Opportunities for coupled electrochemical and ion-exchange technologies to remove recalcitrant micropollutants in water

Facile Synthesis of a Novel AgIO3/CTF Heterojunction and Its Adsorption-Photocatalytic Performance with Organic Pollutants

With the development of modern industry, the issue of water pollution has garnered increasing attention. Photocatalysis, as a novel green environmental technology that is resource-efficient, environmentally friendly, and highly promising, has found extensive applications in the field of organic pollutant treatment. However, common semiconductor materials exhibit either a relatively low photocatalytic efficiency in the visible light range or an inefficient separation of photogenerated charges, resulting in their limited ability to harness solar energy effectively. Consequently, the development of new photocatalysts has become a pivotal focus in current photocatalysis research to enhance solar energy utilization. This research provides a brief explanation of the photocatalytic mechanism of the AgIO3/CTF heterojunction photocatalyst. Due to the localized surface plasmon resonance (LSPR) effect, the Ag nanoparticles demonstrate significant absorption in the visible light region, playing a crucial role in the highly efficient photocatalytic reduction of organic pollutants.

Membranes in Water Reclamation: Treatment, Reuse and Concentrate Management

In this article, an extensive examination is provided on the possible uses of membranes and hybrid processes in wastewater treatment. While membrane technologies face certain constraints, such as membrane fouling and scaling, the incomplete elimination of emerging contaminants, elevated expenses, energy usage, and brine disposal, there are approaches that can address these challenges. Methods such as pretreating the feed water, utilizing hybrid membrane systems and hybrid dual-membrane systems, and employing other innovative membrane-based treatment techniques can enhance the efficacy of membrane processes and advance sustainability.

Recent advances and applicable flexibility potential of electrochemical processes for wastewater treatment

This study examined >140 relevant publications from the last few years (2018-2021). In this study, classification was reviewed depending on the operation's progress. Electrocoagulation (EC), electrooxidation (EO), electroflotation (EF), electrodialysis (ED), and electro-Fenton (EFN) processes have received considerable attention. The type of action (individual or hybrid) for each electrochemical procedure was evaluated, and statistical analysis was performed to compare them as a new manner of reviewing cited papers providing a massive amount of information efficiently to the readers. Individual or hybrid operation progress of the electrochemical techniques is critical issues. Their design, operation, and maintenance costs vary depending on the in-situ conditions, as evidenced by surveyed articles and statistical analyses. This work also examines the variables affecting the elimination efficacy, such as the applied current, reaction time, pH, type of electrolyte, initial pollutant concentration, and energy consumption. In addition, owing to its efficacy in removing toxins, the hybrid activity showed a good percentage among the studies reviewed. The promise of each wastewater treatment technology depends on the type of contamination. In some cases, EO requires additives to oxidise the pollutants. EF and EFN eliminated lightweight organic pollutants. ED has been used to treat saline water. Compared to other methods, EC has been extensively employed to remove a wide variety of contaminants.

Photocatalysis coupled with adsorption of AC@Ni0.5Cu0.5Fe2O4 in peroxydisulfate assisted system efficiently enhance ciprofloxacin removal

Nickle-copper ferrite (Ni_0.5Cu_0.5Fe₂O₄) supported on activated carbon (AC) (AC@Ni_0.5Cu_0.5Fe₂O₄) was synthesized and used as adsorbent, photocatalyst, and activator of peroxydisulfate (PDS) to realize the removal of ciprofloxacin (CIP). AC@Ni_0.5Cu_0.5Fe₂O₄ properties were characterized by scanning electron microscope equipped with energy-dispersive X-ray (SEM-EDX), X-ray diffraction (XRD), N₂ adsorption-desorption isotherm plot of Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH), vibrating sample magnetometer (VSM). A rapid removal rate (94.30%) of CIP was achieved on AC@Ni_0.5Cu_0.5Fe₂O₄/PDS/UV system with the condition of catalyst dosage 0.30 g/L, initial pH 7.3, PDS addition 0.20 mM, CIP concentration 10 mg/L (200 mL), UV 28 W, in 30 min. Free radical quenching experiments indicate that reactive species of superoxide (·O₂^-), holes (h⁺), sulfate radicals (SO₄^-·) and hydroxyl radicals (·OH) were produced and all worked. The reusability test demonstrated that AC@Ni_0.5Cu_0.5Fe₂O₄ could be recycled five times with minimal performance reduction for the removal of CIP. The XRD and SEM of the after used AC@Ni_0.5Cu_0.5Fe₂O₄ did not change significantly, which further showed its stability and recyclability. This work might provide new insight into the application of AC@Ni_0.5Cu_0.5Fe₂O₄ in photocatalysis coupled with adsorption in peroxydisulfate assisted system and has high potential in CIP removal.

