BiVO4 ternary photocatalyst co-modified with N-doped graphene nanodots and Ag nanoparticles for improved photocatalytic oxidation: A significant enhancement in photoinduced carrier separation and broad-spectrum light absorption

Development of Bi2S3/Cu2S hetrojuction as an effective photocatalysts for the efficient degradation of antibiotic drug and organic dye

Herein, a Bi2S3/Cu2S was successfully synthesized via a simple one-step wet impregnation process. The compositional behavior and electrical and optical properties of photocatalysts were investigated in detail. Photocatalytic technology has shown great promise in wastewater treatment, splitting water to hydrogen, and converting CO2 to fuel. Researchers or scientist are attempting to design sulfate-based heterojunction photocatalytic systems in order to develop novel photocatalysts with excellent performance. Photodegradation of methylene blue (MB) dye and tetracycline (TC) drug under visible light irradiation was used to assess the photocatalytic activity of as-prepared samples. As a result, 2:1% wt of Bi2S3/Cu2S heterostructure composite revealed superior visible light degradation performing of MB dye, and TC drug efficiency as 90.2% and 87.5%, respectively. The prepared hybrid photocatalyst has demonstated a potential for use in the photocatalytic degradation of antibiotic durgs and dyes, indicating a promissing future for its application.

Synergistic Effect of Co3(HPO4)2(OH)2 Cocatalyst and Al2O3 Passivation Layer on BiVO4 Photoanode for Enhanced Photoelectrochemical Water Oxidation

Bismuth vanadate (BVO) is regarded as an exceptional photoanode material for photoelectrochemical (PEC) water splitting, but it is restricted by the severe photocorrosion and slow water oxidation kinetics. Herein, a synergistic strategy combined with a Co3(HPO4)2(OH)2 (CoPH) cocatalyst and an Al2O3 (ALO) passivation layer was proposed for enhanced PEC performance. The CoPH/ALO/BVO photoanode exhibits an impressive photocurrent density of 4.9 mA cm-2 at 1.23 VRHE and an applied bias photon-to-current efficiency (ABPE) of 1.47% at 0.76 VRHE. This outstanding PEC performance can be ascribed to the suppressed surface charge recombination, facilitated interfacial charge transfer, and accelerated water oxidation kinetics with the introduction of the CoPH cocatalyst and ALO passivation layer. This work provides a novel and synergistic approach to design an efficient and stable photoanode for PEC applications by combining an oxygen evolution cocatalyst and a passivation layer.

Potential of novel dual Z-scheme carbon quantum dots decorated MnIn2S4/CdS/Bi2S3 heterojunction for environmental applications

In this work, CQDs decorated MnIn₂S₄/CdS/Bi₂S₃ heterojunction was prepared successfully by hydrothermal technique for photocatalytic disinfection of Escherichia coli (E. coli) and mineralization of methyl orange (MO) dye. The charge transferal route and mineralization process in CQDs-MnIn₂S₄/CdS/Bi₂S₃ heterojunction were comprehensively investigated by advanced spectroscopic techniques. The improved visible-light activity and enhanced photo-generated charge transferal efficacy caused dual Z-scheme CQDs-MnIn₂S₄/CdS/Bi₂S₃ heterojunction to achieve boosted photodegradation ability. The catalytic degradation trend was followed as CQDs-MnIn₂S₄/CdS/Bi₂S₃ > MnIn₂S₄ > CdS > Bi₂S₃. The dye was mineralized within 180 min under visible light irradiation. The effect of reaction parameters, pH effect, catalyst dosage, and H₂O₂ addition on MO degradation was also investigated. The degradation rate was maximal at pH 4 with a pseudo-first-order rate constant, 0.0438 min^-1. The assessment of antibacterial properties revealed that CQDs-MnIn₂S₄/CdS/Bi₂S₃ composite effectively inactivated E. coli under visible light. Scavenging experiments, transient photocurrent response, and electron spin resonance spectroscopy suggested that ^•[Formula: see text] and holes were the dominant reactive species. The Z-scheme heterojunction is recyclable up to ten photocatalytic cycles according to recycling experiments. This research indicates the importance of dual Z-scheme CQDs decorated MnIn₂S₄/CdS/Bi₂S₃ heterojunction in wastewater remediation.

