Degradation of diazinon by new hybrid nanocomposites N-TiO2/Graphene/Au and N-TiO2/Graphene/Ag using visible light photo-electro catalysis and photo-electro catalytic ozonation: Optimization and comparative study by Taguchi method

A photoelectrochemical aptasensor based on W6+-doped carbon nitride with carbon-rich structure for sensitive detection of diazinon

A photoelectrochemical (PEC) aptasensor us reported based on W6+-doped carbon nitride with carbon-rich structure (WCCN). WCCN exhibited excellent photoelectric conversion performance owing to the carbon-rich structure and W6+ doping. C atoms can replace the center N/edge N atoms to form a carbon-rich structure, improving the insufficient light absorption of CN in the visible region. Also, W6+ doping forms a directional electron transfer channel, achieving the efficient separation and transport of carriers. W6+ doping and carbon-rich structure can promote the generation, transfer, and separation of photogenerated carriers, further enhancing PEC performance. The fabricated PEC aptasensor based on WCCN demonstrated a wide detection range (3.92 ~ 588 pg L-1), a low detection limit (1.31 pg L-1, S/N = 3), good reproducibility, selectivity, stability, and practical application in actual water samples. This work explores the modification strategy of element doping for carbon nitride with high photoelectric property and offers a cost-effective and simplified method for the detection of pesticide residues.

Preparation of Fe2(MoO4)3/graphene/Ti nanocomposite electrode for visible-light photoelectrocatalytic degradation of organic pollutants

The massive emission of organic pollutants, specially organic dyes into water poses a serious threat to the environment and human health. Photoelectrocatalysis (PEC) has been regarded as an efficient, promising and green technology for organic pollution degradation and mineralization. Herein, Fe₂(MoO₄)₃/graphene/Ti nanocomposite was synthesized and applied as a superior photoanode in a visible-light PEC process for degradation and mineralization of an organic pollutant. First, the Fe₂(MoO₄)₃ was synthesized by the microemulsion-mediated method. Then, Fe₂(MoO₄)₃ and graphene particles were simultaneously immobilized on a titanium plate by the electrodeposition technique. The prepared electrode was characterized by XRD, DRS, FTIR and FESEM analyses. The ability of the nanocomposite was investigated in the Reactive Orange 29 (RO29) pollutant degradation by the PEC. The Taguchi method was used for the visible-light PEC experiments design. The efficiency of RO29 degradation was enhanced with increasing bias potential, number of Fe₂(MoO₄)₃/graphene/Ti electrodes, visible-light power and Na₂SO₄ (electrolyte) concentration. The pH of the solution was the most influential variable in the visible-light PEC process. Furthermore, the performance of the visible-light PEC was compared with photolysis, sorption, visible-light photocatalysis and electrosorption processes. The obtained results confirm the synergistic effect of these processes on RO29 degradation by the visible-light PEC.

Challenges and effectiveness of nanotechnology-based photocatalysis for pesticides-contaminated water: A review

Pesticides have been frequently used in agricultural fields. Due to the expeditious utilization of pesticides, their excessive usage has negative impacts on the natural environment and human health. This review discusses the successful implications of nanotechnology-based photocatalysis for the removal of environmental pesticide contaminants. Notably, various nanomaterials, including TiO₂, ZnO, Fe₂O₃, nanoscale zero-valent iron, nanocomposite-based materials, have been proposed and have played a progressively essential role in wastewater treatment. In addition, a detailed review of the crucial reaction condition factors, including water matrix, pH, light source, temperature, flow rate (retention time), initial concentration of pesticides, a dosage of photocatalyst, and radical scavengers, is also highlighted. Additionally, the degradation pathway of pesticide mineralization is also elucidated. Finally, the challenges of technologies and the future of nanotechnology-based photocatalysis toward the photo-degradation of pesticides are thoroughly discussed. It is expected that those innovative extraordinary photocatalysts will significantly enhance the performance of pesticides degradation in the coming years.

