Application of response surface methodology in electrochemical degradation of amoxicillin with Cu-PbO2 electrode: Optimization and mechanism

PANI/GO and Sm co-modified Ti/PbO2 dimensionally stable anode for highly efficient amoxicillin degradation: Performance assessment, impact parameters and degradation mechanism

The abuse and uncontrolled discharge of antibiotics present a severe threat to environment and human health, necessitating the development of efficient and sustainable treatment technology. In this work, we employ a facile one-step electrodeposition method to prepare polyaniline/graphite oxide (PANI/GO) and samarium (Sm) co-modified Ti/PbO2 (Ti/PbO2-PANI/GO-Sm) electrode for the degradation of amoxicillin (AMX). Compared with traditional Ti/PbO2 electrode, Ti/PbO2-PANI/GO-Sm electrode exhibits more excellent oxygen evolution potential (2.63 V) and longer service life (56 h). In degradation experiment, under optimized conditions (50 mg L-1 AMX, 20 mA cm-2, pH 3, 0.050 M Na2SO4, 25 °C), Ti/PbO2-PANI/GO-Sm electrode achieves remarkable removal efficiencies of 88.76% for AMX and 79.92% for chemical oxygen demand at 90 min. In addition, trapping experiment confirms that ·OH plays a major role in the degradation process. Based on theoretical calculation and liquid chromatography-mass spectrometer results, the heterocyclic portion of AMX molecule is more susceptible to ·OH attacks. Thus, this novel electrode offers a sustainable and efficient solution to address environmental challenges posed by antibiotic-contaminated wastewater.

Photo-electrochemical activation of persulfate for the simultaneous degradation of microplastics and personal care products

The recent widespread use of microplastics (MPs), especially in pharmaceuticals and personal care products (PPCPs), has caused significant water pollution. This study presents a UV/electrically co-facilitated activated persulfate (PS) system to co-degrade a typical microplastic polyvinyl chloride (PVC) and an organic sunscreen p-aminobenzoic acid (PABA). We investigated the effect of various reaction conditions on the degradation. PVC and PABA degradation was 37% and 99.22%, respectively. Furthermore, we observed alterations in the surface topography and chemical characteristics of PVC throughout degradation. The possible degradation pathways of PVC and PABA were proposed by analyzing the intermediate products and the free radicals generated. This study reveals the co-promoting effect of multiple mechanisms in the activation by ultraviolet light and electricity.

Nanomaterial-Coated Carbon-Fiber-Based Multicontact Array Sensors for In Vitro Monitoring of Serotonin Levels

In this study, we demonstrated the fabrication of multicontact hierarchical probes for the in vitro detection of serotonin levels. The basic three-dimensional (3D) bendable prototypes with 3 (C1), 6 (C2), or 9 (C3) contact surfaces were printed from polymeric resin via the digital light processing (DLP) technique. We chose ultrasonicated carbon fiber strands to transform these designs into multicontact carbon fiber electrodes (MCCFEs). The exposed carbon fiber (CF) surfaces were modified with aminopropyl alkoxysilane (APTMS), followed by the subsequent loading of palladium nanoclusters (PdNPs) to build active recording sites. CF functionalization with PdNPs was achieved by the wet chemical reduction of Pd(II) to Pd(0). The MCCFE configurations demonstrated an enhancement in the electroactive surface area and an improved voltammetric response toward 5-HT oxidation by increasing the points of the contacts (i.e., from C1 to C3). These MCCFEs are comparable to 3D-protruding electrodes as they can enable multipoint analyte detection. Along with the electrode patterns, morphological irregularities associated with both Pd-doped and undoped CFs supported the creation of proximal diffusion layers for facile mass transfer. Low detection limits of 0.8-10 nM over a wide concentration range, from 0.005 nM to 1 mM, were demonstrated. The MCCFE sensors had a relatively low standard deviation value of ∼2%. This type of sensitive and cost-effective electrochemical sensor may prove useful for collecting electrical impulses and long-term monitoring of 5-HT in vivo in addition to in vitro testing.