Effective photodegradation of antibiotics by guest-host synergy between photosensitizer and bismuth vanadate: Underlying mechanism and toxicity assessment

The removal of antibiotics in wastewater has attracted increasing attention. Herein, a superior photosensitized photocatalytic system was developed with acetophenone (ACP) as the guest photosensitizer, bismuth vanadate (BiVO₄) as the host catalyst and poly dimethyl diallyl ammonium chloride (PDDA) as the bridging complex, and used for the removal of sulfamerazine (SMR), sulfadiazine (SDZ) and sulfamethazine (SMZ) in water under simulated visible light (λ > 420 nm). The obtained ACP-PDDA-BiVO₄ nanoplates attained a removal efficiency of 88.9%-98.2% for SMR, SDZ and SMZ after 60 min reaction and achieved kinetic rate constant approximately 10, 4.7 and 13 times of BiVO₄, PDDA-BiVO₄ and ACP-BiVO₄, respectively, for SMZ degradation. In the guest-host photocatalytic system, ACP photosensitizer was found to have a great superiority in enhancing the light absorption, promoting the surface charge separation-transfer and efficient generation of holes (h⁺) and superoxide radical (·O₂^-), greatly contributing to the photoactivity. The SMZ degradation pathways were proposed based on the identified degradation intermediates, involving three main pathways of rearrangement, desulfonation and oxidation. The toxicity of intermediates was evaluated and the results demonstrated that the overall toxicity was reduced compared with parent SMZ. This catalyst maintained 92% photocatalytic oxidation performance after five cyclic experiments and displayed a co-photodegradation ability to others antibiotics (e.g., roxithromycin, ciprofloxacin et al.) in effluent water. Therefore, this work provides a facile photosensitized strategy for developing guest-host photocatalysts, which enabling the simultaneous antibiotics removal and effectively reduce the ecological risks in wastewater.

BiVO4 As a Sustainable and Emerging Photocatalyst: Synthesis Methodologies, Engineering Properties, and Its Volatile Organic Compounds Degradation Efficiency

Bismuth vanadate (BiVO₄) is one of the best bismuth-based semiconducting materials because of its narrow band gap energy, good visible light absorption, unique physical and chemical characteristics, and non-toxic nature. In addition, BiVO₄ with different morphologies has been synthesized and exhibited excellent visible light photocatalytic efficiency in the degradation of various organic pollutants, including volatile organic compounds (VOCs). Nevertheless, the commercial scale utilization of BiVO₄ is significantly limited because of the poor separation (faster recombination rate) and transport ability of photogenerated electron-hole pairs. So, engineering/modifications of BiVO₄ materials are performed to enhance their structural, electronic, and morphological properties. Thus, this review article aims to provide a critical overview of advanced oxidation processes (AOPs), various semiconducting nanomaterials, BiVO₄ synthesis methodologies, engineering of BiVO₄ properties through making binary and ternary nanocomposites, and coupling with metals/non-metals and metal nanoparticles and the development of Z-scheme type nanocomposites, etc., and their visible light photocatalytic efficiency in VOCs degradation. In addition, future challenges and the way forward for improving the commercial-scale application of BiVO₄-based semiconducting nanomaterials are also discussed. Thus, we hope that this review is a valuable resource for designing BiVO₄-based nanocomposites with superior visible-light-driven photocatalytic efficiency in VOCs degradation.

Polarization-resolved and helicity-resolved Raman spectra of monolayer XP3 (X = Ge and In)

Monolayer XP₃ (X = Ge, In) is a theoretically predicted two-dimensional (2D) material with fascinating adsorption efficiency, foreshadowing its potential applications in the photovoltaic and optoelectronic communities. To achieve a comprehensive understanding of its optical properties and to further boost quickly identifying its specific applications, in this paper we systematically investigated the polarization-resolved and helicity-resolved Raman spectra excited by two commonly used laser lines (532 nm and 633 nm) through density functional theory. The dynamical stability of monolayer XP₃ is demonstrated by phonon dispersion. Monolayer GeP₃ and InP₃ are found to exhibit significantly different point group symmetries and thereby Raman properties due to the big difference in atomic size and electronic configurations between the Ge atom and In atom. Raman anisotropy of monolayer XP₃ has been found when the wave vector of linear polarized incident light is parallel to the monolayer, and all the anisotropic Raman active phonons are categorized in terms of the locations of two (four) maxima in polarization angle dependent Raman intensities of the parallel (perpendicular) configuration. The polarization direction averaged Raman spectra have been further discussed according to the characteristics of light absorbance. The calculations of helicity-resolved Raman spectra indicate a stronger helicity selection rule under helical excitation with the wave vector normal to the monolayer. The present work paves the way for the suitable design, characterization and exploitation of the proposed 2D material with controllable surface properties for applications in electronics and optoelectronics.

ZnO/Cu2O/g-C3N4 heterojunctions with enhanced photocatalytic activity for removal of hazardous antibiotics