Application of Nanocatalysts in Advanced Oxidation Processes for Wastewater Purification: Challenges and Future Prospects

The increase in population demands for industrialization and urbanization which led to the introduction of novel hazardous chemicals in our environment. The most significant parts of these harmful substances found in water bodies remain in the background, causing a health risk to humans and animals. It is critical to remove these toxic chemicals from the wastewater to keep a cleaner and greener environment. Hence, wastewater treatment is a challenging area these days to manage liquid wastes effectively. Therefore, scientists are in search of novel technologies to treat and recycle wastewater, and nanotechnology is one of them, thanks to the potential of nanoparticles to effectively clean wastewater while also being ecologically benign. However, there is relatively little information about nanocatalysts’ applicability, efficacy, and challenges for future applications in wastewater purification. This review paper is designed to summarize the recent studies on applying various types of nanocatalysts for wastewater purification. This review paper highlights innovative work utilizing nanocatalysts for wastewater applications and identifies issues and challenges to overcome for the practical implementation of nanocatalysts for wastewater treatment.

In situ engineering of highly conductive TiO2/carbon heterostructure fibers for enhanced electrocatalytic degradation of water pollutants

Rational design of nanocomposite electrode materials with high conductivity, activity, and mechanical strength is critical in electrocatalysis. Herein, freestanding, flexible heteronanocomposites were fabricated in situ by carbonizing electrospun fibers with TiO₂ nanoparticles on the surface for electrocatalytic degradation of water pollutants. The carbonization temperature was observed as a dominant parameter affecting the characteristics of the electrodes. As the carbonization temperature increased to 1000 °C, the conductivity of the electrode was significantly enhanced due to the high degree of graphitization (I_D/I_G ratio 1.10) and the dominant rutile phase. Additionally, the formation of TiO₂ protrusions and the C-Ti heterostructure were observed at 1000 °C, which contributed to increasing the electrocatalytic activity. When 1.5 V (vs. Ag/AgCl) was employed, electrocatalytic experiments using the electrode achieved 90% degradation of crystal violet and 10.9-87.5% for an array of micropollutants. The electrical energy-per-order (EEO) for the removal of crystal violet was 0.7 kWh/m³/order, indicative of low-energy requirement. The efficient electrocatalytic activity can be ascribed to the fast electron transfer and the strong ability to generate hydroxyl radicals. Our findings expand efforts for the design of highly conductive heteronanocomposites in a facile in situ approach, providing a promising perspective for the energy-efficient electrocatalytic degradation of water pollutants.

Advances on removal of organophosphorus pesticides with electrochemical technology

Widespread use of organophosphorus pesticides (OPs), especially superfluous and unreasonable use, had brought huge harm to the environment and food chain. It is because only a small part of the pesticides sprayed reached the target, and the rest slid across the soil, causing pollution of groundwater and surface water resources. These pesticides accumulate in the environment, causing environmental pollution. Therefore, in recent years, the control and degradation of OPs have become a public spotlight and research hotspot. Due to its unique advantages such as versatility, environmental compatibility, controllability, and cost-effectiveness compatibility, electrochemical technology has become one of the most promising methods for degradation of OPs. The fundamental knowledge about electrochemical degradation on OPs was introduced in this review. Then, a comprehensive overview of four main types of practical electrochemical technologies to degrade pesticides were presented and evaluated. The knowledge contained herein should conduce to better understand the degradation of pesticides by electrochemical technology, and better exploit the degradation of pesticides in the environment and food. Overall, the objective of this review is to provide comprehensive guidance for rational design and application of electrochemical technology in the degradation of OPs for the safety of the environment and food chain in the future.

Photocatalytic removal of diazinon from aqueous solutions: a quantitative systematic review

Diazinon is a widely used pesticide that can be effectively degraded in aqueous solutions via photocatalytic oxidation. This quantitative systematic review was conducted to shed light on the various aspects of photocatalytic diazinon removal based on evidence. A systematic search was performed in Scopus, PubMed, Web of Science, Embase, and Ovid databases with keywords including diazinon, photocatalysis, and their equivalents. The search was limited to original articles in English published between January 1, 2010, and March 25, 2021. The results were expressed by descriptive statistics including mean, SD, median, and percentiles, among others. The initial electronic and manual search retrieved 777 articles, among which 41 studies comprising 49 trials were qualified for data synthesis. The reported diazinon degradation rate ranged from 2 to 100%, with a mean ± SD of 59.17 ± 28.03%. Besides, ZnO/UV, WO₃/UV, TiO₂/UV, and TiO₂/Vis, in sequence, were the most widely used processes with the highest efficacies. Solution pH in the range of 5-8, catalyst dose below 600 mg/L, diazinon initial concentration below 40 mg/L, and contact time of 20-140 min could be the optimum conditions. Diazinon degradation obeyed the first-order kinetic model with k_obs between 0.0042 and 1.86 min^-1 and consumed energy of 38.93-350.36 kWh/m³. Diazoxon and IMP were the most detected by-products of diazinon degradation although bioassay data were scarce. Based on the results, photocatalytic processes are very efficient in removing diazinon from aqueous solutions although more elaborate studies are needed to assess the mineralization rate and effluent toxicity.

