Removal of 2,4-dichlorophenoxyacetic acid by the boron-nitrogen co-doped carbon nanotubes: Insights into peroxymonosulfate adsorption and activation

Roles of BOCu sites and graphite nitrogen on persulfate non-radical activation for tetracycline degradation

The activation of peroxymonosulfate (PMS) by carbon-based catalysts is deemed to be a promising method for the degradation of refractory organic contaminants in wastewater. Herein, a Cu-doping strategy in B and N co-doped carbon nanotubes with highly dispersed BOCu sites and graphite nitrogen were successfully synthesized for activating PMS to degradate tetracycline. The best removal rate of tetracycline within 60 min (97.63 %) was obtained by the 1.5 % Cu-BNC and the degradation rate was increased by 17.9 times. The enhanced catalyst activity was attributed to the promoting the cycle of the Cu(I)/Cu(II) redox pair by the formed BOCu sites, and the accelerating the electron transfer process by the adsorption of graphitic N for PMS. The non-free radical pathway including 1O2 and electron transfer played a dominant role in the 1.5 % Cu-BNC/PMS system. The degradation intermediates of TC were identified and three possible degradation pathways were proposed. Further toxicity analysis of the intermediates showed that the 1.5 % Cu-BNC/PMS system had a significant effect on weakening and reducing the biological toxicity and mutagenicity of TC. Moreover, it presented an excellent degradation performance in raw natural water. In general, the proposed regulation of carbon-based catalysts via the coordination-driven effect provides ideas for efficient wastewater treatment.

Synthesis, characterization and adsorption optimization of bimetallic La-Zn metal organic framework for removal of 2,4-dichlorophenylacetic acid

To eliminate the hazardous pesticide 2,4-dichlorophenylacetic acid (2,4-D) through aqueous solutions, stacked nanorods known as hetero bimetallic organic frameworks (MOFs) of 2-methyl imidazole based on lanthanum and zinc are created. The research's convincing discoveries displayed that La/Zn-MOF is an actual adsorbent for the removal of 2,4-D through aqueous solutions. The La/Zn-MOF was investigated using a variability of techniques, with scanning electron microscope (SEM), powered X-ray diffraction (PXRD), and Brunauer-Emmett-Teller (BET) investigation. La/Zn-MOF has a significant pore capacity of 1.04 cm³/g and a comparatively large surface area of 897.69 m2/g. Our findings, which are quite intriguing, demonstrate that adsorption behavior is pointedly wedged by variations in pH. A pH 6 dose of 0.02 g was shown to be the optimal setting for the greatest capacity for adsorption. Because adsorption is an endothermic process, temperature variations affect its capability. The adsorption method was fit both isothermally and kinetically using the Langmuir isotherm classical. It was created that the entire process made use of a chemisorption mechanism. Solution pH, temperature, adsorbent dosage, and time were all improved using the Box-Behnken design (BBD) and Response Surface Methodology (RSM). We were able to accurately calculate the values of ΔHo, ΔSo, and ΔGo for 2,4-D by following the guidelines. These results demonstrated the spontaneous and endothermic character of the adsorption procedure employing La/Zn-MOF as an adsorbent. Adsorption-desorption cycles can be carried out up to five times. With the synthesized La/Zn-MOF adsorbent due to its exceptional reusability. Many processes, such π-π interaction, pore filling, H-bonding, or electrostatic contact, were postulated to explain the connection between La/Zn-MOF and 2,4-D after extra research to appreciate well the link was conducted. This is the first study to demonstrate the effectiveness of utilizing La/Zn-MOF as an adsorbent to eliminate 2,4-D from wastewater models. The results display that a pH of 6 is required to achieve the maximal 2,4-D adsorption capability on La/Zn-MOF, which is 307.5 mg/g.

