Flocculation of different types of combined contaminants of antibiotics and heavy metals by thermo-responsive flocculants with various architectures

Efficient removal of antibiotics from water by highly crosslinked metal-alginate particles: Preparation, isotherms, kinetics, and microbiological assay

Traces of antibiotics reaching aquatic environment lead to the emergence of antimicrobial resistance (AMR). The efficient removal of antibiotics (ATBs) traces from wastewater is essential to tackle the AMR. In this study, a novel solid-state crosslinking method of alginate (ALG) was developed and applied to specifically remove ATBs from water. A wide range of crosslinkers (Ca2+, Zn2+, Cu2+, Ni2+, Fe3+ and Al3+) was used and the crosslinking nature, density, and distribution were evidenced by FTIR, ICP-MS, and SEM-EDS. Compared with ionotropic gelation, the novel solid-state crosslinking method proved superior in term of ease of production, high crosslinking degree, and ATBs removal capacity. Fe-ALG and Zn-ALG showed high removal capacity of ciprofloxacin (356.5 mg/g and 928.6 mg/g) and doxycycline (90 mg/g and 690 mg/g), however, they were less effective toward amoxicillin (11.5 mg/g and 6 mg/g). Removal isotherms and kinetics followed type I and pseudo-second order suggesting a chemisorption removal mechanism. Fe-ALG was successfully regenerated with no loss in ATB removal capacity. The microbiological assay showed significant reductions of antibacterial activities after ATBs removal from water. Overall, metal-ALG systems obtained by solid-state crosslinking are promising for ATBs removal from wastewater giving the ease of production, high efficiency, regenerability, and scalability potential.

Theoretical study of the adsorption capacity of potentially toxic Cd2+, Pb2+, and Hg2+ ions in hemicellulose matrices

Hemicellulose is widely available in nature, is a sustainable resource and has a wide range of applications. Among them, adsorption stands out for the removal of potentially toxic ions. Thus, in the study, the adsorption of Cd2+, Pb2+ and Hg2+ ions in two hemicellulose matrices were elucidated through computational simulations using density functional theory. Molecular electrostatic potential and frontier molecular orbitals demonstrated whether the interactions could happen. Four interaction complexes were highlighted due to the interaction energy criteria, ΔEBind, ΔH and ΔG < 0.00 kcal mol-1, that is: Hm1… Pb (1); Hm2… Pb (3); Hm2…Cd (4) and Hm2…Hg (4) and the results show that they occur through physisorption. In structural parameter studies, interaction distances smaller than 3000 Å were identified, which ranged from 2.253 Å to 2.972 Å. From the analysis of the topological parameters of QTAIM, it was possible to characterize the intensities of the interactions, as well as their nature, which were partially covalent or electrostatic in nature. Finally, based on the theoretical results, it can be affirmed that the hemicellulose can interact with Cd2+, Pb2+ and Hg2+ ions, evidencing that this study can support further experimental essays to remove contaminants from effluents.

Removal of Pb (II) and Zn (II) in the mineral beneficiation wastewater by using cross-linked carboxymethyl starch-g-methacrylic acid as an effective flocculant

The cross-linked carboxymethyl starch-g-methacrylic acid (CCMS-g-MAA) was prepared by using grafting and micro-cross-linking in the one-pot preparation process. CCMS-g-MAA presented high removal capacity of Pb (II) of 57.13 mg/g at pH = 4 and high removal capacity of Zn (II) of 51.41 mg/g at pH = 5 by using a sample dosage of 0.68 g/L. Characterization results of FTIR, TG, and XRD illustrate that methacrylic acid and sodium tri-metaphosphate were successfully introduced into the structure of carboxymethyl starch. SEM characterization presented that the sample particles were amorphous aggregates with surface voids, which was favorable for the adsorption of heavy metal ions from wastewater. Adsorption isotherm results indicated that Freundlich equation could be better used to describe the adsorption process of metal ions on CCMS-g-MAA. The adsorption kinetic results indicated that the pseudo-second-order model is more suitable to describe this removal process. XPS results indicated that metal ions interacted with functional groups on the surface of flocculant, especially carboxyl groups. The removal process may be purposed that metal ions were adsorbed by porous material, and then combined with surface functional groups of the flocculant via electrostatic interaction, chelation or ion exchange. Subsequently, metal ions were separated from the wastewater with flocs precipitated in the bottom of solution via bridging and patching. The obtained results illustrated that CCMS-g-MAA was an effective material for the treatment of wastewater containing polymetallic ions besides mineral beneficiation wastewater supported by its excellent regeneration.

