Sustainable ammonia resource recovery from landfill leachate by solar-driven modified direct contact membrane distillation

Ammonia recovery via direct contact membrane distillation: Modeling and performance optimization

Ammonia recovery from wastewater has positive environmental benefits, avoiding eutrophication and reducing production energy consumption, which is one of the most effective ways to manage nutrients in wastewater. Specifically, ammonia recovery by membrane distillation has been gradually adopted due to its excellent separation properties for volatile substances. However, the global optimization of direct contact membrane distillation (DCMD) operating parameters to maximize ammonia recovery efficiency (ARE) has not been attempted. In this work, three key operating factors affecting ammonia recovery, i.e., feed ammonia concentration, feed pH, and DCMD running time, were identified from eight factors, by a two-level Plackett-Burman Design (PBD). Subsequently, Box-Behnken design (BBD) under the response surface methodology (RSM) was used to model and optimize the significant operating parameters affecting the recovery of ammonia though DCMD identified by PBD and statistically verified by analysis of variance (ANOVA). Results showed that the model had a high coefficient of determination value (R2 = 0.99), and the interaction between NH4Cl concentration and feed pH had a significant effect on ARE. The optimal operating parameters of DCMD as follows: NH4Cl concentration of 0.46 g/L, feed pH of 10.6, DCMD running time of 11.3 h, and the maximum value of ARE was 98.46%. Under the optimized conditions, ARE reached up to 98.72%, which matched the predicted value and verified the validity and reliability of the model for the optimization of ammonia recovery by DCMD process.

Enhanced landfill leachate treatment performance by adsorption-assisted membrane distillation

Membrane fouling and high-strength membrane concentrate production are two limitations of membrane distillation (MD) for landfill leachate treatment. In this study, activated carbon- and biochar-based adsorption processes were integrated into a conventional MD system to overcome these limitations. The organic matter fractionations of the leachate were thoroughly investigated during the treatment. Membrane-reversible and irreversible foulants differed remarkably from the inlet leachate in the non-assisted MD system. Specifically, reversible foulants were characterized by a high abundance of humic-like fluorescent components, high-molecular-weight humic-size constituents, peptides, and unsaturated compounds. In contrast, irreversible foulants were enriched with fulvic-like fluorescent components, low-molecular-weight neutrals, unsaturated compounds, and polyphenols. The adsorption-based pre-treatment effectively removed foulant precursors from landfill leachate, with a relatively higher (20%) adsorption performance for specific biochar used in this study than for activated carbon. Compared with the non-assisted MD system, the biochar-assisted MD system showed improved performance, achieving 40% overall membrane flux recovery, 42% higher filtration fluxes, and 53% lower concentrate production. In addition, a 15% higher removal of irreversible foulants was observed as compared to the reversible foulants, which can potentially increase the membrane lifespan. This study demonstrates the effectiveness of an adsorption-assisted MD system supported by increased filtration, membrane fouling alleviation, and low-strength leachate concentrate generation.

Evaluation of volatile fatty acids and ammonia recovery approach from landfill leachate using pilot-scale mechanical vapor recompression

Treatment of landfill leachate is still a current problem due to the high treatment costs in addition to the difficulty of meeting the discharge criteria. However, there is a more important issue that should be underlined; it is also valuable compounds that leachate contains. Conventional methods used for treatment of leachate such as membrane filtration, advanced oxidation processes, biological processes and their combinations have largely focused on treatment. However, the recovery of ammonia and volatile organic acids (VFA) in leachate is a promising approach both to overcome high treatment costs and to sustainably manage leachate. In this study, leachate treatment potential was investigated by mechanical vapor recompression (MVR) process, which offers an operational opportunity to recover high value-added products from leachate while providing an effective treatment for wastewater. Optimum operating conditions for the pilot-scale MVR process have been determined by laboratory-scale studies. VFAs were recovered as organic acid salts from the pilot-scale MVR distillate, while ammonia recovery was accomplished as ammonium sulfate from a highly contaminated concentrate stream. VFA and ammonia recovery rates were 89% and 99%, respectively. The treatment cost of leachate with MVR process was calculated according to the data obtained in pilot scale MVR studies considering the operating cost, chemical cost and economical contribution of value-added products. The results showed that the integrated MVR-crystallization process, all treatment costs are covered, with a net gain of 3.8 USD/m3. Consequently, MVR integrated crystallization process offers an economical and sustainable solution for the treatment of leachate by recovering valuable products.

