Fabrication of GO-Ag/PVDF/F127 modified membrane IPA coagulation bath for catalytic reduction of 4-nitrophenol

Fabrication of nanocomposite membranes containing Ag/GO nanohybrid for phycocyanin concentration

In this research, silver/graphene oxide (Ag/GO) nanohybrid was first synthesized and used in production of polysulfone (PSF) ultrafiltration (UF) membranes via phase inversion method for concentrating phycocyanin (PC) and treating methylene blue (MB) dye effluent. Designing the experiment (DOE) using Box-Behnken method by Design Expert software helped to calculate the optimal values of the variables under study. The studied variables included PSF polymer concentration, polyvinyl pyrrolidone (PVP) pore-former concentration and Ag/GO nanohybrid content, which were investigated for their effects on pure water flux (PWF) and MB pigment rejection. According to the results of the DOE, the membrane containing 19.485 wt% PSF, 0.043 wt% PVP and 0.987 wt% Ag/GO was selected as the optimal membrane. Due to the high price of PC as drug, and the importance of removing MB pigment from the effluent of dyeing and textile industries, the membranes were first optimized with MB pigment and then the optimal membrane was used for concentrating PC. The results showed that PWF reaches from 40.05 L.m- 2.h- 1 (LMH) for the neat membrane to 156.73 LMH for the optimized membrane, which shows about 4 times improvement. Compared to the neat membrane, flux recovery ratio (FRR) of the optimized membrane increased by about 20% and its total fouling (Rt) decreased by about 10%. Also, the results showed that the optimized membrane can remove 81.6% of MB, as well as to reject 93.8% of PC.

Highly Efficient Electrospun Silver Decorated Graphene Oxide Nanocomposites on Poly(vinylidene fluoride) (PVDF@GO-Ag) Hybrid Membrane for Reduction of 4-Nitrophenol

Graphene oxide-silver poly(vinylidene fluoride) membranes (PVDF@GO-Ag) were successfully synthesized by the electrospinning method, which exhibited a high catalytic activity using the hydrogenation of 4-nitrophenol (4-NP) as a model reaction in a batch reaction study. The hybrid membranes doped with 1 wt% GO and 2 wt% Ag (PVDF-1-2) exhibited the most desired performance for the catalytic reduction of 4-NP. Importantly, PVDF-1-2 exhibited excellent cycling stability in 10 catalytic cycle tests and was highly amenable to separation. This property effectively addresses the significant challenges associated with the practical application of nanocatalysts. Furthermore, density-functional theory (DFT) calculations have demonstrated that the GO-Ag nanocomposites exhibit the strongest adsorption capacity for 4-NP- when a specific ratio of GO and Ag is achieved, accompanied by the loading of Ag nanoclusters onto GO. Additionally, the study demonstrated that an increase in temperature significantly accelerated the reaction rate, in line with the van't Hoff rule. This study provides an effective and environmentally friendly solution for the treatment of 4-NP in wastewater.

Integrated In Situ Fabrication of CuO Nanorod-Decorated Polymer Membranes for the Catalytic Flow-Through Reduction of p-Nitrophenol

We developed a novel method to fabricate copper nanorods in situ in a poly(ether sulfone) (15 wt %) casting solution by a sonochemical reduction of Cu2+ ions with NaBH4. The main twist is the addition of ethanol to remove excess NaBH4 through Cu(0) catalyzed ethanolysis. This enabled the direct use of the resulting copper-containing casting dispersions for membrane preparation by liquid nonsolvent-induced phase separation and led to full utilization of the copper source, generating zero metal waste. We characterized the copper nanorods as presented in the membranes via scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and UV/vis spectroscopy. We could demonstrate that the rapid immobilization from reducing conditions led to the membrane incorporation of copper nanorods in a state of high reactivity, which also promoted the complete oxidation to CuO after fabrication. We further observed a large aspect ratio and crystal straining of the nanorods, likely resulting from growth around the matrix polymer. The entanglement with poly(ether sulfone) further facilitated a selective presentation at the pore surface of the final CuO-decorated membranes. The membranes also exhibit high water permeances of up to 2800 L/m2hbar. Our catalytic membranes achieved exceptionally high activities in the aqueous flow-through reduction of p-nitrophenol (p-NP), with turnover frequencies of up to 115 h-1, even surpassing those of other state-of-the-art catalytic membranes that incorporate Pd or Ag. Additionally, we demonstrated that catalytic hydrolysis of the reducing agent in water can lead to hydrogen gas formation and blocking of active sites during continuous catalytic p-NP hydrogenation. We illustrated that the accompanying conversion loss can be mitigated by facilitated gas transport in the water-filled pores, which is dependent on the orientation of the pore size gradient and the flow direction.

Self-cleaning and photodegradle PVDF separation membranes modified with self-assembled TiO2-g-CS/CNTs particle

This work obtained separation membranes with UV-cleaning performance by adding TiO2-g-CS/CNTs photocatalyst to the PVDF. The positively charged chitosan (CS) and negatively charged carboxylic carbon nanotube (CNTs-COOH) can be self-assembled into the bilayer structure on the surface of TiO2 particles through electrostatic attraction. The presence of many hydrophilic groups in CS and CNTs-COOH significantly improves the hydrophilicity of TiO2-g-CS/CNTs-PVDF membrane, and helps TiO2 to be uniformly dispersed on the upper surface. TiO2-g-CS/CNTs promote the change of pore structure and expand the flux of the modified membrane to 4.5 times that of pure PVDF. Zeta potential demonstrates that the TiO2-g-CS particles successfully attracted CNTs in the PVDF matrix, and the membrane surface was still positively charged. Thus, the combined effect of the positively charged TiO2-g-CS and the highly adsorbed CNTs enhanced the retention of the contaminants. More importantly, there is a charge transfer between the grafted CS and TiO2 interface to obtain a broader light absorption band. The excitation carriers provided by CNTs significantly contribute to the photocatalytic performance after transfer between TiO2 and CS; thus, TiO2-g-CS/CNTs-PVDF produces higher photocatalytic activity for dye molecules (degradation rate > 97 %).