Preparation of Ti/SnO2-Sb/La-βPbO2 electrode and its application in the degradation of some pollutants including prednisolone and 8-Hydroxyquinoline

In this work, a novel La-doped βPbO₂ (Ti/SnO₂-Sb/La-βPbO₂) was prepared using electrodeposition method and applied to the degradation of prednisolone (PRD), 8-Hydroxyquinoline (8-HQ), and other typical organic pollutants. Compared with the conventional electrode Ti/SnO₂-Sb/βPbO₂, La₂O₃ doping enhanced oxygen evolution potential (OEP), reactive surface area, stability and repeatability of the electrode. The 10 g L^-1 of La₂O₃ doping exhibited the highest electrochemical oxidation capability of the electrode with [•OH]ss being determined at 5.6 × 10^-13 M. The quenching experiments were conducted to confirm the main oxidizing species (here: •OH) in the electrochemical process. The study showed that the pollutants were removed in the electrochemical (EC) process with different degradation rates and indicated that the second-order rate constant of organic pollutants towards •OH (k_OP,•OH) has a linear relationship with the degradation rate of organic pollutants (k_OP) in the electrochemical process. Another new finding in this work is that a regression line of k_OP,•OH and k_OP can be used to estimate k_OP,•OH of an organic chemical, which cannot be determined using the competition method. k_PRD,•OH and k_8-HQ,•OH were determined to be 7.4 × 10⁹ M^-1 s^-1 and (4.6-5.5) × 10⁹ M^-1 s^-1, respectively. Compared with conventional supporting electrolyte (like SO₄^2-), H₂PO₄^- and HPO₄^2- improved k_PRD and k_8-HQ by 1.3-1.6-fold, while SO₃^2- and HCO₃^- inhibited k_PRD and k_8-HQ significantly, down to 80%. Additionally, the degradation pathway of 8-HQ was proposed based on the detection of intermediates from GC-MS.

Degradation of antibiotics by electrochemical advanced oxidation processes (EAOPs): Performance, mechanisms, and perspectives

Global consumption and discharge of antibiotics have led to the rapid development and spread of bacterial antibiotic resistance. Among treatment strategies, electrochemical advanced oxidation processes (EAOPs) are gaining popularity for treating water/wastewater containing antibiotics due to their high efficiency and easiness of operation. In this review, we summarize various forms of EAOPs that contribute to antibiotic degradation, including common electrochemical oxidation (EO), electrolyte enhanced EO, electro-Fenton (EF) processes, EF-like process, and EAOPs coupling with other processes. Then we assess the performance of various EAOPs in antibiotic degradation and discuss the influence of key factors, including electrode, initial concentration and type of antibiotic, operation conditions, electrolyte, and water quality. We also review mechanisms and degradation pathways of various antibiotics degradation by EAOPs, and address the species and toxicity of intermediates produced during antibiotics treatment. Finally, we highlight challenges and critical research needs to facilitate the application of EAOPs in antibiotic treatment.

A review of radical and non-radical degradation of amoxicillin by using different oxidation process systems

Pharmaceutical compounds have piqued the interest of researchers due to an increase in their demand, which increases the possibility of leakage into the environment. Amoxicillin (AMX) is a penicillin derivative used for the treatment of infections caused by gram-positive bacteria. AMX has a low metabolic rate in the human body, and around 80-90% is unmetabolized. As a result, AMX residuals should be treated immediately to avoid further accumulation in the environment. Advanced oxidation process techniques are an efficient way to degrade AMX. This review attempts to collect, organize, summarize, and analyze the most up to date research linked to the degradation of AMX by different advanced oxidation process systems including photocatalytic, ultrasonic, electro-oxidation, and advanced oxidation process-based on partials. The main topics investigated in this review are degradation mechanism, degradation efficiency, catalyst stability, the formation of AMX by-products and its toxicity, in addition, the influence of different experimental conditions was discussed such as pH, temperature, scavengers, the concentration of amoxicillin, oxidants, catalyst, and doping ratio. The degradation of AMX could be inhibited by very high values of pH, temperature, AMX concentration, oxidants concentration, catalyst concentration, and doping ratio. Several AMX by-products were discovered after oxidation treatment, and several of them had lower or same values of LC₅₀ (96 h) fathead minnow of AMX itself, such as m/z 384, 375, 349, 323, 324, 321, 318, with prediction values of 0.70, 1.10, 1.10 0.42, 0.42, 0.42, and 0.42 mg/L, respectively. We revealed that there is no silver bullet system to oxidize AMX from an aqueous medium. However, it is recommended to apply hybrid systems such as Photo-electro, Photo-Fenton, Electro-Fenton, etc. Hybrid systems are capable to cover the drawbacks of the single system. This review may provide important information, as well as future recommendations, for future researchers interested in treating AMX using various AOP systems, allowing them to improve the applicability of their systems and successfully oxidize AMX from an aqueous medium.

