Enhanced trichloroethylene degradation in the presence of surfactant: Pivotal role of Fe(II)/nZVI catalytic synergy in persulfate system

The mechanisms of yeast extracellular metabolites in stimulating microbial degradation of trichloroethylene: Physiological characteristics and omics analysis

The biodegradation of Trichloroethylene (TCE) is limited by low microbial metabolic capacity but can be enhanced through biostimulation strategies. This study explored the physiological effects and potential molecular mechanisms of the yeast Yarrowia lipolytica extracellular metabolites (YEMs) on the degradation of TCE by Acinetobacter LT1. Results indicated that YEMs stimulated the efficiency of strain LT1 by 50.28%. At the physiological level, YEMs exhibited protective effects on cell morphology, reduced oxidative stress, lessened membrane damage, and enhanced energy production and conversion. Analysis of omics results revealed that the regulation of various metabolic pathways by YEMs improved the degradation of TCE. Furthermore, RT-qPCR showed that the genes encoding YhhW protein in TCE stress and YEMs stimulation groups were 1.72 and 3.22 times the control group, respectively. Molecular docking results showed that the conformation of YhhW after binding to TCE changed into a more active form, which enhanced enzyme activity. Therefore, it is speculated that YhhW is the primary degradative enzyme involved in the process of YEMs stimulating strain LT1 to degrade TCE. These results reveal how YEMs induce strain LT1 to enhance TCE degradation.

Persulfate activation with biochar supported nanoscale zero- valent iron: Engineering application for effective degradation of NCB in soil

Nitrochlorobenzene (NCB) is very common in pesticide and chemical industries, which has become a major problem in soil environment. However, the remediation of NCB contaminated soil is received finite concern. Using biochar as a substrate for nanoscale-zero valent iron (nZVI/p-BC) to activate peroxodisulfate (PDS), a novel heterogeneous oxidative system had been applied in the current study to remediate NCB contaminants in soil. The degradation efficiencies and kinetics of m-NCB, p-NCB, and o-NCB by various systems were contrasted in soil slurry. Key factors including the dosage of nZVI/p-BC, the molar ratio of nZVI/PDS, initial pH and temperature on degradation of NCB were further examined. The results confirmed that the nZVI/p-BC/PDS displayed the remarkable performance for removing NCB compared with other systems. Higher temperature with nZVI/PDS molar ratio of 2:1 under the acidic condition favored the reduction of NCB. The treatment for NCB with optimal conditions were evaluated for the engineering application. The mechanism of nZVI/p-BC/PDS indicated that electron transfer between p-BC and nZVI was responsible for activation of PDS, generating active species (SO4•-, •OH and 1O2) via both the free and non-free radical pathways. Experimental results revealed prominent availability of nZVI/p-BC/PDS system in remediation of actual contaminated field by NCB.

Potential of metallurgical iron-containing solid waste-based catalysts as activator of persulfate for organic pollutants degradation

The production of solid wastes in the metallurgical industry has significant implications for land resources and environmental pollution. To address this issue, it is crucial to explore the potential of recycling these solid wastes to reduce land occupation while protecting the environment and promoting resource utilization. Steel slag, red mud, copper slag and steel picking waste liquor are examples of solid wastes generated during the metallurgical process that possess high iron content and Fe species, making them excellent catalysts for persulfate-based advanced oxidation processes (PS-AOPs). This review elucidates the catalytic mechanisms and pathways of Fe2+ and Fe0 in the activation PS. Additionally, it underscores the potential of metallurgical iron-containing solid waste (MISW) as a catalyst for PS activation, offering a viable strategy for its high-value utilization. Lastly, the article provides an outlook towards future challenges and prospects for MISW in PS activation for the degradation of organic pollutants.

Synthesis of CaCO3 supported nano zero-valent iron-nickel nanocomposite (nZVI-Ni@CaCO3) and its application for trichloroethylene removal in persulfate activated system

Nano zero-valent (nZVI) based composite have been widely utilized in environmental remediation. However, the rapid agglomeration and quick deactivation of nZVI limited its application on large scale. In this work, CaCO3 supported nZVI-Ni catalyst, namely nZVI-Ni@CaCO3 was prepared and used for the efficient removal of trichloroethylene (TCE) in PS oxidation process. The successful disbursement of nZVI-Ni on CaCO3 support material not only increased the surface area of nZVI-Ni@CaCO3 (69.45 m2/g) with respect to CaCO3 (5.92 m2/g) and bare nZVI (13.29 m2/g) but also improved the catalytic activity. XRD, XPS and FTIR analysis confirmed the successful formation of nZVI-Ni@CaCO3 nanoparticles. The nZVI-Ni@CaCO3 nanoparticles combined with PS had achieved complete removal of TCE (99.8%) with dosage of 36 mg/L and 1.34 mM respectively. These results showed that the use of CaCO3 as support material for nZVI-Ni could have significant influence on contaminant removal process. Scavenging and EPR tests validated the existence of SO4•-, OH• and O2•- radicals in PS/nZVI-Ni@CaCO3 system and highlighted the dominant role of SO4•- radicals in TCE removal process. HCO3- ions and humic acid have shown adverse effect on TCE removal due to radical scavenging and buffering effect. Owing to improved catalytic activity and easy preparation, the nZVI-Ni@CaCO3 nanoparticles could be served as an alternative strategy for environmental remediation.

