Oxygen functionalized graphitic carbon nitride as an efficient metal-free ozonation catalyst for atrazine removal: Performance and mechanism

Emerging technologies for the removal of pesticides from contaminated soils and their reuse in agriculture

Pesticides are becoming more prevalent in agriculture to protect crops and increase crop yields. However, nearly all pesticides used for this purpose reach non-target crops and remain as residues for extended periods. Contamination of soil by widespread pesticide use, as well as its toxicity to humans and other living organisms, is a global concern. This has prompted us to find solutions and develop alternative remediation technologies for sustainable management. This article reviews recent technological developments for remediating pesticides from contaminated soil, focusing on the following major points: (1) The application of various pesticide types and their properties, the sources of pesticides related to soil pollution, their transport and distribution, their fate, the impact on soil and human health, and the extrinsic and intrinsic factors that affect the remediation process are the main points of focus. (2) Sustainable pesticide degradation mechanisms and various emerging nano- and bioelectrochemical soil remediation technologies. (3) The feasible and long-term sustainable research and development approaches that are required for on-site pesticide removal from soils, as well as prospects for applying them directly in agricultural fields. In this critical analysis, we found that bioremediation technology has the potential for up to 90% pesticide removal from the soil. The complete removal of pesticides through a single biological treatment approach is still a challenging task; however, the combination of electrochemical oxidation and bioelectrochemical system approaches can achieve the complete removal of pesticides from soil. Further research is required to remove pesticides directly from soils in agricultural fields on a large-scale.

Unveiling Versatile Applications and Toxicity Considerations of Graphitic Carbon Nitride

Metal-free, low-cost, organic photocatalytic graphitic carbon nitride (g-C3N4) has become a promising and impressive material in numerous scientific fields due to its unique physical and chemical properties. As a semiconductor with a suitable band gap of ~2.7 eV, g-C3N4 is an active photocatalytic material even after irradiation with visible light. However, information regarding the toxicity of g-C3N4 is not extensively documented and there is not a comprehensive understanding of its potential adverse effects on human health or the environment. In this context, the term "toxicity" can be perceived in both a positive and a negative light, depending on whether it serves as a benefit or poses a potential risk. This review shows the applications of g-C3N4 in sensorics, electrochemistry, photocatalysis, and biomedical approaches while pointing out the potential risks of its toxicity, especially in human and environmental health. Finally, the future perspective of g-C3N4 research is addressed, highlighting the need for a comprehensive understanding of the toxicity of this material to provide safe and effective applications in various fields.

Microbial lipid synthesis based on visible light-driven oxygen doped-graphitic carbon nitride /oleaginous yeast hybrid system

The use of solar energy and heterotrophic microbes to synthesize microbial lipids is a promising strategy to solve energy crisis and reduce CO2 emissions. In this study, a photocatalyst, oxygen-doped graphitic carbon nitride (O-g-C3N4), was synthesized and combined with an oleaginous yeast strain, Cutaneotrichosporon dermatis ZZ-46, to construct a photocatalyst-microbe hybrid (PMH) system. Under illumination, the lipid yield of the PMH system reached 1.61 g/L after 96 h (87 % higher than that of control). NADPH/NADP+ ratio of ZZ-46 cells in the PMH system increased. Metabolomics results revealed that glutathione generation was increased, and the fatty acid decomposition pathway in ZZ-46 cells was inhibited in the PMH system. This study provides a new approach for the synthesis of microbial lipids based on solar energy and heterotrophic microbes.

