Construction of UiO-66@MoS2 flower-like hybrids through electrostatically induced self-assembly with enhanced photodegradation activity towards lomefloxacin

Efficient photocatalytic activity and selective adsorption of UiO-67 (Zr)/g-C3N4 composite toward a mixture of parabens

In this study, UiO-67 (Zr)/g-C3N4 composites (U67N) were synthesized at wt.% ratios of 05:95, 15:85, and 30:70 using the solvothermal method at 80 °C for 24 h followed by calcination at 350 °C. The composites were characterized using UV-Vis diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy-energy-dispersive X-ray spectroscopy, transmission electron microscopy, and nitrogen physisorption analysis. In addition, thermal stability analysis of UiO-67 was conducted using thermogravimetric analysis. The photocatalytic performance of the composites was assessed during the degradation and mineralization of a mixture of methylparaben (MeP) and propylparaben (PrP) under simulated sunlight. The adsorption process of U67N 15:85 was characterized through kinetic studies and adsorption capacity experiments, which were modeled using pseudo-first-order and pseudo-second-order kinetics and Langmuir and Freundlich isotherms, respectively. The influence of pH levels 3, 5, and 7 on the photocatalytic degradation of the mixture was investigated, revealing enhanced degradation and mineralization at pH 3. The U67N composite exhibited dual capability in removing contaminants through adsorption and photocatalytic processes. Among the prepared composites, U67N 15:85 demonstrated the highest photocatalytic activity, achieving removal efficiencies of 96.8% for MeP, 92.5% for PrP, and 45.7% for total organic carbon in 300 kJ/m2 accumulated energy (3 h of reaction time). The detoxification of the effluent was confirmed through acute toxicity evaluation using the Vibrio fischeri method. The oxidation mechanism of the heterojunction formed between UiO-67 (Zr) and g-C3N4 was proposed based on PL analysis, photoelectrochemistry studies (including photocurrent response, Nyquist, and Mott-Schottky analyses), and scavenger assays.

Au nanoparticle-embellished UiO-66 on reduced graphene oxide as a non-enzymatic electrocatalyst at a remarkably low oxidation potential for glucose oxidation and sensing

Au nanoparticle-embellished metal-organic framework UiO-66 on reduced graphene oxide (Au/UiO-66/rGO) was synthesized. Au/UiO-66/rGO displayed strong electrocatalytic activity for oxidation of glucose in alkaline solution at a remarkably low oxidation potential of +0.20 V vs. Ag/AgCl. Au nanoparticles played a paramount role in the catalytic oxidation of glucose at the electrode, while both rGO and UiO-66 can significantly enhance the current responses to glucose. The resulting non-enzymatic glucose sensor exhibited a wide range of linear response, high sensitivity and selectivity for the determination of glucose. The sensor was successfully applied for the determination of glucose in honey products.

A Chiral Nanocomplex for Multitarget Therapy to Alleviate Neuropathology and Rescue Alzheimer's Cognitive Deficits

Alzheimer's disease (AD) is a severe neurodegenerative condition characterized by inflammation, beta-amyloid (Aβ) plaques, and neurodegeneration, which currently lack effective treatments. Chiral nanomaterials have emerged as a promising option for treating neurodegenerative disorders due to their high biocompatibility, strong sustained release ability, and specific enantiomer selectivity. The development of a stimulus-responsive chiral nanomaterial, UiO-66-NH2 @l-MoS2 QDs@PA-Ni (MSP-U), for the treatment of AD is reported. MSP-U is found to stimulate neural stem cell (NSCs) differentiation, promote in situ hydrogen (H2 ) production, and clear Aβ plaques. l-MoS2 QDs modified with l-Cysteine (l-Cys) effectively enhance the differentiation of NSCs into neurons through circularly polarized near-infrared radiation. Doped-phytic acid nickel (PA-Ni) improves the activity of l-MoS2 QDs in scavenging reactive oxygen species at the lesion site via photocatalytic H2 production. Loading l-MoS2 QDs with UiO-66 type metal oxide suppresses electron-hole recombination effect, thereby achieving rapid charge separation and improving transport of photogenerated electrons, leading to significantly improved H2 production efficiency. The photothermal effect of MSP-U also clears the generated Aβ plaques. In vivo evaluations show that MSP-U improves spatial cognition and memory, suggesting a promising potential candidate for the treatment of AD using chiral nanomaterials.

Construction of urchin-like core-shell Fe/Fe2O3@UiO-66 hybrid for effective tetracycline reduction and photocatalytic oxidation

Although Fe/Fe2O3 has potential application compared with nanoscale zero-valent iron (nZVI), its smooth structure largely limits the catalytic performance. To address this challenge, we innovatively constructed highly efficient composite Fe/Fe2O3@UiO-66 via employing an urchin-like core-shell structure of Fe/Fe2O3 onto UiO-66 through a facile ion exchange precipitation method without inert gas protection. The characterization results show the urchin-like core-shell configuration can extend the life span of Fe0 and produce more active sites. Besides, the absorption spectrum is broadened by Fe2O3 which has narrow band gap and the high-efficiency separation of photogenerated electron-hole pairs is obtained with the load of Fe/Fe2O3. Moreover, Two-parameter pseudo-first-order decay model fits well with the reduction and adsorption of composites in the dark reaction, and a plausible pathway for tetracycline (TC) degradation is also proposed. The findings of this research provide a promising method for promoting the catalytic properties of MOF-based materials and Fe/Fe2O3.

