Activation of peroxymonosulfate by CuCo2O4-GO for efficient degradation of bisphenol A from aqueous environment

Enhancement of peroxymonosulfate activation with nickel foam-supported CuCo2O4 for tetracycline degradation: Performance and mechanism insights

The modulation of bimetallic oxide structures and development of efficient, easily recoverable catalysts are expected to effectively overcome the limitations associated with powdered catalysts in activating peroxymonosulfate (PMS). In this study, CuCo2O4 was successfully immobilized on the surface of nickel foam (NF) via an electrodeposition-calcination procedure, with highly efficient activation of PMS for tetracycline (TC) degradation (0.55 min-1). Besides acting as a support carrier and providing ample active sites, NF mediated electron transport, prevented the leaching of metal ions and enhanced the efficiency of recycling. Density functional theory (DFT) calculations and experimental tests illustrated that Cu/Co dual-sites can efficiently adsorb PMS, enabling simultaneous reduction and oxidation reactions. The dual-site synergy substantially decreased the adsorption barrier and increased the electron transfer rate. Especially, the Cu+/Cu2+ redox couple acted as an electron donor and facilitated rapid charge transfer, leading to the conversion of Co3+ to Co2+. Moreover, the CuCo2O4@NF + PMS system effectively eliminated TC by employing radical pathways (SO4•-, •OH) and nonradical processes (1O2, e-). Therefore, this study introduces a new approach to overcome the limitations of powdered bimetallic oxides, providing a promising solution for practical applications.

Atomic-level investigation on significance of photoreduced Pt nanoparticles over g-C3 N4 /bimetallic oxide composites

Designing an effective photocatalyst for solar-to-chemical fuel conversion presents significant challenges. Herein, g-C3 N4 nanotubes/CuCo2 O4 (CN-NT-CCO) composites decorated with platinum nanoparticles (Pt NPs) were successfully synthesized by chemical and photochemical reductions. The size distribution and location of Pt NPs on the surface of CN-NT-CCO composites were directly observed by TEM. Extended X-ray absorption fine structure (EXAFS) spectra of Pt L3-edge for the above composite confirmed establishment of Pt-N bonds at an atomic distance of 2.09 Å in the photoreduced Pt-bearing composite, which was shorter than in chemically reduced Pt-bearing composites. This proved the stronger interaction of photoreduced Pt NPs with the CN-NT-CCO composite than chemical reduced one. The H2 evolution performance of the photoreduced (PR) Pt@CN-NT-CCO (2079 μmol h-1  g-1 ) was greater than that of the chemically reduced (CR) Pt@CN-NT-CCO composite (1481 μmol h-1  g-1 ). The abundance of catalytically active sites and transfer of electrons from CN-NT to the Pt NPs to participate in the hydrogen evolution are the primary reasons for the improved performance. Furthermore, electrochemical investigations and band edge locations validated the presence of a Z-scheme heterojunction at the Pt@CN-NT-CCO interface. This work offers unique perspectives on the structure and interface design at the atomic level to fabricate high-performance heterojunction photocatalysts.

Facilely achieved enhancement of Fenton-like reactions by constructing electric microfields

In this work, we found that the presence of non-active ZnO crystals greatly accelerated the degradation of Bisphenol A (BPA) by 3.7 folds in the peroxymonosulfate (PMS, HSO₅^-)/Co₃O₄ system. Our mechanistic study revealed that the ZnO particles would create negative electric microfields around them, which are closely related with the zeta potentials (ζ) of ZnO and affected by solution pH. According to COMSOL simulation, the electrostatic repulsion between ZnO and PMS would drive HSO₅^- toward active Co₃O₄ surface, leading to the concentration increasing of HSO₅^- around active Co₃O₄ particles, which will then improve the degradation performance. The particle size of ZnO will also affect the promoting effect greatly by COMSOL simulation. Therefore, this study for the first time reveals synergy of electric microfields for enhanced heterogeneous Fenton-like reactions, providing a low-cost and effective strategy for enhanced persulfate catalysis.

Cobalt-loaded cherry core biochar composite as an effective heterogeneous persulfate catalyst for bisphenol A degradation

Persulfate (PS)-based advanced oxidation processes have drawn tremendous attention for the degradation of recalcitrant pollutants, and cobalt composites are effective for PS activation to generate reactive species. In this study, composites of cobalt species loaded on cherry core-derived biochar (Co/C) were prepared with a one-step pyrolysis method. The Co/C catalyst was applied as a catalyst for PS activation to degrade bisphenol A (BPA). Factors influencing the degradation efficiency were examined, including the ratio of raw materials, Co/C and PS dosages, temperature, and solution pH. The Co/C catalyst prepared when the ratio of raw material was 1 : 1 (Co/C-50) could efficiently activate both peroxymonosulfate (PMS) and peroxydisulfate (PDS). When the initial concentration of BPA was 20 mg L-1, complete removal of BPA was achieved in the Co/C-50-PMS and Co/C-50-PDS systems within 8 min and 10 min, respectively. More than 70% of BPA could be mineralized in the Co/C-50-PS system. The free radical quenching experiments demonstrated that in the Co/C-50-PS system, the degradation of BPA was achieved through free radical, surface-bound free radical, and non-free radical pathways. The successful preparation of the Co/C-50-PS catalyst broadens the application of cobalt-based carbon materials in the activation of PS to remove organic pollutants.