Modeling and optimization study on degradation of organic contaminants using nZVI activated persulfate based on response surface methodology and artificial neural network: a case study of benzene as the model pollutant

Due to the complicated transport and reactive behavior of organic contamination in groundwater, the development of mathematical models to aid field remediation planning and implementation attracts increasing attentions. In this study, the approach coupling response surface methodology (RSM), artificial neural networks (ANN), and kinetic models was implemented to model the degradation effects of nano-zero-valent iron (nZVI) activated persulfate (PS) systems on benzene, a common organic pollutant in groundwater. The proposed model was applied to optimize the process parameters in order to help predict the effects of multiple factors on benzene degradation rate. Meanwhile, the chemical oxidation kinetics was developed based on batch experiments under the optimized reaction conditions to predict the temporal degradation of benzene. The results indicated that benzene (0.25 mmol) would be theoretically completely oxidized in 1.45 mM PS with the PS/nZVI molar ratio of 4:1 at pH 3.9°C and 21.9 C. The RSM model predicted well the effects of the four factors on benzene degradation rate (R2 = 0.948), and the ANN with a hidden layer structure of [8-8] performed better compared to the RSM (R2 = 0.980). In addition, the involved benzene degradation systems fit well with the Type-2 and Type-3 pseudo-second order (PSO) kinetic models with R2 > 0.999. It suggested that the proposed statistical and kinetic-based modeling approach is promising support for predicting the chemical oxidation performance of organic contaminants in groundwater under the influence of multiple factors.

Degradation of trichloroethylene in aqueous solution by FeS2 catalyst under innovative oxic environments

Rapid growth and industrialization have become a major threat to water contamination with carcinogenic chlorinated hydrocarbons such as trichloroethylene (TCE). Therefore, this study aims to assess the TCE degradation performance through advanced oxidation process (AOP) using catalyst FeS2 in combination with oxidants persulfate (PS), peroxymonosulfate (PMS), and hydrogen peroxide (H2O2) in PS/FeS2, PMS/FeS2, and H2O2/FeS2 systems, respectively. TCE concentration was analyzed using gas chromatography (GC). The results found the trend for TCE degradation by the systems was PMS/FeS2>PS/FeS2>H2O2/FeS2 (99.84, 99.63, and 98.47%, respectively). Degradation of TCE was analyzed at different pH ranges (3-11) and maximum degradation at a wide pH range was observed for PMS/FeS2. The analysis using electron paramagnetic resonance (EPR) and scavenging tests explored responsible reactive oxygen species (ROS) for TCE degradation and found that HO• and SO4-• played the most effective role. The results of catalyst stability showed PMS/FeS2 system the most promising with the stability of 99, 96 and 50% for the first, second and third runs, respectively. The system was also found efficient in the presence of surfactants (TW-80, TX-100, and Brij-35) in ultra-pure water (89.41, 34.11, 96.61%, respectively), and actual groundwater (94.37, 33.72, and 73.48%, respectively), but at higher reagents dosages (5X for ultra-pure water and 10X actual ground water). Furthermore, it is demonstrated that the oxic systems have degradation capability for other TCE-like pollutants. In conclusion, due to its high stability, reactivity, and cost-effectiveness, PMS/FeS2 system could be a better choice for the treatment of TCE contaminated water and can be beneficial for field application.

Efficient degradation of trichloroethene with the existence of surfactants by peroxymonosulfate activated by nano-zero-valent iron: performance and mechanism investigation

In this study, the degradation of trichloroethylene (TCE) with the existence of tween-80 (TW-80) or sodium dodecyl sulfate (SDS) using peroxymonosulfate (PMS) activated by nano-zero-valent iron (nZVI) was investigated. Over 87.6% TCE (with 1.3 g L^-1 TW-80 presence) was degraded by 0.9 mM PMS and 0.12 g L^-1 nZVI, while 89.7% TCE (with 2.3 g L^-1 SDS presence) was degraded by 1.2 mM PMS and 0.20 g L^-1 nZVI, in which more than 71.9% TCE with TW-80 existence and 87.5% TCE with SDS existence were dechlorinated. Besides, the effects of some factors (i.e., PMS and nZVI dosages, initial solution pH, and inorganic anions) on TCE removal were evaluated. The degradation of TCE was restrained continuously with increasing surfactant concentration, and TW-80 was more easily decomposed than SDS in PMS/nZVI system. Furthermore, sulfate radical (SO₄^-•) and hydroxyl radical (HO•) were demonstrated the main reactive oxygen species (ROS) contributing to TCE degradation and SO₄^-• played a dominant role through EPR tests and ROS scavenging experiments. Finally, the results of TCE degradation in actual groundwater confirmed that PMS/nZVI process has great advantages and potential in remediation of actual TCE-contaminated groundwater with TW-80 or SDS existence.