Influence of the Extraction Solution on the Removal of Heavy Metals from Polluted Soils

Soil pollution with heavy metals is a problem for the whole geosystem. The aim of the research is to identify new solutions for extracting heavy metals from polluted soils so that they can be further exploited. To this end, investigations of the physicochemical characteristics of the soil sample under study were carried out. Following the analyses, the soil was characterised as lute-coarse sand (UG) with a strongly acidic pH (4.67), a hygroscopicity coefficient (CH = 4.8% g/g), and a good supply of nutrients: nitrogen (Nt): 0.107%; mobile phosphorus (PAL): 6 mg kg-1 and mobile potassium (KAL): 26 mg kg-1, but is low in humus (2.12%). The metal content of the soil was determined by atomic absorption spectrometry (AAS), and the analyses showed high concentrations of metals (Pb: 27,660 mg kg-1; Cu: 5590 mg kg-1; Zn: 2199 mg kg-1; Cd: 11.68 mg kg-1; Cr: 146 mg kg-1). The removal of metals (Pb, Cu, Zn, Cd, and Cr) from polluted soil by different extraction agents (water, humus, malic acid, chitosan, and gluconic acid) was investigated. Metal extraction experiments were carried out in a continuous orbital rotation-oscillation stirrer at a solid/liquid/ (S/L ratio; g:mL) of 1:4, at two concentrations of extraction solution (1% and 3%), and at different stirring times (2, 4, 6, and 8 h). The yield of the extraction process is very low for all proposed extraction solutions. The maximum values of extraction efficiency are: 0.5% (Pb); 3.28% (Zn); and 5.72% (Cu). Higher values were obtained in the case of Cr (11.97%) in the variant of using humus 3% as an extraction solution at a stirring time of 6 h. In the investigated experimental conditions, the best removal efficiencies were obtained in the case of cadmium (26.71%) when using a 3% malic acid solution. In conclusion, it is considered that, from case to case, the type of extraction solution as well as the nature of the metal influence the mechanism of the depollution process, i.e., the capacity of the fine soil granules to free themselves from the pollutant metal that has adhered to them, and further research is considered necessary in the future.

A sustainable biosorption technique for treatment of industrial wastewater using snail shell dust (Bellamya bengalensis)

Water, an essential commodity available to mankind, is constantly under pollution threat. Industries are one of the major causative factors for its poor quality and therefore all organisms depending upon it, directly or indirectly are affected by various life-threatening problems. Thus, the treatment of discharge waste into the freshwater ecosystem is the dire need of the hour. The objective of the study is valorization of discarded snail shells for treatment of industrial wastewater. In the present study, industrial wastewater was treated using snail shell dust obtained from Bellamya bengalensis to assess change in water quality parameters. Various physico-chemical parameters like pH, total dissolved solids, electric conductivity, dissolved oxygen, biological oxygen demand, chemical oxygen demand, calcium, magnesium, total hardness, chlorides, bicarbonates, orthophosphates, sulfates, nitrates, and ammonia-N were assessed after its treatment with snail shell dust. Based on the present observation, it was concluded that all studied parameters except dissolved oxygen showed a remarkable decline in concentration after treatment with snail shell dust at the rate of 15 g per liter at the end of 4 days. Moreover, increased dissolved oxygen concentration also endorsed an enhancement in water quality. Statistical analysis through Pearson correlation and indices, viz., WQI (Water quality index) as well as Nemerow's Pollution index when applied to the present data, also supported an improvement in the water quality. The findings thus endorsed the utilization of snail shell dust as an eco-friendly technique and can be substituted as a sustainable method for the treatment of industrial wastewater.