Construction of hexagonal spindle-shaped Fe-MOFs induced by cationic copolymer and its application for effective wastewater treatment

The environment and human health are in danger due to the long-term enrichment and buildup of organic pesticides, dyes, and harmful microbes in wastewater. The development of functional materials that are efficient for treating wastewater remains a significant problem. Eco-friendly hexagonal spindle-shaped Fe-MOFs (Hs-FeMOFs) were created in this study under the influence of cationic copolymer (PMSt). The mechanism of crystal growth and development of its unique morphology were described after looking into impact factors for the ideal circumstances and being characterized by XRD, TEM, XPS, and other techniques. It revealed that Hs-FeMOFs possess an enormous supply of adsorption active sites, a strong electropositivity, and the nanometer tip. Then, typical organic pollutants, such as herbicides and mixed dyes, as well as biological pollutants bacteria, were chosen to assess its efficacy in wastewater treatment. It was discovered that the pendimethalin could be quickly removed in wastewater and the removal rate reached 100% within 10 min. In separation of mixed dyes, the retention rate of malachite green (MG) reached 92.3% in 5 min and with a minimum inhibitory concentration of 0.8 mg/mL and demonstrated strong activity due to the presence of cationic copolymers. In actual water matrix, Hs-FeMOF could also play excellent adsorption and antibacterial activity. In summary, a novel, environmentally friendly MOF material with good activity was successfully created by cationic copolymer induction. It offers a fresh approach to develop functional materials in wastewater treatment.

Construction of HAnW-based nanotwigs for removing inorganic fluorion in wastewater

The environmental pollution with fluoride compounds was currently being paid more and more attention as it threatens the safety of animal and human life in an ecosystem. In this study, an eco-friendly adsorbing material for removing fluoride ion (F^-) was prepared by hydroxyapatite nanowires (HAnWs), a typical biocompatible inorganic conjugates. UiO66, a typical zirconium-based metal-organic framework (MOF), was conjugated onto HAnW by a simple in situ hydrothermal reaction, which afforded a novel HAnW-based nanotwigs of conjugates like millet (UiO66@HAnWs). Being characterized by SEM, EDS, FT-IR, XRD, XPS, and TGA, the obtained UiO66@HAnWs were applied to removing F^- in wastewater, and its adsorption capacity was optimized. It was found that UiO66@HAnWs had a bigger specific surface area (115.310 m²/g), and its efficiency for removing F^- got to 99.3%, which was greatly improved than that of related materials. It was considered that the adsorption of F^- on UiO66@HAnWs was mainly multi-molecular layer adsorption, which fluoride ions aggregate on the Zr(IV) active sites to attain ligand switching, and the nanoconjugated structure like nanotwigs of millet greatly improved its adsorption capacity. In summary, a novel eco-friendly UiO66@HAnWs with nanoconjugated structure could be constructed by simple hydrothermal method, which the agglomeration defects of MOFs were not only ameliorated, but also its adsorption capacity was greatly improved.

In-situ construction of Zr-based metal-organic framework core-shell heterostructure for photocatalytic degradation of organic pollutants

Photocatalysis is an eco-friendly promising approach to the degradation of textile dyes. The majority of reported studies involved remediation of dyes with an initial concentration ≤50 mg/L, which was away from the existing values in textile wastewater. Herein, a simple solvothermal route was utilized to synthesize CoFe2O4@UiO-66 core-shell heterojunction photocatalyst for the first time. The photocatalytic performance of the as-synthesized catalysts was assessed through the photodegradation of methylene blue (MB) and methyl orange (MO) dyes at an initial concentration (100 mg/L). Under simulated solar irradiation, improved photocatalytic performance was accomplished by as-obtained CoFe2O4@UiO-66 heterojunction compared to bare UiO-66 and CoFe2O4. The overall removal efficiency of dyes (100 mg/L) over CoFe2O4@UiO-66 (50 mg/L) reached >60% within 180 min. The optical and photoelectrochemical measurements showed an enhanced visible light absorption capacity as well as effective interfacial charge separation and transfer over CoFe2O4@UiO-66, emphasizing the successful construction of heterojunction. The degradation mechanism was further explored, which revealed the contribution of holes (h+), superoxide (•O2 -), and hydroxyl (•OH) radicals in the degradation process, however, h+ were the predominant reactive species. This work might open up new insights for designing MOF-based core-shell heterostructured photocatalysts for the remediation of industrial organic pollutants.