Adding CuCo2O4-GO to inhibit bromate formation and enhance sulfamethoxazole degradation during the ozone/peroxymonosulfate process: Efficiency and mechanism

In this work, a new type of catalyst CuCo2O4-GO was synthesized as a heterogeneous catalyst, and its control effect on bromate (BrO3-)generation and sulfamethoxazole (SMX) degradation in O3/PMS process was studied. When 100 mg/L CuCo2O4-GO was added to the reaction system, the BrO3- concentration generated was 0.25 μM at pH = 7.0, 100 μM PMS addition and 1.30 mg/min ozone injection after 30 min reaction. Compared with the 6.58 μM BrO3- produced in the control group, the addition of CuCo2O4-GO prominently inhibited the generation of BrO3- and the inhibition efficiency reached 96.17 %. The addition of CuCo2O4-GO inhibited the conversion of hypobromous acid, thereby inhibiting the formation of BrO3-. Meanwhile, the first-order kinetic constant of the degradation of SMX by O3/PMS and O3/PMS/CuCo2O4-GO was 0.163 and 0.422 min-1, respectively. The addition of CuCo2O4-GO promoted the degradation of SMX and the removal efficiency was reached above 98 % after 10 min reaction. According to the optimization of the GO loading ratio, it was found that CuCo2O4-GO with 20 % GO loading had the best promotion effect on the degradation of SMX, and almost completely inhibited the formation of BrO3-. Finally, in the repeated cycle experiment, CuCo2O4-GO could maintain its high catalytic activity and still had a high removal effect on SMX after three repeated uses. Besides, the BrO3- inhibition efficiency was above 80 % after two repeated uses. Therefore, adding synthetic CuCo2O4-GO is an effective way to control the formation of BrO3- and enhance the degradation of SMX in the O3/PMS process.

Rice husk biochar modified-CuCo2O4 as an efficient peroxymonosulfate activator for non-radical degradation of organic pollutants from aqueous environment

A series of rice husk biochar (RHBC) modified bimetallic oxides were prepared using a simple pyrolysis method to activate peroxymonosulfate (PMS) for the degradation of acid orange G (OG). The results demonstrated that 50 mg L⁻¹ OG was completely decomposed by 1 mM PMS activated with 100 mg L⁻¹ RHBC–CuCo₂O₄ within 15 min at initial pH 3.4. The OG degradation rate constant k of RHBC–CuCo₂O₄/PMS (0.95 × 10⁻¹ min⁻¹) was five times greater than that of CuCo₂O₄/PMS (0.19 × 10⁻¹ min⁻¹), suggesting that the introduction of RHBC significantly improved the activity of bimetallic oxides. The effects of the initial pH, catalyst dosage, PMS concentration and reaction temperature on OG removal were also studied. The degradation products of OG were analysed using a gas chromatography-mass spectrometer (GC-MS). Electron paramagnetic resonance (EPR) and quenching experiments showed that singlet oxygen (¹O₂) was the main active species. The RHBC–CuCo₂O₄/PMS oxidation system is not only unaffected by inorganic anions (Cl⁻, NO₃⁻, HCO₃⁻) and humic acid (HA), but also could remove other typical pollutants of acetaminophen (ACT), sulfathiazole (STZ), rhodamine B (RhB), and bisphenol A (BPA). These findings show that RHBC–CuCo₂O₄ has great potential for practical applications in the removal of typical organic pollutants.

A series of rice husk biochar (RHBC) modified bimetallic oxides were prepared using a simple pyrolysis method to activate peroxymonosulfate (PMS) for the degradation of acid orange G (OG).

An ultrasensitive ratiometric immunosensor based on the ratios of conjugated distyrylbenzene derivative nanosheets with AIECL properties and electrochemical signal for CYFRA21-1 detection

Aggregation-induced electrochemiluminescence reagent, a distyrylbenzene derivative with donor-acceptor conjugated nanosheet structure, namely TPAPCN, was used as a trace label and modified on the electrode through the formation of classical sandwich complex of antibody-antigen-antibody in this work. In aggregate state, TPAPCN with twisted structure was limited in nanometer space through intermolecular π - π stacking interactions, which not only restricts the intramolecular motions but also combines a large number of singlet excitons to greatly trigger electrochemiluminescence (ECL). The ECL signal of this system enhanced with more captured cytokeratin 19 fragment 21-1 (CYFRA21-1) on the modified electrode. Three-dimensional graphene/platinum nanoparticles with large specific surface, and excellent electroconductivity and biocompatibility were prepared and acted as excellent carriers for thionine handling (3D-GN/PtNPs/Th), which was employed for improving the loading of antibodies and generating internal electrochemical signal. Consequently, a novel ratiometric sandwich immunosensor for CYFRA21-1 detection was fabricated based on TPAPCN and 3D-GN/PtNPs/Th, that is, a rapid and reliable detection was achieved through the ratio between ECL and electrochemical signals. The prepared sensor performed good linearity in the range of 50 fg/mL to 1 ng/mL with a detection limit as low as 16 fg/mL. Moreover, the detection results revealed well in the analysis of human serum samples, demonstrating a significant application for clinical monitoring and biomolecules detection.