Photo-Fenton assisted self-cleaning hybrid ultrafiltration membranes with high-efficient flux recovery for wastewater remediation

Surface Segregation Methods toward Molecular Separation Membranes

As a highly promising approach to solving the issues of energy and environment, membrane technology has gained increasing attention in various fields including water treatment, liquid separations, and gas separations, owing to its high energy efficiency and eco-friendliness. Surface segregation, a phenomenon widely found in nature, exhibits irreplaceable advantages in membrane fabrication since it is an in situ method for synchronous modification of membrane and pore surfaces during the membrane forming process. Meanwhile, combined with the development of synthesis chemistry and nanomaterial, the group has developed surface segregation as a versatile membrane fabrication method using diverse surface segregation agents. In this review, the recent breakthroughs in surface segregation methods and their applications in membrane fabrication are first briefly introduced. Then, the surface segregation phenomena and the classification of surface segregation agents are discussed. As the major part of this review, the authors focus on surface segregation methods including free surface segregation, forced surface segregation, synergistic surface segregation, and reaction-enhanced surface segregation. The strategies for regulating the physical and chemical microenvironments of membrane and pore surfaces through the surface segregation method are emphasized. The representative applications of surface segregation membranes are presented. Finally, the current challenges and future perspectives are highlighted.

β-FeOOH/TiO2/cellulose nanocomposite aerogel as a novel heterogeneous photocatalyst for highly efficient photo-Fenton degradation

The photo-Fenton reaction provides an effective strategy for the removal of organic pollution in water environments. However, it remains a great challenge to develop photo-Fenton catalysts with high photocatalytic activity, low catalyst losses and excellent recyclability. In this work, a β-FeOOH/TiO₂/cellulose nanocomposite aerogel was fabricated as an efficient and convenient heterogeneous catalyst in the photo-Fenton system via in situ synthesis of TiO₂ and β-FeOOH NPs on a cellulose-based aerogel. The cellulose aerogel not only acted as a microreactor to prevent aggregation of particles, but also acted as a supporting material to improve the stability and reusable performance of the catalyst. Meanwhile, the synergy between TiO₂ and β-FeOOH endowed the cellulose-based nanocomposite aerogel with highly efficient photo-Fenton degradation of dyes. As a result, the composite β-FeOOH/TiO₂/cellulose aerogel displayed high photocatalytic performance. Its removal efficiency of MB reached 97.2% under weak UV light for 65 min. There is no obvious decrease in the catalytic efficiency after 5 cycles, suggesting the stability and recyclability of the composite aerogel. This study provides a novel strategy for the preparation of efficient green heterogeneous catalysts by using renewable resources, and shows composite catalyst processes have great potential in wastewater treatment.

Application of Photo-Fenton-Membrane Technology in Wastewater Treatment: A Review

Photo-Fenton coupled with membrane (photo-Fenton-membrane) technology offers great potential benefits in future wastewater treatment because it can not only degrade refractory organics, but also separate different pollutants from water; additionally, it often has a membrane-self-cleaning ability. In this review, three key factors of photo-Fenton-membrane technology, photo-Fenton catalysts, membrane materials and reactor configuration, are presented. Fe-based photo-Fenton catalysts include zero-valent iron, iron oxides, Fe-metal oxides composites and Fe-based metal-organic frameworks. Non-Fe-based photo-Fenton catalysts are related to other metallic compounds and carbon-based materials. Polymeric and ceramic membranes used in photo-Fenton-membrane technology are discussed. Additionally, two kinds of reactor configurations, immobilized reactor and suspension reactor, are introduced. Moreover, we summarize the applications of photo-Fenton-membrane technology in wastewater, such as separation and degradation of pollutants, removal of Cr(VI) and disinfection. In the last section, the future prospects of photo-Fenton-membrane technology are discussed.

BSA-coated β-FeOOH nanoparticles efficiently deliver the photosensitizer chlorin e6 for synergistic anticancer PDT/CDT

