Ag/γ-AgI/Bi2O2CO3/Bi S-scheme heterojunction with enhanced photocatalyst performance

Enhanced photocatalytic activity of magnetically recyclable spherical Fe3O4/Cu2O S-scheme heterojunction

In this study, magnetically recyclable spherical Fe3O4/Cu2O particles comprising S-scheme heterojunctions were prepared by a simple hydrothermal approach using n-type semiconductor Fe3O4 as precursor and p-type semiconductor Cu2O. A Fenton-like system was thus constructed via the addition to Fe3O4/Cu2O of hydrogen peroxide. A rhodamine B (RhB) solution was used to simulate polluted wastewater, and photocatalytic RhB removal experiments were conducted under visible light irradiation. Powder X-ray diffractometry, vibrating-sample magnetometry, nitrogen adsorption-desorption, transmission electron microscopy, and X-ray photoelectron spectroscopy experiments were conducted to characterise Fe3O4 and Fe3O4/Cu2O composite. The band gap of Fe3O4/Cu2O was 1.76 eV, narrower than that of Fe3O4 (2.14 eV). The effects of the pH, sample dosage, hydrogen peroxide concentration, and RhB initial concentration on RhB removal were investigated. According to evidence, under the optimum reaction conditions, the RhB removal rate was 99.4%. The Fe3O4/Cu2O composite exhibited good photocatalytic efficacy even after four cycles of testing. Based on the results of free radical capture experiments, hydroxyl radicals and holes cooperated as main reactive species in the photocatalytic system. The Fe3O4/Cu2O photocatalyst can be easily removed based on magnetism, and it has been proven to be very effective for the degradation of RhB under both UV and visible light irradiation.

In situ construction of Ag/Bi2O3/Bi5O7I heterojunction with Bi-MOF for enhance the photocatalytic efficiency of bisphenol A by facet-coupling and s-scheme structure

In this study, Ag/Bi2O3/Bi5O7I with s-scheme heterostructures were successfully synthesized in situ by nano-silver modification of CUA-17 and halogenated hydrolysis.The growth rate of Bi2O3 crystals was effectively controlled by adjusting the doping amount of Ag, resulting in the formation of a facet-coupling heterojunctions. Through the investigation of the microstructure and compositional of catalysts, it has been confirmed that an intimate facet coupling between the Bi2O3 (120) facet and the Bi5O7I (312) facet, which provides robust support for charge transfer. Under visible light irradiation, the AgBOI.3 heterojunction photocatalyst exhibited an outstanding degradation rate of 98.2% for Bisphenol A (BPA) with excellent stability. Further characterization using optical, electrochemical, impedance spectroscopy, and electron spin resonance techniques revealed significantly enhanced efficiency in photogenerated charge separation and transfer, and confirming the s-scheme structure of the photocatalyst. Density functional theory calculations was employed to elucidate the mechanism of BPA degradation and the degradation pathway of BPA was investigated by LC-MS. Finally, the toxicity of the degradation intermediates was evaluated using T.E.S.T software.

Construction of BiOCl/bismuth-based halide perovskite heterojunctions derived from the metal-organic framework CAU-17 for effective photocatalytic degradation

