A novel microbial synthesis of silver nanoparticles: Its bioactivity, Ag/Ca-Alg beads as an effective catalyst for decolorization Disperse Blue 183 from textile industry effluent

Improved application of immobilized Enterobacter cloacae into a bio-based polymer for Reactive Blue 19 removal, an eco-friendly advancement in potential decolorizing systems

The widespread use of highly complex synthetic dyes like reactive dyes in the textile industry has some adverse environmental impacts and deserves close attention. Biological treatment of these effluents utilizing various species of bacteria with remarkable efficiency in dye removal is still considered promising. Our current study deals with immobilizing an isolated bacterial strain into calcium alginate (Ca/Alg) gel beads and using it to treat pernicious pollutants like synthetic dyes. A potential Reactive Blue 19 (RB19)-degrading Enterobacter cloacae strain A1 was isolated from the Kashan textile industry and was characterized by 16S rDNA gene sequencing. The decolorization ability of strain A1 was assessed by time-based studies using free bacterial cells/immobilized in Ca/Alg. Based on the results of the 16S rDNA gene sequencing, it appears that strain A1 belonged to E. cloacae, with a 99.74% similarity. The findings suggest that immobilized strain A1 accomplished maximum decolorization activity compared with the free cells. The immobilized strain could utterly decompose and decolorize 0.05 mg/mL of RB19 within 48 h, while the free bacterial strain decolorized RB19 within 5 days. Moreover, Ca/Alg gel beads can maintain their efficiency for over three decolorization cycles. Further infrared spectroscopy (FTIR) and gas chromatograph mass spectrometer (GC/MS) investigation declared complete RB19 decomposition on reaction products. Artemia salina was used to investigate the toxicity of dye and its degraded metabolites. The LC50 values signified the pure dye as very toxic with 0.01 mg/mL concentration, while after-treatment products showed no toxic effect on larvae. This immobilization technique increased the applicability of bacterial strain for dye removal. It was beneficial for the decolorization of RB19 from textile wastewater due to a remarkable reduction in time. Notably, strain A1-immobilized beads can maintain their activity for three consecutive decolorization cycles without a considerable decrease in efficiency. PRACTITIONER POINTS: The remarkable capacity of immobilized Enterobacter cloacae strain A1 for Reactive Blue 19 (RB19) removal Immobilized A1 strain showed two-fold higher removal than free one over 48 h A promising method for enhancing RB19 decolorization Decolorization was due to degradation based on UV-Vis, FTIR, and GC/MS analysis Non-toxic posttreatment products for Artemia.

Novel environmental method for enhanced biodegradation of contaminated wastewater via immobilizing nanoparticles on a new bacterial strain isolated industrial textile

Biological processes comprising bacteria, fungi, yeast, and algae received increasing interest for dye degradation due to their cost-effectiveness and eco-friendly nature. Hence, the current study aims to investigate the ability of the photocatalytic performance of N-S co-doped anatase TiO₂ (NSTO) nanoparticles immobilized on isolated industrial textile bacteria (ITB) for degradation of basic blue 41 (BB 41). To prove the effect of improving the surface area of NSTO, NSTO also was immobilized on glass balls (NSTO-GB). NSTO nanoparticles were synthesized using sol-gel methods, and characterization of NSTO and NSTO-GB were measured using SEM, TEM, XPS, and DLS analysis. The results showed that the average size of NSTO was 50-60 nm. Moreover, the morphology and surface microstructure of ITB and ITB-NSTO were determined by the SEM, XPS technique. According to the results, ITB has a rod structure, NSTO nanoparticles are placed on the surface of ITB. However, NSTO was attached to the surface of ITB with the hydroxyl group. The ITB-NSTO indicated a higher BB 41 degradation yield (99%) than pure NSTO (65%) and ITB (74%). The effect of different factors was evaluated on biodegradation by ITB-NSTO. The high biodegradation was obtained in ITB (10 mg), NSTO (50 mg), BB41 (50 ppm), and pH 11. The GC-Mass, LC-Mass, and FT-IR analysis, which monitored the BB 41 degradation efficiency, proved the degradation efficiency by 99%. In the following, the toxicities of BB 41 solution before and after degradation were accessed through the brine shrimp lethality assay (BSLA) and seed germination assay, which displayed a considerable reduction in BB 41 after degradation. Toxicity results exhibited that ITB-NSTO has potential for industrial application.