Flexible solid-state Zn-air battery based on polymer-oxygen-functionalized g-C3N4 composite membrane

Personalized healthcare devices require an energy storage system that is flexible and has good mechanical strength and stability for long periods. Zn-air batteries show promise as an alternative to Li-air batteries for this purpose. Zn-air batteries with a high theoretical specific energy density of 1350 W h kg-1 have the potential to replace other metal-air batteries but faces the challenges, such as dendrite formation and Zn corrosion, hindering their successful commercialization. In this work, we report the design and performance optimization of a solid-state flexible Zn-air battery with superior performance and good mechanical property. In addition, we focused on the development of a gel-polymer composite membrane as the electrolyte. The main advantage of the flexible electrolyte is its optimum combination of good ionic conductivity and mechanical strength. Thus, we attempted to address the above-mentioned issues by modifying poly(vinyl alcohol) (PVA) with o-g-C3N4 through the in situ formation of a composite. The interaction between the functional groups of o-g-C3N4 and PVA increased the conductivity without compromising the mechanical behavior of the composite. According to the optimization of the composite composition, it was concluded that 0.32 wt% o-g-C3N4 in PVA showed the highest conductivity and excellent mechanical strength (increase from 25 MPa for pristine PVA membrane to 35 MPa for g-C3N4-PVA composite membrane). The performance of the solid-state battery was better (40 hours) than the standard PVA KOH (13 hours) membrane. Moreover, the stability of the battery was retained at various bending angles, demonstrating its potential to be used in flexible electronic devices.

Acid-induced tubular g-C3N4 for the selective generation of singlet oxygen by energy transfer: Implications for the photocatalytic degradation of parabens in real water environments

Parabens are widely present in aquatic environments and pose potential health risk. Although great progress has been made in the field of the photocatalytic degradation of parabens, the powerful Coulomb interactions between electrons and holes are the major limitations to photocatalytic performance. Hence, acid-induced tubular g-C3N4 (AcTCN) was prepared and applied for the removal of parabens from a real water environment. AcTCN not only increased the specific surface area and light absorption capacity, but also selectively generated 1O2 via an energy transfer-mediated oxygen activation pathway. The 1O2 yield of AcTCN was 11.8 times higher than that of g-C3N4. AcTCN exhibited remarkable removal efficiencies for parabens depending on the length of the alkyl group. Furthermore, the rate constants (k values) of parabens in ultrapure water were higher than those in tap and river water because of the presence of organic and inorganic species in real water environments. Two possible pathways for the photocatalytic degradation of parabens are proposed based on the identification of intermediates and theoretical calculations. In summary, this study offers theoretical support for the efficient enhancement of the photocatalytic performance of g-C3N4 for the removal of parabens in real water environments.

Treatment of atrazine-containing wastewater by algae-bacteria consortia: Signal transmission and metabolic mechanism

Atrazine is a toxic endocrine disruptor. Biological treatment methods are considered to be effective. In the present study, a modified version of the algae-bacteria consortia (ABC) was established and a control was simultaneously set up to investigate the synergistic relationship between bacteria and algae and the mechanism by which atrazine is metabolized by those microorganisms. The total nitrogen (TN) removal efficiency of the ABC reached 89.24% and the atrazine concentration was reduced to below the level recommended by the Environment Protection Agency (EPA) regulatory standards within 25 days. The protein signal released from the extracellular polymeric substances (EPS) secreted by the microorganisms triggered the resistance mechanism of the algae, and the conversion of humic acid to fulvic acid and electron transfer constituted the synergistic mechanism between the bacteria and algae. The mechanism by which atrazine is metabolized by the ABC mainly consists of hydrogen bonding, H-pi interactions, and cation exchange with atzA for hydrolysis, followed by a reaction with atzC for decomposition to non-toxic cyanuric acid. Proteobacteria was the dominant phylum for bacterial community evolution under atrazine stress, and the analysis revealed that the removal of atrazine within the ABC was mainly dependent on the proportion of Proteobacteria and the expression of degradation genes (p < 0.01). EPS played a major role in the removal of atrazine within the single bacteria group (p < 0.01).