Photodynamic therapy (PDT) has many exceptional advantages in cancer treatment, such as minor trauma, low toxicity side effects, and strong adaptability, effectively overcoming some obstacles of traditional therapy and providing more revolutionary opportunities for curing cancer. Chlorin e6 (Ce6) exhibits excellent singlet oxygen generation and conversion efficiency under near-infrared laser irradiation and is a promising PDT photosensitizer. However, its hydrophobicity, short half-life and lack of tumor specificity limit its in vivo anticancer application. Therefore, this work has designed and prepared a multifunctional nanoplatform, Ce6/FeOOH@BSA, to efficiently deliver Ce6. Nanoparticles exhibit excellent dispersion and stability in deionized water, PBS and DMEM, and the blood half-life is 3.98 ± 0.31 h. The nanoplatform demonstrates effective tumor targeting and accumulation, overcoming the obstacles of the biological application of Ce6. Iron ions can exert a chemodynamic therapy (CDT) effect by reacting with overexpressed H₂O₂ in the tumor to generate toxic hydroxyl radicals (·OH). Moreover, FeOOH nanoparticles effectively promote glutathione (GSH) consumption in tumor cells, which is conducive to accumulating reactive oxygen species (ROS). In brief, Ce6/FeOOH@BSA nanoparticles realize the targeted delivery of Ce6 and mediate synergistic PDT/CDT against tumors, broadening the biomedical application of nanomaterials.

Highly Efficient Oxygen-Activated Self-Cleaning Membranes Prepared by Grafting a Metal-Organic Framework-Derived Catalyst

In this study, an efficient oxygen-activated self-cleaning membrane was successfully prepared by grafting a metal-organic framework-devised catalyst (CuNi-C) onto a membrane surface, resulting in enhanced filtration performance and self-cleaning capability based on oxygen activation under mild conditions. The pore features, surface roughness, and surface hydrophilicity of the prepared membrane were analyzed and used to determine the causes of the enhanced filtration performance; the results showed that an increase in the porosity and surface roughness enhanced the permeate flux, and enhanced adsorption capacity and surface hydrophobicity improved the membrane removal efficiency. The self-cleaning mechanism was elucidated by identifying the reactive oxygen species (ROS) and detecting catalytic element valences. The results revealed that zero-valent Cu embedded into the membrane surface effectively activated natural dissolved oxygen (DO) to generate ROS that degraded organic pollutants. In this study, catalytic oxidation with DO as the oxidant was successively integrated with membrane separation to prevent membrane fouling, providing a novel direction for the development of multifunctional membranes.

Copolyamide-Clay Nanotube Polymer Composite Nanofiber Membranes: Preparation, Characterization and Its Asymmetric Wettability Driven Oil/Water Emulsion Separation towards Sewage Remediation

To address the problem of ever-increasing oily wastewater management, due to its directional liquid transport property, membranes with asymmetric wettability can be effectively used for emulsion separation. This study reports the synthesis of electrospun polymer-clay nanocomposite nanofibers, using co-polyamide polymer (COPA) and halloysite nanotubes (HA) as filler. The influence of clay content on the morphological, thermal and dielectric properties of the polymer composite nanofiber was investigated comprehensively to address the material characteristics of the developed system. The surface structure analysis and contact angle measurements of the electrospun composite nanofibers confirms the change in surface roughness and wettability when the fillers are added to the polymer. The porosity of the composite electrospun nanofiber membrane was found to be 85% with an oil adsorption capacity of 97% and water permeability of 6265 L/m2 h. Furthermore, the asymmetric wettability-driven oil/water emulsion separation abilities of the as-synthesized membranes shows that the separation efficiency of the composite fiber membrane is 10% improved compared to that of the neat fiber membrane, with improved separation time.

Efficient Fenton-Like Catalysis Boosting the Antifouling Performance of the Heterostructured Membranes Fabricated via Vapor-Induced Phase Separation and In Situ Mineralization

A photocatalytic membrane with significant degradation and antifouling performance has become an important part in wastewater treatment. However, the low catalyst loading on the polymer membrane limits its performance improvement. Herein, we fabricated poly(vinylidene fluoride) (PVDF) and poly(acrylic acid) (PAA) blend membranes with a rough surface via a vapor-induced phase separation (VIPS) process. Then Fe³⁺ was cross-linked with the carboxyl groups on the membrane surface and further in situ mineralized into β-FeOOH nanorods. The resultant membranes exhibit not only hydrophilicity and underwater superoleophobicity but also favorable separation efficiency and high water flux in oil-in-water emulsions separation. Under visible light irradiation, the membrane can degrade methylene blue (MB) to 95.2% in 180 min. More importantly, the membrane has a significant photocatalytic self-cleaning ability for crude oil with a flux recovery ratio (FRR) as high as 94.1%. This work brings a new strategy to fabricate the rough and porous surface for high loading of the hydrophilic photo-Fenton catalyst, improving the oil/water emulsion separation and antifouling performance of the membranes.

