Pre-deposition layers for alleviating ultrafiltration membrane fouling by organic matter: Role of hexagonally and cubically ordered mesoporous carbons

A review of flow field characteristics in submerged hollow fiber membrane bioreactor: Micro-interface, module and reactor

As an important part of the membrane field, hollow fiber membranes (HFM) have been widely concerned by scholars. HFM fouling in the industrial application results in a reduction in its lifespan and an increase in cost. In recent years, various explorations on the HFM fouling control strategies have been carried out. In the current work, we critically review the influence of flow field characteristics in HFM-based bioreactor on membrane fouling control. The flow field characteristics mainly refer to the spatial and temporal variation of the related physical parameters. In the HFM field, the physical parameter mainly refers to the variation characteristics of the shear force, flow velocity and turbulence caused by hydraulics. The factors affecting the flow field characteristics will be discussed from three levels: the micro-flow field near the interface of membrane (micro-interface), the flow field around the membrane module and the reactor design related to flow field, which involves surface morphology, crossflow, aeration, fiber packing density, membrane vibration, structural design and other related parameters. The study of flow field characteristics and influencing factors in the HFM separation process will help to improve the performance of HFM in full-scale water treatment plants.

Effect of peroxydisulfate oxidation catalyzed with ordered mesoporous carbons on controlling ultrafiltration membrane fouling by algal organic matter

As typical ordered mesoporous carbons (OMCs) materials, CMK-3 and CMK-8 were proposed for catalyzing peroxydisulfate (PDS), and the OMCs/PDS process was combined with membrane filtration to remove algal extracellular organic matter and mitigate membrane fouling. The CMK-3/PDS process achieved substantial reduction of dissolved organic carbon and UV₂₅₄, followed by CMK-8/PDS. The degradation behavior of fluorescent organics demonstrated the superior performance of OMCs/PDS, while the decomposition of high molecular weight (MW) compounds and generation of lower MW organics were observed. Generally, CMK-3 possessed higher catalytic activity on PDS compared with CMK-8 and powdered activated carbon. The CMK-3/PDS process distinctly decreased the fouling resistances for polyether sulfone and polyvinylidene fluoride membranes, with the reversible resistance reduced by 59.5-83.2% and irreversible resistance declined by 71.7-73.0%. In the meanwhile, CMK-3/PDS prolonged the volumes to the transition period, and postponed the cake layer's generation. The characterization of the membrane morphologies and chemical compositions also showed effective alleviation of fouling. The generated SO₄^-, OH, O₂^- and ¹O₂ as major active oxidation species provided radical as well as non-radical reaction ways for pollutants removal. Overall, our study provides some new ideas for membrane-based combined water purification processes.

Fouling, performance and cost analysis of membrane-based water desalination technologies: A critical review

While water is a key resource required to sustain life, freshwater sources and aquifers are being depleted at an alarming rate. As a mitigation strategy, saline water desalination is commonly used to supplement the available water resources beyond direct water supply. This is achieved through effective advanced water purification processes enabled to handle complex matrix of saline wastewater. Membrane technology has been extensively evaluated for water desalination. This includes the use of reverse osmosis (RO) (the most mature membrane technology for desalination), pervaporation (PV), electrodialysis (ED), membrane distillation (MD), and membrane crystallization (MCr). Though nanofiltration (NF) is not mainly applied for desalination purposes, it is included in the reviewed processes because of its ability to reach 90% salt rejection efficiency for water softening. However, its comparison with other technologies is not provided since NF cannot be used for removal of NaCl during desalination. Remarkably, membrane processes remain critically affected by several challenges including membrane fouling. Moreover, capital expenditure (CAPEX) and operating expenditure (OPEX) are the key factors influencing the establishment of water desalination processes. Therefore, this paper provides a concise and yet comprehensive review of the membrane processes used to desalt saline water. Furthermore, the successes and failures of each process are critically reviewed. Finally, the CAPEX and OPEX of these water desalination processes are reviewed and compared. Based on the findings of this review, MD is relatively comparable to RO in terms of process performance achieving 99% salt rejections. Also, high salt rejections are reported on ED and PV. The operation and maintenance (O&M) costs remain lower in ED. Notably, the small-scale MD OPEX falls below that of RO. However, the large-scale O&M in MD is rarely reported due to its slow industrial growth, thus making RO the most preferred in the current water desalination markets.