MoS2 and MoS2 Nanocomposites for Adsorption and Photodegradation of Water Pollutants: A Review

The need for fresh and conveniently treated water has become a major concern in recent years. Molybdenum disulfide (MoS₂) nanomaterials are attracting attention in various fields, such as energy, hydrogen production, and water decontamination. This review provides an overview of the recent developments in MoS₂-based nanomaterials for water treatment via adsorption and photodegradation. Primary attention is given to the structure, properties, and major methods for the synthesis and modification of MoS₂, aiming for efficient water-contaminant removal. The combination of MoS₂ with other components results in nanocomposites that can be separated easily or that present enhanced adsorptive and photocatalytic properties. The performance of these materials in the adsorption of heavy metal ions and organic contaminants, such as dyes and drugs, is reviewed. The review also summarizes current progress in the photocatalytic degradation of various water pollutants, using MoS₂-based nanomaterials under UV-VIS light irradiation. MoS₂-based materials showed good activity after several reuse cycles and in real water scenarios. Regarding the ecotoxicity of the MoS₂, the number of studies is still limited, and more work is needed to effectively evaluate the risks of using this nanomaterial in water treatment.

Nanosheets loaded on tetrahedral surfaces form a Z-type Bi2MoO6/γ-Bi2O3 heterojunction to enhance the photocatalytic degradation activity of lomefloxacin and Rhodamine B

Nanosheets loading on tetrahedral surfaces of a Bi2MoO6/γ-Bi2O3 heterojunction forming a Z-type energy band to enhance the photocatalytic degradation activity.

Facile construction of BiOBr ultra-thin nano-roundels for dramatically enhancing photocatalytic activity

BiOBr is a kind of promising photocatalyst because of excellent photoelectric separation efficiency and chemical stability. In order to improving practical application performance, a novel BiOBr ultra-thin nano-roundel (BiOBr-nR) was constructed in water-in-oil (WIO) emulsion microspheres, and prepared by hydrothermal reaction. Its specific surface area was increased by changing microtopography and downsizing. After being characterized by FT-IR, X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (XRD), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET), UV-Vis diffuse reflectance spectra (UV-Vis DRS) and photoluminescence (PL), it indicated the BiOBr-nR, being doped by C and N, is 4-5 times smaller and thinner than that of conventional BiOBr. It was also found that BiOBr-nR has narrower band gap energy (2.78 eV), excellent photocatalytic activity, significant reusability, and stability. The obtained BiOBr-nR photocatalysts were applied to remove organics. It presented excellent photocatalytic activity, the degradation rate of organics got to 99.2%. The mechanism of photodegradation was investigated, which indicated superoxide radicals and holes play a major role in the degradation of organics. Therefore, BiOBr-nR is a kind of environmentally friendly photocatalyst with stable photocatalytic activity, the removal rate still more than 97% after recycling for 10 times. In summary, we found a novel insight for designing and preparation of efficient and recyclable BiOBr photocatalytic materials, which exhibits high photoresponse for purifying the wastewater.

Development of Au-Pd@UiO-66-on-ZIF-L/CC as a self-supported electrochemical sensor for in situ monitoring of cellular hydrogen peroxide

Integrating metal-organic frameworks (MOFs) of different components or structures together and exploiting them as electrochemical sensors for electrochemical sensing has aroused great interest. Furthermore, the incorporation of noble metals with MOFs is conducive to the improvement of catalytic performance. In this work, Pd@UiO-66-on-ZIF-L nanomaterials were successfully synthesised onto a self-supported flexible carbon cloth (Pd@UiO-66-on-ZIF-L/CC) through a novel strategy called MOF-on-MOF. Then, Au nanoparticles were electrodeposited onto Pd@UiO-66-on-ZIF-L/CC to obtain Au-Pd@UiO-66-on-ZIF-L/CC, which can serve as an excellent electrocatalyst for the reduction of hydrogen peroxide (H₂O₂). The obtained flower-like Pd@UiO-66-on-ZIF-L/CC hybrid MOF changes the structure of the monomeric MOF alone and adds more attachment sites. The synergy of the bimetals greatly improved the catalytic performance of the as-developed sensor. Electrochemical experiment results show that the proposed sensor based on Au-Pd@UiO-66-on-ZIF-L/CC has an extended linear range from 1 μM to 19.6 mM with a sensitivity of 390 μA mM^-1 cm^-2, and a low limit of detection (LOD) of 21.2 nM (S/N = 3). Moreover, it has good anti-interference, reproducibility, repeatability and excellent stability. Furthermore, the real-time in situ detection of H₂O₂ secreted from human adenocarcinomic alveolar basal epithelial cells (A549 cells) was achieved by culturing cells on Au-Pd@UiO-66-on-ZIF-L/CC, which indicates the potential of the sensor for applications in cancer pathology. Both the synthesis strategy and the sensor design provide new methods and ideas for the production of ultrasensitive H₂O₂ electrochemical sensors.