A novel combination of immobilized Enterococcus casseliflavus sp. nov. with silver nanoparticles into a reusable matrix of Ca-Alg beads as a new strategy for biotreatment of Disperse Blue 183: Insights into metabolic characterization, biotoxicity, and mutagenic properties

Recent advances in immobilized biologic systems for decolorizing azo dyes are gaining great attention due to microorganisms like bacteria and nanoparticles that could stimulate decolorization. Enhanced decolorization performance was observed in this study, indicating the great potential of the immobilized complex of bacterial cells and AgNPs as an alternative to the traditional biological processes to improve the performance of biological systems. The biodegradation and decolorization of Disperse Blue183 (DB 183) were investigated utilizing a novel combination of Enterococcus casseliflavus strain A₂ mediated by silver nanoparticles synthesized by Marinospirillum alkaliphilum strain N in three different conditions. Ⅰ: free bacterial strain A₂ (100% dye removal in 72 h), Ⅱ: immobilized bacterial strain A₂ in Ca-Alg beads (100% dye removal in 15 h), and Ⅲ: immobilized bacterial strain A₂ with silver nanoparticles (AgNPs) as support in Ca-Alg beads (100% dye removal in 9 h). The presence of bacterial cells and nanoparticles in Ca-Alg beads was assessed and proved by scanning electron microscope (SEM) and X-ray energy diffraction (EDX) analysis. Moreover, DB 183 and its decolorization metabolites were evaluated by applying UV-Vis, infrared spectroscopy (FTIR), and GC/MS, and the results showed that the dye was degraded. The antimicrobial effect, brine shrimp toxicity (BST) test, and mutagenicity assay in the presence and absence of metabolic activation (+S9/-S9) were run to assess DB 183 and metabolite obtained from biodegradation. The antimicrobial activity of DB 183 disappeared after treatment. Further, the results of the BST test determined that the dye has moderate biotoxicity (LC₅₀:0.064 mg/mL), and the after-treatment product was not toxic. According to the Ames test, DB 183 had mutagenicity effect (69-84%), and the metabolic activation increased the mutagenicity of the dye) 12-25%). However, the percentage mutagenicity of decolorization products decreased, ranging from 50 to 80% without activation (-S9) and 83-96% in present activation (+S9). This work used the immobilized bacterial cells and AgNPs Ca-Alg gel beads for the first time to introduce this kind of system as a suitable technique for rapid decolorization. Using this application enables a remarkable reduction in the time dedicated to the bioremediation of dyeing wastewater.

Photocatalytic and Antimicrobial Activities of Biosynthesized Silver Nanoparticles Using Cytobacillus firmus

The toxicity of the ecosystem has increased recently as a result of the increased industrial wastewater loaded with organic contaminants, including methylene blue (MB), which exerts serious damage to the environment. Thus, the present work aims to green the synthesis of silver nanoparticles (Ag-NPs) and to evaluate their degradability of notorious MB dye, as well as their antimicrobial activities. Ag-NPs were synthesized by Cytobacillus firmus extract fully characterized by UV-vis, TEM, DLS, XRD, and FTIR. Ag-NPs showed good antibacterial and antifungal activities against Escherichia coli ATCC 25922, Enterococcus feacalis ATCC 29212, Pseudomonas aeruginosa ATCC 27853, Staphylococcus aureus ATCC 25923, and Candida albicans ATCC 90028. Moreover, Ag-NPs exhibited a high biodegradability level (98%) of MB dye after 8 h of co-incubation in the presence of sunlight. Additionally, the phytotoxicity of treated MB dye-contaminated water sample showed good germination of Vicia faba as compared with non-treated MB dye-contaminated solution. In conclusion, the herein biosynthesized Ag-NPs demonstrated its feasibility of the purification of contaminated water from microbes and methylene blue dye and the probability of reusing purified water for agricultural purposes.

