Design strategies for C-phycocyanin purification: Process influence on purity grade

Green and sustainable extraction of phycocyanin from Spirulina platensis by temperature-sensitive polymer-based aqueous two-phase system and mechanism study

In this study, a sustainable and environmentally friendly method was developed for the enrichment and purification of phycocyanin from Spirulina platensis. This was achieved by utilizing a temperature-sensitive polymer, Pluronic F68, in an aqueous two-phase solvent system. The phase behavior of the temperature-sensitive polymer-based biphasic system was evaluated. The extraction conditions were optimized by both single-factor experiments and response surface methodology. Under the optimal conditions, the upper polymer-rich phase was recycled for sustainable phycocyanin extraction, resulting in a grade of 3.23 during the third extraction cycle. Pluronic F68 could be efficiently recovered and reused during the extraction process. The interaction mechanism between Pluronic F68 and phycocyanin was systematically studied using FT-IR and fluorescence analysis. This was further complemented by static and dynamic calculation of molecular motion through molecular docking and molecular dynamics simulation, indicating that hydrophobic segment of Pluronic F68 played a key role in the binding process with phycocyanin.

Studying the impact of phycoerythrin on antioxidant and antimicrobial activity of the fresh rainbow trout fillets

Marine cyanobacteria present a significant potential source of new bioactive compounds with vast structural diversity and relevant antimicrobial and antioxidant activities. Phycobiliproteins (PBPs) like phycocyanin (PC), phycoerythrin (PE), and water-soluble cyanobacterial photosynthetic pigments, have exhibited strong pharmacological activities and been used as natural food additives. In this study, phycoerythrin (PE) isolated from a marine strain of cyanobacterium Nostoc sp. Ft salt, was applied for the first time as a natural antimicrobial as well as an antioxidant to increase the shelf life of fresh rainbow trout i.e., (Oncorhynchus mykiss) fillets. Fresh trout fillets were marinated in analytical grade PE (3.9 μg/mL) prepared in citric acid (4 mg/mL), and stored at 4 °C and 8 °C for 21 days. Microbiological analysis, antioxidant activity and organoleptic evaluation of both control and treated fish fillets were then statistically compared. The results demonstrated noticeable (P < 0.05) differences in the microbial counts, antioxidant activity, and organoleptic characteristic values between PE-treated and non-treated groups. In addition, we observed that treating fresh fish fillets with a PE solution leads to a significant increase in shelf life by at least 14 days. Consequently, PE could be an alternative to synthetic chemical additives since it does not contain the potentially dangerous residues of the synthetic chemical additives and is thus healthier to the consumers.

Effects of chitosan molecular weight and mass ratio with natural blue phycocyanin on physiochemical and structural stability of protein

Phycocyanin (PC), an algae-extracted colorant, has extensive applications for its water-solubility and fresh blue shade. When PC is added to acidified media, dispersions are prone to aggregate and decolorize into cloudy systems. For palliating this matter, chitosan with high, medium, and low molecular weights (HMC, MMC, and LMC) were adopted in PC dispersions, and their protective effects were compared based on physiochemical stabilities. The optimal mass ratio between chitosan and PC was identified as 1:5 based on preliminary evaluations and was supported by the higher ζ-potential (31.0-32.1 mV), lower turbidity (39.6-43.6 NTU), and polyacrylamide gel electrophoresis results. Through interfacial and antioxidant capacity analyses, LMC was found to display a higher affinity to PC, which was also confirmed by SEM images and the maximum increase in transition temperature of their complex (155.70 °C) in DSC measurements. The mechanism of electrostatic interaction reinforced by hydrophobic effects and hydrogen bonding was elucidated by FT-IR and Raman spectroscopy. Further comprehensive stability evaluations revealed that, without light exposure, LMC kept PC from internal secondary structure to external blueness luster to the maximum extent. While with light exposure, LMC was not so flexible as HMC, to protect chromophores from attack of free radicals.