Nutrient recovery from municipal solid waste leachate in the scope of circular economy: Recent developments and future perspectives

Holistically considering the current situation of the commercial synthetic fertilizer (CSF) market, recent global developments, and future projection studies, dependency on CSFs in agricultural production born significant risks, especially to the food security of foreign-dependent countries. The foreign dependency of countries in terms of CSFs can be reduced by the concepts such as the circular economy and resource recovery. Recently, waste streams are considered as a source in order to produce recovery-based fertilizers (RBF). RBFs produced from different waste streams can be substituted with CSFs as input for agricultural applications. Municipal solid waste leachate (MSWL) is one of the waste streams that have a high potential for RBF production. Distribution of the published papers over the years shows that this potential was noticed by more researchers in the millennium. MSWL contains a remarkable amount of nitrogen and phosphorus which are the main nutrients required for agricultural production. These nutrients can be recovered with many different methods such as microalgae cultivation, chemical precipitation, ammonia stripping, membrane separation, etc. MSWL can be generated within the different phases of municipal solid waste (MSW) management. Although it is mainly composed of landfill leachate (LL), composting plant leachate (CPL), incineration plant leachate (IPL), and transfer station leachate (TSL) should be considered as potential sources to produce RBF. This study compiles studies conducted on MSWL from the perspective of nitrogen and phosphorus recovery. Moreover, recent developments and limitations of the subject were extensively discussed and future perspectives were introduced by considering the entire MSW management. Investigated studies in this review showed that the potential of MSWL to produce RBF is significant. The outcomes of this paper will serve the countries for ensuring their food security by implementing the resource recovery concept to produce RBF. Thus, the risks born with the recent global developments could be overcome in this way besides the positive environmental outcomes of resource recovery.

Insights into sustainable resource and energy recovery from leachate towards emission mitigation for environmental management: A critical approach

The exponential generation of municipal solid waste (MSW) and landfill disposal without any treatment has increased the continuous generation of landfill leachate. Improper MSW and leachate management are contributing to environmental degradation and water and soil pollution, which must be treated. Numerous works have been conducted on leachate treatments for energy and resource recovery. This review presents a comprehensive study of leachate management in which different treatment methods are discussed to analyze the suitability of processes that can be employed to treat leachate efficiently. Further, the characteristics of leachate are examined as properties of leachate may be varied depending upon the region. Still, several challenges related to leachate management and its treatments are discussed in this study. An integrated system could be a better option for treating leachate because it contains large amounts of organic and inorganic compounds. Proper leachate management would help to recover energy and value-added products (metals).

Simultaneous ammonium and water recovery from landfill leachate using an integrated two-stage membrane distillation

Resources recovery from landfill leachate (LFL) has been attracting growing attention instead of merely purifying the wastewater. An integrated two-stage membrane distillation (ITMD) was proposed to simultaneously purify LFL and recover ammonia in this study. The results showed that organics could be always effectively rejected by the ITMD regardless of varying feed pH, with COD removal higher than 99%. With feed pH increased from 8.64 to 12, the ammonia migration (50-100%) and capture (36-75%) in LFL were considerably enhanced, boosting the separated ammonia enrichment to 1.3-1.7 times due to the improved ammonium diffusion. However, the corresponding membrane flux of the first MD stage decreased from 13.7 to 10.5 L/m²·h. Elevating feed pH caused the deprotonation of NOM and its binding with inorganic ions, constituting a complex fouling layer on the membrane surface in the first MD stage. In contrast, the membrane permeability and fouling of the second MD were not affected by feed pH adjustment because only volatiles passed through the first MD. More importantly, it was estimated that ITMD could obtain high-quality water and recover high-purity ammonium from LFL with relatively low ammonium concentration at an input cost of $ 2-3/m³, which was very competitive with existing techniques. These results demonstrated that the ITMD can be a valuable candidate strategy for simultaneous water purification and nutrient recovery from landfill leachate.