In view of the environmental pollution caused by antibiotics, the creation of an efficient photocatalytic material is an effectual way to carry out water remediation. Herein, we developed a smart strategy to synthesize ZnO/Cu₂O/g-C₃N₄ heterojunction photocatalysts for the photodegradation of hazardous antibiotics by one-pot synthesis method. In this system, the Cu₂O nanoparticles with electrons reducing capacity were coupled with g-C₃N₄ composites. The photocarriers were generated from the electric field of type Ⅰ heterojunction between ZnO and g-C₃N₄ and type Ⅱ heterojunction between Cu₂O and g-C₃N₄. ZnO as a co-catalyst was doped to Cu₂O/g-C₃N₄ catalyst system for removal of broad-spectrum antibiotics with the condition of visible light to protect Cu₂O from photocorrosion, which thereby accelerated photocatalytic reactivity. Benefiting by new p-n-n heterojunction, the resulting ZnO/Cu₂O/g-C₃N₄ composites had an excellent degradation performance of broad-spectrum antibiotics such as tetracycline (TC), chlortetracycline (CTC), oxytetracycline (OTC) and ciprofloxacin (CIP), the degradation of which were 98.79%, 99.5%, 95.35% and 73.53%. In particular, ZnO/Cu₂O/g-C₃N₄ photocatalysts showed a very high degradation rate of 98.79% for TC in first 30 min under visible light, which was 1.35 and 10.62 times higher than that of Cu₂O/g-C₃N₄ and g-C₃N₄, respectively. This work gives a fresh visual aspect for simultaneously solving the instability deficiencies of traditional photocatalysts and improving photocatalytic performance.

Deep-Eutectic-Solvent-Assisted Synthesis of a Z-Scheme BiVO4/BiOCl/S,N-GQDS Heterojunction with Enhanced Photocatalytic Degradation Activity under Visible-Light Irradiation

Z-scheme heterojunction photocatalytic nanomaterial designs have attracted attention due to their high catalytic performance. Deep eutectic solvents (DESs) have been used as green, sustainable media, acting as solvents and structure inducers in the synthesis of nanomaterials. In this work, a novel visible-light-absorption-enhanced bismuth vanadate/bismuth oxychloride/sulfur, nitrogen co-doped graphene quantum dot (BiVO₄/BiOCl/S,N-GQDS) heterojunction photocatalyst was prepared in a deep eutectic solvent. The photosynthetic activity of the BiVO₄/BiOCl/S,N-GQDS composite was determined by the photocatalytic degradation of rhodamine B (RhB) under visible-light irradiation. The results showed that the highest photocatalytic activity of BiVO₄/BiOCl/S,N-GQDS was achieved when the doping amount of S,N-GQDS was 3%, and the degradation rate of RhB reached 70% within 5 h. The kinetic and photocatalytic cycles showed that the degradation of Rhb was in accordance with the quasi-primary degradation kinetic model, and the photocatalytic performance remained stable after four photocatalytic cycles. Ultraviolet-visible diffuse reflectance (UV-DRS) and photoluminescence (PL) experiments confirmed that BiVO₄/BiOCl/S,N-GQDS ternary heterojunctions have a narrow band gap energy (2.35 eV), which can effectively improve the separation efficiency of the photogenerated electron-hole pairs and suppress their complexation. This is due to the construction of a Z-scheme charge process between the BiVO₄/BiOCl binary heterojunction and S,N-GQDS, which achieves effective carrier separation and thus a strong photocatalytic capability. This work not only provides new insights into the design of catalysts using a green solvent approach but also provides a reference for the study of heterojunction photocatalytic materials based on bismuth vanadate, as well as new ideas for other photocatalytic materials.

Enhanced Photocatalytic Degradation of Tetracycline and Oxytetracycline Antibiotics by BiVO4 Photocatalyst under Visible Light and Solar Light Irradiation

The efficient degradation of a toxic antibiotic from an aqueous solution is essential for environmental protection. Our research aimed to fabricate a bismuth vanadate (BiVO4) catalyst via a facile hydrothermal method. The prepared catalyst exhibited a monoclinic phase with a band gap energy of 2.33 eV, indicating the excellent visible-light-active properties of a semiconductor. The photocatalytic performance of the synthesized BiVO4 catalyst was studied by determining the removal of tetracycline (TC) and oxytetracycline (OTC) antibiotics. After 240 min, under sunlight conditions, a high performance of 72% and 83% degradation of TC and OTC, respectively, was achieved. The photocatalytic degradation of the antibiotics correlates well with a first-order reaction, with a high rate constant of 0.0102 min−1. Photogenerated electrons and holes played an important role in the removal of the pollutant. After photocatalytic study, the structural stability of the prepared bismuth vanadate photocatalyst was confirmed. The photocatalyst provided a promising performance even after five successive runs. The result indicates the excellent cycling ability of the sample. The present work demonstrates a promising route for the preparation of a BiVO4 catalyst for the complete removal of toxic antibiotics in aqueous solutions.

Improved photoredox activity of the 2D Bi4Ti3O12–BiVO4–Bi4V2O10 heterostructure via the piezoelectricity-enhanced charge transfer effect

The formation of the 2D Bi4Ti3O12–BiVO4–Bi4V2O10 heterostructure and the piezoelectric effect on photoredox activity improvements.

The enhanced photocatalytic activity of TiO2(B)/MIL-100(Fe) composite via Fe–O clusters

An integrated TiO2(B)/MIL-100(Fe) composite was designed for improving photocatalytic activity via Fe–O–Ti electronic tunnel and Fe–O clusters.