Ag NPs coated PVDF@TiO2 nanofiber membrane prepared by epitaxial growth on TiO2 inter-layer for 4-NP reduction application

Efficient removal of methyl orange and ciprofloxacin by reusable Eu-TiO2/PVDF membranes with adsorption and photocatalysis methods

The presence of methyl orange (MO) and ciprofloxacin (CIP) in wastewater poses a serious threat to the environment and human health. Titanium dioxide nanoparticles (TiO2 NPs) are widely studied as photocatalysts for wastewater treatment. However, TiO2 NPs have the drawbacks of high energy required for activation, fast electron-hole pair recombination and difficulty in recovering from water. To overcome these problems, europium decorated titanium dioxide/poly(vinylidene fluoride) (Eu-TiO2/PVDF) membranes were successful prepared in this work by combining the modified sol-gel method and the immersion phase inversion method. The Eu-TiO2/PVDF membranes obtained with the increase of Eu-TiO2 NPs content during the preparation process were named M1, M2 and M3, respectively. The pure PVDF membrane without the addition of Eu-TiO2 NPs was named M0, which was prepared by the immersion phase inversion method and served as a reference. The prepared Eu-TiO2/PVDF membranes could not only adsorb MO, but also degrade CIP under visible-light irradiation. Moreover, the Eu-TiO2/PVDF membranes exhibited adsorption-photocatalytic activity towards a mixture of MO and CIP under visible-light irradiation. Last but not the least, the Eu-TiO2/PVDF membranes exhibited excellent recyclability and reusability, opening the avenue for a possible use of these membranes in sewage-treatment plants.

Synthesis and characterization of chitosan-copper nanocomposites and their catalytic properties for 4-nitrophenol reduction

Biopolymer-based copper nanoparticles (CuNPs) have become an area of significant interest due to their wide-ranging applications in a variety of fields. However, there remains a challenge in tailoring their morphologies and improving their properties. In this study, CuNPs were synthesized via wet chemical reduction using sodium hypophosphite monohydrate (NaH2PO2·H2O), l-ascorbic acid and chitosan. The effect of different synthesis conditions, including reaction pH, temperature, time, concentration of NaH2PO2·H2O, l-ascorbic acid and chitosan, as well as the deacetylation degree (DD) of chitosan, on the synthesis of CuNPs was investigated. The synthesized CuNPs were characterized by various analytical techniques. The catalytic properties of synthesized CuNPs were investigated for the reduction of 4-nitrophenol (4-NP) in the presence of sodium borohydride. The synthesis-morphology-catalytic activity relationship of CuNPs was discussed. The results suggested that the morphology of CuNPs could be adjusted by controlling the synthesis conditions. Chitosan DD significantly impacts the morphology of the synthesized CuNPs. As the chitosan DD decreased from 91.8 % to 52.3 %, the average particle size of synthesized CuNPs decreased from 43.9 ± 10.6 to 17.7 ± 5.9 nm and the shape changed from anisotropy to near-sphere. CuNPs synthesized using low DD (53.2 %) chitosan (CuNPs-N3) demonstrated the highest 4-NP conversion rate of 99.1 % and reaction rate constant of 0.3540 min-1. CuNPs-N3 was thermodynamically and kinetically more feasible than CuNPs synthesized with high DD chitosan. These findings provide important insights for further designing and developing hierarchical nanostructured CuNPs catalysts for broader applications.

Ag-BN/HNT-TiO2 nanofibers produced by electrospinning as catalysts to remove acetaminophen

