Multiple production of highly active particles for oxytetracycline degradation in a large volume strong ionization dielectric barrier discharge system: Performance and degradation pathways

Dual-course dielectric barrier discharge with a novel hollow micro-holes electrode to efficiently mitigate NOx

The effect of a novel hollow annular micro-hole electrode on the DBD de-NOx performance was investigated. The experimental results show that the hollow electrode allows the feed gas to take full advantage of the redundant heat of the electrode, thus reducing the energy consumption of the system. Subsequently, the micro-hole structure can improve the uniformity of feed gas in the plasma channel and prolong the residence time of the feed gas in the plasma channel. The reactor can also raise the temperature of the feed gas and enhance the plasma electric field. The optimum NOx removal efficiency of about 82.6% is achieved at 16 annular micro-holes. Compared to the rod electrode reactor, the novel electrode reactor shows 19.7% reduction in energy consumption and 13.2% enhancement in de-NOx efficiency. The calculations of de-NOx mechanism show that the NO2 concentration decays significantly as the feed gas residence time increases, accompanied by a slight increase in N2O concentration. The NO2 concentration marginally increases while N2O concentration slightly decreases as the increase of feed gas temperature. DBD de-NOx presents the mode of accelerated reduction of NO, essential removal of NO2, and gradual consumption of N2O with the reduced electric field increases.

Non-thermal plasma activated peroxide and percarbonate for tetracycline and oxytetracycline degradation: Synergistic performance, degradation pathways, and toxicity evaluation

Tetracycline (TC) and Oxytetracycline (OTC) are common antibiotics increasingly detected in the environment, posing a potential risk to human and aquatic lives. Although conventional methods such as adsorption and photocatalysis are used for the degradation of TC and OTC, they are inefficient in removal efficiency, energy yield, and toxic byproduct generation. Herein, a falling-film dielectric barrier discharge (DBD) reactor coupled with environmentally friendly oxidants (hydrogen peroxide (HPO), sodium percarbonate (SPC), and HPO + SPC) was applied, and the treatment efficiency of TC and OTC was investigated. Experimental results showed that moderate addition of the HPO and SPC exhibited a synergistic effect (SF > 2), significantly improving the antibiotic removal ratio, total organic removal ratio (TOC), and energy yield by more than 50%, 52%, and 180%, respectively. After 10 min of DBD treatment, the introduction of 0.2 mM SPC led to a 100% antibiotic removal ratio and a TOC removal of 53.4% and 61.2% for 200 mg/L TC and 200 mg/L OTC, respectively. Also, 1 mM HPO dosage led to 100% antibiotic removal ratios after 10 min of DBD treatment and a TOC removal of 62.4% and 71.9% for 200 mg/L TC and 200 mg/L OTC, respectively. However, the DBD + HPO + SPC treatment method had a detrimental effect on the performance of the DBD reactor. After 10 min of DBD plasma discharge, the removal ratios for TC and OTC were 80.8% and 84.1%, respectively, when 0.5 mM HPO +0.5 mM SPC was added. Moreover, principal component and hierarchical cluster analysis confirmed the differences between the treatment methods. Furthermore, the concentration of oxidant-induced in-situ generated ozone and hydrogen peroxide were quantitatively determined, and their indispensable roles during the degradation process were established via radical scavenger tests. Finally, the synergetic antibiotic degradation mechanisms and pathways were proposed, and the toxicities of the intermediate byproducts were evaluated.

Reactive Molecular Dynamics Simulation on Degradation of Tetracycline Antibiotics Treated by Cold Atmospheric Plasmas

The abuse of tetracycline antibiotics (TCs) has caused serious environmental pollution and risks to public health. Degradation of TCs by cold atmospheric plasmas (CAPs) is a high efficiency, low energy consumption and environmentally friendly method. In this study, a reactive molecular dynamics (MD) simulation is applied to study the interactions of reactive oxygen species (ROS) produced in CAPs and TCs (including tetracycline (TC), oxytetracycline (OTC), chlortetracycline (CTC) and demeclocycline (DMC)). As revealed by the simulation data at the atomic level, the main reaction sites on TCs are the C2 acylamino, the C4 dimethylamine, the C6 methyl group, the C8 site on the benzene ring and the C12a tertiary alcohol. The interaction between ROS and TCs is usually initiated by H-abstraction, followed by the breaking and formation of the crucial chemical bonds, such as the breaking of C-C bonds, C-N bonds and C-O bonds and the formation of C=C bonds and C=O bonds. Due to the different structures of TCs, when the ROS impact OTC, CTC and DMC, some specific reactions are observed, including carbonylation at the C5 site, dechlorination at the C7 site and carbonylation at the C6 site, respectively. Some degradation products obtained from the simulation data have been observed in the experimental measurements. In addition, the dose effects of CAP on TCs by adjusting the number of ROS in the simulation box are also investigated and are consistent with experimental observation. This study explains in detail the interaction mechanisms of degradation of TCs treated by CAPs with the final products after degradation, provides theoretical support for the experimental observation, then suggests optimization to further improve the efficiency of degradation of TCs by CAPs in applications.

