Catalytic and antimicrobial activities of magnetic nanoparticles supported N-heterocyclic palladium(II) complex: A magnetically recyclable catalyst for the treatment of environmental contaminants in aqueous media

Well-defined nanomagnetic nitrilotriacetic acid complex of Cu(ii) supported on silica-coated nanosized magnetite: a new highly efficient and magnetically separable catalyst for C-N bond formation

A nitrilotriacetic acid (NTA) complex of Cu(ii) supported on silica-coated nanosized magnetite Fe3O4@SiO2-Pr-DEA-[NTA-Cu(ii)]2 was prepared as a new well-defined magnetically separable nanomaterial and fully characterized via IR, XRD, FESEM, TEM, TGA, DLS, BET, VSM, solid-state UV-vis spectroscopy, EDX, ICP-OES, and FESEM-EDX map analyses. Thereafter, it was successfully applied as a new easily magnetically separable and reusable heterogeneous nanocatalyst for the Buchwald-Hartwig C-N bond formation reaction in DMF at 110 °C. Using this method, various kinds of nitrogen heterocycles, such as imidazoles, 2-methyl-1H-imidazole, benzimidazole, indole, and 10H-phenothiazine as well as aliphatic secondary amines such as piperidine, piperazine, morpholine, dimethylamine, and diethylamine, were reacted with aryl halide compounds, and the desired products were obtained with good to excellent yields. In all cases, the applied catalyst could be recovered easily and rapidly using an external magnet and reused 7 times without significant loss of catalytic activity.

Nitrogen-doped lignin-derived carbon for catalytic reduction of hexavalent chromium via HCOOH-mediated hydrogenation

It is highly desirable to explore efficient catalysts for reducing toxic Cr⁶⁺ to benign Cr³⁺ under mild and eco-friendly conditions. This article describes a facile fabrication of nitrogen doped carbon (N@C-g-C₃N₄) as a metal-free catalyst for Cr⁶⁺ reduction using lignin as a carbon source and g-C₃N₄ nanosheets as a nitrogen source. The structural properties of the N@C-g-C₃N₄ catalyst are characterized by TEM, HR-TEM, XRD, TGA, Raman, EDS-mapping, XPS and BET techniques. The summation of these analyses sheds light on the high surface area (903 m² g⁻¹), mesopore size (17.3 nm) and defects (I_D/I_G = 0.97) of N@C-g-C₃N₄, which contribute to its excellent catalytic activity in HCOOH-mediated reduction of Cr⁶⁺ to Cr³⁺ with high rate constant (2.98 min⁻¹) and turnover frequency (2.21 mol_K2Cr2O7 g_catalyst⁻¹ min⁻¹) and complete degradation (100%) within 5 min. The catalytic performance of the catalyst reveals that the reduction activity is significantly dependent on the concentration of Cr⁶⁺ and HCOOH, catalyst loading, pH, temperature, and foreign ions. Particularly, the N@C-g-C₃N₄ catalyst shows superior stability and renewability with little loss of activity (≥95%) after 8 months storage and five repeated uses. Furthermore, N@C-g-C₃N₄ can be applied in other hydrogenation reactions involving K₃[Fe(CN)₆], 4-NP and BPA using NaBH₄ as a hydrogen donor, and the removal of organic dyes. These findings illustrate that N@C-g-C₃N₄ as a metal-free catalyst is effective, versatile and eco-friendly for the reduction of Cr⁶⁺ from contaminated environments.

Lignin-derived carbon doped with nitrogen for Cr⁶⁺ reduction through HCOOH-mediated hydrogenation in mild conditions.

Natural carbohydrate-based thermosensitive chitosan/pectin adsorbent for removal of Pb(II) from aqueous solutions

Biodegradable and eco-friendly adsorbents composed of natural carbohydrates have been used to replace carbon-based materials. This study presents a natural carbohydrate-based chitosan/pectin (CS/Pec) hydrogel adsorbent to remove Pb(II) from aqueous solutions. The physical CS/Pec hydrogel was prepared by blending aqueous CS and Pec solutions at 65 °C, preventing the use of toxic chemistries (crosslinking agents). The thermosensitive CS/Pec hydrogel was quickly created by cooling CS/Pec blend at room temperature. The used strategy created stable CS/Pec hydrogel against disintegration and water dissolution. The as-prepared hydrogel was characterized by infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The adsorbent had 1.688 mmol -COO^- for each gram. These ionized sites bind Pb(II) ions, promoting their adsorption. The adsorption kinetic and equilibrium studies indicated that the Elovich and pseudo-second-order models adjusted well to the experimental data, respectively. The maximum removal capacities (q_m) predicted by the Langmuir and Sips isotherms achieved 108.2 and 97.55 mg/g at 0.83 g/L adsorbent dosage (pH 4.0). The hydrogel/Pb(II) pair was characterized by scanning electron microscopy (SEM), X-ray dispersive energy (EDS), and differential scanning calorimetry (DSC). The chemisorption seems to play an essential role in the Pb(II) adsorption. Therefore, the adsorbent was not recovered, showing low potential for reusability.