The Experimental Development of Emulsions Enriched and Stabilized by Recovering Matter from Spirulina Biomass: Valorization of Residue into a Sustainable Protein Source

Spirulina consists of a cluster of green-colored cyanobacteria; it is commonly consumed as a food or food supplement rich in bioactive compounds with antioxidant activity, predominantly C-phycocyanin (C-PC), which is related to anti-inflammatory action and anticancer potential when consumed frequently. After C-PC extraction, the Spirulina residual biomass (RB) is rich in proteins and fatty acids with the potential for developing food products, which is interesting from the circular economy perspective. The present work aimed to develop a vegan oil-in-water emulsion containing different contents of Spirulina RB, obtaining a product aligned with current food trends. Emulsions with 3.0% (w/w) of proteins were prepared with different chickpea and Spirulina RB ratios. Emulsifying properties were evaluated regarding texture and rheological properties, color, antioxidant activity, and droplet size distribution. The results showed that it was possible to formulate stable protein-rich emulsions using recovering matter rich in protein from Spirulina as an innovative food ingredient. All the concentrations used of the RB promoted the formulation of emulsions presenting interesting rheological parameters compared with a more traditional protein source such as chickpea. The emulsions were also a source of antioxidant compounds and maintained the color for at least 30 days after production.

Phycobiliproteins from algae: Current updates in sustainable production and applications in food and health

Phycobiliproteins are light-harvesting complexes found mainly in cyanobacteria and red algae, playing a key role in photosynthesis. They are extensively applied in food, cosmetics, and biomedical industry due to bright color, unique fluorescence characteristics and diverse physiological activities. They have received much attention in the past few decades because of their green and sustainable production, safe application, and functional diversity. This work aimed to provide a comprehensive summary of parameters affecting the whole bioprocess with a special focus on the extraction and purification, which directly determines the application of phycobiliproteins. Food grade phycobiliproteins are easy to prepare, whereas analytical grade phycobiliproteins are extremely complex and costly to produce. Most phycobiliproteins are denatured and inactivated at high temperatures, severely limiting their application. Inspired by recent advances, future perspectives are put forward, including (1) the mutagenesis and screening of algal strains for higher phycobiliprotein productivity, (2) the application of omics and genetic engineering for stronger phycobiliprotein stability, and (3) the utilization of synthetic biology and heterologous expression systems for easier phycobiliprotein isolation. This review will give a reference for exploring more phycobiliproteins for food and health application development.

Exploring the Benefits of Phycocyanin: From Spirulina Cultivation to Its Widespread Applications

Large-scale production of microalgae and their bioactive compounds has steadily increased in response to global demand for natural compounds. Spirulina, in particular, has been used due to its high nutritional value, especially its high protein content. Promising biological functions have been associated with Spirulina extracts, mainly related to its high value added blue pigment, phycocyanin. Phycocyanin is used in several industries such as food, cosmetics, and pharmaceuticals, which increases its market value. Due to the worldwide interest and the need to replace synthetic compounds with natural ones, efforts have been made to optimize large-scale production processes and maintain phycocyanin stability, which is a highly unstable protein. The aim of this review is to update the scientific knowledge on phycocyanin applications and to describe the reported production, extraction, and purification methods, including the main physical and chemical parameters that may affect the purity, recovery, and stability of phycocyanin. By implementing different techniques such as complete cell disruption, extraction at temperatures below 45 °C and a pH of 5.5-6.0, purification through ammonium sulfate, and filtration and chromatography, both the purity and stability of phycocyanin have been significantly improved. Moreover, the use of saccharides, crosslinkers, or natural polymers as preservatives has contributed to the increased market value of phycocyanin.

Novel Biorefinery Approach for Phycocyanin Extraction and Purification and Biocrude Production from Arthrospira platensis

A new biorefinery from Arthrospira platensis was proposed to obtain phycocyanin (PC) and a biocrude by hydrothermal liquefaction (HTL). PC is a high-added-value phycobiliprotein widely used as a food colorant and in the nutraceutical and pharmaceutical industries. However, the use of conventional solvents in the extraction process and the purity grade of the extract are shortcomings in bioproduct production. PC was extracted using a reusable ionic liquid [EMIM][EtSO₄], achieving a PC purity of the lowest commercial grade. Therefore, two downstream processes were applied: (1) dialysis + precipitation and (2) aqueous two-phase system (ATPS) + dialysis + precipitation. After the second purification process, the PC purity increased remarkably to reach the analytical grade for pharmaceutical and nutraceutical applications. The waste biomass (WB) obtained in the PC extraction was valorized by hydrothermal liquefaction (HTL) to produce a biocrude. The biocrude yield and composition remarkably enhanced using isopropanol at 350 °C as a cosolvent.