Insight into natural medium remediation through ecotoxicity correlation with clay catalyst selectivity in organic molecule ozonation

The oxidative degradation of diazinon (DAZ) and diclofenac sodium (DCF) in aqueous media was comparatively investigated and correlated with the mortality of Artemia salina in the presence of clay catalysts. For this purpose, montmorillonites (Mt) exchanged with Na⁺ and Fe²⁺ cations (NaMt and Fe(II)Mt), acid activated bentonites and hydrotalcite were used as clay catalysts. Surface interaction and adsorption on the clay surface were found to govern the catalyst dispersion in aqueous media and both activity and selectivity in ozonation. These catalysts' features were correlated with the ecotoxicity of ozonised reaction mixtures as expressed in terms of mortality rates of Artemia salina. DAZ and DCF display specific intrinsic ecotoxicity that evolves differently during ozonation according to the catalyst. The ecotoxicity was found to strongly depend on the distribution of the ozonation intermediates, which, in turn, was narrowly correlated with the acid-base properties of the catalyst surface. These valuable findings allow the prediction of the behaviour of the clay-containing media in natural remediation.

Titanium dioxide based nanocomposites - Current trends and emerging strategies for the photocatalytic degradation of ruinous environmental pollutants

Many ruinous pollutants are omnipresent in the environment and among them; pesticides are xenobiotic and pose to be a bio-recalcitrance. Their detrimental ecological and environmental impacts attract attention of environmental excerpts and the surge of stringent regulations have endows the need of a technically feasible treatment. This critical review emphasizes about the occurrence, abundance and fate of structurally distinct pesticides in different environment. The practiced remedial strategies and in particular, the advanced oxidation processes (AOPs) those utilize the photo-catalytic properties of nano-composites for the degradation of pollutants are critically discussed. Photo-catalytic degradation utilizes many composite materials at nano-scale level, wherein synthesis of nano-composites with appropriate precursors and other adjoining functional moieties are of prime importance. Therefore, suitable starter materials along with the reaction conditions are prerequisite for effectively tailoring the nano-composites. The aforementioned aspects and their customized applications are critically discussed. The associated challenges, opportunities and process economics of degradation using photo-catalytic AOP techniques are highlighted and in addition, the review tries to explain how best the photo-degradation can be a stand-alone tool with a societal importance. Conclusively, the future prospects for undertaking new researches in photo-catalytic breakdown of pollutants that can be judiciously sustainable.

A novel composite anode via immobilizing of Ce-doped PbO2 on CoTiO3 for efficiently electrocatalytic degradation of dye

The exploitation of efficient electrocatalyst is significantly important for degradation of refractory organic pollutants. Herein, a novel Ti/CoTiO₃/Ce-PbO₂ composite electrocatalyst (abbreviated as CTO/CP) is successfully constructed via facile consecutive immersion pyrolysis and electro-deposition method and then systematically characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FT-IR), energy dispersive spectroscopy (EDS) and near infrared chemical imaging (NIR-CI). Importantly, the electrochemical measurements demonstrate that the CTO/CP possesses numerous prominent properties such as lower charge transfer resistance, larger electroactive area, higher oxygen evolution potential than those of the pristine Ti/CoTiO₃ (CTO) and Ti/Ce-PbO₂ (CP). Thereby, the CTO/CP exhibits an enhanced electrocatalytic degradation performance with the degradation efficiency as high as 90.0% and COD removal rate of 88.3% at 180 min for the optimal CTO/CP (denoted as 10 layers of CTO and 1 h electrodeposition of CP), in which the ·OH is the major reactive species. Additionally, the optimal CTO/CP also shows a higher ICE/ACE together with lower EEC and desirable stability, universal applicability for many different dyes and reusability. Overall, this work offers a promising approach for enhancing the electrocatalytic properties of CTO via introducing CP.