Titanium-based MAX-phase with sonocatalytic activity for degradation of oxytetracycline antibiotic

In light of growing environmental concerns over emerging contaminants in aquatic environments, antibiotics in particular, have prompted the development of a new generation of effective sonocatalytic systems. In this study, a new type of nano-laminated material, Ti₂SnC MAX phase, is prepared, characterized, and evaluated for the sonocatalytic degradation of oxytetracycline (OTC) antibiotic. A variety of identification analyses, including X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectrometry, Brunauer-Emmett-Teller, and diffuse reflectance spectroscopy, were conducted to determine the physicochemical properties of the synthesized catalyst. By optimizing the operating factors, total degradation of OTC occurs within 120 min with 1 g L^-1 catalyst, 10 mg L^-1 OTC, at natural pH of 7.1 and 150 W ultrasonic power. The scavenger studies conclude that the singlet oxygen and superoxide ions are the most active species during the sonocatalytic reaction. Based on the obtained data and GC-MS analysis, a possible sonocatalytic mechanism for the OTC degradation in the presence of Ti₂SnC is proposed. The catalyst reusability within eight consecutive runs reveals the proper stability of Ti₂SnC MAX phase. The results indicate the prospect for MAX phase-based materials to be developed as efficient sonocatalysts in the treatment of antibiotics, suggesting a bright future for the field.

Highly stable and efficient calcined γ-Al2O3 catalysts loaded with MnOx-CeOx for the ozonation of oxytetracycline

Catalytic ozonation with supported metal oxides is a promising strategy for addressing refractory pollutants in wastewater. In this study, γ-Al2O3 supported MnOx-CeOx catalysts (MC1, MC2, and MC3) obtained at different calcination temperatures (400 °C, 550 °C, and 700 °C) were applied as effective catalysts for ozonation and explored the feasibility of the treatment of oxytetracycline (OTC) wastewater. Comparatively, the MC2 possessed the highest molar ratios of Mn3+/Mn4+ (1.60) and Ce3+/Ce4+ (0.96), the largest surface area (273.8 m2 g-1) with a petal-shaped structure, and most abundant surface hydroxyls (3.78 mmol g-1). These physicochemical characteristics benefited the surface reaction and resulted in the acceleration of ozone decomposition, electron transfer, and •OH generation, thereby improving the catalyst's adsorption ability and catalytic activity. The combination with MC2 increased the OTC and COD removal of the ozonation process from 59.1% and 29.0% to 94.7% and 83.3% in 25 min, respectively. By employing electron paramagnetic resonance (EPR) and radical quenching experiments, it was verified that •OH species generation promoted the mineralization of OTC. The possible degradation pathways of OTC were investigated through mass spectrometry, and the route consisted of dehydration, deamination, and demethylation. Moreover, during a 12-day continuous experiment, MC2 catalyst exhibited excellent reusability and catalytic stability, with COD removal efficiencies above 80%.

Degradation of the nonylphenol aqueous solution by strong ionization discharge: evaluation of degradation mechanism and the water toxicity of zebrafish

Nonylphenol (NP) is a typical environmental endogenous disrupter with low concentration and high toxicity. This paper describes the mechanism of NP degradation in solution by strong ionization dielectric barrier discharge (SIDBD). Furthermore, the degradation performance of NP by SIDBD was tested by changing the equipment voltage, the initial concentration of NP in aqueous solution, pH, and inorganic ions. Degradation pathways of NP were detected using a high-performance liquid chromatography-mass spectrometer. The biological effects of NP degradation were assessed by detecting indicators of embryonic development in zebrafish (survival rate, fetal movement, heartbeat, the body length, behavior, deformity) and adult fish (sex differentiation, weight, ovarian testes pathological section analysis). The results showed when the input O₂ was 5 L/min and the voltage was 3.2 kV, the degradation efficiency of NP can reach 99.0% after 60 min of experiment. Equipment voltage, initial concentration of NP in solution, pH, inorganic ions and other factors can influence the degradation efficiency of NP by DBD. At the higher concentration of NP, the greater influence on embryonic development in zebrafish was noticed. Although the effects of NP on zebrafish sex differentiation were not obvious, it showed significant male weight inhibition and decrease in sperm number.

Sulfadiazine removal by peroxymonosulfate activation with sulfide-modified microscale zero-valent iron: Major radicals, the role of sulfur species, and particle size effect

Sulfide-modified zero-valent iron (S-Fe⁰) is regarded as a promising method to enhance the catalytic activity of Fe⁰ for peroxymonosulfate (PMS) activation. However, the roles of sulfidation and the application of the sulfidation treatment method are worth to further investigation. In our study, the effects of the S/Fe ratio, Fe⁰ dosage, and initial pH on sulfadiazine (SDZ) removal were investigated. The characterization of S-Fe⁰ with SEM, XPS, contact angle and Tafel analysis confirmed that the formation of sulfur species on the Fe⁰ surface could enhance the catalytic performance of Fe⁰. S^2- played the major role and SO₃^2- played the minor role in accelerating the conversion of Fe³⁺ to Fe²⁺. EPR tests, radical quenching and quantitative determination experiments identified ^•OH as playing the major role and SO₄^•- also playing an important role in SDZ removal in S-Fe⁰/PMS system. Sulfidation produced no notable change in the role of ^•OH and SO₄^•-. A possible degradation pathway of SDZ was proposed. Effect of sulfidation on various sizes of Fe⁰ was also studied which demonstrated that the smaller sizes of Fe⁰ (< 8 µm) were more effective in the sulfidation method treatment. S-Fe⁰/PMS system also showed a good performance in removing antibiotics in natural fresh water.