Tricks and tracks in waste management with a special focus on municipal landfill leachate: Leads and obstacles

Landfilling is the most widely used disposal method for municipal solid waste around the world. The main disadvantage of this strategy is formation of leachate, among other aspects. Landfill leachate contains highly toxic and bio-refractory substances that are detrimental to the environment and human health. Hence, the risk(s) of discharging potentially harmful landfill leachate into the environment need to be assessed and measured in order to make effective choices about landfill leachate management and treatment. In view of this, the present review aims to investigate (a) how landfill leachate is perceived as an emerging concern, and (b) the stakeholders' mid- to long-term policy priorities for implementing technological and integrative solutions to reduce the harmful effects of landfill leachate. Because traditional methods alone have been reported ineffective, and in response to emerging contaminants and stringent regulations, new effective and integrated leachate treatments have been developed. This study gives a forward-thinking of the accomplishments and challenges in landfill leachate treatment during the last decade. It also provides a comprehensive compilation of the formation and characterization of landfill leachate, the geo-environmental challenges that it raises, as well as the resource recovery and industrial linkage associated with it in order to provide an insight into its sustainable management.

A Comprehensive Review on Wastewater Nitrogen Removal and Its Recovery Processes

Discharging large amounts of domestic and industrial wastewater drastically increases the reactive nitrogen content in aquatic ecosystems, which causes severe ecological stress and biodiversity loss. This paper reviews three common types of denitrification processes, including physical, chemical, and biological processes, and mainly focuses on the membrane technology for nitrogen recovery. The applicable conditions and effects of various treatment methods, as well as the advantages, disadvantages, and influencing factors of membrane technologies, are summarized. Finally, it is proposed that developing effective combinations of different treatment methods and researching new processes with high efficiency, economy, and energy savings, such as microbial fuel cells and anaerobic osmotic membrane bioreactors, are the research and development directions of wastewater treatment processes.

A review on membrane concentrate management from landfill leachate treatment plants: The relevance of resource recovery to close the leachate treatment loop

Membrane filtration processes have been used to treat landfill leachate. On the other hand, closing the leachate treatment loop and finding a final destination for landfill leachate membrane concentrate (LLMC) - residual stream of membrane systems - is challenging for landfill operators. The re-introduction of LLMC into the landfill is typical; however, this approach is critical as concentrate pollutants may accumulate in the leachate treatment facility. From that, leachate concentrate management based on resource recovery rather than conventional treatment and disposal is recommended. This work comprehensively reviews the state-of-the-art of current research on LLMC management from leachate treatment plants towards a resource recovery approach. A general recovery train based on the main LLMC characteristics for implementing the best recovery scheme is presented in this context. LLMCs could be handled by producing clean water and add-value materials. This paper offers critical insights into LLMC management and highlights future research trends.

Systematic literature review of solar-powered landfill leachate sanitation: Challenges and research directions over the past decade

Researchers have documented the negative effects of refractory chemicals and emergent pollutants in landfill leachate (LL) that cannot be degraded using conventional methods. The propagation, invasion, and deleterious effects of several LL hazards affect aquatic species, the environment, and food outlets, causing significant safety issues. These include cancer risks, chronic exposure, and reproductive consequences. Alternatively, solar energy is a sustainable solution for treating landfill leachate to benefit humans and the environment. In this work, a thorough bibliometric and systematic analysis of studies that employed solar energy for landfill leachate remediation over the past decade was conducted in order to determine trends, and future research areas. In addition to the energy demand, the economic aspect and the advantages of using solar power to treat landfill leachate were discussed. Additionally, the study gives specific suggestions for future research purposes and important problems. The reviewed literature revealed that combining solar-based physical-chemical and biological processes has proven to be the most efficient method for landfill leachate degradation. It also appears from the bibliometric study that more collaboration and contribution are needed to develop solar-based landfill leachate treatment. This study concludes that solar-powered landfill leachate remediation techniques would considerably increase the effectiveness of treated leachate reutilization, advancing the cause of environmental sustainability.