Preparation of Cobalt-Nitrogen Co-Doped Carbon Nanotubes for Activated Peroxymonosulfate Degradation of Carbamazepine

Cobalt-nitrogen co-doped carbon nanotubes (Co3@NCNT-800) were synthesized via a facile and economical approach to investigate the efficient degradation of organic pollutants in aqueous environments. This material demonstrated high catalytic efficiency in the degradation of carbamazepine (CBZ) in the presence of peroxymonosulfate (PMS). The experimental data revealed that at a neutral pH of 7 and an initial CBZ concentration of 20 mg/L, the application of Co3@NCNT-800 at 0.2 g/L facilitated a degradation rate of 64.7% within 60 min. Mechanistic investigations indicated that the presence of pyridinic nitrogen and cobalt species enhanced the generation of reactive oxygen species. Radical scavenging assays and electron spin resonance spectroscopy confirmed that radical and nonradical pathways contributed to CBZ degradation, with the nonradical mechanism being predominant. This research presents the development of a novel PMS catalyst, synthesized through an efficient and stable method, which provides a cost-effective solution for the remediation of organic contaminants in water.

Generation and identification of 1O2 in catalysts/peroxymonosulfate systems for water purification

Catalysts for peroxymonosulfate (PMS) activation are appealing in the purification of organic wastewater. Singlet oxygen (1O2) is widely recognized as a crucial reactive species for degrading organic contaminants in catalysts/PMS systems due to its adamant resistance to inorganic anions, high selectivity, and broad pH applicability. With the rapid growth of studies on 1O2 in catalysts/PMS systems, it becomes necessary to provide a comprehensive review of its current state. This review highlights recent advancements concerning 1O2 in catalysts/PMS systems, with a primary focus on generation pathways and identification methods. The generation pathways of 1O2 are summarized based on whether (distinguished by the geometric structures of metal species) or not (distinguished by the active sites) the metal element is included in the catalysts. Furthermore, this review thoroughly discusses the influence of metal valence states and metal species with different geometric structures on 1O2 generation. Various potential strategies are explored to regulate the generation of 1O2 from the perspective of catalyst design. Identification methods of 1O2 primarily include electron paramagnetic resonance (EPR), quenching experiments, reaction in D2O solution, and chemical probe tests in catalysts/PMS systems. The principles and applications of these methods are presented comprehensively along with their applicability, possible disagreements, and corresponding solutions. Besides, an identifying procedure on the combination of main identification methods is provided to evaluate the role of 1O2 in catalysts/PMS systems. Lastly, several perspectives for further studies are proposed to facilitate developments of 1O2 in catalysts/PMS systems.

Remediation of water tainted with noxious aspirin and fluoride ion using UiO-66-NH2 loaded peanut shell

One green adsorbent, UiO-66-NH2 modified peanut shell (c-PS-MOF), was prepared in a green synthetic route for improving the capture level of aspirin (ASP) and fluoride ion (F-). The adsorption properties of c-PS-MOF were evaluated by batch experiments and its physicochemical properties were explored by various characterization methods. The results showed that c-PS-MOF exhibited a wide range of pH applications (ASP: 2-10; F-: 3-12) and high salt resistance in the capturing processes of ASP and F-. The unit adsorption capacity of c-PS-MOF was as high as 84.7 mg·g-1 for ASP as pH = 3 and 11.2 mg·g-1 for F- under pH = 6 at 303 K from Langmuir model, respectively. When the solid-liquid ratio was 2 g·L-1, the content of ASP (C0 = 100 mg·L-1) and F- (C0 = 20 mg·L-1) in solution can be reduced to 0.48 mg·L-1 and 1.05 mg·L-1 separately. The recycling of c-PS-MOF can be realized with 5 mmol·L-1 NaOH as eluent. Analysis of simulated water samples showed that c-PS-MOF could be used to remove ASP and F- from actual water. The c-PS-MOF is promising to bind ASP and F- from rivers, lakes, etc.