Bibliometric analysis of global research progress on electrochemical degradation of organic pollutants

As a result of anthropogenic action, an increasing amount of toxic organic compounds has been released into the environment. These pollutants have adverse effects on human health and wildlife, which has motivated the development of different types of technologies for the treatment of effluents and contaminated environments. The electrochemical degradation of organic pollutants has attracted the interest of research centers around the world for its environmental compatibility, high efficiency, and affordable cost. In the present study, a bibliometric analysis was performed using the Web of Science database in order to assess the progress of publications related to electrochemical degradation of organic pollutants between the years 2001 and 2021. The data retrieved showed a significant increase in publications related to the topic in the last 20 years. Electrochimica Acta was the magazine responsible for the largest number of publications (291, 6.52%). The studies mainly included the areas of engineering, chemistry, and environmental science ecology. China with a total of 1472 (32.96%) publications dominated research in this area, followed by Spain (436, 9.76%) and Brazil (345, 7.72%). The institutions with the highest number of contributions were the University of Barcelona and the Chinese Academy of Sciences, and the most productive authors were Brillas E. and Oturan M. A. The results of this study provide important references and information on possible research directions for future investigations on electrochemical degradation of organic pollutants.

Multilayered TNAs/SnO2/PPy/β-PbO2 anode achieving boosted electrocatalytic oxidation of As(III)

Dealing with arsenic pollution has been of great concern owing to inherent toxicity of As(III) to environments and human health. Herein, a novel multilayered SnO₂/PPy/β-PbO₂ structure on TiO₂ nanotube arrays (TNAs/SnO₂/PPy/β-PbO₂) was synthesized by a multi-step electrodeposition process as an efficient electrocatalyst for As(III) oxidation in aqueous solution. Such TNAs/SnO₂/PPy/β-PbO₂ electrode exhibited a higher charge transfer, tolerable stability, and high oxygen evolution potential (OEP). The intriguing structure with a SnO₂, PPy, and β-PbO₂ active layers provided a larger electrochemical active area for electrocatalytic As(III) oxidation. The as-synthesized TNAs/SnO₂/PPy/β-PbO₂ anode achieved drastically enhanced As(Ⅲ) conversion efficiency of 90.72% compared to that of TNAs/β-PbO₂ at circa 45.4%. The active species involved in the electrocatalytic oxidation process included superoxide radical (•O₂^-), sulfuric acid root radicals (•SO₄^-), and hydroxyl radicals (•OH). This work offers a new strategy to construct a high-efficiency electrode to meet the requirements of favorable electrocatalytic oxidation properties, good stability, and high electrocatalytic activity for As(III) transformation to As(V).

Research trends in the development of anodes for electrochemical oxidation of wastewater

The review focuses on the recent development in anode materials and their synthesis approach, focusing on their compatibility for treating actual industrial wastewater, improving selectivity, electrocatalytic activity, stability at higher concentration, and thereby reducing the mineralization cost for organic pollutant degradation. The advancement in sol–gel technique, including the Pechini method, is discussed in the first section. A separate discussion related to the selection of the electrodeposition method and its deciding parameters is also included. Furthermore, the effect of using advanced heating approaches, including microwave and laser deposition synthesis, is also discussed. Next, a separate discussion is provided on using different types of anode materials and their effect on active •OH radical generation, activity, and electrode stability in direct and indirect oxidation and future aspects. The effect of using different synthesis approaches, additives, and doping is discussed separately for each anode. Graphene, carbon nanotubes (CNTs), and metal doping enhance the number of active sites, electrochemical activity, and mineralization current efficiency (MCE) of the anode. While, microwave or laser heating approaches were proved to be an effective, cheaper, and fast alternative to conventional heating. The electrodeposition and nonaqueous solvent synthesis were convenient and environment-friendly techniques for conductive metallic and polymeric film deposition.