Chitosan as an Outstanding Polysaccharide Improving Health-Commodities of Humans and Environmental Protection

Public health, production and preservation of food, development of environmentally friendly (cosmeto-)textiles and plastics, synthesis processes using green technology, and improvement of water quality, among other domains, can be controlled with the help of chitosan. It has been demonstrated that this biopolymer exhibits advantageous properties, such as biocompatibility, biodegradability, antimicrobial effect, mucoadhesive properties, film-forming capacity, elicitor of plant defenses, coagulant-flocculant ability, synergistic effect and adjuvant along with other substances and materials. In part, its versatility is attributed to the presence of ionizable and reactive primary amino groups that provide strong chemical interactions with small inorganic and organic substances, macromolecules, ions, and cell membranes/walls. Hence, chitosan has been used either to create new materials or to modify the properties of conventional materials applied on an industrial scale. Considering the relevance of strategic topics around the world, this review integrates recent studies and key background information constructed by different researchers designing chitosan-based materials with potential applications in the aforementioned concerns.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Synthesis and Characterization of TiO2 Nanotubes (TiO2-NTs) with Ag Silver Nanoparticles (Ag-NPs): Photocatalytic Performance for Wastewater Treatment under Visible Light

In this work, we present the influence of the decoration of TiO₂ nanotubes (TiO₂-NTs) with Ag silver nanoparticles (Ag-NPs) on the photocatalysis of emerging pollutants such as the antibiotic diclofenac sodium. The Ag-NPs were loaded onto the TiO₂-NTs by the anodization of metallic titanium foils. Diclofenac sodium is an emerging pollutant target of the pharmaceutical industry because of its negative environmental impact (high toxicity and confirmed carcinogenicity). The obtained Ag-NP/TiO₂-NT nanocomposites were characterized by X-ray diffraction (XRD), photoluminescence spectroscopy (PL), scanning electron microscopy (SEM), transmission spectroscopy (TEM), and X-ray photoelectron spectroscopy (XPS). In order to study the photocatalytic behavior of Ag-NPs/TiO₂-NTs with visible cold LEDs, the possible photocatalytic mechanism of antibiotic degradation with reactive species (O₂°⁻ and OH°) was detailed. Moreover, the Langmuir–Hinshelwood model was used to correlate the experimental results with the optimized catalyst. Likewise, reuse tests showed the chemical stability of the catalyst.

Novel strategy for controlling colloidal instability during the flocculation pretreatment of landfill leachate

Flocculation is an economical and effective pretreatment technology for landfill leachate. An iron salt flocculant is often used in landfill leachate pretreatment, but the flocs that are formed are affected by the operation sequence, which subsquently influences flocculation. This study selected three representative landfill leachates (i.e., mature landfill leachate (MLL), biologically treated landfill leachate (BTL), and nanofiltration concentrate leachate (NFCL)). The effect of different operation modes on the removal of organic matter from landfill leachate by flocculation was studied, and a strategy to control colloidal instability is put forward. The results revealed that adjusting the pH value to 9 using NaOH changes the zeta potential of leachate when the leachate and sludge are not separated, which affects electric neutralization in flocculation and colloidal stability. Furthermore, a part of the collected organic matter is released to the leachate again, leading to a decrease in the flocculation pretreatment effect. In this improved flocculation process, the leachate and sludge are first separated, and the pH value of the system is then adjusted to 9. The effect of OH^- on electric neutralization is avoided and the remaining Fe³⁺ can further remove organic matter from leachates. Finally, the UV₂₅₄ removal efficiencies of MLL, BTL, and NFCL increased by 20.38%, 28.67%, and 22.67%, respectively. In a full-scale application, i.e., an NFCL treatment facility, the UV₂₅₄ removal efficiency during long-term operation reached 87.50%. Therefore, the colloid instability control strategy this study proposes can provide theoretical and engineering references for the flocculation pretreatment of landfill leachate.

Simultaneous high-efficiency removal of sulfamethoxazole and zinc (II) from livestock and poultry breeding wastewater by a novel dual-functional bacterium, Bacillus sp. SDB4

The complex mixtures of antibiotics and heavy metals are commonly existed in livestock and poultry breeding wastewater. Effective and simultaneous removal of these toxic compounds by microorganisms, especially single strains, remains a considerable challenge. In this study, a novel functional strain SDB4, isolated from duck manure and identified as Bacillus sp., has been shown to possess high removal capabilities for both sulfamethoxazole (SMX) and Zn²⁺. The maximum removal efficiency achieved 73.97% for SMX and 84.06% for Zn²⁺ within 48 h in the single pollution system. It has great potential for eliminating SMX along with Zn²⁺, 78.45% of SMX and 52.91% of Zn²⁺ were removed in the 20 mg·L^-1 SMX and 100 mg·L^-1 Zn²⁺ binary system. Furthermore, the SMX-biotransformation capability of SDB4 was enhanced at low concentrations of Zn²⁺ (below 100 mg·L^-1). The SMX biotransformation and Zn²⁺ adsorption data fitted well with the pseudo-first-order kinetic model, indicating that the two pollutants were in accordance with the same removal rule. N⁴-acetyl-SMX was identified as the main stable transformation product during SMX removal. FTIR analyses revealed that OH, NH₂, C=O, C-N/N-H, and C-O-C played major roles in the adsorption of Zn²⁺. Our study of the dually functioning strain SDB4 provides a potential application for the simultaneous biological removal of antibiotics and heavy metals.

