Fabrication of Fe-doped cobalt zeolitic imidazolate framework derived from Co(OH)2 for degradation of tetracycline via peroxymonosulfate activation

Role of Interface of Metal-Organic Frameworks and Their Composites in Persulfate-Based Advanced Oxidation Process for Water Purification

The persulfate activation-based advanced oxidation process (PS-AOP) is an important technology in wastewater purification. Using metal-organic frameworks (MOFs) as heterogeneous catalysts in the PS-AOP showed good application potential. Considering the intrinsic advantages and disadvantages of MOF materials, combining MOFs with other functional materials has also shown excellent PS activation performance and even achieves certain functional expansion. This Review introduces the classification of MOFs and MOF-based composites and the latest progress of their application in PS-AOP systems. The relevant activation/degradation mechanisms are summarized and discussed. Moreover, the importance of catalyst-related interfacial interaction for developing and optimizing advanced oxidation systems is emphasized. Then, the interference behavior of environmental parameters on the interfacial reaction is analyzed. Specifically, the initial solution pH and coexisting inorganic anions may hinder the interfacial reaction process via the consumption of reactive oxygen species, affecting the activation/degradation process. This Review aims to explore and summarize the interfacial mechanism of MOF-based catalysts in the activation of PS. Hopefully, it will inspire researchers to develop new AOP strategies with more application prospects.

Removal of oxytetracycline from water by S-doped MIL-53(Fe): Synergistic effect of surface adsorption and persulfate activation

In this study, a novel catalyst based on MIL-53(Fe) was synthesized and modified through sublimed sulfur (S-MIL-53(Fe)) to induce a synergistic effect of surface adsorption and persulfate activation. The S-doped modification not only increased the surface area but also accelerated the electron transfer process of the iron cycle. The performance of the newly synthesized S-MIL-53(Fe) adsorptive catalyst was evaluated by chemical adsorption and peroxydisulfate (PDS) activated removal of an emerging pollutants, oxytetracycline (OTC). The S-MIL-53(Fe) adsorptive catalyst was able to adsorb 61.7% of OTC after 120 min, and the removal efficiency reached 84.8% within 5 min after PDS dosing. The boosting effect of sulfur on the system was confirmed by characterization analysis and experimental testing. Even after 7 cycles, the removal efficiency of S-MIL-53(Fe) (69.0%) for OTC remained superior to that of pure MIL-53(Fe) (25.1%). Additionally, the adsorption kinetics and adsorption isotherm model of the material were investigated. The possible OTC degrading process was proposed based on radical quenching and electron paramagnetic resonance (EPR). This study provides a feasible way to fabricate an S-doped MIL-53(Fe) adsorptive catalyst for the remediation of antibiotics-containing wastewater.

Mechanisms of interaction between metal-organic framework-based material and persulfate in degradation of organic contaminants (OCs): Activation, reactive oxygen generation, conversion, and oxidation

Metal-organic frameworks (MOFs)-based materials have been of great public interest in persulfate (PS)-based catalytic oxidation for wastewater purification, because of their excellent performance and selectiveness in organic contaminants (OCs) removal in complex water environments. The formation, fountainhead and reaction mechanism of reactive oxygen species (ROSs) in PS-based catalytic oxidation are crucial for understanding the principles of PS activation and the degradation mechanism of OCs. In the paper, we presented the quantitative structure-activity relationship (QSAR) of MOFs-based materials for PS activation, including the relationship of structure and removal efficiency, active sites and ROSs as well as OCs. In various MOFs-based materials, there are many factors will affect their performances. We discussed how various surface modification projects affected the characteristics of MOFs-based materials used in PS activation. Moreover, we revealed the process of ROSs generation by active sites and the oxidation of OCs by ROSs from the micro level. At the end of this review, we putted forward an outlook on the development trends and faced challenges of MOFs for PS-based catalytic oxidation. Generally, this review aims to clarify the formation mechanisms of ROSs via the active sites on the MOFs and the reaction mechanism between ROSs and OCs, which is helpful for reader to better understand the QSAR in various MOFs/PS systems.