In this study, we present a novel approach to enhancing the degradation of acetaminophen (ACT) using nanostructured hybrid nanofibers. The hybrid nanofibers were produced by employing both sol-gel and electrospinning methodologies, integrating precise quantities of silver (Ag) and boron nitride (BN) nanosheets into titanium oxide (TiO2) nanofibers and halloysite nanotubes (HNT). We extensively examined the morphology, structure, and optical properties of these materials by employing scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy in our analysis. In the case of the HNT-TiO2 composite, the introduction of Ag nanoparticles at concentrations of 0.5%, 1.5%, and 3% led to a significant improvement in photocatalytic activity. Under visible light exposure for 4 h, the photocatalytic activity increased from 63% (HNT-TiO2) to 78.92%, 91.21%, and 92.90%, respectively. This enhancement can be attributed to the role of Ag nanoparticles as co-catalysts, facilitating the separation of electrons and holes generated during the photocatalytic process. Furthermore, BN nanosheets served as co-catalysts, capitalizing on their distinct attributes, including exceptional thermal conductivity, chemical stability, and electrical insulation. The incorporation of BN nanosheets into the Ag (3%)/HNT-TiO2 composite at a concentration of 5% resulted in a remarkable increase in ACT degradation efficiency. The degradation efficiency improved from 59.47% to an impressive 99.29% within a 2-h irradiation period due to the presence of BN nanosheets. Toxicity and scavenging assays revealed that OH•-, O2•-, and h+ were the major contributors to ACT degradation. Moreover, across five consecutive cycles, the Ag-BN/HNT-TiO2 composite exhibited consistent and stable performance, underscoring the significant contributions of Ag and BN in augmenting the photocatalytic capabilities of the composite. Overall, our findings suggest that this novel hybrid nanofiber composite holds great promise for practical applications in environmental remediation due to its improved photocatalytic activity and stability.

Recyclable Mussel-Inspired Magnetic Nanocellulose@Polydopamine-Ag Nanocatalyst for Efficient Degradation of Refractory Organic Pollutants and Bacterial Disinfection

Development of a novel strategy to tackle bacterial-contaminated complex industrial wastewaters containing refractory organic pollutants is of great demand. In this study, polydopamine (PDA)-coated magnetic cellulose nanofiber (MCNF)-loaded silver nanoparticle (AgNP) (MCNF/PDA-Ag) nanocomposites were designed and applied for efficient degradation of organic dye pollutants and inactivation of Escherichia coli (E. coli) in wastewater. In the presence of NaBH₄, MCNF/PDA-Ag could achieve a high catalytic reduction rate of 6.54 min^-1 for the removal of methylene blue. Similarly, it showed good catalytic reduction performance for methyl orange (0.63 min^-1) and 4-nitrophenol (2.94 min^-1). The MCNF/PDA-Ag nanocomposites can be easily magnetically recycled and reused with negligible loss of catalytic performance. Moreover, this nanocatalyst also exhibited excellent disinfection performance against E. coli, with more than 99% disinfection ratio at very low doses (50 μg/mL). Overall, this work provides new insights into a delicate design of advanced magnetically recyclable silver nanocomposites with ultrahigh catalytic rates and excellent antibacterial properties from sustainable nature biomass.

Remediation of wastewater containing 4-nitrophenol using ionic liquid stabilized nanoparticles: Synthesis, characterizations and applications

In the present study, an ionic liquid (IL) based on 1-butyl-3- (trimethoxysilylpropyl) -imidazolium tetrafluoroborate (IL) was prepared using metathesis and anion exchange reactions and used to stabilize silver (AgNPs) nanoparticles. The IL-stabilized silver nanoparticles AgNPs@[BMSI]BF₄ were produced in an aqueous solution with NaBH₄ as a reducing agent. TGA, FTIR, XRD, BET, FSEM, TEM/HRTEM, XPS, and UV-Vis spectra were used to analyze AgNPs@[BMSI]BF₄ and were used for the catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of NaBH₄. AgNPs@[BMSI]BF₄ showed excellent catalytic properties for the reduction of 4-NP to 4-AP and showed 100% conversion of 4-NP to 4-AP within 6 min and the rate constant (k) was found to be 8.33 × 10^-3 s^-1. The reusability results indicated that 97.8% of 4-NP was converted to 4-AP with highly stable rate constants over six consecutive cycles. The activity factor (AF) and the turn-over frequency (TOF) at room temperature were 3.33 s^-1 gm^-1 and 0.166 s^-1, respectively. This study extends a new approach to the production of stable catalysts for the growing needs in wastewater treatment.