Heavy metal removal from aqueous solutions by chitosan-based magnetic composite flocculants

In this study, three magnetic flocculants with different chelating groups, namely, carboxymethyl chitosan-modified Fe₃O₄ flocculant (MC), acrylamide-grafted magnetic carboxymethyl chitosan flocculant (MCM), and 2-acrylamide-2-methylpropanesulfonic acid copolyacrylamide-grafted magnetic carboxymethyl chitosan flocculant (MCAA) were prepared, synthesized, and characterized by photopolymerization technology. They were applied to the flocculation removal of Cr(III), Co(II), and Pb(II). The effect of flocculation condition on the removal performance of Cr(III), Co(II), and Pb(II) was studied. Characterization results show that the three magnetic carboxymethyl chitosan-based flocculants have been successfully prepared with good magnetic induction properties. Flocculation results show that the removal rates of MC, MCM, and MCAA on Cr(III) are 51.79%, 82.33%, and 91.42%, respectively, under the conditions of 80 mg/L flocculant, pH value of 6, reaction time of 1.5 hr, G value of 200 s^-1, and precipitation magnetic field strength of 120 mT. The removal rates of Co(II) by MC, MCM, and MCAA are 54.33%, 84.99%, and 90.49%, respectively. The removal rates of Pb(II) by MC, MCM, and MCAA are 61.54%, 91.32%, and 95.74%, respectively. MCAA shows good flocculation performance in composite heavy metal-simulated wastewater. The magnetic carboxymethyl chitosan-based flocculant shows excellent flocculation performance in removing soluble heavy metals. This research provides guidance and ideas for the development of efficient and low-cost flocculation technology to remove heavy metals in wastewater.

Fly ash-, foundry sand-, clay-, and pumice-based metal oxide nanocomposites as green photocatalysts

Metal oxides possess exceptional physicochemical properties which make them ideal materials for critical photocatalytic applications. However, of major interest, their photocatalytic applications are hampered by several drawbacks, consisting of prompt charge recombination of charge carriers, low surface area, inactive under visible light, and inefficient as well as expensive post-treatment recovery. The immobilization of metal oxide semiconductors on materials possessing high binding strength eliminates the impractical and costly recovery of spent catalysts in large-scale operations. Notably, the synthesis of green material (ash, clay, foundry sand, and pumice)-based metal oxides could provide a synergistic effect of the superior adsorption capacity of supporting materials and the photocatalytic activity of metal oxides. This phenomenon significantly improves the overall degradation efficiency of emerging pollutants. Inspired by the novel concept of "treating waste with waste", this contribution highlights recent advances in the utilization of natural material (clay mineral and pumice)- and waste material (ash and foundry sand)-based metal oxide nanocomposites for photodegradation of various pollutants. First, principles, mechanism, challenges towards using metal oxide as photocatalysts, and immobilization techniques are systematically summarized. Then, sources, classifications, properties, and chemical composition of green materials are briefly described. Recent advances in the utilization of green materials-based metal oxide composites for the photodegradation of various pollutants are highlighted. Finally, in the further development of green materials-derived photocatalysts, we underlined the current gaps that are worthy of deeper research in the future.