The designed synthesis of an S-scheme heterojunction has possessed a great potential for improving photocatalytic wastewater treatment by demonstrating increased the photoredox capacity and improved the charge separation efficiency. Here, we introduce the fabrication of a heterojunction-based photocatalyst comprising bismuth oxychloride (BiOCl) and bismuth-based halide perovskite (BHP) nanosheets, derived from metal-organic frameworks (MOFs). Our composite photocatalyst is synthesized through a one-pot solvothermal strategy, where a halogenation process is applied to a bismuth-based metal-organic framework (CAU-17) as the precursor for bismuth sourcing. As a result, the rod-like structure of CAU-17 transforms into well-defined plate and nanosheet architectures after 4 and 8 h of solvothermal treatment, respectively. The modulation of the solvothermal reaction time facilitates the establishment of an S-scheme heterojunction, resulting in an increase in the photocatalytic degradation efficiency of rhodamine B (RhB) and sulfamethoxazole (SMX). The optimized BiOCl/BHP composite exhibits superior RhB and SMX degradation rates, achieving 99.8% degradation of RhB in 60 min and 75.1% degradation of SMX in 300 min. Also, the optimized BiOCl/BHP composite (CAU-17-st-8h sample) exhibited the highest rate constant (k = 3.48 × 10-3 min-1), nearly 6 times higher than that of the bare BHP in the photocatalytic degradation process of SMX. The enhanced photocatalytic efficiency can be endorsed to various factors: (i) the in-situ formation of two-components BiOCl/BHP photocatalyst, derived from CAU-17, effectively suppresses the aggregation of pristine BHP and BiOCl particles; (ii) the S-scheme heterostructure establishes a closely-knit interfacial connection, thereby facilitating efficient pathways for charge separation/transfer; and (iii) the BiOCl/BHP heterostructure enhances its capacity to absorb visible light. Our investigation establishes an effective strategy for constructing heterostructured photocatalysts, offering significant potential for application in photocatalytic wastewater treatment.

Sn and dual-oxygen-vacancy in the Z-scheme Bi2Sn2O7/Sn/NiAl-layered double hydroxide heterojunction synergistically enhanced photocatalytic activity toward carbon dioxide reduction

Photocatalytic conversion of carbon dioxide (CO2) into high value-added chemicals is an attractive yet challenging process, primarily due to the readily recombination of hole-electron pairs in photocatalysts. Herein, dual-oxygen-vacancy mediated Z-scheme Bi2Sn2O7/Sn/NiAl-layered double hydroxide (VO,O-20BSL) heterojunctions were hydrothermally synthesized and subsequently modified with Sn monomers to enhance photocatalytic activity toward CO2 reduction. The abundance of oxygen vacancies endowed the VO,O-20BSL with extended optical adsorption, enhanced charges separation, and superior CO2 adsorption and activation. The interfacial charges transfer of the VO,O-20BSL was demonstrated to follow a Z-scheme mechanism via photochemical deposition of metal/metal oxide. Under visible light irradiation, the VO,O-20BSL exhibited the highest yields of carbon monoxide (CO) and methane (CH4), with values of 72.03 and 0.85 umol·g-1·h-1, respectively, which were 2.66 and 1.57 times higher than that of the VO-NiAl-layered double hydroxide (VO-1LDH). In situ diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) revealed that carboxylic acid groups (COOH*) and aldehyde groups (CHO*) were the predominant intermediates during CO2 reduction, and accordingly, possible CO2 reduction pathways and mechanism were proposed. This study presents a feasible approach to incorporate dual vacancies into Z-scheme heterojunctions for CO2 reduction.

B4C/Ce co-modified Ti/PbO2 dimensionally stable anode: Facile one-step electrodeposition preparation and highly efficient electrocatalytic degradation of tetracycline

The application of PbO2 for electrochemical oxidation technology is limited by its low electrocatalytic activity and short service life. Herein, based on the facile one-step electrodeposition, we prepared a boron carbide (B4C) and cerium (Ce) co-modified Ti/PbO2 (Ti/PbO2-B4C-Ce) electrode to overcome these shortcomings. Compared with Ti/PbO2 electrode, the denser surface is displayed by Ti/PbO2-B4C-Ce electrode. Meanwhile, electrochemical characterization indicates that the introduction of B4C and Ce significantly enhance the electrochemical performance of PbO2 electrode. In degradation experiments, under optimized conditions (current density 20 mA cm-2, pH 9, 0.15 M Na2SO4 and 30 °C), the fully degradation of tetracycline (TC) can be completed within 30 min. Furthermore, the trapping experiment demonstrates that ∙OH and SO4·- radicals have a synergistic effect in the degradation process of TC. Based on results of liquid chromatography-mass spectrometer, the generated ·OH preferentially attacks amides, phenols and conjugated double bond groups in TC. Importantly, Ti/PbO2-B4C-Ce electrode maintains a constant degradation efficiency even after 10 recycling tests, and its service life is 2.4 times of traditional Ti/PbO2 electrode. Hence, Ti/PbO2-B4C-Ce electrode is a promising electrode for degradation of organic wastewater containing amides, phenols, and conjugated double bond groups.