Environmental Occurrence, Toxicity Concerns, and Degradation of Diazinon Using a Microbial System

Diazinon is an organophosphorus pesticide widely used to control cabbage insects, cotton aphids and underground pests. The continuous application of diazinon in agricultural activities has caused both ecological risk and biological hazards in the environment. Diazinon can be degraded via physical and chemical methods such as photocatalysis, adsorption and advanced oxidation. The microbial degradation of diazinon is found to be more effective than physicochemical methods for its complete clean-up from contaminated soil and water environments. The microbial strains belonging to Ochrobactrum sp., Stenotrophomonas sp., Lactobacillus brevis, Serratia marcescens, Aspergillus niger, Rhodotorula glutinis, and Rhodotorula rubra were found to be very promising for the ecofriendly removal of diazinon. The degradation pathways of diazinon and the fate of several metabolites were investigated. In addition, a variety of diazinon-degrading enzymes, such as hydrolase, acid phosphatase, laccase, cytochrome P450, and flavin monooxygenase were also discovered to play a crucial role in the biodegradation of diazinon. However, many unanswered questions still exist regarding the environmental fate and degradation mechanisms of this pesticide. The catalytic mechanisms responsible for enzymatic degradation remain unexplained, and ecotechnological techniques need to be applied to gain a comprehensive understanding of these issues. Hence, this review article provides in-depth information about the impact and toxicity of diazinon in living systems and discusses the developed ecotechnological remedial methods used for the effective biodegradation of diazinon in a contaminated environment.

Research Progress and Application of Single-Atom Catalysts: A Review

Due to excellent performance properties such as strong activity and high selectivity, single-atom catalysts have been widely used in various catalytic reactions. Exploring the application of single-atom catalysts and elucidating their reaction mechanism has become a hot area of research. This article first introduces the structure and characteristics of single-atom catalysts, and then reviews recent preparation methods, characterization techniques, and applications of single-atom catalysts, including their application potential in electrochemistry and photocatalytic reactions. Finally, application prospects and future development directions of single-atom catalysts are outlined.

Optimization of UV-Electroproxone procedure for treatment of landfill leachate: the study of energy consumption

With increased population, treatment of solid waste landfill and its leachate is of major concern. Municipal landfill leachate shows variable, heterogeneous and incontrollable characteristics and contains wide range highly concentrated organic and inorganic compounds, in which hampers the application of a solo method in its treatment. Among different approaches, biological treatment can be used, however it is not effective enough to elimination all refractory organics, containing fulvic-like and humic-like substance. In this experimental study, the UV Electroperoxone process as a hybrid procedure has been employed to treat landfill leachate. The effect of various parameters such as pH, electrical current density, ozone concentration, and reaction time were optimized using central composite design (CCD). In the model fitting, the quadratic model with a P-Value less than 0.5 was suggested (< 0.0001). The R², R² adj, and R² pre were determined equal to 0.98,0.96, and 0.91 respectively. Based on the software prediction, the process can remove 83% of initial COD, in the optimum condition of pH = 5.6, ozone concentration of 29.1 mg/l. min, the current density of 74.7 mA/cm², and process time of 98.6 min. In the optimum condition, 55/33 mM H₂O₂ was generated through electrochemical mechanism. A combination of ozonation, photolysis and electrolysis mechanism in this hybrid process increases COD efficiency removal up 29 percent which is higher than the sum of separated mechanisms. Kinetic study also demonstrated that the UV-EPP process follows pseudo-first order kinetics (R² = 0.99). Based on our results, the UV-EPP process can be informed as an operative technique for treatment of old landfills leachates.

Towards Computer-Aided Graphene Covered TiO2-Cu/(CuxOy) Composite Design for the Purpose of Photoinduced Hydrogen Evolution

In search a hydrogen source, we synthesized TiO2-Cu-graphene composite photocatalyst for hydrogen evolution. The catalyst is a new and unique material as it consists of copper-decorated TiO2 particles covered tightly in graphene and obtained in a fluidized bed reactor. Both, reduction of copper from Cu(CH3COO) at the surface of TiO2 particles and covering of TiO2-Cu in graphene thin layer by Chemical Vapour Deposition (CVD) were performed subsequently in the flow reactor by manipulating the gas composition. Obtained photocatalysts were tested in regard to hydrogen generation from photo-induced water conversion with methanol as sacrificial agent. The hydrogen generation rate for the most active sample reached 2296.27 µmol H2 h−1 gcat−1. Combining experimental and computational approaches enabled to define the optimum combination of the synthesis parameters resulting in the highest photocatalytic activity for water splitting for green hydrogen production. The results indicate that the major factor affecting hydrogen production is temperature of the TiO2-Cu-graphene composite synthesis which in turn is inversely correlated to photoactivity.