Membrane Technologies for Nitrogen Recovery from Waste Streams: Scientometrics and Technical Analysis

The concerns regarding the reactive nitrogen levels exceeding the planetary limits are well documented in the literature. A large portion of anthropogenic nitrogen ends in wastewater. Nitrogen removal in typical wastewater treatment processes consumes a considerable amount of energy. Nitrogen recovery can help in saving energy and meeting the regulatory discharge limits. This has motivated researchers and industry professionals alike to devise effective nitrogen recovery systems. Membrane technologies form a fundamental part of these systems. This work presents a thorough overview of the subject using scientometric analysis and presents an evaluation of membrane technologies guided by literature findings. The focus of nitrogen recovery research has shifted over time from nutrient concentration to the production of marketable products using improved membrane materials and designs. A practical approach for selecting hybrid systems based on the recovery goals has been proposed. A comparison between membrane technologies in terms of energy requirements, recovery efficiency, and process scale showed that gas permeable membrane (GPM) and its combination with other technologies are the most promising recovery techniques and they merit further industry attention and investment. Recommendations for potential future search trends based on industry and end users' needs have also been proposed.

Enhancing the Ammonia Selectivity by Using Nanofiber PVDF Composite Membranes Fabricated with Functionalized Carbon Nanotubes

Conventional hydrophobic membrane-based membrane distillation (MD) has been applied for ammonia recovery from an anaerobic digestion (AD) effluent. However, the typical hydrophobic membranes do not have selectivity for ammonia and water vapor, which results in high energy consumption from the water evaporation. To enhance the selectivity during the ammonia recovery process, the functionalized carbon nanotubes (CNTs)/polyvinylidene fluoride (PVDF) nanofiber membranes were fabricated by electrospinning, and the effects of different CNTs and their contents on the performance of nanofiber membranes were investigated. The results indicate that CNTs can be successfully incorporated into nanofibers by electrospinning. The contact angles of the composite membrane are all higher than those of commercial membrane, and the highest value 138° can be obtained. Most importantly, under the condition of no pH adjustment, the ammonia nitrogen transfer coefficient reaches the maximum value of 3.41 × 10^-6 m/s, which is about twice higher than that of commercial membranes. The ammonia separation factor of the carboxylated CNT (C-CNT) composite membrane is higher than that of the hydroxylated CNT(H-CNT) composite membrane. Compared with the application of the novel C-CNT composite membrane, the ammonia separation factor is 47% and 25% higher than that of commercial and neat PVDF membranes. This work gives a novel approach for enhancing ammonia and water selectivity during AD effluent treatment.

Study on treatment of wastewater with low concentration of ammonia-nitrogen by vacuum plate membrane distillation technology

The removal of low concentration ammonia-nitrogen in industrial wastewater is necessary before discharged into the environment. In this study, vacuum plate membrane distillation (VPMD) technology was utilized and operating parameters such as pH, feed temperature, vacuum degree, feed flow and time were investigated. Based on the experimental data, the heat and mass transfer mechanism and mathematic model were studied. The experimental results show that low solution pH was significantly beneficial to ammonia-nitrogen removal but permeate flux was nearly changeless. At pH = 4, a removal rate up to 93.33% was achieved. Ammonia-nitrogen mainly exists with NH₄⁺ ions in acidic solution, so only water molecules pass through the membrane to acquire the water product in the permeate side. Increasing the temperature of the solution was disadvantageous to the ammonia-nitrogen removal due to membrane pores expanding and the mass transfer coefficient of NH₃ molecules increasing; therefore a low temperature was chosen if possible. Because vapor pressure of the feed solution increases exponentially with temperature and results in membrane surface pressure difference increases, therefore increasing the temperature enhances the permeate flux. Raising the vacuum degree enhanced ammonia removal rate and permeate flux obviously, a vacuum degree of 0.09 MPa was chosen for the experiment. The effect of feed flow rate on ammonia-nitrogen removal instead of permeate flux is weak, the reason is that the boundary layer wears thin when the feed flow rate is increased, which is conducive to permeate flux increasing. In a two-parameter model of Knudsen diffusion, Poiseuille flow was chosen to demonstrate the heat and mass transfers in the process of VPMD in the study. Based on the experimental values of permeate flux, two parameters C_K and C_P in the model were calculated using a nonlinear fitting method software, which indicated that the Knudsen diffusion model more than the Poiseuille flow model was suitable. The maximum values of the relative average deviation (RAD) and root mean square difference (RMSD) of experimental and calculated values with model equations of the permeate flux at the different temperature, vacuum degree and feed flow rate were no more than 8.7% and 3.20 kg · (m² · h)^-1, respectively.