Aqueous Two-Phase Systems Based on Ionic Liquids and Deep Eutectic Solvents as a Tool for the Recovery of Non-Protein Bioactive Compounds—A Review

Aqueous two-phase systems (ATPS) based on ionic liquids (IL) and deep eutectic solvents (DES) are ecofriendly choices and can be used to selectively separate compounds of interest, such as bioactive compounds. Bioactive compounds are nutrients and nonnutrients of animal, plant, and microbial origin that benefit the human body in addition to their classic nutritional properties. They can also be used for technical purposes in food and as active components in the chemical and pharmaceutical industries. Because they are usually present in complex matrices and low concentrations, it is necessary to separate them in order to increase their availability and stability, and ATPS is a highlighted technique for this purpose. This review demonstrates the application of ATPS based on IL and DES as a tool for recovering nonprotein bioactive compounds, considering critical factors, results and the most recent advances in this field. In addition, the review emphasizes the perspectives for expanding the use of nonconventional ATPS in purification systems, which consider the use of molecular modelling to predict experimental conditions, the investigation of diverse compounds in phase-forming systems, the establishment of optimal operational parameters, and the verification of bioactivities after the purification process.

Improvement in the Sequential Extraction of Phycobiliproteins from Arthrospira platensis Using Green Technologies

Arthrospira platensis (commercially known as Spirulina) is an excellent source of phycobiliproteins, especially C-phycocyanin. Phycobiliproteins are significant bioactive compounds with useful biological applications. The extraction process plays a significant role in downstream microalga production and utilisation. The important pigments found in A. platensis include chlorophyll and carotenoids as nonpolar pigments and phycobiliproteins as polar pigments. Supercritical fluid extraction (SFE) as a green extraction technology for the high-value metabolites of microalgae has potential for trends in food and human health. The nonpolar bioactive compounds, chlorophyll and carotenoids of A. platensis, were primarily separated using supercritical carbon dioxide (SC-CO₂) solvent-free fluid extraction pressure; the temperature and ethanol as cosolvent conditions were compared. The residue from the A. platensis cells was subjected to phycobiliprotein extraction. The phosphate and water extraction of A. platensis SFE residue were compared to evaluate phycobiliprotein extraction. The SFE results exhibited higher pressure (350 bar) and temperature extraction (50 °C) with ethanol-free extraction and increased nonpolar pigment. Phycobiliprotein yield was obtained from A. platensis SFE residue by ethanol-free buffer extraction as a suitable process with antioxidant properties. The C-phycocyanin was isolated and enhanced to 0.7 purity as food grade. This developed method can be used as a guideline and applied as a sustainable process for important pigment extraction from Arthrospira microalgae.

Phycobiliproteins, the pigment-protein complex form of natural food colorants and bioactive ingredients

Currently, the use of synthetic pigments in foods is restricted since synthetic pigments are proven and suspected to be harmful to human health. Phycobiliproteins (PBPs), existed in phycobilisomes (PBSs) of algae, are a kind of pigment-proteins with intense color. The specific color of PBPs (red and blue) is given by the water-soluble open-chained tetrapyrrole chromophore (phycobilin) that covalently attaches to the apo-protein via thioether linkages to cysteine residues. According to the spectral characteristics of PBPs, they can be categorized as phycoerythrins (PEs), phycocyanins (PCs), allophycocyanins (APCs), and phycoerythrocyanins (PECs). PBPs can be used as natural food colorants, fluorescent substances, and bioactive ingredients in food applications owing to their color characteristics and physiological activities. This paper mainly summarizes the extraction and purification methods of the PBPs and reviews their characteristics and applications. Moreover, the use of several strategies such as additives, microencapsulation, electrospray, and cross-linking to improve the stability and bioavailability of PBPs as well as the future outlooks of PBPs as natural colorants in food commercialization are elucidated.