Catalytic ozonation of phenol by ZnFe2O4/ZnNCN: performance and mechanism

A novel magnetic catalyst was synthesized and applied in heterogeneous catalytic ozonation process. The ZnFe₂O₄/ZnNCN material was synthesized by hydrothermal and high-temperature calcination method and characterized by XPS, XRD, FTIR, VSM, and SEM techniques. In the system of O₃/ZnFe₂O₄/ZnNCN, the removal rates of phenol and chemical oxygen demand (COD) reached 93% and 43% at 60 min. Further analysis shows that ZnFe₂O₄/ZnNCN has a significant catalytic effect on O₃, which is demonstrated by the first-order kinetic constant being 1.93 times than O₃ alone. The catalyst exhibits excellent cycling stability during repeated catalytic ozonation process and can be fully recycled under an applied magnetic field. The role of hydrogen peroxide (H₂O₂) and surface hydroxyl groups was investigated, and a mechanism for catalytic ozonation was proposed. This work not only builds an efficient catalytic ozonation system, but also provides a potential modification strategy for spinel oxides.

Recent Developments in Activated Carbon Catalysts Based on Pore Size Regulation in the Application of Catalytic Ozonation

Due to its highly developed pore structure and large specific surface area, activated carbon is often used as a catalyst or catalyst carrier in catalytic ozonation. Although the pore structure of activated carbon plays a significant role in the treatment of wastewater and the mass transfer of ozone molecules, the effect is complicated and unclear. Because different application scenarios require catalysts with different pore structures, catalysts with appropriate pore structure characteristics should be developed. In this review, we systematically summarized the current adjustment methods for the pore structure of activated carbon, including raw material, carbonization, activation, modification, and loading. Then, based on the brief introduction of the application of activated carbon in catalytic ozonation, the effects of pore structure on catalytic ozonation and mass transfer are reviewed. Furthermore, we proposed that the effect of pore structure is mainly to provide catalytic active sites, promote free radical generation, and reduce mass transfer resistance. Therefore, large external surface area and reasonable pore size distribution are conducive to catalytic ozonation and mass transfer.

Degradation of Residual Herbicide Atrazine in Agri-Food and Washing Water

Atrazine, an herbicide used to control grassy and broadleaf weed, has become an essential part of agricultural crop protection tools. It is widely sprayed on corn, sorghum and sugar cane, with the attendant problems of its residues in agri-food and washing water. If ingested into humans, this residual atrazine can cause reproductive harm, developmental toxicity and carcinogenicity. It is therefore important to find clean and economical degradation processes for atrazine. In recent years, many physical, chemical and biological methods have been proposed to remove atrazine from the aquatic environment. This review introduces the research works of atrazine degradation in aqueous solutions by method classification. These methods are then compared by their advantages, disadvantages, and different degradation pathways of atrazine. Moreover, the existing toxicological experimental data for atrazine and its metabolites are summarized. Finally, the review concludes with directions for future research and major challenges to be addressed.

Two-dimensional layered carbon-based catalytic ozonation for water purification: Rational design of catalysts and an in-depth understanding of the interfacial reaction mechanism

This review renewed insight into the existing complex and contradictory mechanisms of catalytic ozonation by two-dimensional layered carbon-based materials (2D-LCMs) for degradation toxic refractory organics in aqueous solution. Migration and capture of active electrons are central to catalytic ozonation reactions, which was not studied or reviewed more clearly. Based on this perspective, the catalytic ozonation potential of 2D-LCMs synthesized by numerous methods is firstly contrasted to guide the design of subsequent carbon based-catalysts, and not limited to 2D-LCMs. Matching ROS to active sites is a key step in understanding the catalytic mechanism. The structure-activity relationships between reported numerous active sites and ROS evolution is then constructed. Result showed that OH could be produced by -OH, -C=O, -COOH groups, defective sites, immobilized metal atoms, doped heteroatoms and photo-induced electrons; and O₂^- could be produced by -OH groups and sp²-bonded carbon. The normalized model further be used to visually compare the contribution degree of various regulatory methods to performance improvement. More importantly, this review calls for 2D-LCMs-based catalytic ozonation to be studied without circumventing the issue of structural stability, which would lead to many proposals of catalysts and its involved catalytic reaction mechanism being meaningless.