Review of New Approaches for Fouling Mitigation in Membrane Separation Processes in Water Treatment Applications

This review investigates antifouling agents used in the process of membrane separation (MS), in reverse osmosis (RO), ultrafiltration (UF), nanofiltration (NF), microfiltration (MF), membrane distillation (MD), and membrane bioreactors (MBR), and clarifies the fouling mechanism. Membrane fouling is an incomplete substance formed on the membrane surface, which will quickly reduce the permeation flux and damage the membrane. Foulant is colloidal matter: organic matter (humic acid, protein, carbohydrate, nano/microplastics), inorganic matter (clay such as potassium montmorillonite, silica salt, metal oxide, etc.), and biological matter (viruses, bacteria and microorganisms adhering to the surface of the membrane in the case of nutrients) The stability and performance of the tested nanometric membranes, as well as the mitigation of pollution assisted by electricity and the cleaning and repair of membranes, are reported. Physical, chemical, physico-chemical, and biological methods for cleaning membranes. Biologically induced biofilm dispersion effectively controls fouling. Dynamic changes in membrane foulants during long-term operation are critical to the development and implementation of fouling control methods. Membrane fouling control strategies show that improving membrane performance is not only the end goal, but new ideas and new technologies for membrane cleaning and repair need to be explored and developed in order to develop future applications.

Toward Enhancing Desalination and Heavy Metal Removal of TFC Nanofiltration Membranes: A Cost-Effective Interface Temperature-Regulated Interfacial Polymerization

Polyamide (PA) chemistry-based nanofiltration (NF) membranes have an important role in the field of seawater desalination and wastewater reclamation. Achieving an ultrathin and defect-free active layer via precisely controlled interfacial polymerization (IP) is an effective routine to improve the separation efficiencies of NF membranes. Herein, the morphologies and chemical structures of the thin-film composite (TFC) NF membranes were accurately regulated by tailoring the interfacial reaction temperature during the IP process. This strategy was achieved by controlling the temperature (-15, 5, 20, 35, and 50°) of the oil-phase solutions. The structural compositions, morphological variations, and separation features of the fabricated NF membranes were studied in detail. In addition, the formation mechanisms of the NF membranes featuring different PAs were also proposed and discussed. The temperature-assisted IP (TAIP) method greatly changed the compositions of the resultant PA membranes. A very smooth and thin PA film was obtained for the NF membranes fabricated at a low interfacial temperature; thus, a high 19.2 L m^-2 h^-1 bar^-1 of water permeance and 97.7% of Na₂SO₄ rejection were observed. With regard to the NF membranes obtained at a high interfacial temperature, a lower water permeance and higher salt rejection with fewer membrane defects were achieved. Impressively, the high interfacial temperature-assisted NF membranes exhibited uniform coffee-ring-like surface morphologies. The special surface-featured NF membrane showed superior separation for selected heavy metals. Rejections of 93.9%, 97.9%, and 87.7% for Cu²⁺, Mn²⁺, and Cd²⁺ were observed with the optimized membrane. Three cycles of fouling tests indicated that NF membranes fabricated at low temperatures exhibited excellent antifouling behavior, whereas a high interface temperature contributed to the formation of NF membranes with high fouling tendency. This study provides an economical, facile, and universal TAIP strategy for tailoring the performances of TFC PA membranes for environmental water treatment.

Evaluations of holey graphene oxide modified ultrafiltration membrane and the performance for water purification

Membrane technology has been widely used in the fields of drinking water treatment with the advantages of pollutants separation. However, membrane fouling has become main obstacle in further application. Graphene oxide (GO) and its functionalized derivatives are considered to be ideal membrane modification materials of membrane fouling control. However, GO coated membranes were suffered from serious flux decline which raises challenges for GO modification. In this study, porous holey graphene oxide (HGO) was synthesized by hydrothermal etched GO to modify UF membranes. Water permeability of HGO membrane was more than twice that of GO membrane at the loading of 0.08 g/m². At the optimal loading of 0.08 g/m², the rejection rate of HGO coated membrane on natural organic matter (NOM) such as bovine serum albumin (BSA), sodium alginate (SA) and humic acid (HA) was increased from 55%, 29%, 58%-85%, 72%, 92%, and the contact angle was reduced from 71° to 35° with the HGO coating amount of 0.04 g/m². Finally, the membrane fouling resistance distribution of each HGO membrane was analyzed given HA as model pollutant, and the effects of HGO on mitigating the organic fouling of Polyethersulfone (PES) membranes were discussed. The total fouling resistance decreased from 3.45 to 1.73 with HGO coating, the irreversible fouling decreased by 62.86%-95.83%. Standard blocking was dominated during filtration. It was also found that increasing the loading of HGO could delay the conversion of pore blocking to the cake layer. Overall, HGO coating has an application prospect for membrane fouling control.

Recent development of photocatalytic nanomaterials in mixed matrix membrane for emerging pollutants and fouling control, membrane cleaning process

Membrane-based separation is an area of extensive research in wastewater treatment, which includes the control of pollution and reuse of water. The fabrication and modification membranes for prevention and reduction of pollution to provide quality water with fouling-free membranes through the wastewater treatment are the progressive approaches in the industries. Several research works have been extensively working on modification and fabrication polymer membranes with integration of advanced oxidation process (AOP) to overcome the membrane fouling. This review describes the modification of membranes with various nanomaterials such as inorganic and modified carbon which can be used for pollution control and enhance the anti-fouling properties of ultrafiltration membranes. The effects on nanomaterials loading percentage, nanomaterials interaction with the polymers and rejection performances of the surface tuned membrane are elaborated. Secondly, the fouled membrane chemical cleaning process and NaOCl adverse effect on polymer structure are critically investigated. Moreover, state-of-art in the photocatalytic self-cleaning process are reviewed in this manuscript, and future perspectives on fouling mitigation based on AOP integrated membrane technology have also discussed.