Nematicidal Potential of Green Silver Nanoparticles Synthesized Using Aqueous Root Extract of Glycyrrhiza glabra

Meloidogyne incognita (root-knot nematode) is a devastating soil-borne pathogen which can infect almost all cultivated plants around the globe, expediting huge pecuniary losses. The purpose of current study was to use the aqueous root extract of Glycyrrhiza glabra for synthesizing silver nanoparticles (GRAgNPs) and assess their nematicidal potential against M. incognita by in vitro methods, including hatching inhibition and mortality assays. The active uptake of FITC labeled GRAgNPs by the nematode and their effect on the expression of selected genes involved in oxidative stress and DNA damage repair were also studied. An HRTEM micrograph confirmed their spherical morphology with sizes ranging from 9.61 nm to 34.735 nm. Complete inhibition of egg-hatching was observed after 48 h of treatment with as low as 10.0 ppm of GRAgNPs. In addition, 100% mortality was recorded at the lowest dose of 6.0 ppm, after 12 h of treatment. The LC-50 for GRAgNPs was found to be 0.805 ± 0.177 ppm at p < 0.0001, R2 = 0.9930, and α = 0.05. The expression of targeted genes (skn-1, mev-1, sod-3, dhs-23, cyp-450, xpa, cpr-1, gst-n, and ugt) was significantly enhanced (1.09−2.79 folds), at 1.0 ppm (α = 0.05, 95% CI) GRAgNPs treatment. In conclusion, GRAgNPs performed efficaciously and considerably in contrast to chemical nematicide and commercial silver nanoparticles (CAgNPs) and might be used as a promising alternative as relatively lower concentration and short exposure time were enough to cause higher mortality and nanotoxicity in nematodes.

Nanobioremediation: A sustainable approach for the removal of toxic pollutants from the environment

In recent years, the proportion of organic and inorganic contaminants has increased rapidly due to growing human interference and represents a threat to ecosystems. The removal of these toxic pollutants from the environment is a difficult task. Physical, chemical and biological methods are implemented for the degradation of toxic pollutants from the environment. Among existing technologies, bioremediation in combination with nanotechnology is the most promising and cost-effective method for the removal of pollutants. Numerous studies have shown that exceptional characteristics of nanomaterials such as improved catalysis and adsorption properties as well as high reactivity have been subjects of great interest. There is an emerging trend of employing bacterial, fungal and algal cultures and their components, extracts or biomolecules as catalysts for the sustainable production of nanomaterials. They can serve as facilitators in the bioremediation of toxic compounds by immobilizing or inducing the synthesis of remediating microbial enzymes. Understanding the association between microorganisms, contaminants and nanoparticles (NPs) is of crucial importance. In this review, we focus on the removal of toxic pollutants using the cumulative effects of nanoparticles with microbial technology and their applications in different domains. Besides, we discuss how this novel nanobioremediation technique is significant and contributes towards sustainability.

Nanoarchitectured Cu based catalysts supported on alginate/glycyl leucine hybrid beads for tainted water treatment

Water pollution reached worrying point due to different dye pollutants which demands an instant solution. One of the best ways to manage water pollutants is their reduction and decolorization to less-toxic and useful compounds. However, reduction process requires an effective, stable, and recyclable catalyst to reduce such pollutants more effectively. Metal nanoparticles (M⁰) are highly effective catalysts but separation of nanoparticles after reaction is difficult and requires a high-speed centrifugation. If loaded on polymer-beads, they can be easily separated from the reaction-mixture. Hearin, alginate/glycyl leucine (AGL) hybrid-beads were prepared, and copper nanoparticles (Cu⁰) were grown on it by simple process. M⁰/AGL bead catalysts were tested toward reducing various toxic compounds. Among all developed composite-beads, the catalytic performance of Cu⁰/AGL was highest in terms of reduction kinetics. After initial screening for different pollutants, Cu⁰/AGL was much more effective for MO reduction, thus, all optimized different parameters i.e., catalyst dosage, stability, amount of reducing-agent and recyclability were experimentally determined. The Cu⁰/AGL showed high-rate constants (k_app) of 0.7566 and 2.9506 min^-1 depending on beads content. The reusability of the Cu⁰/AGL catalysts up to the 7^th cycle has been checked. With the use of AGL as support for the Cu nanoparticles, not only the catalytic activity was retained for longer times during reusability, but it helped in their easy separation.