Design and construction of a robust ternary Bi5O7I/Cd0.5Zn0.5S/CuO photocatalytic system for boosted photodegradation of antibiotics via dual-S-scheme mechanisms: Environmental factors and degradation intermediates

The detection of efficacious and environment-friendly nanomaterials with prominent photocatalytic performance is crucial for the detoxification of antibiotics in wastewater. Herein, a dual-S-scheme Bi5O7I/Cd0.5Zn0.5S/CuO semiconductor was designed and fabricated via a simple approach to degrade tetracycline (TC) and other types of antibiotics under LED illumination. However, Cd0.5Zn0.5S and CuO nanoparticles were decorated on the surface of the Bi5O7I microsphere to create a dual-S-scheme system that stimulates visible-light utilization and facilitates the dissolution of excited photo-curriers. Therefore, the Bi5O7I/Cd0.5Zn0.5S/CuO system offers strong redox ability, which reflects reinforced photocatalytic activity and robust stability. The ternary heterojunction discloses enhanced TC detoxification efficiency of 92% in 60 min with TC destruction rate constant of 0.04034 min-1, outperforming pure Bi5O7I, Cd0.5Zn0.5S, and CuO by 4.27, 3.20, and 4.80 folds, respectively. Besides, Bi5O7I/Cd0.5Zn0.5S/CuO manifests outstanding photo-activity against a series of antibiotics like norfloxacin, enrofloxacin, ciprofloxacin, and levofloxacin under the same operational conditions. The active species detection, TC destruction pathways, catalyst stability, and photoreaction mechanisms of Bi5O7I/Cd0.5Zn0.5S/CuO were accurately explained in detail. Summarily, this work introduces a new class of dual-S-scheme system with strengthened catalytic properties to effectively eliminate the antibiotics in wastewater under visible-light illumination.

Original self-assembled S-scheme BiOBr-(001)/Bi2SiO5/Bi heterojunction photocatalyst with rich oxygen vacancy for boosting CO2 reduction performance

Photocatalysis CO₂ reduction into high-value-added chemical feedstocks is desirable for simultaneously addressing the solar energy storage, CO₂ excess and energy shortage issues. In this work, a kind of original S-scheme BiOBr-(001)/Bi₂SiO₅/Bi (OSB) heterostructure photocatalyst with rich oxygen vacancies is in-situ synthesized, which significantly promotes the photocatalytic CO₂ reduction performance. Interestingly, the lower formation energy of oxygen vacancy exhibits the easy feasibility on the BiOBr-(001) surface via the assistant of ultrasound. There exists the highest photocatalytic CO₂ reduction activity to CO of 234.05 μmol g^-1h^-1 for OSB-20 sample (ultrasound time: 20 min), higher 3.3 times than OSB-0 sample (without ultrasound). Combined with experimental and calculated results, the significative formation mechanism, widened light-response range, highly-efficient separation/transfer paths and improved redox-reduction abilities of photogenerated electron-hole pairs for S-scheme OSB-20 heterostructure are investigated and proposed. Our findings provide new insights for the construction and synthesis of the S-scheme Bi-based heterojunction photocatalyst system.

