Electrochemically capacitive deionization of copper (II) using 3D hierarchically reduced graphene oxide architectures

Copper hexacyanoferrate/carbon sheet combination with high selectivity and capacity for copper removal by pseudocapacitance

The efficient capture of copper ions (Cu2+) in wastewater has dual significance in pollution control and resource recovery. Prussian blue analog (PBA)-based pseudocapacitive materials with open frameworks and abundant metal sites have attracted considerable attention as capacitive deionization (CDI) electrodes for copper removal. In this study, the efficiency of copper hexacyanoferrate (CuHCF) as CDI electrode for Cu2+ treating was evaluated for the first time upon the successful synthesis of copper hexacyanoferrate/carbon sheet combination (CuHCF/C) by introducing carbon sheet as conductive substrate. CuHCF/C exhibited significant pseudocapacitance and high specific capacitance (52.92 F g-1) through the intercalation, deintercalation, and coupling of Cu+/Cu2+ and Fe2+/Fe3+ redox pairs. At 0.8 an applied voltage and CuSO4 feed liquid concentration of 100 mg L-1, the salt adsorption capacity was 134.47 mg g-1 higher than those of most reported electrodes. Moreover, CuHCF/C demonstrated excellent Cu2+ selectivity in multi-ion coexisting solutions and in actual wastewater experiments. Density functional theory (DFT) calculations were employed to elucidate the mechanism. This study not only reveals the essence of Cu2+ deionization by PBAs pseudocapacitance with promising potential applications but also provides a new strategy for selecting efficient CDI electrodes for Cu2+ removal.

Electric Field-Assisted Uptake of Hexavalent Chromium Ions with In Situ Regeneration of Carbon Monolith Adsorbents

The uptake of hexavalent chromium (Cr(VI)) ions from wastewater is of great significance for environmental remediation and resource utilization. In this study, a self-designed instrument equipped with an oxidized mesoporous carbon monolith (o-MCM) as an electro-adsorbent is developed. o-MCM with a super hydrophilic surface displayed a high specific surface area (up to 686.5 m²  g^-1 ). With the assistance of an electric field (0.5 V), the removal capacity of Cr(VI) ions is as high as 126.6 mg g^-1 , much higher than that without an electric field (49.5 mg g^-1 ). During this process, no reduction reaction of Cr(VI) to Cr(III) ions is observed. After adsorption, the reverse electrode with 10 V is used to efficiently desorb the ions on the carbon surface. Meanwhile, the in situ regeneration of carbon adsorbents can be obtained even after ten recycles. On this basis, the enrichment of Cr(VI) ions in a special solution is achieved with the assistance of an electric field. This work lays a foundation for the uptake of heavy metal ions from wastewater with the assistance of the electric field.

Ion Exchange Conversion of Na-Birnessite to Mg-Buserite for Enhanced and Preferential Cu2+ Removal via Hybrid Capacitive Deionization

Layered manganese oxides (LMOs) have recently been demonstrated to be one of the most promising redox-active material platforms for electrochemical removal of heavy metal ions from solution via capacitive deionization (CDI). However, the impact of interlayer spacing of LMOs on the deionization performance of electrodes in a hybrid capacitive deionization (HCDI) system with an LMO cathode and a carbon anode (i.e., LMO/C electrodes), and their phase transformation behaviors, particularly during the desalination operations, have yet to be extensively evaluated. In this study, we thoroughly evaluate Mg-buserite obtained by ion exchange of fresh Na-birnessite and Na- and K-birnessite as HCDI electrodes to remove copper ions (Cu²⁺) from saline solutions. Among the three LMO/C electrodes, the Mg-buserite/C (MgB/C) electrodes demonstrate the best deionization performance in terms of salt adsorption capacity (SAC), electrosorption rate, and cycling stability, followed by K-birnessite/C (KB/C) and Na-birnessite/C (NaB/C). More importantly, MgB/C exhibits the highest Cu²⁺ ion adsorption capacity (IAC) of 89.3 mg Cu²⁺ per gram electrode materials at a cell voltage of 1.2 V in 500 mg L^-1 CuCl₂ solution, with an IAC retention as high as 96.3% after 60 charge/discharge cycles. Given that electrosorption of Cu²⁺ ions is often competed by alkali and alkaline earth metal ions, our data reveal that the MgB/C electrodes demonstrate selectivities of 4.7, 7.7, and 8.1 for Cu²⁺ over Na⁺, Ca²⁺, and Mg²⁺, respectively. Moreover, X-ray diffraction and spectroscopic analyses show that the enhanced deionization performance and preference for Cu²⁺ are mainly attributed to the expanded interlayer spacing of LMO minerals. This study provides a promising strategy for tailoring LMO minerals for improving their electrosorption capacity and preference for copper ions from a multivalent-ion solution via an HCDI platform.