Bamboo charcoal fiber bundles loaded MOF-derived magnetic Co/CoO porous polyhedron for efficiently catalytic degradation of tetracyclines hydrochloride

The health of living things and the ecosystem of the planet have both been negatively impacted by antibiotic residue in the water environment. There has been a lot of interest in the catalyst made of metal-carbon compounds from MOFs as a potential solution for activating peroxymonosulfate (PMS) to produce reactive oxygen species to catalyze the degradation of residual antibiotics. In this study, zeolitic imidazolate frameworks (ZIF-67) on bamboo fiber bundles (BFB) were pyrolyzed to produce magnetic Co/CoO nanoparticles with porous polyhedrons mounted on bamboo charcoal fiber bundles (BCFB)(BCFB@PCo/CoO). Specific surface area of obtained BCFB@PCo/CoO with abundant active sites arrives at 302.41 m2/g. The catalytic degradation efficiency of Tetracycline hydrochloride (TCH), a target contaminant, could reach up to 99.94% within 15 minutes (PMS = 0.4g/L, Cat. = 0.2g/L). The effects of potential factors, including PMS dosage, interference ions, and temperature, on catalytic degradation efficiencies were investigated. Magnetic recovery and antimicrobial properties of the BCFB@PCo/CoO were also evaluated and the possible degradation pathways were explored. Catalytic mechanism explorations of BCFB@PCo/CoO/PMS system reveal MOF-derived magnetic Co/CoO nanoparticles embedded in BCFB promote the synergistic interaction of both radicals and non-radical pathways for catalytic degradation of TCH. The novel BCFB@PCo/CoO provides an alternative to deal with wastewater containing antibiotics.

Architecture and active motif engineering of N-CoS2@C yolk-shell nanoreactor for boosted tetracycline removal via peroxymonosulfate activation: Performance, mechanism and destruction pathways

Rational construction of yolk-shell architecture with regulated binding configuration is crucially important but challengeable for antibiotic degradation via peroxymonosulfate (PMS) activation. In this study, we report the utilization of yolk-shell hollow architecture consisted of nitrogen-doped cobalt pyrite integrated carbon spheres (N-CoS₂@C) as PMS activator to boost tetracycline hydrochloride (TCH) degradation. The creation of yolk-shell hollow structure and nitrogen-regulated active site engineering of CoS₂ endow the resulted N-CoS₂@C nanoreactor with high activity for PMS activating toward TCH degradation. Intriguingly, the N-CoS₂@C nanoreactor exhibits an optimal degradation performance with a rate constant of 0.194 min^-1 toward TCH via PMS activation. The ¹O₂ and SO₄^•- species are demonstrated as the dominant active substances for TCH degradation through quenching experiments and electron spin resonance characterization. The possible degradation mechanism, intermediates and degradation pathways for TCH removal over the N-CoS₂@C/PMS nanoreactor are unveiled. Graphitic N, sp²-hybrid carbon, oxygenated group (C-OH) and Co species are verified as the possible catalytic sites of N-CoS₂@C for PMS activation toward TCH removal. This study offers a unique strategy to engineer sulfides as highly efficient and promising PMS activators for antibiotic degradation.

Fabrication of In-S-co-doped two-dimensional BiOCl coupling with surface hydroxylation toward simultaneously efficient charge separation and redox capability for photocatalytic water remediation

Tailoring energy band structure of bismuth oxychloride (BiOCl)-based photocatalysts by virtue of the metal and/or non-metal elements is one of the promising strategy to address environmental issues, especially plays a crucial role in water remediation. However, it still remains a great challenge to balance the light-harvesting and charge carriers separation. Herein, a feasible strategy was proposed for the simultaneous integration of energy-band modulation and surface hydroxylation to alleviate the as-mentioned contradiction and long-standing issues. By using a simple one-pot hydrothermal method, In-S-co-doped BiOCl photocatalyst coupling with surface hydroxylation (denoted as In/BOC-S-OH) was prepared by the simultaneous co-precipitation and ripening process and exhibited a good photocatalytic activity for removing tetracycline (TC) under visible light-irradiation than the counterparts of In-doped BiOCl (In/BOC), S-doped BiOCl (In/BOC-S) or surface -OH modification BiOCl (In/BOC-OH). Such satisfied photocatalytic efficiency benefits from the synergistic effect on the visible light capture, charge migration and separation associated with the introduction of intermediate energy levels and surface defect, respectively. Accompanying with the introduction of In and S hetero-atoms intercalation, both the potentials of valence and conduction bands were adjusted and the reduction of the bandgap could promote the capture of photons. Meanwhile, the powerful polarization effect associated with the non-uniform charge distribution could promote the special separation of carriers. More importantly, the surface defects induced by hydroxylation could act as traps for photogenerated electrons to stimulate the rapid separation of carriers, thereby causing the cleavage of antibiotics on the catalytic surface. This research offers a reliable strategy and promising scheme via effective solar energy conversion and charge carrier separation to advance photocatalytic wastewater remediation.

