Efficient electrochemical recovery of fine tellurium powder from hydrochloric acid media via mass transfer enhancement

The cryptic step in the biogeochemical tellurium (Te) cycle: Indirect elementary Te oxidation mediated by manganese-oxidizing bacteria Bacillus sp. FF-1

Tellurium (Te) is a rare element within the chalcogen group, and its biogeochemical cycle has been studied extensively. Tellurite (Te(IV)) is the most soluble Te species and is highly toxic to organisms. Chemical or biological Te(IV) reduction to elemental tellurium (Te0) is generally considered an effective detoxification route for Te(IV)-containing wastewater. This study unveils a previously unnoticed Te0 oxidation process mediated by the manganese-oxidizing bacterium Bacillus sp. FF-1. This bacterium, which exhibits both Mn(II)-oxidizing and Te(IV)-reducing abilities, can produce manganese oxides (BioMnOx) and Te0 (BioTe0) when exposed to Mn(II) and Te(IV), respectively. When 5 mM Mn(II) was added after incubating 0.1 mM or 1 mM Te(IV) with strain FF-1 for 16 h, BioTe0 was certainly re-oxidized to Te(IV) by BioMnOx. Chemogenic and exogenous biogenic Te0 can also be oxidized by BioMnOx, although at different rates. This study highlights a new transformation process of tellurium species mediated by manganese-oxidizing bacteria, revealing that the environmental fate and ecological risks of Te0 need to be re-evaluated.

Vacuum Gasification-Directional Condensation for Separation of Tellurium from Lead Anode Slime

Tellurium is the indispensable base material of semiconductors in solar panels. Traditional tellurium recycling, a highly complicated separation process, has exhausted reagents and energy sources whilst producing waste residue and water containing multitudinous heavy metal that is hugely harmful to the ecological environment. A clean and eco-friendly vacuum distillation-directional condensation treatment was investigated for its potential to recycle tellurium from tellurium-rich lead anode slime (TLAS). The optimal distillation temperature and response time conditions of 1173 K and 50 min were obtained based on a large number of experiments. Gasification results indicated that under the optimal conditions of distillation temperature 1173 K, constant temperature time 50 min, and system pressure 5–15 Pa, 92% of tellurium was volatilized and enriched into the condenser from TLAS. Condensate results revealed that 88% of elemental tellurium was directly recovered in the volatile matter. The appropriate gasification-condensation processes realized a clean utilization to extract tellurium and separate multi valuable metals effectively.

Electrochemical recovery and high value-added reutilization of heavy metal ions from wastewater: Recent advances and future trends

Wastewater treatment for heavy metals is currently transitioning from pollution remediation towards resource recovery. As a controllable and environment-friendly method, electrochemical technologies have recently gained significant attention. However, there is a lack of systematic and goal oriented summarize of electrochemical metal recovery techniques, which has inhibited the optimized application of these methods. This review aims at recent advances in electrochemical metal recovery techniques, by comparing different electrochemical recovery methods, attempts to target recycling heavy metal resources with minimize energy consumption, boost recovery efficiency and realize the commercial application. In this review, different electrochemical recovery methods (including E-adsorption recovery, E-oxidation recovery, E-reduction recovery, and E-precipitation recovery) for recovering heavy metals are introduced, followed an analysis of their corresponding mechanisms, influencing factors, and recovery efficiencies. In addition, the mass transfer efficiency can be promoted further through optimizing electrodes and reactors, and multiple technologies (photo-electrochemical and sono-electrochemical) could to be used synergistically improve recovery efficiencies. Finally, the most promising directions for electrochemical recovery of heavy metals are discussed along with the challenges and future opportunities of electrochemical technology in recycling heavy metals from wastewater.

Characterisation of selenium and tellurium nanoparticles produced by Aureobasidium pullulans using a multi-method approach

Aureobasidium pullulans was grown in liquid culture media amended with selenite and tellurite and selenium (Se) and tellurium (Te) nanoparticles (NPs) were recovered after 30 d incubation. A separation method was applied to recover and characterise Se and Te NPs by asymmetric flow field flow fractionation (AF4) with online coupling to multi-angle light scattering (MALS), ultraviolet visible spectroscopy (UV-Vis), and inductively coupled plasma mass spectrometry (ICP-MS) detectors. Additional characterisation data was obtained from transmission electron microscopy (TEM), and dynamic light scattering (DLS). Solutions of 0.2% Novachem surfactant and 10 mM phosphate buffer were compared as mobile phases to investigate optimal AF4 separation and particle recovery using Se-NP as a model sample. 88% recovery was reported for 0.2% Novachem solution, compared with 50% recovery for phosphate buffer. Different crossflow (C_flow) rates were compared to further investigate optimum separation, with recoveries of 88% and 30% for Se-NPs, and 90% and 29% for Te-NPs for 3.5 mL min^-1 and 2.5 mL min^-1 respectively. Zeta-potential (ZP) data suggested higher stability for NP elution in Novachem solution, with increased stability attributed to minimised NP-membrane interaction due to PEGylation. Detection with MALS showed monodisperse Se-NPs (45-90 nm) and polydisperse Te-NPs (5-65 nm).Single particle ICP-MS showed mean particle diameters of 49.7 ± 2.7 nm, and 135 ± 4.3 nm, and limit of size detection (LOSD) of 20 nm and 45 nm for Se-NPs and Te-NPs respectively. TEM images of Se-NPs and Te-NPs displayed a spherical morphology, with the Te-NPs showing a clustered arrangement, which suggested electrostatic attraction amongst neighbouring particles. Particle hydrodynamic diameters (d_H) measured with dynamic light scattering (DLS) further suggested monodisperse Se-NPs and polydisperse Te-NPs distributions, showing good agreement with AF4-MALS for Se-NPs, but suggests that the R_g obtained from AF4-MALS for Te-NP was unreliable. The results demonstrate a complementary application of asymmetric flow field-flow fractionation (AF4), ICP-MS, light scattering, UV-Vis detection, and microscopic techniques to characterise biogenic Se and Te NPs.

In situ growth of CuS decorated graphene oxide-multiwalled carbon nanotubes for ultrasensitive H2O2 detection in alkaline solution

A novel hybrid nanomaterial composed of nanoparticles, nanotubes and nanosheets for electrochemical H₂O₂ detection.