Preparation of a CAB-GO/PES Mixed Matrix Ultrafiltration Membrane and Its Antifouling Performance

Serious membrane fouling has limited the development of ultrafiltration membrane technology for water purification. Synthesis of an ultrafiltration membrane with prominent anti-fouling ability is of vital importance. In this study, CAB-GO composite nanosheets were prepared by grafting graphene oxide (GO) with a zwitterionic material cocamidopropyl betaine (CAB) with strong antifouling properties. Anti-fouling CAB-GO/PES mixed matrix ultrafiltration membrane (CGM) was prepared by the phase inversion method with polyethersulfone (PES). Due to its electrostatic interaction, the interlayer distance between CAB-GO nanosheets was increased, and the dispersibility of GO was improved to large extent, thereby effectively avoiding the phenomenon of GO agglomeration in organic solvents. Based on the improvement of the surface porosity and surface hydrophilicity of the CAB-GO/PES mixed matrix membrane, the pure water flux of CGM-1.0 can reach 461 L/(m²·h), which was 2.5 times higher than that of the original PES membrane, and the rejection rates toward BSA and HA were above 96%. Moreover, when the content of CAB-GO was 0.1 wt%, the prepared CAB-GO/PES membrane exhibited very high BSA (99.1%) and HA (98.1%) rejection during long-term operation, indicating excellent anti-fouling ability.

Antimicrobial Activity of Graphene-Based Nanocomposites: Synthesis, Characterization, and Their Applications for Human Welfare

Graphene (GN)-related nanomaterials such as graphene oxide, reduced graphene oxide, quantum dots, etc., and their composites have attracted significant interest owing to their efficient antimicrobial properties and thus newer GN-based composites are being readily developed, characterized, and explored for clinical applications by scientists worldwide. The GN offers excellent surface properties, i.e., a large surface area, pH sensitivity, and significant biocompatibility with the biological system. In recent years, GN has found applications in tissue engineering owing to its impressive stiffness, mechanical strength, electrical conductivity, and the ability to innovate in two-dimensional (2D) and three-dimensional (3D) design. It also offers a photothermic effect that potentiates the targeted killing of cells via physicochemical interactions. It is generally synthesized by physical and chemical methods and is characterized by modern and sophisticated analytical techniques such as NMR, Raman spectroscopy, electron microscopy, etc. A lot of reports show the successful conjugation of GN with existing repurposed drugs, which improves their therapeutic efficacy against many microbial infections and also its potential application in drug delivery. Thus, in this review, the antimicrobial potentialities of GN-based nanomaterials, their synthesis, and their toxicities in biological systems are discussed.

Preparation of hydrophilic modified polyvinylidene fluoride (PVDF) ultrafiltration membranes by polymer/non-solvent co-induced phase separation: effect of coagulation bath temperature

Membrane separation technology is widely used in wastewater purification, but the issue of membrane fouling could not be ignored. Hydrophilic modification is an effective method to reduce membrane fouling. Therefore, in this work, a hydrophilic modified polyvinylidene fluoride (PVDF) ultrafiltration membrane was prepared by polymer/non-solvent co-induced phase separation, and the effect of coagulation bath temperature on the membrane structure and performance was systematically investigated based on the previous study. With the increased of the coagulation bath temperature, the phase separation process changed from delayed to instantaneous, and the membrane surface changed from porous to dense, while the macropore structures and sponge-like pores appeared on the cross-section. Meanwhile, the pure water flux decreased from 229.3 L/(m2·h) to 2.08 L/(m2·h), the protein rejection rate increased from 83.87% to 100%, and the surface water contact angle increased from 63° to 90°. Thus, excessively high coagulation bath temperature adversely affected the permeate and separation performance, as well as antifouling performance of the membrane. This study enriched the research for preparing separation membranes by polymer/non-solvent co-induced phase separation and provided a practical and theoretical reference for controlling the membrane structure and properties by changing the coagulation bath temperature.

High efficient reduction of 4-nitrophenol and dye by filtration through Ag NPs coated PAN-Si catalytic membrane

Catalytic membrane plays an important role in environmental remedy. In this study, we reported an Ag coated membrane (PAN-Si-Cu-Ag) with a high catalytic activity to reduce 4-nitrophenol (4-NP) and methyl orange (MO) from water. The best performance is 99% reduction degree and 280 L m^-2.h^-1.bar^-1 flux for (4-NP) reduction at 4-NP: NaBH₄ = 1:50 (mM) during a 12-h filtration. The reduction degree for MO is above 90% and the flux is about 230 L m^-2·h^-1·bar^-1, which is almost the best report till now. The Ag coated membrane was prepared by metal displacement-epitaxial growth on silica covalent grafted PAN membrane (PAN-Si). Silica atoms were used as linker to ensure the good adhesion between polymer and metal NPs, the loss amount of Ag NPs from the coated catalytic membrane is loss about 2 μg/cm² after one month storage. Cheap metal NPs were firstly reduced on the surface of PAN-Si membrane and then used to displace Ag ions. Thus the obtained catalytic membrane showed a very high loading (28%). Finally, the catalytic filtration mechanism of 4-NP was distinguished by Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and adsorption measurement.