Green Extraction Process of Food Grade C-phycocyanin: Biological Effects and Metabolic Study in Mice

This study aimed to evaluate different parameters in the green process of organic Spirulina biomass (SB) C-phycocyanin (C-PC) extraction to understand the impact on weight and oral glucose tolerance of C-PC extract in Swiss mice fed with a high-fat diet (HFD). The proximate composition and antioxidant activity were analyzed in Spirulina by-products: SB, C-PC, and Remaining biomass (RB). The protein content on a dry basis was 52.05% in SB and 61.16% in RB and 118.97 μg/g in C-PC. The antioxidant activity was equal for SB and C-PC but higher than RB. However, RB can be considered a promising ingredient, promoting the sustainable use of the whole SB. Swiss mice were distributed in five groups: control diet (CD), HFD, HFD plus Spirulina biomass (HFDS), HFD plus C-PC (HFDC), and HFD plus remaining biomass (HFDR). HFDS increased the delta weight of the animals and showed glucose intolerance compared to the CD and HFDC groups. The results demonstrated that the supplementation of 500 mg/kg of body weight of SB in the HFDS group did not show antiobesogenic potential with an HFD, but it is essential to conduct further studies to bring other interesting responses regarding C-PC biological in vivo effects.

Current research approaches in downstream processing of pharmaceutically relevant proteins

Biopharmaceuticals and their production are on the rise. They are needed to treat and to prevent multiple diseases. Therefore, an urgent need for process intensification in downstream processing (DSP) has been identified to produce biopharmaceuticals more efficiently. The DSP currently accounts for the majority of production costs of pharmaceutically relevant proteins. This short review gathers essential research over the past 3 years that addresses novel solutions to overcome this bottleneck. The overview includes promising studies in the fields of chromatography, aqueous two-phase systems, precipitation, crystallization, magnetic separation, and filtration for the purification of pharmaceutically relevant proteins.

C-phycocyanin decreases proliferation and migration of melanoma cells: In silico and in vitro evidences

The incidence and number of deaths caused by melanoma have been increasing in recent years, and the pigment C-phycocyanin (C-PC) appears as a possible alternative to treat this disease. So, the objective of this study was to combine in silico and in vitro analysis to understand the main anti-melanoma pathways exerted by C-PC. We evaluated the ability of C-PC to bind to the main cellular targets related in the progression of melanoma through molecular docking, and the reflection of this bind in the biological effects in the B16F10 cell line through in vitro analysis. Our results showed that C-PC was able to bind BRAF and MEK, which are related to the signal transduction pathway for proliferation and survival. There was also an interaction between C-PC and cyclin-dependent kinase 4 and 6. In vitro analysis demonstrated that C-PC decreased B16F10 cell proliferation, as observed by cell viability and mitotic index assays. C-PC also interacted with matrix metalloproteinase 2 and 9 and N-cadherin, which may have caused the decrease in cell migration observed in vitro. Besides that, C-PC interacts with VEGF, a factor responsible for regulating the proliferation and cellular invasion pathways. Finally, C-PC did not alter the cell viability of the non-tumoral melanocytes. Therefore, C-PC is a strong anti-tumor candidate for the treatment of melanoma, since it acts in different cellular pathways of melanoma, without causing damage to non-tumoral cells.

Phycocyanin, a super functional ingredient from algae; properties, purification characterization, and applications

Phycocyanins (PCYs) are a group of luxuriant bioactive compounds found in blue-green algae with an estimated global market of about US$250 million within this decade. The multifarious markets of PCYs noted by form (e.g. powder or aqueous forms), by grade (e.g. analytical, cosmetic, or food grades), and by application (such as biomedical, diagnostics, beverages, foods, nutraceuticals and pharmaceuticals), show that the importance of PCYs cannot be undermined. In this comprehensive study, an overview on PCY, its structure, and health-promoting features are diligently discussed. Methods of purification including chromatography, ammonium sulfate precipitation and membrane filtration, as well as characterization and measurement of PCYs are described. PCYs could have many applications in food colorants, fluorescent markers, nanotechnology, nutraceutical and pharmaceutical industries. It is concluded that PCYs offer significant potentials, although more investigations regarding its purity and safety are encouraged.