Catalytic ozonation for the removal of reactive black 5 (RB-5) dye using zeolites modified with CuMn2O4/gC3N4 in a synergic electro flocculation-catalytic ozonation process

This study aims to investigate the decolourization efficiency of reactive black 5 (RB-5) dye by using CuMn₂O₄/gC₃N₄ coated zeolites (zeolite 4A) for the first time in a hybrid electro-flocculation-catalytic ozonation process. A comparison between various treatment options such as electro-flocculation, electro-flocculation in the presence of a catalyst, and catalytic ozonation in combination with electro-flocculation was explored. Moreover, the effect of different factors such as pH, time, catalyst dose, ozone dose, radical scavenger, and voltage has been studied in each treatment option mentioned earlier. The results indicated that the best treatment option was found to be catalytic ozonation in combination with electro-flocculation with removal efficiency (RE) of 90.31% at pH 10 after 30 min of the treatment process. The hydroxyl radical scavenger effect indicated that the synergistic catalytic process follows a radical mechanism. It is therefore concluded that CuMn₂O₄/gC₃N₄-zeolite catalysts in synergic electro-flocculation-catalytic ozonation process may be effectively used for the treatment of textile wastewaters.

Simultaneous electrochemical oxidation and ferrate generation for the treatment of atrazine: A novel process for water treatment applications

A novel process involving the simultaneous electrochemical-oxidation (EO) and electrosynthesis of ferrate has been investigated for the treatment of the commonly detected and recalcitrant pesticide, atrazine. The present study considered the electrosynthesis of ferrate, in neutral pH, using low concentration iron (Fe²⁺) representative of raw water levels and its subsequent effect on atrazine degradation. Ferrate synthesis was unaffected by current density (10-80 mA cm^-2), indicating mass transport limitations. Synthesis was affected by the initial iron concentration, whereby 0.051, 0.108 and 0.332 mg L^-1 was generated with an Fe²⁺ concentration of 0.5, 1.0 and 3.0 mg L^-1, respectively. When operating under simultaneous EO and ferrate oxidation, atrazine degradation exceeded that of a solely EO process. From an initial concentration of 2.00 mg L^-1, atrazine was degraded to 1.34, 1.05 and 0.51 mg L^-1 during 10, 40 and 80 mA cm^-2, characterised by pseudo-first-order kinetics. Degradation with electrochemically-generated ferrate could be described by second-order kinetics, and yielded a degradation rate constant of 23.5 M^-1 s^-1. The effect of natural organic matter (NOM) on atrazine degradation was also investigated. Ferrate was observed to be mostly scavenged by resorcinol, a representative NOM compound, having a second-order reaction rate constant of 9.71 × 102 M^-1 s^-1.

Recent advances in application of graphitic carbon nitride-based catalysts for degrading organic contaminants in water through advanced oxidation processes beyond photocatalysis: A critical review

Advanced oxidation processes (AOPs) have attracted much interest in the field of water treatment owing to their high removal efficiency for refractory organic contaminants. Graphitic carbon nitride (g-C₃N₄)-based catalysts with high performance and cost effectiveness are promising heterogeneous catalysts for AOPs. Most research on g-C₃N₄-based catalysts focuses on photocatalytic oxidation, but increasingly researchers are paying attention to the application of g-C₃N₄-based catalysts in other AOPs beyond photocatalysis. This review aims to concisely highlight recent state-of-the-art progress of g-C₃N₄-based catalysts in AOPs beyond photocatalysis. Emphasis is made on the application of g-C₃N₄-based catalysts in three classical AOPs including Fenton-based processes, catalytic ozonation and persulfates activation. The catalytic performance and involved mechanism of g-C₃N₄-based catalysts in these AOPs are discussed in detail. Meanwhile, the effect of water chemistry including pH, water temperature, natural organic matter, inorganic anions and dissolved oxygen on the catalytic performance of g-C₃N₄-based catalysts are summarized. Moreover, the reusability, stability and toxicity of g-C₃N₄-based catalysts in water treatment are also mentioned. Lastly, perspectives on the major challenges and opportunities of g-C₃N₄-based catalysts in these AOPs are proposed for better developments in the future research.