MOFFeCo/B-CN composites achieve efficient degradation of antibiotics in a non-homogeneous concurrent photocatalytic-persulfate activation system

We synthesized an M_FeCoB_0.4CN_x% (MOF-Fe/Co nanosheets/boron-doped g-C₃N₄) composite catalyst for enhancing the concurrent photocatalytic-persulfate activation (CPPA) system and achieved efficient degradation of antibiotics. The role of MOF-Fe/Co is to activate persulfate, while boron-doped g-C₃N₄ can generate photogenerated electrons for the reduction of Co³⁺/Fe³⁺ to enhance the regeneration of the active center. The rate constant for Tetracycline degradation by the CPPA system was 4.74 and 7.54 times higher than the photocatalytic and persulfate-activated systems, respectively. This composite was shown to be practical and economically viable for antibiotic degradation. The degradation behavior was explored based on experiments, and molecular orbitals and Fukui functions were obtained by density functional theory calculations. Mechanisms were investigated using reactive oxygen species trapping studies and electron spin resonance, and the process was explained in terms of the charge population and electron density difference of MOF-Fe/Co nanosheets. The CPPA system is an ecologically benign technology for removing antibiotic-related risks to the environment and human health.

Effects of environmental and anthropogenic factors on the distribution and abundance of microplastics in freshwater ecosystems

Although microplastics are emerging marine pollutants that have recently attracted increasing attention, it is still difficult to identify their sources. This study reviewed 6487 articles to determine current research trends and found 237 effective concentration points after sorting, which were distributed in four regions and related to freshwater ecosystems. Results found that 15 environmental variables represented natural and anthropogenic environmental characteristics, of which seven environmental variables were selected for experimental modelling. Random forest models fitted sample data, thus facilitating the identification of regional microplastics distribution. The global random forest model had random forest importance scores (RFISs) for gross domestic product, population, and the proportion of agricultural land use were 15.76 %, 15.64 %, and 14.74 %, respectively; these indicate that human activities significantly affected the global distribution of microplastics. In Asia, agriculture and urban activities are the main sources of microplastics, with an RFIS of 11.58 % and 12.24 % for the proportion of agricultural and urban land use, respectively. Activities in urban areas were determined to be the main influencing factors in North America, with an RFIS of 13.92 % for the proportion of urban land use. Agricultural activities were the main influencing factors in Europe, with RFISs for the proportion of agricultural land use of 16.90 %. Our results indicate that region-specific policies are required to control microplastics in different regions, with soil composition being a latency factor that affects microplastics' distribution.

Recent progress of functional metal-organic framework materials for water treatment using sulfate radicals

Human health is being threatened by the ever-increasing water pollution. Sulfate radical (SO₄^•-)-based advanced oxidation processes (SR-AOPs) are rapidly being developed and gaining considerable attention due to their high oxidation potential and selectivity as a way to purify water by degrading organic contaminants in it. Among the catalytic materials that can activate the precursor to generate SO₄^•-, metal-organic frameworks (MOFs) are the most promising heterogeneous catalytic material in SR-AOPs because of their various structure possibilities, large surface area, ordered porous structure, and regular activation sites. Herein, an in-depth overview of MOFs and their derivatives for water purification with SR-AOPs is provided. The latest studies on pristine MOFs, MOF composites, and MOF derivatives (metal oxides, metal-carbon hybrids, and carbon materials) are summarized. The mechanisms of decomposition of pollutants in water via radical and non-radical pathways are also discussed. This review suggests future research directions for water purification through MOF-based SR-AOP.

Understanding the mechanism of interfacial interaction enhancing photodegradation rate of pollutants at molecular level: Intermolecular π-π interactions favor electrons delivery

Uncovering the interaction between photocatalyst and reaction substrate as well as subsequent electron transfer process is critical to achieve high-performance photodegradation of pollutants. Herein, based on the reduced density gradient (RDG) method, we visualize the simulation of the π-π interactions between photocatalyst (g-C₃N₄) and pollutant molecule (flumequine, FLU). Results revealed that π-π interactions between g-C₃N₄ and FLU favor electrons delivery, resulting in enhanced charge separation efficiency and direct hole oxidation of FLU. Moreover, it is found that the charge transfer rate is determined by the valence band (VB) level of g-C₃N₄ and E_HOMO of FLU, of which the deeper VB position of g-C₃N₄ favors faster charge transfer, leading to further enhancement in photocatalytic degradation rate of FLU. Additionally, the possible degradation pathways of FLU were proposed by theoretical calculation and the determined intermediates. Our work afforded a new insight into pollutants degradation and the rational design of highly efficient photocatalysts.