Cross-linked laminar graphene oxide membranes for wastewater treatment and desalination: A review

Two-dimensional (2D) lamellar graphene oxide (GO) membranes are emerging as attractive materials for molecular separation in water treatment because of their single atomic thickness, excellent hydrophilicity, large specific surface areas, and controllable properties. To yet, commercialization of GO laminar membranes has been hindered by their propensity to swell in hydrated conditions. Thus, chemical crosslinking of GO sheets with the polymer matrix is used to improve GO membrane hydration stability. This review focuses on pertinent themes such as how chemical crosslinking improves the hydration stability, separation performance, and antifouling properties of GO membranes.

Effective water/wastewater treatment methodologies for toxic pollutants removal: Processes and applications towards sustainable development

Release of pollutants due to inflating anthropogenic activities has a conspicuous effect on the environment. As water is uniquely vulnerable to pollution, water pollution control has received a considerable attention among the most critical environmental challenges. Diverse sources such as heavy metals, dyes, pathogenic and organic compounds lead to deterioration in water quality. Demand for the pollutant free water has created a greater concern in water treatment technologies. The pollutants can be mitigated through physical, chemical and biological methodologies thereby alleviating the health and environmental effects caused. Diverse technologies for wastewater treatment with an accentuation on pre-treatment of feedstock and post treatment are concisely summed up. Pollutants present in the water can be removed by processes some of which include filtration, reverse osmosis, degasification, sedimentation, flocculation, precipitation and adsorption. Membrane separation and adsorption methodologies utilized to control water pollution and are found to be more effective than conventional methods and established recovery processes. This audit relatively features different methodologies that show remarkable power of eliminating pollutants from wastewater. This review describes recent research development on wastewater treatment and its respective benefits/applications in field scale were discussed. Finally, the difficulties in the enhancement of treatment methodologies for pragmatic commercial application are recognized and the future viewpoints are introduced.

Removal of ibuprofen from aqueous media by adsorption: A comprehensive review

Ibuprofen (IBP) is a non-steroidal anti-inflammatory drug released into the environment through hospital and medical effluents, pharmaceutical wastewater and veterinary use. The aim of this paper is to review the empirical findings on the adsorption of IBP from aqueous media. A preliminary ecotoxicological assessment confirmed the environmental risk of IBP in the aqueous environment. Open literature works considered in this review were for the past decade (2010-2020). Carbon-based adsorbents are the best class of adsorbent for the uptake of IBP and the highest reported maximum adsorption capacity (q_max) for IBP is 496.1 mg/g by SWCNTs. The range of adsorption capacities for IBP uptake in this review is between 0.0496 and 496.1 mg/g. The mechanism of uptake is majorly by hydrophobic interactions, π - π stacking, hydrogen bonds, electrostatic interactions and dipole-dipole interaction. IBP uptake was best fit to a wide variety of isotherm models but was well suited to the pseudo-second order kinetics model. The thermodynamics of IBP uptake depends majorly on the nature of the adsorbent and desorption from the solid phase is based on an appropriate choice of the eluent. Knowledge gaps were observed in used adsorbent disposal and process improvement. In the future, interest would increase in scale-up, industrial applications and practical utilisation of the research findings which would help in sustainable water resource management.