Doping of Graphitic Carbon Nitride with Non-Metal Elements and Its Applications in Photocatalysis

This review outlines the latest research into the design of graphitic carbon nitride (g-C3N4) with non-metal elements. The emphasis is put on modulation of composition and morphology of g-C3N4 doped with oxygen, sulfur, phosphor, nitrogen, carbon as well as nitrogen and carbon vacancies. Typically, the various methods of non-metal elements introducing in g-C3N4 have been explored to simultaneously tune the textural and electronic properties of g-C3N4 for improving its response to the entire visible light range, facilitating a charge separation, and prolonging a charge carrier lifetime. The application fields of such doped graphitic carbon nitride are summarized into three categories: CO2 reduction, H2-evolution, and organic contaminants degradation. This review shows some main directions and affords to design the g-C3N4 doping with non-metal elements for real photocatalytic applications.

Modification of Graphitic Carbon Nitride with Hydrogen Peroxide

Graphitic carbon nitride (GCN) was synthetized by heating melamine and then it was thermally exfoliated for 1-3 h in air. Both bulk and exfoliated GCN nanomaterials were treated in the 10-30% aqueous solutions of H₂O₂ for us to study their modification. The light absorption properties were observed by the reddish color and the red-shifts of their UV-Vis spectra. The content of oxygen increased and hydrogen peroxide was supposed to partially oxidize C-OH groups to C=O ones and to form C-O-C groups instead of edge C-NH-C ones. The GCN structure changes were not observed. However, a surface modification of the GCN materials was recognized by their changed photocatalytic activities tested by means of Acid Orange 7 (AO7) and Rhodamines B (RhB), zeta-potentials, and neutralization titration curves.

Catalytic ozonation for water and wastewater treatment: Recent advances and perspective

Ozonation process has been widely applied in water and wastewater treatment, such as for disinfection, for degradation of toxic organic pollutants. However, the utilization efficiency of ozone is low and the mineralization of organic pollutants by ozone oxidation is ineffective, and some toxic disinfection byproducts (DBPs) may be formed during ozonation process. Catalytic ozonation process can overcome these problems to some extent, which has received increasing attention in recent years. During catalytic ozonation, catalysts can promote O₃ decomposition and generate active free radicals, which can enhance the degradation and mineralization of organic pollutants. In this paper, the history of ozonation application in water treatment was briefly reviewed. The properties of the ozone molecule, the ozonation types and several ozone-based water treatment processes were briefly introduced. Various catalysts for catalytic ozonation, including homogeneous and heterogeneous catalysts, such as metal ions, metal oxidizes, carbon-based materials and their possible catalytic mechanisms were analyzed and summarized in detail. Furthermore, some inconsistent results of previous research on catalytic ozonation were analyzed and discussed. The application of catalytic oxidation for the degradation of toxic organic pollutants, including phenols, pesticides, dyes, pharmaceuticals and others, was summarized. Finally, several key aspects of catalytic ozonation, such as pH effect, the catalyst performance, the catalytic mechanism were proposed, to which more attention should be paid in future study.

A Review on Recent Treatment Technology for Herbicide Atrazine in Contaminated Environment

Atrazine is a kind of triazine herbicide that is widely used for weed control due to its good weeding effect and low price. The study of atrazine removal from the environment is of great significance due to the stable structure, difficult degradation, long residence time in environment, and toxicity on the organism and human beings. Therefore, a number of processing technologies are developed and widely employed for atrazine degradation, such as adsorption, photochemical catalysis, biodegradation, etc. In this article, with our previous research work, the progresses of researches about the treatment technology of atrazine are systematically reviewed, which includes the four main aspects of physicochemical, chemical, biological, and material-microbial-integrated aspects. The advantages and disadvantages of various methods are summarized and the degradation mechanisms are also evaluated. Specially, recent advanced technologies, both plant-microbial remediation and the material-microbial-integrated method, have been highlighted on atrazine degradation. Among them, the plant-microbial remediation is based on the combined system of soil-plant-microbes, and the material-microbial-integrated method is based on the synergistic effect of materials and microorganisms. Additionally, future research needs to focus on the excellent removal effect and low environmental impact of functional materials, and the coordination processing of two or more technologies for atrazine removal is also highlighted.