The development of biomass-derived carbon-based photocatalysts for the visible-light-driven photodegradation of pollutants: a comprehensive review

Biomass-derived carbonaceous materials have recently attracted extensive interest on account of their exceptional physicochemical properties which make them promising candidates for various critical applications. Several achieved advances have been reported in the recent literature, mainly focusing on the areas of energy storage and conversion. There is no review dedicated specifically to the potential applications of biomass-derived carbon-based photocatalytic materials for environmental remediation using the visible spectral region. The excellent characteristics of carbon materials, such as good electronic conductivity, unique nanocrystal structures, inherent hydrophobicity, and the tunable surface characteristics, are fully compatible with diverse catalytic reactions including organic transformations and photocatalysis processes. Importantly, biomass-carbon-based materials are considered to be green and viable alternative photocatalysts due to their environmentally friendly and naturally abundant nature. This work aims to provide a comprehensive review of recent advances relating to the synthesis of biomass-derived carbon-based photocatalysts, focusing on their potential for the photodegradation of various pollutants. First, potential natural biomass sources, various synthetic routes, and the properties of carbon materials are systematically discussed. Recent advances in the production of biomass-carbon-based photocatalysts (including material design, mechanisms, and photocatalytic performance) are highlighted. Regarding ideas for the development of new biomass-derived photocatalysts, we outline research gaps that are worthy of further research in the future.

This review highlights recent advances relating to the synthesis of biomass-derived carbon-based photocatalysts in light of their potential use in the photodegradation of various pollutants.

Biopolymer-based flocculants: a review of recent technologies

Biopolymer-based flocculants have become a potential substitute for inorganic coagulants and synthetic organic flocculants due to their wide natural reserves, environmental friendliness, easy natural degradation, and high material safety. In recent years, with more and more attention to clean technologies, a lot of researches on the modification and application of biopolymer-based flocculants have been carried out. The present paper reviews the latest important information about the base materials of biopolymer-based flocculants, including chitosan, starch, cellulose, and lignin etc. This review also highlights the various modification methods of these base materials according to reaction types in detail. Via the recent researches, the flocculation mechanisms of biopolymer-based flocculants, such as adsorption, bridging, charge neutralization, net trapping, and sweeping, as well as, some other special mechanisms are comprehensively summarized. This paper also focuses on the water treatment conditions, the removal efficiency, and advantages of biopolymer-based flocculants in applications. Further, this review sheds light on the future perspectives of biopolymer-based flocculants, which may make progress in the sources of base materials, modification processes, multi-function, and deepening application researches. We believe that this review can guide the further researches and developments of biopolymer-based flocculants in the future, to develop them with a higher efficiency, a lower cost, more safety, and multi-function for more diversified applications. Graphical abstract.

Multi-functional rhodamine-based chitosan hydrogels as colorimetric Hg2+ adsorbents and pH-triggered biosensors

HYPOTHESIS

Water contamination from heavy metal ions is a major global environmental concern. Adsorbents based on biomaterials have been demonstrated to possess remarkable removal efficiency for metal ions, but the adsorption model of biosorbents is not clear and much efforts should be devoted to study the adsorption behaviors and understand the adsorption mechanism.

EXPERIMENTS

The multifunctional rhodamine-modified chitosan (RMC) hydrogel for Hg²⁺ adsorption with fluorescent turn-ON properties was fabricated through grafting the rhodamine-modified poly (ethylene glycol) benzaldehyde (RM-PEG) onto the hydrogel network serving as the fluorescence/colorimetric sensing receptor. The adsorption behaviors and colorimetric sensing mechanism of RMC hydrogel towards Hg²⁺ were investigated in detail.

FINDINGS

RMC hydrogel can remove more than 96.5% of Hg²⁺ from aqueous solution with significant fluorescence response and colorimetric change. The high adsorption selectivity and colorimetric sensing mechanism of RMC hydrogel towards Hg²⁺ can be explained by the hard and soft acid/base (HSAB) theory. The O atom in hydroxyl and carbonyl groups together with the N atom in amine/imine groups of RMC hydrogel play a vital role in the adsorption of Hg²⁺, while the colorimetric response and fluorescence enhancement of the hydrogel after adsorption are attributed to the specific spiro-lactam structure of rhodamine moieties. The adsorption isotherms and kinetics were investigated and well described by Freundlich isotherm and pseudo-second-order kinetic model. Furthermore, RM-PEG showed low cytotoxicity towards mouse embryonic fibroblast cells and RMC hydrogel can be used as a fluorescent pH indicator from 4.2 to 7.4, demonstrating the potential applications of RMC hydrogel in biological diagnosis.