Pine Dendritic Bi/BiOBr Photocatalyst for Efficient Degradation of Antibiotics

Constructing Bi/BiOX (X = Cl, Br) heterostructures with unique electron transfer channels enables charge carriers to transfer unidirectionally at the metal/semiconductor junction and inhibits the backflow of photogenerated carriers. Herein, novel pine dendritic Bi/BiOX (X = Cl, Br) nanoassemblies with multiple electron transfer channels have been successfully synthesized with the assistance of l-cysteine (l-Cys) through a one-step solvothermal method. Such a pine dendritic Bi/BiOBr photocatalyst shows excellent activity toward the degradation of many antibiotics such as tetracycline (TC), norfloxacin, and ciprofloxacin. In particular, its photocatalytic degradation activity of TC is higher than those of reference spherical Bi/BiOBr, lamellar BiOBr, and BiOBr/Bi/BiOBr double-sided nanosheet arrays. Comprehensive characterizations demonstrate that the pine dendritic structure can construct multiple electron transfer channels from BiOBr to metallic Bi, resulting in an obviously promoted separation efficiency of photogenerated carriers. The synthesis method that uses l-Cys to control the morphology provides a guidance to prepare special metal/semiconductor photocatalysts and would be helpful to design a highly efficient photocatalytic process.

Construction of an S-Scheme Ag2MoO4/ZnFe2O4 Nanofiber Heterojunction for Enhanced Photoelectrocatalytic Activity under Visible Light Irradiation

The removal of organic dyes and pathogenic bacteria from contaminated water remains a significant challenge. In the present study, S-type heterojunction Ag₂MoO₄/ZnFe₂O₄ (AMO/ZFO) composite nanofibers were synthesized by electrospinning and co-precipitation and fabricated into photoanodes. It is found that the constructed S-type heterojunction of AMO/ZFO composites effectively inhibits the recombination of photogenerated carriers, in addition to the benefits of more exposed active sites and a greater specific surface area. When several properties are improved, AMO/ZFO composites exhibit excellent photoelectrocatalytic performance. The results demonstrate that under visible light irradiation, the photoelectrocatalytic degradation rate of AMO/ZFO-3 to methylene blue reached 76.2% within 50 min, and the killing rate of Salmonella was 83.6% within 80 min. The enhanced photoelectrocatalytic activity was due to the synergy of both electrochemical and photocatalytic effects. More importantly, after four testing cycles, AMO/ZFO-3 still has a better ability to kill pathogenic bacteria and degrade organic dyes due to its high stability. This work provides a feasible method for oxidizing organic dyes and pathogenic bacteria.

Visible light driven antibiotics degradation using S-scheme Bi2WO6/CoIn2S4 heterojunction: Mechanism, degradation pathways and toxicity assessment

S-scheme heterojunction photocatalysts with strong redox ability and excellent photocatalytic activity are highly desired for photocatalytic degradation of pollutants. Herein, S-scheme Bi₂WO₆/CoIn₂S₄ heterojunctions were synthesized using hydrothermal method. The photo-induced carriers transfer mechanism of the S-scheme Bi₂WO₆/CoIn₂S₄ heterojunction was clarified by band structure analysis, ultraviolet photoelectron spectrometer (UPS), electron spin resonance (ESR) and radical trapping experiments. Significant enhance of light absortion, and more efficient carriers separation were observed from the Bi₂WO₆/CoIn₂S₄ with CoIn₂S₄ nanoclusters growing on the surface of petal-like Bi₂WO₆ nanosheets. TC degradation efficiency of 90% was achieved by Bi₂WO₆/CoIn₂S₄ (15:1) within 3 h of irradiation, and ·O₂^-and ·OH radicals were dominated contributors. Possible decomposition pathways of TC were proposed, and ECOSAR analysis showed that most of the intermediates exhibited lower ecotoxicity than TC. This work provides reference on the constructing ternary-metal-sulfides-based S-scheme heterojunctions for improving photocatalytic performance.