Recent Strategies for Hydrogen Peroxide Production by Metal-Free Carbon Nitride Photocatalysts

Hydrogen peroxide (H2O2) is a chemical which has gained wide importance in several industrial and research fields. Its mass production is mostly performed by the anthraquinone (AQ) oxidation reaction, leading to high energy consumption and significant generation of wastes. Other methods of synthesis found in the literature include the direct synthesis from oxygen and hydrogen. However, this H2O2 production process is prone to explosion hazard or undesirable by‑product generation. With the growing demand of H2O2, the development of cleaner and economically viable processes has been under intense investigation. Heterogeneous photocatalysis for H2O2 production has appeared as a promising alternative since it requires only an optical semiconductor, water, oxygen, and ideally solar light irradiation. Moreover, employing a metal-free semiconductor minimizes possible toxicity consequences and reinforces the sustainability of the process. The most studied metal‑free catalyst employed for H2O2 production is polymeric carbon nitride (CN). Several chemical and physical modifications over CN have been investigated together with the assessment of different sacrificial agents and light sources. This review shows the recent developments on CN materials design for enhancing the synthesis of H2O2, along with the proposed mechanisms of H2O2 production. Finally, the direct in situ generation of H2O2, when dealing with the photocatalytic synthesis of added-value organic compounds and water treatment, is discussed.

Band gap tuning of g-C3N4 via decoration with AgCl to expedite the photocatalytic degradation and mineralization of oxalic acid

A series of functional organic-metal AgCl-decorated graphitic carbon nitride (AgCl-CN_x) composites were synthesized and applied for the degradation of oxalic acid (OA) under visible light. The highest photocatalytic activity was achieved with AgCl decoration ratio of 1.0 (denoted as AgCl-CN_1.0). The pseudo-first-order constant for OA degradation was 0.0722 min^-1 with the mineralization efficiency of 90.80% after 60 min reaction in the photocatalytic process with AgCl-CN_1.0. A variety of characterization techniques including Brunauer-Emmett-Teller, X-ray diffraction, scanning electron microscope, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectra, ultraviolet-visible diffuse reflectance spectra, photoluminescence, and Mott-Schottky were utilized to elucidate the physicochemical, microstructure, and optical properties contributing to the improvement of the photocatalytic performance. The results showed that AgCl-CN_1.0 had an oblate flaky erythrocyte-like structure with a moderate band gap energy of ~3.00 eV. In addition, the effects of the key parameters (i.e., AgCl-CN_1.0 dosage, initial OA concentration, solution pH, and presence of natural organic matter) on OA degradation were systematically investigated. Radical scavenger experiments indicated that photogenerated holes, electrons, superoxide anion radicals, and hydroxyl radicals were the dominant reactive species. Moreover, AgCl-CN_1.0 exhibited excellent stability and reusability for OA degradation without detectable Ag⁺ release in the solution over multiple reaction cycles. The efficient OA mineralization could be mainly ascribed to the moderate specific surface area, increased numbers of active sites, and effective interfacial charge transfer of AgCl-CN_1.0. Overall, the AgCl-CN_1.0 composite was demonstrated to be a highly efficient, stable, and recoverable photocatalyst.

The use of nanovermiculite catalyst in the study of removal of the organic load and degradation of atrazine via ozone process in RPB reactor

The main objective of this study is the degradation of a synthetic solution of atrazine by a modified vermiculite catalyzed ozonation, in a rotating packed bed (RPB) reactor. A 0.5 L RPB reactor was used to perform the experiments, using a Central Composite Design (CCD) response surface to construct the quadratic model based on the factors: pH, catalyst concentration and reactor rotation frequency. The response variable was the removal of the organic load measured in terms of Chemical Oxygen Demand (COD). After the complete quadratic model was constructed through the response surface, the COD degradation process had an optimal removal of 41% under the following conditions: pH 8.0, rotation of 1150 rpm and catalyst concentration 0.66 g L^-1.