Antimicrobial and dye degradation application of fungi-assisted silver nanoparticles and utilization of fungal retentate biomass for dye removal

The present study utilized Aspergillus spp. for the synthesis of silver nanoparticles (AgNPs); the developed AgNPs were categorized using analytical techniques, that is, ultraviolet-visible (UV-vis) spectrophotometer, Zeta-potential, dynamic light scattering (DLS), and transmission electron microscopy (TEM). A sharp peak of 463 nm highlighted the synthesis of AgNPs; further Zeta-potential of -16 mV indicates stability of synthesized AgNPs. The TEM micrograph showed spherical and hexagonal shapes of synthesized AgNPs of 6-25 nm. The photocatalytic activity of fungal-mediated AgNPs was evaluated for degradation of reactive yellow dye in the concentration range of 20-100 mg L^-1 . The results showed efficient degradation of dye using AgNPs in short span of time. For antibacterial activity, synthesized AgNPs, antibiotic, and AgNPs + antibiotic were tested. As per results, the zone of inhibition (ZOI) of AgNPs showed the values of 13 and 10 mm for Escherichia coli and Staphylococcus aureus, respectively. Further, the ZOI of penicillin highlighted the values of 18 and 17 mm for E. coli and S. aureus, respectively. When AgNPs and penicillin were used in combination, a clear synergistic effect was observed; the ZOI showed 0.49- and 0.36-fold increase in area against E. coli and S. aureus, respectively, in comparison with penicillin or AgNPs alone. Further, the leftover biomass (retentate biomass) was used to decolorize the reactive yellow dye at different initial concentration ranging from 20 to 100 mg L^-1 . It was observed that 1 g L^-1 retentate biomass (B_R ) can effectively remove 82%-100% dye at 20 and 100 mg L^-1 initial dye concentration. Results also indicated that with increase in initial reactive dye concentration from 20 to 100 mg L^-1 , the decolorization capacity of retentate biomass (B_R ) (at 0.2 g L^-1 ) decreased from 79.2% to 32.3%. However, the use of AgNPs synthesized leftover fungal biomass can be a good option for up taking the additional dyes/contaminants, and also as leftover biomass can be utilized effectively, it can prove to be an excellent approach for environment safety. As the literature studies did not mentioned the further use of retentate biomass, the present study provides an excellent approach for further research on this aspect. PRACTITIONER POINTS: Synthesis of AgNPs from Aspergillus spp. and characterized with the help of a U.V-vis spectrophotometer, a zeta potential, DLS and TEM. The developed AgNPs were used for antibacterial and dye degradation activity. The left over (retentate) fungal biomass was used further for additional dye degradation activity.

Synthetic preparations and atomic scale engineering of silver nanoparticles for biomedical applications

Owing to their peculiar oxidative effect, silver cations (Ag⁺) are well known for their antimicrobial properties and explored as therapeutic agents for biomedical applications. Size control with improved dispersion and stability are the key factors of Ag NPs (silver nanoparticles) to be used in biomedical applications. Silver based nano-materials are highly efficient due to their biological, chemical and physical properties in comparison with bulk silver. Atomic scale fabrication is achieved by rearranging the internal components of a material, in turn, influencing the mechanical, electrical, magnetic, thermal and chemical properties. For instance, size and shape have a strong impact on the optical, thermal and catalytic properties of Ag NPs. Such properties can be tuned by controlling the surface/volume ratio of Ag nanostructures with a small size (ideally <100 nm), in turn showing peculiar biological activity different from that of bulk silver. Silver nanomaterials such as nanoparticles, thin films and nanorods can be synthesized by various physical, chemical and biological methods whose most recent implementations will be described in this review. By controlling the structure-functionality relationship, silver based nano-materials have high potential for commercialization in biomedical applications. Antimicrobial, antifungal, antiviral, and anti-inflammatory Ag NPs can be applied in several fields such as pharmaceutics, sensors, coatings, cosmetics, wound healing, bio-labelling agents, antiviral drugs, and packaging.

