High-performance positively charged hollow fiber nanofiltration membranes fabricated via green approach towards polyethyleneimine layer assembly

A Selective Separation Mechanism for Mono/divalent Cations and Properties of a Hollow-Fiber Composite Nanofiltration Membrane Having a Positively Charged Surface

Positively charged nanofiltration (NF) technology is considered a green and low-cost method for mono/divalent cation separation. Nevertheless, the separation rejection mechanisms of these NF membranes have yet to be extensively investigated. In this work, we fabricated a thin-film composite (TFC) hollow-fiber (HF) NF membrane with a positively charged surface via modification of the nascent interfacial polymerization layer using a branched polyethyleneimine (BPEI)/ethanol solution. Then, we extensively investigated its selective separation mechanism for mono/divalent cations. We proposed and proved that there exists a double-charged layer near the membrane surface, which helps to repel the divalent cations selectively via Donnan exclusion while promoting the fast penetration of monovalent cations. Meanwhile, the membrane skin layer is loose and hydrophilic due to the loose BPEI structure and the abundance of amine groups, as well as the changed fabrication conditions. In this way, we achieved very good mono/divalent cation selectivity and relatively high water permeance for the as-prepared HF NF membrane. We also obtained good anti-fouling, anti-scaling, and acid resistance, and long-term stability as well, which are urgently needed during practical application. Furthermore, we successfully amplified this HF NF membrane and proved that it has broad application prospects in mono/divalent cation separation.

Polystyrene Sulfonate Particles as Building Blocks for Nanofiltration Membranes

Today the standard treatment for wastewater is secondary treatment. This procedure cannot remove salinity or some organic micropollutants from water. In the future, a tertiary cleaning step may be required. An attractive solution is membrane processes, especially nanofiltration (NF). However, currently available NF membranes strongly reject multivalent ions, mainly due to the dielectric effect. In this work, we present a new method for preparing NF membranes, which contain negatively and positively charged domains, obtained by the combination of two polyelectrolytes with opposite charge. The negatively charged polyelectrolyte is provided in the form of particles (polystyrene sulfonate (PSSA), d ~300 nm). As a positively charged polyelectrolyte, polyethyleneimine (PEI) is used. Both buildings blocks and glycerol diglycidyl ether as crosslinker for PEI are applied to an UF membrane support in a simple one-step coating process. The membrane charge (zeta potential) and salt rejection can be adjusted using the particle concentration in the coating solution/dispersion that determine the selective layer composition. The approach reported here leads to NF membranes with a selectivity that may be controlled by a different mechanism compared to state-of-the-art membranes.

High-performance cellulose acetate-based gas barrier films via tailoring reduced graphene oxide nanosheets

Improving the gas molecule barrier performance and structural stability of bio-plastic films dramatically contribute to packaging and protective fields. Herein, we proposed a novel nanocomposite film consisting of cellulose acetate (CA)/polyethyleneimine (PEI)/reduced graphene oxide (rGO)-NiCoFeO_x) with high gas barrier property by applying "molecular glue" and "nano-patching" strategies. Systematical investigations demonstrated that the CA/rGO interfacial interaction was effectively enhanced due to the "molecular glue" role of PEI chains via physical/chemical bonds and the defective regions in rGO plane were nano-patched through hydrophilic interactions between edged oxygen-containing functional groups and ultrafine NiCoFeO_x nanoparticles (~3 nm). As a result, the oxygen and moisture transmission rates of the prepared CA/PEI/rGO-NPs hybrid film were significantly reduced to 0.31 cm³ ∗ μm/(m² ∗ d ∗ kPa) and 314.23 g/m² ∗ 24 h, respectively, which were 99.60% and 54.69% lower than pristine CA films. Meanwhile, the tensile strength of hybrid film was increased from 25.90 MPa to 40.67 MPa. More importantly, the designed nanocomposite film possesses excellent structural stability without obvious GO layer shedding and hydrophobicity attenuation after persistent bending at least 100 times. The exceptional robust and high gas barrier film displays great promising application in food, agriculture, pharmaceuticals and electronic instruments packaging industry.

A nanofiltration membrane fabricated on a surfactant activated substrate with improved separation performance and acid resistance

Uniformly dispersed and enhanced amounts of PEI molecules attract drag by SDS exhibit a high crosslinking degree and smooth surface morphology.

Tailoring Charged Nanofiltration Membrane Based on Non-Aromatic Tris(3-aminopropyl)amine for Effective Water Softening

High-performance positively-charged nanofiltration (NF) membranes have a profound significance for water softening. In this work, a novel monomer, tris(3-aminopropyl)amine (TAEA), with one tertiary amine group and three primary amine groups, was blended with trace amounts of piperazine (PIP) in aqueous solution to fabricate a positively-charged NF membrane with tunable performance. As the molecular structures of TAEA and PIP are totally different, the chemical composition and structure of the polyamine selective layer could be tailored via varying the PIP content. The resulting optimal membrane exhibited an excellent water permeability of 10.2 LMH bar⁻¹ and a high rejection of MgCl₂ (92.4%), due to the incorporation of TAEA/PIP. In addition, this TAEA NF membrane has a superior long-term stability. Thus, this work provides a facile way to prepare a positively charged membrane with an efficient water softening ability.