Construction of Z-scheme Ag-AgBr/Bi2O2CO3/CNT heterojunctions with remarkable photocatalytic performance using carbon nanotubes as efficient electronic mediators

It is a useful strategy to use a solid electronic mediator with good conductivity to assist the separation of semiconductor photo-induced electron-hole pairs and the redox of semiconductor materials. In order to construct a photocatalyst for more efficient photocatalytic degradation of antibiotics, a simple hydrothermal and precipitation method was used to construct the Ag-AgBr/Bi₂O₂CO₃/CNT Z-scheme heterojunction by using carbon nanotubes (CNTs) as electronic mediators. Compared with the pristine AgBr, Bi₂O₂CO₃, Bi₂O₂CO₃/CNT, the 30%Ag-AgBr/Bi₂O₂CO₃/CNT photocatalyst has better photocatalytic activity under visible light irradiation, showing the best degradation ability to tetracycline (TC). Meanwhile, the photocatalytic properties of 30%Ag-AgBr/Bi₂O₂CO₃/CNT in different pH and inorganic ions were studied. Finally, the degradation pathway and catalytic mechanism of 30%Ag-AgBr/Bi₂O₂CO₃/CNT photocatalytic degradation of TC were also argued. The construction of the Z-scheme electron transport pathway, in which CNTs were used as electronic mediators, and the SPR effect of Ag and Bi metal, which enable the effective separation and transfer of photo-generated electron-hole pairs, are responsible for the significant improvement in photocatalytic performance. It opens up new possibilities for designing and developing high-efficiency photocatalysts with CNTs as the electronic mediator.

Emerging S-Scheme Photocatalyst

Photocatalysis is a green technology to use ubiquitous and intermittent sunlight. The emerging S-scheme heterojunction has demonstrated its superiority in photocatalysis. This article covers the state-of-the-art progress and provides new insights into its general designing criteria. It starts with the challenges confronted by single photocatalyst from the perspective of energy dissipation by borrowing the common behaviors in the dye molecule. Subsequently, other problems faced by single photocatalyst are summarized. Then a viable solution for these problems is the construction of heterojunctions. To overcome the problems and mistakes of type-II and Z-scheme heterojunctions, S-scheme heterojunction is proposed and the underlying reaction mechanism is summarized. Afterward, the design principles for S-scheme heterojunction are proposed and four types of S-scheme heterojunctions are suggested. Following this, direct characterization techniques for testifying the charge transfer in S-scheme heterojunction are presented. Finally, different photocatalytic applications of S-scheme heterojunctions are summarized. Specifically, this work endeavors to clarify the critical understanding on curved Fermi level in S-scheme heterojunction interface, which can help strengthen and advance the fundamental theories of photocatalysis. Moreover, the current challenges and prospects of the S-scheme heterojunction photocatalyst are critically discussed.

A novel S-scheme heterojunction based on 0D/3D CeO2/Bi2O2CO3 for photocatalytic degradation of organic pollutants

A distinct S-scheme heterojunction of 0D/3D CeO2/Bi2O2CO3 photocatalyst was successfully synthesized via hydrothermal method employing for photocatalytic degradation of methylene blue (MB), tetracycline (TC) and aureomycin (AM). Compared with bare...

Heterojunction photocatalysts for degradation of the tetracycline antibiotic: a review

Antibiotic pollution is a major health issue inducing antibiotic resistance and the inefficiency of actual drugs, thus calling for improved methods to clean water and wastewater. Here we review the recent development of heterojunction photocatalysis and application in degrading tetracycline. We discuss mechanisms for separating photogenerated electron-hole pairs in different heterojunction systems such as traditional, p-n, direct Z-scheme, step-scheme, Schottky, and surface heterojunction. Degradation pathways of tetracycline during photocatalysis are presented. We compare the efficiency of tetracycline removal by various heterojunctions using quantum efficiency, space time yield, and figures of merit. Implications for the treatment of antibiotic-contaminated wastewater are discussed.