Adsorption of 2,4-dichlorophenoxyacetic acid and glyphosate from water by Fe3O4-UiO-66-NH2 obtained in a simple green way

In this study, a green adsorbent (Fe₃O₄-UiO-66-NH₂) with the ability of addressing the issues of separation and recovery of UiO-66-NH₂ is obtained using a simple co-precipitation method under environmentally benign conditions. Various characterization techniques are utilized for evaluating the properties of the developed adsorbent. The capability of Fe₃O₄-UiO-66-NH₂ towards 2,4-dichlorophenoxyacetic acid (2,4-D) and glyphosate (GP) from solution is explored. The results revealed that the magnetization process did not destroy the crystal structure of UiO-66-NH₂, which ensured that Fe₃O₄-UiO-66-NH₂ had good adsorption performance for 2,4-D and GP. The adsorption processes showed a wide pH application range, high salt tolerance, and regeneration performance as well as an excellent adsorption rate. Results from thermodynamic study showed that both processes were spontaneous and endothermic. The unit uptake ability of Fe₃O₄-UiO-66-NH₂ for 2,4-D and GP reached up to 249 mg·g^-1 and 183 mg·g^-1 from Langmuir model at 303 K, respectively. When solid-liquid ratio was 2 g·L^-1, Fe₃O₄-UiO-66-NH₂ can reduce the content of 2,4-D or GP with the initial density of 100 mg·L^-1 below the drinking water requirement limit. In addition, the reusability efficiency of Fe₃O₄-UiO-66-NH₂ towards 2,4-D and GP was found to be 86% and 80% using 5 mmol·L^-1 NaOH as eluent. Analysis of simulated water samples indicated that Fe₃O₄-UiO-66-NH₂ could achieve the single or simultaneous removal of 2,4-D and GP from wastewater. Summarily, Fe₃O₄-UiO-66-NH₂ as a green adsorbent can serve as an alternative for removing 2,4-D and GP from water body.

Nitrogen and sulfur dual doped porous carbon as metal-free catalyst for oxidative degradation of 4-nitrophenol by persulfate activation

The replacement of metals in catalytic processes is highly demanded to improve sustainability and economic growth. Poor stability and metal leaching are the main drawbacks of metal-based catalytic reactions. This work represented the use of nitrogen and sulfur-co-doped mesoporous carbon material ((N, S)-MPC) as a metal-free catalyst for the degradation of 4-nitrophenol (4-NP) as a priority pollutant announced by the Environmental Protection Agency through the persulfate-based advanced oxidation process. A low amount of (N, S)-MPC catalyst (0.3 g/L) exhibited superior performance for the degradation of 4-NP within 3 h at room temperature and unadjusted pH. The COD removal was calculated to be 76% using (N, S)-MPC catalyst. Interestingly, the degradations kinetics of 4-NP followed the zero-order kinetics with the rate constant of 0.505 min^-1. The radical quenching experiment was accomplished to investigate the activation pathway of degradation. A real sample from an oil and gas company was treated with the (N, S)-MPC catalyst, which showed excellent total decontamination of 61%. The recyclability and stability of the catalyst have been evaluated for three runs. Owing to the obvious benefits such as high efficiency, metal-free nature, and recyclability, the presented catalyst can improve pollutant removal from aqueous media and practical environmental remediation.

Enhancement of peroxymonosulfate activation for 2,4-dichlorophenoxyacetic acid removal by MoSe2 induced Fe redox cycles

The limited regeneration of Fe2+ in the Fe-catalyzed advanced oxidation processes (AOPs) constrained its application for the removal of organic pollutants. Herein, MoSe2 was introduced to promote the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) in the Fe2+/PMS system. Compared with Fe2+/PMS processes, the 2,4-D degradation efficiency and PMS decomposition rate respectively increased by 73.8% and 84.2% in the MoSe2/Fe2+/PMS system. DFT simulation results suggested that Se atoms acted smoothly as the bridge supporting the charge transfer from Mo to adjacent Fe atoms, which led to the reduction of Fe3+. The rapid regeneration of Fe2+ boosted the activation of PMS and the degradation of pollutants. Additionally, the electron paramagnetic resonance (EPR) and quenching experiments results indicated that SO4∙-, ∙OH, and 1O2 accounted for 2,4-D degradation, and SO4∙- and 1O2 predominated the reaction. The Mo based co-catalysts showed better co-catalytic effect than the W counterparts, and the moderate adsorption for PMS and lower electron transfer electron transfer resistance accounted for the more excellent co-catalytic performance of MoSe2 than that of WSe2. In addition, the degradation efficiency of 2,4-D was up to 95.5% after five cycles of MoSe2 in the co-catalytic system. The coexistent humic acid (HA) and Cl- showed ignorant negative effect on the degradation, while HCO3- would depress the oxidation reaction. The acidic etching wastewater can be applied as the Fe ions source in this co-catalytic process to remove 2,4-D effectively.