Rejections and membrane fouling of submerged direct contact hollow-fiber membrane distillation as post-treatment for anaerobic fluidized bed bioreactor treating domestic sewage

In this study, submerged direct contact membrane distillation (SDCMD) with a hollow-fiber membrane was applied as a post-treatment for an anaerobic fluidized bed bioreactor (AFBR) treating domestic sewage. The rejection efficiency of organic contaminants and nutrients, such as ammonia nitrogen and phosphate in SDCMD were investigated. As the transmembrane temperature difference increased, the permeate flux of SDCMD increased, while the rejection efficiency of ammonia nitrogen decreased. Regardless of the transmembrane temperature applied in this study, rejection efficiencies greater than 90% were achieved for organics and phosphate by SDCMD treatment of the AFBR effluent. A higher solution pH resulted in a lower ammonia nitrogen rejection efficiency, probably because nitrogen dominantly exists in the gaseous form and can easily pass through the hollow-fiber membrane. Long-term operation with the integrated AFBR-SDCMD process over 50 d at a transmembrane temperature of 30 °C and solution pH of 5.5 showed rejection efficiencies of 98.7%, 98.1%, and 90.5% for ammonia nitrogen, phosphate, and dissolved organic carbon (DOC), respectively. During the entire integrated process for treating domestic sewage, both DOC and nutrients present in the bulk solution of the SDCMD reactor were effectively removed to a concentrate. However, the permeate flux produced by the SDCMD membrane decreased over time, mainly because of the progressive biofouling.

Recovering metal(loids) and rare earth elements from closed landfill sites without excavation: Leachate recirculation opportunities and challenges

Metal (loids) and Rare Earth Elements (REE) ('metals') are used in a wide range of products, and therefore, the improvement of expectations for everyday comforts with demand continues to grow. Metal-bearing wastes are a secondary source of raw material that can meet this demand by providing a previously unconsidered low impact supply source. Total annual leachate production is 1,056,716 m³. Therefore, landfill leachate emerges as a significant potential resource as it contains high concentrations of metals. However, realising a profitable return on investment for leachate processing is a challenge due to relatively low recovery rates of approximately 0.02% of total heavy metals in a landfill being leached out in 30 years. Variation within the multi-element value and the effect of other chemicals in these complex mixtures. There is a need to better understand the mechanisms and potential applicability of extraction methods for optimising metals recovery from leachate. This paper addresses this need by providing a systematic review of the critical factors and environmental conditions that influence the behaviour of metals within the landfilled waste. The paper provides a synthesis of how the factors and conditions may affect leachate recirculation efficiency for recovery in the context of a range of opportunities and challenges facing circular economy practitioners. To approach feasibility metal recovery economically from landfill leachate without energy-intensive and environmentally destructive, future research actions need to be initiated in lab-based and later on semi-pilot to pilot studies, which the review can help achieve the challenges.

Membrane Distillation for Wastewater Treatment: A Mini Review

Water serves as an indispensable part of human life and production. On account of the overexploitation of traditional water sources, the demand for wastewater recycling is expanding rapidly. As a promising water treatment process, membrane distillation (MD) has been utilized in various wastewater treatments, such as desalination brine, textile wastewater, radioactive wastewater, and oily wastewater. This review summarized the investigation work applying MD in wastewater treatment, and the performance was comprehensively introduced. Moreover, the obstructions of industrialization, such as membrane fouling, membrane wetting, and high energy consumption, were discussed with the practical investigation. To cope with these problems, various strategies have been adopted to enhance MD performance, including coupling membrane processes and developing membranes with specific surface characteristics. In addition, the significance of nutrient recovery and waste heat utilization was indicated.