Green BiOI impregnated 2-dimensional cylindrical carbon block: A promising solution for environmental remediation and easy recovery of the photocatalyst

Bio-fabricated bismuth-based materials for removal of emerging environmental contaminants from wastewater

Although rapid industrialization has made life easier for humans, several associated issues are emerging and harming the environment. Wastewater is regarded as one of the key problems of the 21st century due to its massive production every year and requires immediate attention from all stakeholders to protect the environment. Since the introduction of nanotechnology, bismuth-based nanomaterials have been used in variety of applications. Various techniques, such as hydrothermal, solvo-thermal and biosynthesis, have been reported for synthesizing these materials, etc. Among these, biosynthesis is eco-friendly, cost-effective, and less toxic than conventional chemical methods. The prime focuses of this review are to elaborate biosynthesis of bismuth-based nanomaterials via bio-synthetic agents such as plant, bacteria and fungi and their application in wastewater treatment as anti-pathogen/photocatalyst for pollutant degradation. Besides this, future perspectives have been presented for the upcoming research in this field, along with concluding remarks.

Bismuth oxybromide/bismuth oxyiodide nanojunctions decorated on flexible carbon fiber cloth as easily recyclable photocatalyst for removing various pollutants from wastewater

Various semiconductor powders (such as bismuth oxybromide/bismuth oxyiodide (BiOBr/BiOI) nanojunctions) can photodegrade wastewater efficiently, but their practical application is limited by poor recovery performance. To address the problem, we report the construction of BiOBr/BiOI nanojunctions on flexible carbon fiber cloth (CFC) substrate as an easily recycled photocatalyst by the dipping-solvothermal-dipping-solvothermal four-step method. CFC/BiOBr/BiOI is composed of CFC substate and two layers of nanosheets, while BiOBr nanosheets (thickness: 10-30 nm, diameter: 200-400 nm) were grown in the inner layer and BiOI nanosheets (thickness: 50-80 nm, diameter:300-600 nm) were grown in the outer layer. CFC/BiOBr/BiOI (4 × 4 cm²) can effectively photodegrade 97.7% acid orange 7 (AO7), 91.3% levofloxacin (LVFX) and 97.8% tetracycline (TC) within 120 min under the illumination of visible-light, better than CFC/BiOBr (73.2% AO7, 71.6% LVFX and 81.6% TC). Furthermore, superoxide radical (•O₂^-) and hydroxyl radical (•OH) are the main active substances during removing LVFX by CFC/BiOBr/BiOI. Besides, CFC/BiOBr/BiOI can efficiently reduce 93.5% chemical oxygen demand (COD) concentration of acrylic resin production wastewater (ARPW) under visible-light illumination for 3 h, better than CFC/BiOBr (36.6% COD). Therefore, CFC/BiOBr/BiOI has broad application prospects in purifying wastewater as a new type of easily recycled photocatalyst.

Optimization of photocatalytic degradation conditions and toxicity assessment of norfloxacin under visible light by new lamellar structure magnetic ZnO/g-C3N4

Degradation of norfloxacin (NFX) by zinc oxide (ZnO)/g-C₃N₄, a magnetic sheet ZnO with g-C₃N₄ on its surface was studied. Through a new preparation system method, hydrothermal reaction provides a solid-layered magnetic ZnO material basis, and the simple thermal condensation method was used to transform the urea into g-C₃N₄ on the magnetic sheet ZnO in a uniform and orderly manner to increase the stability and photocatalytic performance of the material. Compared with previous studies, the pore volume and photocatalytic performance of the material are improved, and became more stable. By studying the degradation effect of basic and photocatalytic materials prepared in different proportions, the kinetic constant of ZGF is 0.01446 (min^-1). The response surface methodology (RSM) was used to study the optimization and effect of solution pH (4-12), photocatalyst concentration (0.2-1.8 g/L), and NFX concentration (3-15 mg/L) on the degradation rate of NFX during photocatalytic degradation. The R² value of the RSM model was 0.9656. The NFX removal rate is higher than 90% when the amount of catalyst is 1.43 g/L, the solution pH is 7.12, and the NFX concentration is less than 8.61 mg/L. After 5 cycles, the degradation rate of magnetic materials decreased to 92.8% of the first time. The capture experiment showed that the photocatalytic machine Toxicities was mainly hole action. The TOC removal rate within 2 h was 30%, a special intermediate toxicity analysis method was adopted according to the characteristics of NFX's inhibitory effect on Escherichia coli community. The toxicity of degraded NFX solution disappeared, and the possibility of non-toxic harm of by-products was verified. LC-Q-TOF method was used to detect and analyze various intermediate products converted from NFX after photocatalytic degradation, and the photocatalytic degradation pathway of NFX was proposed.