Adsorption of 2,4-dichlorophenoxyacetic acid by UiO-66-NH2 obtained in a green way

In this study, a zirconium elemental organic framework (UiO-66-NH₂) was prepared by a green synthesis method and showed a good adsorption performance for removing 2,4-dichlorophenoxyacetic acid (2,4-D) from water. UiO-66-NH₂ was analyzed by a variety of characterization methods and the adsorption properties of 2,4-D on UiO-66-NH₂ were investigated by static adsorption experiments. The results showed that the adsorption of 2,4-D had a wide pH range (2-10) and good salt tolerance with the adsorption equilibrium time about 2 h. The maximum adsorption capacity from Langmuir was up to 652 mg g^-1 at 303 K. The isotherms can be described by Langmuir model and the adsorption kinetics was consistent with pseudo-second-order kinetic model and Elovich model. The regeneration efficiency was still 95% after 5 cycles with 0.01 mol L^-1 NaOH as desorption solution. The feasibility of practical application of UiO-66-NH₂ was explored by simulating actual wastewater at different pH. UiO-66-NH₂ is promising to remove 2,4-D from water.

Mechanisms and influencing factors for electron transfer complex in metal-biochar nanocomposites activated peroxydisulfate

The mechanisms and influencing factors for electron transfer complex need to be further studied by comparing radical and nonradical pathways. Herein, metal-biochar (BC) nanocomposites including CuO/BC, Fe₃O₄/BC and ZnO/BC were prepared to activate peroxydisulfate (PDS) for bisphenol A (BPA) degradation. The existence of electron transfer complex in CuO/BC-PDS system were directly demonstrated. Whereas radical pathway was dominant in Fe₃O₄/BC- and ZnO/BC-PDS systems for BPA degradation. There was a relationship between PDS adsorption and catalytic reaction. The rate-limiting step for BPA degradation in nonradical pathway was PDS adsorption, but in radical pathway was BPA degradation. Interestingly, among metal-BC, CuO/BC had the most effective performance in transformation of adsorbed PDS to electron transfer complex via out-sphere complexation. After pretreatment by PDS solutions, the separated CuO/BC achieved an efficiency of 60% in ensuing BPA degradation without re-addition of PDS. In addition, the activity of electron transfer complex in BPA degradation (k_obs > 0.0480 min^-1) was not affected by water matrix (e.g., Cl^-, HCO₃^-, natural organic matter (NOM) and actual water bodies), but affected by solution property (i.e., dissolved oxygen and conductivity) and oxidant species. Moreover, in BPA degradation process, nonradical pathway exhibited lower ecotoxicity instead of radical pathway.

Carbon nanotube-based materials for persulfate activation to degrade organic contaminants: Properties, mechanisms and modification insights

Removal of harmful organic matters from environment has great environmental significance. Carbon nanotube (CNT) materials and their composites have been demonstrated to possess excellent catalytic activity towards persulfate (PS) activation for the degradation of organic contaminants. Herein, detailed information concerning the function, modification methods and relevant mechanisms of CNT in persulfate-based advanced oxidation processes (PS-AOPs) for organic pollutant elimination has been reviewed. The activation mechanism of PS by CNT might include radical and nonradical pathways and their synergistic effects. The common strategies to improve the stability and catalytic capability of CNT-based materials have also been put forward. Furthermore, their practical application potential compared with other catalysts has been described. Finally, the challenges faced by CNT in practical application are clearly highlighted. This review should be of value in promoting the research of PS activation by CNT-based materials for degradation of organic pollutants and the corresponding practical applications.