Interaction of Carboxyalkylated Cellulose Nanocrystals and Antibiotics

Although antibiotics are beneficial for treating infections, their release into the environment has raised global concerns. In this work, the interactions of cellulose nanocrystal (CNC) derivatives with sulfamethoxazole (SMX), ciprofloxacin (CIP), and doxycycline (DOX) antibiotics were studied fundamentally. CNC was carboxyalkylated to bear different carbon chain lengths but similar negative charges on its surface. The highest level of adsorption of DOX on the carboxypantadecanated CNC (i.e., carboxyalkylated CNC with more carbon spacer, PCNC) occurred at pH 6.0, which was due to the electrostatic and π interactions along with hydrogen bonding. The contact angle and quartz crystal microbalance (QCM) adsorption analyses revealed a faster interaction and adsorption of DOX than other antibiotics on PCNC. The results also depicted the diffusion of DOX into the porous structure of CNC derivatives, especially that of PCNC. Also, a more compact adsorbed layer of DOX was formed on PCNC than on other CNC derivatives. Carboxyalkylation was observed to slightly reduce the surface area of CNC, while the antibiotic adsorption drastically increased the surface area of CNC due to their adsorption on the surface. XPS analysis revealed that carboxyalkylation significantly enhanced the C-C/C-H bond, while antibiotic adsorption on PCNC enhanced C-N/C-O and C-C/C-H bonds in antibiotic-loaded CNC samples. Overall, carboxyalkylated CNC was observed to have an outstanding affinity for capturing antibiotics, especially DOX, which could pave the way for the use of CNC in such applications that surface/antibiotic interactions were essential.

EDTAD-modified cassava stalks loaded with Fe3O4: highly efficient removal of Pb2+ and Zn2+ from aqueous solution

In this study, a novel magnetic cassava stalk composite (M-EMCS) was prepared through modification with ethylenediamine tetraacetic anhydride (EDTAD) and loading of Fe₃O₄. The surface morphology, molecular structure, and magnetic characteristics of the composite were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), vibrating-sample magnetometer (VSM), and X-ray diffraction (XRD). It was shown that EDTAD and Fe₃O₄ were successfully modified and loaded in cassava straw (CS), respectively. The capacity of M-EMCS to absorb heavy metals under different influencing factors was tested by atomic absorption spectroscopy. The adsorption processes of both Pb²⁺ and Zn²⁺ were suitably described by second-order kinetic models and Langmuir models, indicating monolayer chemisorption. M-EMCS had high adsorption rates and adsorption capacities for these two metal ions. The adsorption of Pb²⁺ and Zn²⁺ reached a plateau after 10 min, and the adsorption capacity of Pb²⁺ (163.93 mg/g) was higher than that of Zn²⁺ (84.74 mg/g). Thermodynamic analysis showed that the adsorption of two metals by M-EMCS was spontaneous, endothermic, and irreversible. XPS analysis showed that M-EMCS mainly removes Pb²⁺ and Zn²⁺ through ion exchange, chelation, and redox. Graphical abstract.

Synthesis of novel biocomposite powder for simultaneous removal of hazardous ciprofloxacin and methylene blue: Central composite design, kinetic and isotherm studies using Brouers-Sotolongo family models

Over the past decades, extensive efforts have been made to use biomass-based-materials for wastewater-treatment. The first purpose of this study was to develop and characterize regenerated-reed/reed-charcoal (RR-ChR), an enhanced biosorbent from Tunisian-reed (Phragmites-australis). The second aim was to assess and optimize the RR-ChR use for the removal of binary ciprofloxacin antibiotic (CIP) and methylene blue dye (MB), using Central Composite Design under Response Surface methodology. The third purpose was to explain the mechanisms involved in the biosorption-process. The study revealed that the highest removal-percentages (76.66 % for the CIP and 100 % for the MB) were obtained under optimum conditions: 1.55 g/L of adsorbent, 35 mg/L of CIP, 75 mg/L of MB, a pH of 10.42 and 115.28 min contact time. It showed that the CIP biosorption mechanism was described by Brouers-Sotolongo-fractal model, with regression-coefficient (R²) of 0.9994 and a Person's Chi-square (X²) of 0.01. The Hill kinetic model better described the MB biosorption (R² = 1 and X² = 1.0E-4). The isotherm studies showed that the adsorbent surface was heterogeneous and the best nonlinear-fit was obtained with the Jovanovich (R² = 0.9711), and Brouers-Sotolongo (R² = 0.9723) models, for the CIP and MB adsorption, respectively. Finally, the RR-ChR lignocellulosic-biocomposite-powder could be adopted as efficient and cost-effective adsorbent.