Heterogeneous electro-Fenton process for degradation of bisphenol A using a new graphene/cobalt ferrite hybrid catalyst

A simple, efficient, environmentally friendly, and inexpensive synthesis route was developed to obtain a magnetic nano-hybrid (GH) based on graphene and cobalt ferrite. Water with a high content of natural organic matter (NOM) was used as solvent and a source of carbon. The presence of NOM in the composition of GH was confirmed by FTIR and Raman spectroscopy, which evidenced the formation of graphene, as also corroborated by XRD analyses. The diffractograms and TEM images showed the formation of a hybrid nanomaterial composed of graphene and cobalt ferrite, with crystallite and particle sizes of 0.83 and 4.0 nm, respectively. The heterogeneous electro-Fenton process (EF-GH) achieved 100% degradation of bisphenol A (BPA) in 50 min, with 80% mineralization in 7 h, at pH 7, using a current density of 33.3 mA cm^-2. The high catalytic performance was achieved at neutral pH, enabling substantial reduction of the costs of treatment processes. This work contributes to understanding the role of NOM in the synthesis of a magnetic nano-hybrid based on graphene and cobalt ferrite, for use in heterogeneous catalysis. This nano-hybrid has excellent potential for application in the degradation of persistent organic pollutants found in aquatic environments.

Comparison of Three Catalytic Processes in Degradation of HPAM by tBu-TPyzPzCo

The present study describes a two-step synthesis process for the cobalt complex of tetra-2,3-(5,6-di-tert-butyl-pyrazino) porphyrazine (tBu-TPyzPzCo). The product was ultrasonically impregnated onto carbon black (CB) to prepare a supported catalyst (tBu-TPyzPzCo/CB). We built a split photoelectric catalytic device to test the performance of photocatalytic, electrocatalytic and photoelectrocatalytic degradation of partially hydrolyzed polyacrylamide (HPAM). The results confirm that HPAM exhibited more efficient degradation in the presence of a supporting catalyst using the photoelectrocatalytic process than by photocatalytic or electrocatalytic oxidation—or even the sum of the two in saline water. The photoelectrocatalytic reaction confirmed that the process conforms to quasi-first order reaction kinetics, while the reaction rate constants were 6.03 times that of photocatalysis and 3.97 times that of electrocatalysis. We also compared the energy consumption of the three processes and found that the photoelectrocatalytic process has the highest energy efficiency.

Electrochemical removal of diazinon insecticide in aqueous solution by Pb/β-PbO2 anode. Effect of parameters and optimization using response surface methodology

Diazinon is one of the most extensively used organophosphorus pesticides that is used against a variety of agricultural pests and disease vectors and is resistant to biodegradation; its release into the environment is a severe environmental concern due to their widespread use. The aim of this study was to investigate the electrochemical removal of diazinon insecticides from aqueous solutions and to optimize the process by response surface methodology (RSM). This is an experimental study that was performed on a laboratory scale and in a batch mood. scanning electron microscopy, energy dispersive X-ray, and X-ray diffraction analyses were performed to accurately evaluate and characterize the coated electrode. The central composite design (CCD) was used to investigate the influence of pH, electrolysis time, diazinon concentration, and current density, as well as the effect of their interaction on the removal of diazinon during the electrochemical process. The results showed that by increasing electrolysis time and current density and decreasing diazinon pH and concentration, diazinon removal efficiency increased. According to the results, Na₂ SO₄ was selected as the supporting electrolyte with the highest degradation efficiency (97.88%) compared to the other two compounds (NaCl and NaNO₃ ). The linear regression coefficient (R² ) between experiments and different response values ​​in the model was .99. The results showed that the amount of AOS in the effluent of the three-dimensional electrochemical process was increased from 0.06 to 1.22 and the COD/TOC ratio decreased from 2.62 to 1.85, respectively; this indicates the biodegradability of the diazinon insecticide through the electrochemical system. The removal efficiency of COD and TOC in optimum condition was 85.78% and 79.86%, respectively. In general, the electrochemical process using Pb/β-PbO₂ electrode compared to other methods can be used as a suitable and reliable method for the treatment of effluents containing chemical toxins such as diazinon. PRACTITIONER POINTS: Electrochemical degradation of diazinon insecticide using Pb/β-PbO₂ anode. Effect of operating parameters on electrodegradation diazinon insecticide in electrochemical processes using Pb/β-PbO₂ anode. Biodegradability study of diazinon insecticide electrodegradation using Pb/β-PbO₂ anode. Optimization operating parameters using central composite design (CCD).