Multi-heteroatom-doped carbocatalyst as peroxymonosulfate and peroxydisulfate activator for water purification: A critical review

Catalytic activation of peroxymonosulfate (PMS) and peroxydisulfate (PDS) (or collectively known as persulfate, PS) using carbocatalyst is increasingly gaining attention as a promising technology for sustainable recalcitrant pollutant removal in water. Single heteroatom doping using either N, S, B or P is widely used to enhance the performance of the carbocatalyst for PS activation. However, the performance enhancement from single heteroatom doping is limited by the type of heteroatom used. To further enhance the performance of the carbocatalyst beyond the limit of single heteroatom doping, multi-heteroatom doping can be conducted. This review aims to provide a state-of-the-art overview on the development of multi-heteroatom-doped carbocatalyst for PS activation. The potential synergistic and antagonistic interactions of various heteroatoms including N and B, N and S, N and P, and N and halogen for PS activation are evaluated. Thereafter, the preparation strategies to develop multi-heteroatom-doped carbocatalyst including one-step and multi-step preparation approaches along with the characterization techniques are discussed. Evidence and summary of the performance of multi-heteroatom-doped carbocatalyst for various recalcitrant pollutants removal via PS activation are also provided. Finally, the prospects of employing multi-heteroatom-doped carbocatalyst including the need to study the correlation between different heteroatom combination, surface moiety type, and amount of dopant with the PS activation mechanism, identifying the best heteroatom combination, improving the durability of the carbocatalyst, evaluating the feasibility for full-scale application, developing low-cost multi-heteroatom-doped carbocatalyst, and assessing the environmental impact are also briefly discussed.

Degradation of organic contaminants in marine sediments by peroxymonosulfate over LaFeO3 nanoparticles supported on water caltrop shell-derived biochar and the associated microbial community responses

Sediment is an important final repository of persistent organic pollutants such as polycyclic aromatic hydrocarbons (PAHs). Herein, a novel catalyst of LaFeO₃ nanoparticles supported on biochar was synthesized from water caltrop shell by chemical precipitation. The composite (LFBC) was used as peroxymonosulfate (PMS) activator to oxidize PAHs in real marine sediments. Systematic surface characterization confirmed the immobilization of well crystalline nano LaFeO₃ particles onto the biochar surface. Under optimal conditions, i.e., [PMS] = 3 × 10^-4 M, [LFBC] = 0.75 g/L, pH 6.0, and seawater, the total PAH degradation efficiency was 90%, while that of 2-, 3-, 4-, 5-, and 6-ring PAHs was 52%, 61%, 66%, 56%, and 29%, respectively, in 24 h. The Langmuir-Hinshelwood equation better predicted the PAHs degradation kinetics over LFBC by PMS. Interactions between surface oxygen species at LaFeO₃ defective sites and the graphitized biochar network facilitated the PAHs degradation. Furthermore, changes in the bacterial community during the LFBC/PMS treatment were highlighted to assess the sustainable development of the sediment ecosystem. The LFBC/PMS process enhanced the biological richness and diversity of sediment eco-systems. The major phylum was Proteobacteria initially, while Hyphomonas was the genera after LFBC/PMS treatment of the sediment.

Fabrication of Co3O4-Bi2O3-Ti catalytic membrane for efficient degradation of organic pollutants in water by peroxymonosulfate activation

In this study, a functionalized Co₃O₄-Bi₂O₃-Ti catalytic membrane (CBO-Ti-M) was prepared and applied for removing organic pollutants via activating peroxymonosulfate (PMS) in the dead-end filtration mode. Characterizations including scanning electron microcopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed that the Co₃O₄-Bi₂O₃ catalyst was successfully supported on the Ti membrane. The CBO-Ti-M /PMS system could efficiently remove various organic pollutants such as sulfamethoxazole, methyl orange, bisphenol A and methylene blue, achieving removal efficiencies of 98.0%-99.5%. The effects of PMS concentration, flow rate and solution environment on degradation efficiency were investigated in detail. Furthermore, quenching experiments, electron spin resonance (ESR) and in-situ open circuit potential (OCP) tests collectively demonstrated that singlet oxygen as well as the non-radical electron transfer pathway mainly contributed in the reaction mechanism. The synergistic effect of Co and Bi was illustrated according to XPS results, and the possible degradation pathway of MB was proposed based on LC-MS analysis. Reusability test showed that pollutant removal efficiency with the CBO-Ti-M /PMS system remained stable in four runs and limited metal leaching was observed.