Recent trends in microbial nanoparticle synthesis and potential application in environmental technology: a comprehensive review

Microbial technology comprising environment in various aspects of pollution monitoring, treatment of pollutants, and energy generation has been put forth by the researchers worldwide in an eco-friendly manner. During the past few decades, this revolution has pronounced microbial cells in green nanotechnology, extending the scope, efficiency, and investment capita at research institutes, industries, and global markets. In the present review, initially, the source for the microbial synthesis of nanoparticles will be discussed involving bacteria, fungi, actinomycetes, microalgae, and viruses. Further, the mechanism and bio-components of microbial cells such as enzymes, proteins, peptides, amino-acids, exopolysaccharides, and others involved in the bio-reduction of metal ions to corresponding metal nanoparticles will be emphasized. The biosynthesized nanoparticles physicochemical properties and bio-reduction methods' advantages compared with synthetic methods will be detailed. To understand the suitability of biosynthesized nanoparticles in a wide range of applications, an overview of its blend of medicine, agriculture, and electronics will be discussed. This will be geared up with its applications specific to environmental aspects such as bioremediation, wastewater treatment, green-energy production, and pollution monitoring. Towards the end of the review, nano-waste management and limitations, i.e., void gaps that tend to impede the application of biosynthesized nanoparticles and microbial-based nanoparticles' prospects, will be deliberated. Thus, the review would claim to be worthy of unwrapping microorganisms sustainability in the emerging field of green nanotechnology.

Biosynthesis of Silver Nanoparticles Mediated by Entomopathogenic Fungi: Antimicrobial Resistance, Nanopesticides, and Toxicity

Silver nanoparticles are widely used in the biomedical and agri-food fields due to their versatility. The use of biological methods for the synthesis of silver nanoparticles has increased considerably due to their feasibility and high biocompatibility. In general, microorganisms have been widely explored for the production of silver nanoparticles for several applications. The objective of this work was to evaluate the use of entomopathogenic fungi for the biological synthesis of silver nanoparticles, in comparison to the use of other filamentous fungi, and the possibility of using these nanoparticles as antimicrobial agents and for the control of insect pests. In addition, the in vitro methods commonly used to assess the toxicity of these materials are discussed. Several species of filamentous fungi are known to have the ability to form silver nanoparticles, but few studies have been conducted on the potential of entomopathogenic fungi to produce these materials. The investigation of the toxicity of silver nanoparticles is usually carried out in vitro through cytotoxicity/genotoxicity analyses, using well-established methodologies, such as MTT and comet assays, respectively. The use of silver nanoparticles obtained through entomopathogenic fungi against insects is mainly focused on mosquitoes that transmit diseases to humans, with satisfactory results regarding mortality estimates. Entomopathogenic fungi can be employed in the synthesis of silver nanoparticles for potential use in insect control, but there is a need to expand studies on toxicity so to enable their use also in insect control in agriculture.

Mechanistic Aspects of Microbe-Mediated Nanoparticle Synthesis

In recent times, nanoparticles (NPs) have found increasing interest owing to their size, large surface areas, distinctive structures, and unique properties, making them suitable for various industrial and biomedical applications. Biogenic synthesis of NPs using microbes is a recent trend and a greener approach than physical and chemical methods of synthesis, which demand higher costs, greater energy consumption, and complex reaction conditions and ensue hazardous environmental impact. Several microorganisms are known to trap metals in situ and convert them into elemental NPs forms. They are found to accumulate inside and outside of the cell as well as in the periplasmic space. Despite the toxicity of NPs, the driving factor for the production of NPs inside microorganisms remains unelucidated. Several reports suggest that nanotization is a way of stress response and biodefense mechanism for the microbe, which involves metal excretion/accumulation across membranes, enzymatic action, efflux pump systems, binding at peptides, and precipitation. Moreover, genes also play an important role for microbial nanoparticle biosynthesis. The resistance of microbial cells to metal ions during inward and outward transportation leads to precipitation. Accordingly, it becomes pertinent to understand the interaction of the metal ions with proteins, DNA, organelles, membranes, and their subsequent cellular uptake. The elucidation of the mechanism also allows us to control the shape, size, and monodispersity of the NPs to develop large-scale production according to the required application. This article reviews different means in microbial synthesis of NPs focusing on understanding the cellular, biochemical, and molecular mechanisms of nanotization of metals.