Ferrous-activated sodium percarbonate pre-oxidation for membrane fouling control during ultrafiltration of algae-laden water

Membrane technology has been shown to be promising for the treatment of algae-laden water, but membrane fouling is still an obstacle influencing the purification efficiency and effluent quality. To mitigate ultrafiltration membrane fouling during Microcystis aeruginosa-laden water treatment, a strategy of sodium percarbonate pre-oxidation activated with ferrous ion (Fe²⁺/SPC) was put forward in this study. Due to the synergistic effect of Fe²⁺ and SPC, this process was significantly more efficient with the terminal specific flux increased from 0.097 to 0.397, and the reversible fouling resistance reduced by approximately 80%. It was also found that subsequent sedimentation followed by Fe²⁺/SPC could further improve the fouling control efficiency. The model fitting results indicated that Fe²⁺/SPC pre-oxidation delayed the transition from standard blocking to cake filtration. Extracellular organic matter and algal cells were extracted from algal foulants to explore the contribution of each component, and the fouling control efficiencies were systematically studied. The characteristics of the algal foulants were determined with fluorescence excitation-emission matrix spectrum, and the results suggested that macromolecular proteinaceous substances were more efficiently removed by Fe²⁺/SPC, in comparison with humic-like matters. The alleviation of membrane fouling was also verified by the characterization methods of scanning electron microscopy and attenuated total reflection-Fourier infrared spectroscopy. Overall, the proposed strategy of Fe²⁺/SPC has an application prospect for membrane fouling control in algal-laden water treatment.

Hybrid UF/NF process treating secondary effluent of wastewater treatment plants for potable water reuse: Adsorption vs. coagulation for removal improvements and membrane fouling alleviation

Coagulation and adsorption are gradually adopted as pre-treatments to produce reclaimed potable water. However, previous researches on membrane fouling mechanisms were currently insufficient to minimize dual membrane fouling. This study aimed at investigating the effects of pre-coagulation and pre-adsorption on the removal performance and membrane fouling alleviation of dual membrane UF/NF process in treating secondary effluent from a wastewater treatment plant. The results indicated that both types of pretreatments conferred positive effects on organic membrane fouling removal of the UF process whereas diverse effects on NF process. Pre-coagulation could enhance the removal of nitrogen and phosphorus to contribute towards producing microbiologically-stable water. On the other hand, introduction of Al³⁺ reduced the removal efficiency of UF/NF systems on heavy metals. From the perspective of UF membrane fouling, two pretreatments employed could increase the flux of UF, but simultaneously aggravating irreversible membrane fouling. Hermia and Tansel models revealed an unstable cake filtration was caused by pre-coagulation and pre-adsorption. Both the models consistently demonstrated the rapid formation of cake filtration onto UF membrane surface. Interestingly, the powdered activated carbon (PAC) adsorption could significantly reduce cake layer fouling onto the surface of NF membrane, while pre-coagulation aggravated the NF fouling. These results are essential to developing robust, cost-effective and energy-efficient strategies based on membranes to produce reclaimed potable water.

Effect of Photooxidation on Nanofiltration Membrane Fouling During Wastewater Treatment from the Confectionery Industry

The research in this article aimed to present the possibilities of wastewater treatment coming from the confectionery plant in the nanofiltration (NF) process and the use of photooxidation to mitigate membrane fouling. The process was carried out initially in a dead-end flow system, where the most favorable membrane was selected. Next, the purification efficiency and blocking intensity of this membrane in the system were compared with cross flow. The next research involved the use of a photolytic oxidation process to pretreat sugar wastewater. UV radiation was emitted by a medium pressure mercury UV lamp model TQ 150 V. The effectiveness of the process was also evaluated based on the degree of pollutant load removal. The evaluation of the efficiency of a treatment process was based on the change of wastewater quality indicators before and after the membrane process. The following parameters were controlled: color, COD (chemical oxygen demand), TOC (total organic carbon), absorbance of UV254, nitrate, phosphate, ammonium, conductivity, and pH. During the course of pressure filtration, the following properties of the membrane were determined: the dependence of the volumetric flux of the permeate on the process duration, the permeability of the membrane, as well as the contact angle of the membranes. It was found that the use of UV reduced the phenomenon of fouling of nanofiltration membranes. The value of the permeate volumetric flow after the hour of running the process increased by 17%. However, no impact of UV on the efficiency of wastewater treatment was found. However, the NF process provided the required quality of treated wastewater that can be reused in industrial applications. The NF process resulted in a total decrease in absorbance, 99% TOC removal, and 98% color removal.