Potential-Mediated Recycling of Copper From Brackish Water by an Electrochemical Copper Pump

Copper ions (Cu2+ ) disposed to the environment at massive scale pose severe threat to human health and waste of resource. Electrochemical deionization (EDI) which captures ions by electrical field is a promising technique for water purification. However, the removal capacity and selectivity toward Cu2+ are unsatisfying, yet the recycling of the captured copper in EDI systems is yet to be explored. Herein, an efficient electrochemical copper pump (ECP) that can deliver Cu2+ from dilute brackish water into much more concentrated solutions is constructed using carbon nanosheets for the first time, which works based on reversible electrosorption and electrodeposition. The trade-off between the removal capacity and reversibility is mediated by the operation voltage. The ECP exhibits a removal capacity of 702.5 mg g-1 toward Cu2+ and a high selectivity coefficient of 64 for Cu2+ /Na+ in the presence of multiple cations; both are the highest reported to date. The energy consumption of 1.79 Wh g-1 is among the lowest for EDI of copper. More importantly, the Cu species captured can be released into a 20-fold higher concentrated solution. Such a high performance is attributed to the optimal potential distribution between the two electrodes that allows reversible electrodeposition and efficient electrosorption.

Recent progress in materials and architectures for capacitive deionization: A comprehensive review

Capacitive deionization is an emerging and rapidly developing electrochemical technique for water desalination across the globe with exponential growth in publications. There are various architectures and materials being explored to obtain utmost electrosorption performance. The symmetric architectures consist of the same material on both electrodes, while asymmetric architectures have electrodes loaded with different materials. Asymmetric architectures possess higher electrosorption performance as compared with that of symmetric architectures owing to the inclusion of either faradaic materials, redox-active electrolytes, or ion specific pre-intercalation material. With the materials perspective, faradaic materials have higher electrosorption performance than carbon-based materials owing to the occurrence of faradaic reactions for electrosorption. Moreover, the architecture and material may be tailored in order to obtain desired selectivity of the target component and heavy metal present in feed water. In this review, we describe recent developments in architectures and materials for capacitive deionization and summarize the characteristics and salt removal performances. Further, we discuss recently reported architectures and materials for the removal of heavy metals and radioactive materials. The factors that affect the electrosorption performance including the synthesis procedure for electrode materials, incorporation of additives, operational modes, and organic foulants are further illustrated. This review concludes with several perspectives to provide directions for further development in the subject of capacitive deionization. PRACTITIONER POINTS: Capacitive deionization (CDI) is a rapidly developing electrochemical water desalination technique with exponential growth in publications. Faradaic materials have higher salt removal capacity (SAC) because of reversible redox reactions or ion-intercalation processes. Combination of CDI with other techniques exhibits improved selectivity and removal of heavy metals. Operational parameters and materials properties affect SAC. In future, comprehensive experimentation is needed to have better understanding of the performance of CDI architectures and materials.