Oxidative degradation of tetracycline using peroxymonosulfate activated by cobalt-doped pomelo peel carbon composite

Tetracycline (TC) is a typical ecotoxic antibiotic, which easily causes bacterial resistance. Therefore, it is necessary to remove TC from the water environment. In recent years, advanced oxidation processes (AOPs) rely on the use of highly reactive oxidizing sulfate radical which is turning into an increasingly popular as a tool of the removal of TC. In this study, cobalt-doped pomelo peel carbon composite (Co-PPCC) was prepared by the impregnation coprecipitation method to activate peroxymonosulfate (PMS) to remove TC. SEM, BET, XRD, FTIR, XPS, TGA, and other analytical techniques indicated that a carbon composite catalyst with excellent performance has been successfully prepared. TC was removed by the synergistic effect of adsorption and catalytic degradation processes. The adsorption capacity was limited (only approximately 20% within 60 min) and tending to saturation, which indicated that the removal of TC in the Co-PPCC/PMS system was mainly due to oxidative degradation. The influence of the Co-PPCC and PMS dosage, initial TC concentration, initial pH values, and coexisting anions on the removal efficiency of TC was investigated. When the Co-PPCC catalyst dosage was 1 g/L, PMS concentration was 2 g/L, and pH value was 11, the removal efficiency of TC with a concentration of 50 mg/L reached 99% within 60 min. Free radical quenching experiment and electron paramagnetic resonance (EPR) analysis indicated that the free radical and non-radical degradation processes exist in the Co-PPCC/PMS/TC system. The main degradation products and the possible transformation pathways of TC were explored by LC-MS. In addition, after four cycles of Co-PPCC tests, the removal efficiency of TC can reach 64%. This study provides a new method to reuse abandoned pomelo peels and synthesize an economical and environmentally friendly catalyst for activating peroxymonosulfate to remove TC antibiotics in water.

Cu-Doped magnetic loofah biochar for tetracycline degradation via peroxymonosulfate activation

The Cu-doped deactivated magnetic biochar exhibited high PMS activation to degrade TC with a high removal rate of 97.6%.

Fabrication of Co3O4-Bi2O3-Ti catalytic membrane for efficient degradation of organic pollutants in water by peroxymonosulfate activation

In this study, a functionalized Co₃O₄-Bi₂O₃-Ti catalytic membrane (CBO-Ti-M) was prepared and applied for removing organic pollutants via activating peroxymonosulfate (PMS) in the dead-end filtration mode. Characterizations including scanning electron microcopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed that the Co₃O₄-Bi₂O₃ catalyst was successfully supported on the Ti membrane. The CBO-Ti-M /PMS system could efficiently remove various organic pollutants such as sulfamethoxazole, methyl orange, bisphenol A and methylene blue, achieving removal efficiencies of 98.0%-99.5%. The effects of PMS concentration, flow rate and solution environment on degradation efficiency were investigated in detail. Furthermore, quenching experiments, electron spin resonance (ESR) and in-situ open circuit potential (OCP) tests collectively demonstrated that singlet oxygen as well as the non-radical electron transfer pathway mainly contributed in the reaction mechanism. The synergistic effect of Co and Bi was illustrated according to XPS results, and the possible degradation pathway of MB was proposed based on LC-MS analysis. Reusability test showed that pollutant removal efficiency with the CBO-Ti-M /PMS system remained stable in four runs and limited metal leaching was observed.

Peroxymonosulfate activation by tea residue biochar loaded with Fe3O4 for the degradation of tetracycline hydrochloride: performance and reaction mechanism

The recycling of agricultural and food waste is an effective way to reduce resource waste and ameliorate the shortage of natural resources. The treatment of antibiotic wastewater is a current research hotspot. In this study, waste tea residue was used as a raw material to prepare biochar (T-BC) and loaded with Fe3O4 as a catalyst to activate peroxymonosulfate (PMS) for oxidative degradation of tetracycline hydrochloride (TCH). Analysis techniques such as BET, SEM, XRD, FT-IR, XPS and VSM indicated that the heterogeneous catalyst (Fe3O4@T-BC) with good surface properties and magnetic properties was successfully prepared. The results of batch-scale experiments illustrated that when the dose of the Fe3O4@T-BC catalyst was 1 g L-1, the concentration of PMS was 1 g L-1, and the initial pH was 7, the degradation rate of TCH with a concentration of 50 mg L-1 reached 97.89% after 60 minutes of reaction. When the initial pH was 11, the degradation rate of TCH reached 99.86%. After the catalyst was recycled four times using an external magnet, the degradation rate of TCH could still reach 71.32%. The data of removal of TCH could be best fitted by a pseudo-first-order model. The analysis of the degradation mechanism through a free radical quenching experiment and EPR analysis, as well as the exploration of TCH intermediate products and reaction paths through the LC-MS method, all confirmed that the Fe3O4@T-BC prepared by this method is expected to become a cost-effective and environmentally friendly heterogeneous catalyst for activating persulfate degradation of tetracycline antibiotics.