Predicting the trend and utility of different photocatalysts for degradation of pharmaceutically active compounds: A special emphasis on photocatalytic materials, modifications, and performance comparison

The rapid rise in the healthcare sector has led to an increase in pharmaceutically active compounds (PhACs) in different aqueous bodies. The toxicity of the PhACs and their ability to persist after conventional treatment processes have escalated research in the field of photocatalytic treatment. Although different photocatalysts have been successful in degrading PhACs, their inherent drawbacks have severely limited their application on a large scale. A substantial amount of research has been aimed at overcoming the high cost of the photocatalytic material, low quantum yield, the formation of toxic end products, etc. Hence, to further research in this field, researchers must have a fair idea of the current trends in the application of different photocatalysts. In this article, the trends in the use of various photocatalysts for the removal of different PhACs have been circumscribed. The performance of different groups of photocatalysts to degrade PhACs from synthetic and real wastewater has been addressed. The drawbacks and advantages of these materials have been compared, and their future in the field of PhACs removal has been predicted using S-curve analysis. Zinc and titanium-based photocatalysts were efficient under UV irradiation, while bismuth and graphene-based materials exhibited exemplary performance in visible light. However, iron-based compounds were found to have the most promising future, which may be because of their magnetic properties, easy availability, low bandgap, etc. Different modification techniques, such as morphology modification, doping, heterojunction formation, etc., have also been discussed. This study may help researchers to clarify the current research status in the field of photocatalytic treatment of PhACs and provide valuable information for future research.

BiOBr/Ag/AgBr heterojunctions decorated carbon fiber cloth with broad-spectral photoresponse as filter-membrane-shaped photocatalyst for the efficient purification of flowing wastewater

The development of recyclable photocatalysts with broad-spectral photoresponse has drawn much attention for the practical application in flowing wastewater treatment. Herein, we have reported the construction of BiOBr/Ag/AgBr junctions on carbon fiber cloth (CFC) as broad-spectral-response filter-membrane-shaped photocatalyst that is efficient and easily recyclable. With CFC as the substrate, BiOBr nanosheets (diameter: 0.5-1 μm) were firstly synthesized by a hydrothermal method, and then Ag/AgBr nanoparticles (size: 100-300 nm) were prepared on the surface of CFC/BiOBr by using a chemical bath deposition route. CFC/BiOBr/Ag/AgBr presents superior flexibility and wide UV-Vis-NIR photoabsorption (from 200 to 1000 nm). Under visible light irradiation, CFC/BiOBr/Ag/AgBr (area: 4 × 4 cm²) can remove 99.8% rhodamine B (RhB), 99.0% acid orange 7 (AO7), and 93.0% tetracycline (TC) after 120 min, better than CFC/BiOBr (95.4% RhB, 55.0% AO7 and 91.2% TC). Interestingly, when CFC/BiOBr/Ag/AgBr is served as a filter-membrane in a photoreactor to purify the flowing sewage (RhB, rate: ~1.5 L h^-1), the degradation rate of RhB goes up to 90.0% after ten filtering grades. Therefore, CFC/BiOBr/Ag/AgBr has great potential to purify the flowing wastewater as a novel filter-membrane-shaped photocatalyst.