A review on recent advances in electrodeionization for various environmental applications

The growing contamination of ecosystems necessitates the development of long-term pollution-removal technologies. Electrodeionization, in notably, has newly proven as an efficient method for removing ionic chemicals from polluted waterways. The fact that continuous electrodeionization is a greener technique is most probably the biggest cause for its success. It replaces the toxic chemicals typically required to replenish resins with electric power, therefore eliminating the wastewater involved with resin renewal. In water treatment, electrodeionization solves some of the drawbacks of ion exchange resin beds, particularly ion dumping as beds expire. This comprehensive review explores the theory, principles, and mechanisms of ion movement and separation in an electrodeionization unit. Also, it investigated the construction and usage, notably in removing heavy metal and its current developments in electrodeionization unit. Recent advances in Electrodeionization like polarity reversal, Resin wafer Electrodeionization, membrane free Electrodeionization, and electrostatic shielding with novel materials and hybrid process along with Electrodeionization were addressed. Further advancements are expected in electrodeionization systems that exhibit better efficacy while running at lower costs due to decreased energy usage, rendering them appealing for industrial scale up across a wide range of applications across the world.

Experimental and theoretical study of a new CDI device for the treatment of desulfurization wastewater

According to the characteristics of desulfurization wastewater, A new capacitive deionization (CDI) device was designed to study the desalination characteristics of desulfurization wastewater in this paper. The experiments investigated the desalination efficiency under different conditions which find that the best desalination efficiency is achieved at a voltage of 1.2V, pH=11 and 50°C. Besides, ion adsorption is more favorable under acidic and alkaline conditions. The anion and cation removal performance experiments showed that the order of cation removal is Mg²⁺>Na⁺>Ca²⁺>K⁺ and the order of anion removal is Cl^->CO₃^2->NO₃^->SO₄^2->HCO₃^-. The mechanism of CDI was studied and analyzed by the isothermal adsorption model and COMSOL simulation software. It was found that the Freundlich model and Redlich-Peterson model have a good fit with the experimental results. The experiments show that the CDI device has excellent stability. CDI device was used to treat actual desulfurization wastewater. Furthermore, the study provides theoretical support for the industrial application of CDI for desulfurization wastewater treatment in the future. Graphical abstract.

Electrochemical fabrication of polyaniline/graphene paper (PANI/GP) supercapacitor electrode materials on free-standing flexible graphene paper

Free-standing flexible supercapacitive electrodes have practical application for wearable energy storage devices. In this paper, graphene paper (GP), a flexible electrode substrate, was prepared by one-step reduction of graphene oxide (GO) using HI solution. GP can be used independently as a flexible electrode with specific capacitance of 227 F/g. In order to make up for the shortage of GP specific capacitance storage, polyaniline (PANI) with high specific capacitance and good electrical conductivity was selected to composite with GP by electrochemical polymerization approach. This method to fabricate electrode material by direct electrochemical polymerization avoids the use of conductive binder and organic solvent. Owing to the specific capacitance contribution of PANI and GP, the PANI/GP composites exhibit higher specific capacitance when the polymerization time is 30 s and the polymerization voltage is 0.8 V. At 1 A/g current density, the specific capacitance of composite is up to 759 F/g, which is 3.34 times of neat GP.

Transformation of Glass Fiber Waste into Mesoporous Zeolite-Like Nanomaterials with Efficient Adsorption of Methylene Blue

Recycling and reusing glass fiber waste (GFW) has become an environmental concern, as the means of disposal are becoming limited as GFW production increases. Therefore, this study developed a novel, cost-effective method to turn GFW into a mesoporous zeolite-like nanomaterial (MZN) that could serve as an environmentally benign adsorbent and efficient remover of methylene blue (MB) from solutions. Using the Taguchi optimizing approach to hydrothermal alkaline activation, we produced analcime with interconnected nanopores of about 11.7 nm. This MZN had a surface area of 166 m2 g−1 and was negatively charged with functional groups that could adsorb MB ranging from pH 2 to 10 and all with excellent capacity at pH 6.0 of the maximum Langmuir adsorption capacity of 132 mg g−1. Moreover, the MZN adsorbed MB exothermically, and the reaction is reversible according to its thermodynamic parameters. In sum, this study indicated that MZN recycled from glass fiber waste is a novel, environmentally friendly means to adsorb cation methylene blue (MB), thus opening a gateway to the design and fabrication of ceramic-zeolite and tourmaline-ceramic balls and ceramic ring-filter media products. In addition, it has environmental applications such as removing cation dyes and trace metal ions from aqueous solutions and recycling water.