Electrochemical degradation performance and mechanism of dibutyl phthalate with hydrophobic PbO2 electrode

A polytetrafluoroethylene (PTFE) doped PbO₂ anode with a highly hydrophobicity was fabricated by electrodeposition method. In this process, vertically aligned TiO₂ nanotubes (TiO₂NTs) are formed by the anodic oxidation of Ti plates as an intermediate layer for PbO₂ electrodeposition. The characterization of the electrodes indicated that PTFE was successfully introduced to the electrode surface, the TiO₂NTs were completely covered with β-PbO₂ particles and gave it a large surface area, which also limited the growth of its crystal particles. Compared with the conventional Ti/PbO₂ and Ti/TiO₂NTs/PbO₂ electrode, the Ti/TiO₂NTs/PbO₂-PTFE electrode has enhanced surface hydrophobicity, higher oxygen evolution potential, lower electrochemical impedance, with more active sites, and generate more hydroxyl radicals (·OH), which were enhanced by the addition of PTFE nanoparticles. The electrocatalytic performance of the three electrodes were investigated using dibutyl phthalate (DBP) as the model pollutant. The efficiency of the DBP removal of the three electrodes was in the order: Ti/TiO₂NTs/PbO₂-PTFE > Ti/TiO₂NTs/PbO₂ > Ti/PbO₂. The degradation process followed the pseudo-first-order kinetic model well, with rate constants of 0.1326, 0.1266, and 0.1041 h^-1 for the three electrodes, respectively. The lowest energy consumption (6.1 kWh g^-1) was obtained after 8 h of DBP treatment using Ti/TiO₂NTs/PbO₂-PTFE compared to Ti/TiO₂NTs/PbO₂ (6.7 kWh g^-1) and Ti/PbO₂ (7.4 kWh g^-1) electrodes. Moreover, the effects of current density, initial pH and electrolyte concentration were investigated. Finally, the products of the DBP degradation process were verified based on gas chromatography-mass spectrometry analysis, and possible degradation pathways were described.

Electrocatalysis degradation of coal tar wastewater using a novel hydrophobic benzalacetone modified lead dioxide electrode

Coal tar wastewater is hard to degrade by traditional methods because of its toxic pollutant constituents and high concentration of aromatic hydrocarbons, especially phenolic substances. A new type of hydrophobic benzacetone modified PbO₂ anode (BA-PbO₂ electrodes) was used for the electrocatalytic treatment of coal tar wastewater in a continuous cycle reactor. The surface morphology, structure, valences of elements, hydrophobicity, hydroxyl radical (·OH) produced capacity, electrochemical properties and stability of BA-PbO₂ electrodes were characterized by SEM (scanning electron microscopy), XRD (X-ray diffraction), XPS (X-ray photoelectron spectroscopy), contact angle, a fluorescence probe test, an electrochemical workstation and accelerated life test, respectively. The BA-PbO₂ electrodes exhibited a compact structure and finely dispersed crystallize size of 4.6 nm. The optimum degradation conditions of coal tar wastewater were as follows: current density of 90 mA cm^-2, electrode gap of 1 cm and temperature at 25 °C with flow velocity of 80 L h^-1. The chemical oxygen demand (COD) removal efficiency reached 92.39% after 240 min of degradation under the optimized conditions and the after-treatment COD value was 379.51 mg L^-1 which was lower than the centralized emission standard (less than 400 mg L^-1). These findings demonstrated the feasibility and efficiency of electrocatalytically degrading coal tar wastewater by BA-PbO₂ electrodes. The possible mechanism and pathway for phenol a specific pollutant in coal tar wastewater were investigated by quantum chemistry calculations (Multiwfn) and gas chromatography-mass spectrometry (GC-MS). The toxicity of each intermediate was predicted by the ECOSAR program.

Trimetallic@Cyclodextrin Nanocomposite: Photocatalyst for Degradation of Amoxicillin and Catalyst for Esterification Reactions

The industry is looking for new materials which can respond to specific applications that exclusively advance materials can provide. In this context, nanoparticles and nanocomposites opened an interesting method for designing specific properties which can be modulated according to the requirements. The preparation of biomolecules supported trimetallic nanoparticles and some other derives is a good example of the complex systems that can be designed for getting exclusive properties. This study is based on the preparation of new cyclodextrin supported Fe/La/Zn trimetallic nanocomposite by the microemulsion technique. Photocatalytic degradation of amoxicillin was performed using cyclodextrin-Fe/La/Zn. 78% of amoxicillin photodegradation along 4 hours of photoirradiation was achieved. Finally, the catalytic nature of new material was explored for oxidation and esterification reactions. The present study revealed that this advanced multifunctional nanomaterial can be successfully employed for environmental remediation and catalytic activities.