A critical review on metal complexes removal from water using methods based on Fenton-like reactions: Analysis and comparison of methods and mechanisms

Metals mainly exist in the form of complexes in urban wastewater, fresh water and even drinking water, which are difficult to remove and further harm human health. Fenton-like reaction has been used for the removal of metal complexes. Effective removal of metal complexes using Fenton-like reaction requires the removal of both metals and organic ligands, meanwhile, the fate of metals and organic pollutions must be clearly understood. Thus, this review summarizes the relevant research on metal complex removal from using Fenton-like reactions in the past ten years, with the detailed removal approaches and mechanisms analyzed. Electro-, photo-, microwave/ultrasound-Fenton reactions or the synergistic Fenton reaction have been shown to exhibit excellent metal complex treatment capabilities. Furthermore, various catalysts, such as transition metals, bimetals and metal-free catalytic systems can expand the potential applications of Fenton-like reactions. Novel Fenton reaction methods without the addition of metals or H₂O₂, with construction of a dual active center catalyst, or with the introduction of other free radicals, are all worthy of further investigation. Due to increasing levels of environmental metal and organic pollutions remediation requirements, more research is required for the development of economical and efficient novel Fenton-like processes.

Fabrication of Antiswelling Loose Nanofiltration Membranes via a "Selective-Etching-Induced Reinforcing" Strategy for Bioseparation

With diverse selectivity, higher permeance, and good antifouling property, loose polyamide nanofiltration (NF) membranes can be potentially deployed in various bioseparation applications. However, the loose NF membrane with a low crosslinking degree generally suffers from the alkali-induced pore swelling during chemical cleaning, resulting in degradation of separation performance with time. In this work, we conceive a novel strategy to tailor the separating layer through alkaline post-etching following the interfacial polymerization process, where piperazine and tannic acid (TA) were used as water-phase monomers, and trimesoyl chloride (TMC) and ferric acetylacetonate were employed as organic monomers in n-hexane. Thereinto, the polyester network formed by TA and TMC was selectively etched by alkaline treatment, thus obtaining a loose NF membrane, whose structure and performance could be facilely tailored by controlling the TA ratio and the etching pH. As a result, the well-designed loose NF membrane exhibited higher flux, better selectivity, and more stable separation performance in a long-term filtration of diluted cane molasses. Interestingly, the obtained loose NF membrane showed excellent antiswelling ability during alkaline cleaning because of network locking induced by Fe³⁺ chelation, decrease in the carboxyl proportion (more hydroxyl generation due to the ester bond hydrolysis), and enhanced interface interaction between the separation layer and the sublayer attributed to catechol adhesion effect. Therefore, such a "selective-etching-induced reinforcing" strategy could endow the polyamide NF membrane with both loose and antiswelling separation layer in a reliable and scalable way, which provides a new perspective for preparing highly selective and stable NF membrane for resource recovery.

Preparation of a PES/PFSA-g-MWCNT ultrafiltration membrane with improved permeation and antifouling properties

In this study, perfluorosulfonic acid (PFSA) was firstly grafted on multi-walled carbon nanotubes (MWCNTs) to obtain PFSA-g-MWCNT nanocomposites.

Modification of Polysulfone Ultrafiltration Membranes via Addition of Anionic Polyelectrolyte Based on Acrylamide and Sodium Acrylate to the Coagulation Bath to Improve Antifouling Performance in Water Treatment

Surface modification of polysulfone ultrafiltration membranes was performed via addition of an anionic polymer flocculant based on acrylamide and sodium acrylate (PASA) to the coagulation bath upon membrane preparation by non-solvent induced phase separation (NIPS). The effect of PASA concentration in the coagulant at different coagulation bath temperatures on membrane formation time, membrane structure, surface roughness, hydrophilic-hydrophobic balance of the skin layer, surface charge, as well as separation and antifouling performance was studied. Scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, contact angle and zeta potential measurements were utilized for membrane characterization. Membrane barrier and antifouling properties were evaluated in ultrafiltration of model solutions containing human serum albumin and humic acids as well as with real surface water. PASA addition was found to affect the kinetics of phase separation leading to delayed demixing mechanism of phase separation due to the substantial increase of coagulant viscosity, which is proved by a large increase of membrane formation time. Denser and thicker skin layer is formed and formation of macrovoids in membrane matrix is suppressed. FTIR analysis confirms the immobilization of PASA macromolecules into the membrane skin layer, which yields improvement of hydrophilicity and change of zeta potential. Modified membrane demonstrated better separation and antifouling performance in the ultrafiltration of humic acid solution and surface water compared to the reference membrane.