Development of Flexible Biceps Tremors Sensing Chip of PVDF Fibers with Nano-Silver Particles by Near-Field Electrospinning

Polyvinylidene fluoride (PVDF) and AgNO₃/PVDF composite piezoelectric fibers were prepared using near-field electrospinning technology. The prepared fibers are attached to the electrode sheet and encapsulated with polydimethylsiloxane to create an energy acquisition device and further fabricated into a dynamic sensing element. The addition of AgNO₃ significantly increased the conductivity of the solution from 40.33 μS/cm to 883.59 μS/cm, which in turn made the fiber drawing condition smoother with the increase of high voltage electric field and reduced the fiber wire diameter size from 0.37 μm to 0.23 μm. The tapping test shows that the voltage signal can reach ~0.9 V at a frequency of 7 Hz, and the energy conversion efficiency is twice that of the PVDF output voltage. The addition of AgNO₃ effectively enhances the molecular bonding ability, which effectively increases the piezoelectric constants of PVDF piezoelectric fibers. When the human body is exercised for a long period of time and the body is overloaded, the biceps muscle is found to produce 8 to 16 tremors/second through five arm flexion movements. The voltage output of the flexible dynamic soft sensor is between 0.7–0.9 V and shows an orderly alternating current waveform of voltage signals. The sensor can be used to detect muscle tremors after high-intensity training and to obtain advance information about changes in the symptoms of fasciculation, allowing for more accurate diagnosis and treatment.

Designing of a novel polyvinylidene fluoride/TiO2/UiO-66-NH2 membrane with photocatalytic antifouling properties using modified zirconium-based metal-organic framework

Novel polyvinylidene fluoride/TiO₂/UiO-66-NH₂ (PVDF/TiUN) membranes were produced by the delay phase separation method via introducing the TiO₂/UiO-66-NH₂ (TiUN) nanocomposite into PVDF casting solution. Interconnection of TiO₂ and UiO-66-NH₂ improved photocatalysis capacity and endowed PVDF/TiUN membranes with self-cleaning capability. Quantitative measurements showed that, firstly, PVDF/TiUN membranes exhibited improved photodegradation kinetics and efficiency (up to 88.1%) to Rhodamine B (RhB). Secondly, the performances of bovine serum albumin (BSA) rejection and permeation of PVDF/TiUN membranes outperformed those of other check samples, indicating enhanced hydrophilicity. Thirdly, rejection rate of BSA reached a breathtaking 98.14% and flux recovery ratio (FRR) of BSA reached a breathtaking 95.37%. Thus, given their excellent anti-contamination property and separation performance, the PVDF/TiUN membrane is very likely to be a novel water treatment membrane.

CoFe Nanoparticle-Decorated Reduced Graphene Oxide for the Highly Efficient Reduction of 4-Nitrophenol

High-performance, nonprecious metal catalysts with special morphologies and easy-to-recycle properties are essential for the treatment of environmental pollutants. Herein, CoFe nanoparticle-decorated reduced graphene oxide (RGO) catalysts were designed and successfully fabricated, and the catalyst was then used to reduce 4-nitrophenol into 4-aminophenol. Outstanding catalytic properties with a reduction rate constant of 4.613 min^-1 were achieved due to the synergistic properties of the CoFe metal alloy and the high-conductivity RGO components in the catalysts. In addition, the catalyst was conveniently recovered via magnets due to its inherent magnetic properties. The facile preparation, outstanding catalytic performance, structural stability, and low material costs make the CoFe/RGO nanocatalyst a promising candidate for potential applications in catalysis.

High efficient reduction of 4-nitrophenol and dye by filtration through Ag NPs coated PAN-Si catalytic membrane

Catalytic membrane plays an important role in environmental remedy. In this study, we reported an Ag coated membrane (PAN-Si-Cu-Ag) with a high catalytic activity to reduce 4-nitrophenol (4-NP) and methyl orange (MO) from water. The best performance is 99% reduction degree and 280 L m^-2.h^-1.bar^-1 flux for (4-NP) reduction at 4-NP: NaBH₄ = 1:50 (mM) during a 12-h filtration. The reduction degree for MO is above 90% and the flux is about 230 L m^-2·h^-1·bar^-1, which is almost the best report till now. The Ag coated membrane was prepared by metal displacement-epitaxial growth on silica covalent grafted PAN membrane (PAN-Si). Silica atoms were used as linker to ensure the good adhesion between polymer and metal NPs, the loss amount of Ag NPs from the coated catalytic membrane is loss about 2 μg/cm² after one month storage. Cheap metal NPs were firstly reduced on the surface of PAN-Si membrane and then used to displace Ag ions. Thus the obtained catalytic membrane showed a very high loading (28%). Finally, the catalytic filtration mechanism of 4-NP was distinguished by Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and adsorption measurement.