Review on the degradation of chlorinated hydrocarbons by persulfate activated with zero-valent iron-based materials

Chlorinated hydrocarbons (CHCs) are often used in industrial processes, and they have been found in groundwater with increasing frequency in recent years. Several typical CHCs, including trichloroethylene (TCE), 1,1,1-trichloroethane (TCA), carbon tetrachloride (CT), etc., have strong cytotoxicity and carcinogenicity, posing a serious threat to human health and ecological environment. Advanced persulfate (PS) oxidation technology based on nano zero-valent iron (nZVI) has become a research hotspot for CHCs degradation in recent years. However, nZVI is easily oxidized to form the surface passivation layer and prone to aggregation in practical application, which significantly reduces the activation efficiency of PS. In order to solve this problem, various nZVI modification solutions have been proposed. This review systematically summarizes four commonly used modification methods of nZVI, and the theoretical mechanisms of PS activated by primitive and modified nZVI. Besides, the influencing factors in the engineering application process are discussed. In addition, the controversial views on which of the two (SO₄·^- and ·OH) is dominant in the nZVI/PS system are summarized. Generally, SO₄·^- predominates in acidic conditions while ·OH prefers neutral and alkaline environments. Finally, challenges and prospects for practical application of CHCs removal by nZVI-based materials activating PS are also analyzed.

Coupling surfactants with ISCO for remediating of NAPLs: Recent progress and application challenges

Non-aqueous phase liquids (NAPLs) pose a serious risk to the soil-groundwater environment. Coupling surfactants with in situ chemical oxidation (ISCO) technology is a promising strategy, which is attributed to the enhanced desorption and solubilization efficiency of NAPL contaminants. However, the complex interactions among surfactants, oxidation systems, and NAPL contaminants have not been fully revealed. This review provides a comprehensive overview on the development of surfactant-coupled ISCO technology focusing on the effects of surfactants on oxidation systems and NAPLs degradation behavior. Specifically, we discussed the compatibility between surfactants and oxidation systems, including the non-productive consumption of oxidants by surfactants, the role of surfactants in catalytic oxidation systems, and the loss of surfactants solubilization capacity during oxidation process. The effect of surfactants on the degradation behavior of NAPL contaminants is then thoroughly summarized in terms of degradation kinetics, byproducts and degradation mechanisms. This review demonstrates that it is crucial to minimize the negative effects of surfactants on NAPL contaminants oxidation process by fully understanding the interaction between surfactants and oxidation systems, which would promote the successful implementation of surfactant-coupled ISCO technology in remediation of NAPLs-contaminated sites.

Mechanism of trichloroethylene degradation in Fe(II)-activated peroxymonosulfate coupled with citric acid system in the presence of surfactants

This study demonstrated that peroxymonosulfate (PMS) activated by Fe(II)/citric acid (CA) could effectively degrade trichloroethylene (TCE) in the presence of Tween-80 (TW-80) or sodium dodecyl sulfate (SDS). Significant TCE removal of 91.6% (90.1%) with 1.3 g L^-1 TW-80 (2.3 g L^-1 SDS) were achieved at the PMS/Fe(II)/CA/TCE molar ratio of 4/4/4/1 (20/20/20/1). TCE degradation could be greatly elevated by Fe(II) and CA addition, while the existence of surfactants restrained TCE removal and the inhibitory effect increased with the higher surfactant concentration. The tests of the electron paramagnetic resonance (EPR) and reactive radicals scavenging experiments proved that sulfate radical (SO₄^-•), hydroxyl radical (HO•), and superoxide radical (O₂^-•) were responsible for TCE degradation and SO₄^-• acted as the major one. The influences of initial solution pH and inorganic anions k(Cl^- and HCO₃^-) on TCE removal were also investigated. Eventually, TCE removal in actual groundwater tests with surfactants confirmed that the PMS/Fe(II)/CA process has a huge potential of practical application in remediating the groundwater contaminated by TCE after the pretreatment by solubilization using surfactants.

Polysorbate-80 pretreatment contributing to volatile fatty acids production associated microbial interactions via acidogenic fermentation of waste activated sludge

Polyoxyethylene dehydration sorbitol monooleate (polysorbate-80) pretreatment enhanced volatile fatty acids (VFAs) production of waste activated sludge (WAS) in acidogenic fermentation. The results showed that polysorbate-80 ameliorated WAS solubilization obviously with a soluble chemical oxygen demand (SCOD) increasing to 1536 mg/L within 4 h. Within 2 days of acidogenic fermentation, the maximal VFAs arrived to 2958.35 mg COD/L via polysorbate-80-pretreatment. The polysorbate-80 pretreatment boosted microbial diversity and richness in fermentation process. The Clostridium, Macellibacteroides and Acidocella strengthened microbial cooperation for the metabolic functions enhancement (e.g. amino acid metabolism and carbohydrate metabolism) for VFAs generation from WAS organics. Overall, the polysorbate-80 could play positive roles on the transformation of organic matter from sludge solid matters to VFAs, which was turned out to become an effective enhancing strategy for future WAS treatment / bioresource recovery with relatively low cost.