Enhanced photocatalytic activity of a visible-light-driven ternary WO3/Ag/Ag3PO4 heterojunction: a discussion on electron transfer mechanisms

WO3/Ag3PO4 with different weight ratios were prepared by ultrasonic assisted two-step deposition method. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence spectroscopy (PL) and transmission electron microscopy (TEM). The photocatalytic activities of all samples were evaluated by the degradation of rhodamine B (RhB) under visible light irradiation. WA-60 shows the highest photocatalytic activity in the WA-x series composite, while the photocatalytic activity of WAA-60 is the best among all samples. The free radical trapping experiments show that photogenerated holes (h+) are the main active species. The Ag nanoparticles produced by the decomposition of Ag3PO4 are located at the interface of Ag3PO4/WO3, which promotes the separation efficiency of photogenerated electrons and holes. To further explain the photocatalytic mechanism, electrochemical and physical tests are introduced to explore the flow of electrons inside the catalyst.

The catalytic ozonation of diazinon using nano-MgO@CNT@Gr as a new heterogenous catalyst: the optimization of effective factors by response surface methodology

In this research, the degradation of the insecticide diazinon was studied using a new hybrid catalyst consisting of magnesium oxide nanoparticles (nano-MgO), carbon nanotubes (CNTs), and graphite (Gr), nano-MgO@CNT@Gr, under various experimental conditions. This study shows the optimization of the nano-MgO@CNT@Gr/O3 process for diazinon degradation in aqueous solutions. Box-Behnken experimental design (BBD) and response surface methodology (RSM) were used to assess and optimize the solo effects and interactions of four variables, pH, catalyst loading, reaction time, and initial diazinon concentration, during the nano-MgO@CNT@Gr/O3 process. Analysis of regression revealed an adequate fit of the experimental results with a quadratic model, with R 2 > 0.91. Following the collection of analysis of variance (ANOVA) results, pH, catalyst loading, and reaction time were seen to have significant positive effects, whereas the concentration of diazinon had a considerable negative impact on diazinon removal via catalytic ozonation. The four variables for maximum diazinon removal were found to be optimum (82.43%) at the following levels: reaction time, 15 min; pH, 10; catalyst dosage, 1.5 g L-1; and diazinon concentration, 10 mg L-1. The degradation of diazinon gave six kinds of by-products. The mechanism of diazinon decomposition was considered on the basis of the identified by-products. According to these results, the nano-MgO@CNT@Gr/O3 process could be an applicable technique for the treatment of diazinon-containing wastewater.

Systematic comparison of sono-synthesized Ce-, La- and Ho-doped ZnO nanoparticles and using the optimum catalyst in a visible light assisted continuous sono-photocatalytic membrane reactor

In the present work, La-ZnO, Ho-ZnO and Ce-ZnO nanoparticles were synthesized by sonochemical method to use as catalysts in visible light photocatalysis, sono-photocatalysis and visible light sono-photocatalysis/membrane separation (SPMS) processes for degradation of an organic pollutant. The effect of doping source, mass ratio of doping source to the precursor of ZnO synthesis, pH, sonication temperature and time, and calcination temperature and time was investigated in visible light photocatalytic activity of the prepared lanthanides-doped ZnO nanoparticles using Taguchi design. The optimum conditions for the nanoparticles synthesis were obtained at 8 wt% of cerium nitrate, pH 10, sonication time for 1 h at 60 °C and calcination for 3 h at 300 °C. FE-SEM, EDS, XRD, PL and DRS analyzes were used to identify the characteristics of Ce-ZnO as the optimum catalyst. The Ce-ZnO nanoparticles were used to remove Reactive Orange 29 (RO29) solution via sono-photocatalysis process under the visible light irradiation. The effect of initial pH of solution, catalyst dosage, light intensity (power of applied lamp(s)), initial concentrations of inorganic salts such as Na₂CO₃, NaCl and Na₂SO₄ on the decolorization efficiency was investigated. Finally, a continuous flow visible light SPMS reactor was used in the presence of Ce-ZnO catalyst and polypropylene hollow fiber membrane for treatment of dye solution. In the best conditions of SPMS reactor, 97.84% of dye removal was achieved. GC-Mass, COD and TOC analyses were used to approve degradation and mineralization of RO29 using the SPMS process. Moreover, the prepared Ce-ZnO nanocomposite was shown the favorable antibacterial behavior against positive and negative bacteria.