A versatile β-cyclodextrin and N-heterocyclic palladium complex bi-functionalized iron oxide nanoadsorbent for water treatment

By industrialization, management of water resources is known as one of the most challenging issues for human society due to the presence of various contaminants such as oil, azo dyes, and micropollutants in water. The treatment of wastewaters containing more than one type of pollutants via a single-step process cannot be performed by a simple adsorption process. In this study, by combining the advantages of superparamagnetic iron oxide, carboxymethyl-β-cyclodextrin polymer, and N-heterocyclic palladium complex, a versatile bi-functionalized iron oxide nanoadsorbent [Fe₃O₄@CM-β-CDP@Tet-Pd] was fabricated for the capture of toxic dyes in wastewater. The structure of nanoadsorbent was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, and vibrating sample magnetometer analysis. Afterward, the catalytic activity of the synthesized nanoadsorbent was examined in the aqueous solution of sodium borohydride as the reducing agent for rhodamine B, methylene blue, 4-nitrophenol, Metanil yellow, and Eosin Y. The UV-vis spectroscopy was used to monitor the catalytic activity of the [Fe₃O₄@CM-β-CDP@Tet-Pd] in an aqueous medium. The nanoadsorbent was successfully recovered and re-used six times, without remarkable loss in its catalytic activity. These results showed that the combination of iron oxide nanoparticles with carboxymethyl-β-cyclodextrin polymer provides a promising well-performed and easily recyclable nanoadsorbent for dye uptake and wastewater treatment.

Efficient and recyclable palladium enriched magnetic nanocatalyst for reduction of toxic environmental pollutants

In this paper, highly stable, powerful, and recyclable magnetic nanoparticles tethered N-heterocyclic carbene-palladium(II) ((CH₃)₃-NHC-Pd@Fe₃O₄) as magnetic nanocatalyst was successfully synthesized from a simplistic multistep synthesis under aerobic conditions through easily available low-cost chemicals. Newly synthesized (CH₃)₃-NHC-Pd@Fe₃O₄ magnetic nanocatalyst was characterized from various analytical tools and catalytic potential of the (CH₃)₃-NHC-Pd@Fe₃O₄ magnetic nanocatalyst was studied for the catalytic reduction of toxic 4-nitrophenol (4-NP), hexavalent chromium (Cr(VI)), Methylene Blue (MB) and Methyl Orange (MO) at room temperature in aqueous media. UV-Visible spectroscopy was employed to monitor the reduction reactions. New (CH₃)₃-NHC-Pd@Fe₃O₄ magnetic nanocatalyst exhibited excellent catalytic activity for the reduction of toxic environmental pollutants. Moreover, (CH₃)₃-NHC-Pd@Fe₃O₄ magnetic nanocatalyst could be easily and rapidly separated from the reaction mixture with the help of an external magnet and recycled minimum five times in reduction of 4-NP, MB, MO and four times in Cr(VI) without significant loss of catalytic potential and remains stable even after reuse.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Magnetization of biochar nanoparticles as a novel support for fabrication of organo nickel as a selective, reusable and magnetic nanocatalyst in organic reactions

Waste recycling is important process in green chemistry and economic efficiency. Herein, magnetized biochar nanoparticles were modified under green and environmentally friendly method and further were applied as reusable catalyst in organic reactions.

Trimetallic Nanoparticles: Greener Synthesis and Their Applications

Nanoparticles (NPs) and multifunctional nano-sized materials have significant applications in diverse fields, namely catalysis, sensors, optics, solar energy conversion, cancer therapy/diagnosis, and bioimaging. Trimetallic NPs have found unique catalytic, active food packaging, biomedical, antimicrobial, and sensing applications; they preserve an ever-superior level of catalytic activities and selectivity compared to monometallic and bimetallic nanomaterials. Due to these important applications, a variety of preparation routes, including hydrothermal, microemulsion, selective catalytic reduction, co-precipitation, and microwave-assisted methodologies have been reported for the syntheses of these nanomaterials. As the fabrication of nanomaterials using physicochemical methods often have hazardous and toxic impacts on the environment, there is a vital need to design innovative and well-organized eco-friendly, sustainable, and greener synthetic protocols for their assembly, by applying safer, renewable, and inexpensive materials. In this review, noteworthy recent advancements relating to the applications of trimetallic NPs and nanocomposites comprising these NPs are underscored as well as their eco-friendly and sustainable synthetic preparative options.

Highly efficient and stable catalysis of p-nitrophenol via silver/lignin/polyacrylic acid hydrogel

As the second largest natural polymer in nature, lignin has a large amount of reserves and has important practical application value, which has attracted increasing attention. Ag@LPAH, a nanometer silver catalyst with a 3D structure, was successfully prepared in a simple operation. In batch experiment and fixed-bed experiment, it showed excellent catalytic degradation ability and stability of 4-NP. Thanks to the large number of carboxyl groups present in the lignin-polyacrylic acid hydrogel, the silver nanoparticles are well controlled to grow with no agglomeration. Ag@LPAH-20 exhibited optimal catalytic performance and stability, requiring only 123 s to complete the reaction and maintaining 99% catalytic efficiency after 10 cycles. In addition, the catalytic efficiency can be maintained over 90% for more than 120 min in fixed bed experiment.