon density of states. On the other hand, their thermochemical reactivity is understood from their surface energy trends in symmetric and asymmetric terminations. The theoretically measured optical band gaps and fundamental band gaps of these Janus monolayers are compared with their pristine counterparts BiOX and BiOX' as well as to the known experimental measurements. All of the possible Janus monolayers possess structural, electronic and optical properties intermediate to the corresponding properties of the two associated pristine BiOX and BiOX' monolayers. According to the formation enthalpy, stabilization is equally favorable for all the monolayers, whereas the lowest surface energy is found for BiOCl_0.5Br_0.5, leading to excellent thermochemical reactivity which is consistent with recent experimental measurements. The frequency dependent dielectric functions are simulated in the density functional perturbation theory limit, and the optical band gaps are estimated from the absorption and reflectance spectra, and are in excellent agreement with the known experimentally measured values. High frequency dielectric constants of these materials with 2D symmetry are estimated from G ₀ W ₀ calculations including local field and spin-orbit effects. The larger dielectric constants and wider differences in the charge carriers' effective masses also provide proof that this new class of 2D materials has potential in photo-electrochemical applications. Thus, fabricating Janus monolayers of these oxyhalide compounds would open up a rational design strategy for tailoring their optoelectronic properties, which may offer guidance for the design of highly efficient optoelectronic materials for catalysis, valleytronic, and sensing applications.

Synthesis and enhanced visible light photocatalytic CO2 reduction of BiPO4–BiOBrxI1−x p–n heterojunctions with adjustable energy band

A series of novel BiPO₄–BiOBr_xI_1−x p–n heterojunctions were successfully prepared by a facile solvothermal method. The morphology, structure and optical properties of photocatalysts were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and ultraviolet visible diffuse reflectance spectroscopy. The visible light photocatalytic activities of BiPO₄–BiOBr_xI_1−x heterojunctions were investigated by photocatalytically reducing CO₂. After 4 hours of irradiation, the 5% BiPO₄–BiOBr_0.75I_0.25 heterojunction showed the highest photocatalytic activity with the yields of CO and CH₄ up to 24.9 and 9.4 μmol g_cat⁻¹ respectively. The improved photocatalytic activity may be due to the formation of BiPO₄–BiOBr_xI_1−x p–n heterojunctions which can effectively restrict the recombination rate of the photoexcited charge carriers. Moreover, the energy band structure of BiPO₄–BiOBr_xI_1−x heterojunctions could be easily adjusted by changing the mole ratio of I and Br. The possible mechanism of the enhancement of the photocatalytic performance was also proposed based on experimental and theoretical analysis. The present study may provide a rational strategy to design highly efficient heterojunctions with an adjustable energy band for environmental treatment and energy conversion.

A series of novel BiPO₄–BiOBr_xI_1−x p–n heterojunctions were successfully prepared by a facile solvothermal method.