Construction of solar light-driven dual Z-scheme Bi2MoO6/Bi2WO6\AgI\Ag photocatalyst for enhanced simultaneous degradation and conversion of nitrogenous organic pollutants

Copper Nanowire Networks: An Effective Electrochemical Peroxymonosulfate Activator toward Nitrogenous Pollutant Abatement

Herein, we developed an electrochemical filtration system for effective and selective abatement of nitrogenous organic pollutants via peroxymonosulfate (PMS) activation. Highly conductive and porous copper nanowire (CuNW) networks were constructed to serve simultaneously as catalyst, electrode, and filtration media. In one demonstration of the CuNW network's capability, a single pass through a CuNW filter (τ < 2 s) degraded 94.8% of sulfamethoxazole (SMX) at an applied potential of -0.4 V vs SHE. The exposed {111} crystal plane of CuNW triggered atomic hydrogen (H*) generation on sites, which contributed to effective PMS reduction. Meanwhile, with the involvement of SMX, a Cu-N bond was formed by the interactions between the -NH₂ group of SMX and the Cu sites of CuNW, accompanied by the redox cycling of Cu²⁺/Cu⁺, which was facilitated by the applied potential. The different charges of the active Cu sites made it easier to withdraw electrons and promote PMS oxidation. Theoretical calculations and experimental results were combined to suggest a mechanism for pollution abatement with CuNW networks. The results showed that system efficacy for the degradation of a wide array of nitrogenous pollutants was robust across a broad range of solution pH and complex aqueous matrices. The flow-through operation of the CuNW filter outperformed conventional batch electrochemistry due to convection-enhanced mass transport. This study provides a new strategy for environmental remediation by integrating state-of-the-art material science, advanced oxidation processes, and microfiltration technology.

Recent Progress of Three-dimensionally Ordered Macroporous (3DOM) Materials in Photocatalytic Applications: A Review

In recent years, three-dimensionally ordered macroporous (3DOM) materials have attracted tremendous interest in the field of photocatalysis due to the periodic spatial structure and unique physicochemical properties of 3DOM catalysts. In this review, the fundamentals and principles of 3DOM photocatalysts are briefly introduced, including the overview of 3DOM materials, the photocatalytic principles based on 3DOM materials, and the advantages of 3DOM materials in photocatalysis. The preparation methods of 3DOM materials are also presented. The structure and properties of 3DOM materials and their effects on photocatalytic performance are briefly summarized. More importantly, 3DOM materials, as a supported catalyst, are extensively employed to combine with various common materials, including metal nanoparticles, metal oxides, metal sulfides, and carbon materials, to enhance photocatalytic performance. Finally, the prospects and challenges for the development of 3DOM materials in the field of photocatalysis are presented.

Bismuth-based semiconductors applied in photocatalytic reduction processes: fundamentals, advances and future perspectives

Bismuth-based semiconductors (BBSs) with their typical layered structures and unique electronic properties are considered an attractive visible light-responsive photocatalysts. Recently, BBS exhibited promising properties and was rapidly developed in photoreduction reactions. In this review, we firstly focus on the photoreduction reactions of BBS with a description of the basic principles. Specifically, the restrictive factors of the photoreduction reactions and the design directions of the catalysts are addressed. BBS photocatalysts, such as bismuth oxide, bismuth halide oxide and bismuth-based oxygenates, are presented in terms of the catalyst material design, crystal structure and other features. Furthermore, the primary applications of BBS in photoreduction reactions are described, including CO₂ reduction, N₂ reduction, H₂ evolution, and nitrate reduction. Additionally, the advances and shortages of BBS applied in these processes are summarized and comprehensively discussed. Future works for BBS applied in photoreduction processes are also proposed.

Modulation of Z-scheme photocatalysts for pharmaceuticals remediation and pathogen inactivation: Design devotion, concept examination, and developments

The recent outbreak of Covid-19 guarantees overconsumption of different drugs as a necessity to reduce the symptoms caused by this pandemic. This triggers the proliferation of pharmaceuticals into drinking water systems. Is there any hope for access to safe drinking water? Photocatalytic degradation using artificial Z-scheme photocatalysts that has been employed for over a decade conveys a prospect for sustainable clean water supply. It is compelling to comprehensively summarise the state-of-the-art effects of Z-scheme photocatalytic systems towards the removal of pharmaceuticals in water. The principle of Z-scheme and the techniques used to validate the Z-scheme interfacial charge transfer are explored in detail. The application of the Z-scheme photocatalysts towards the degradation of antibiotics, NSAIDs, and bacterial/viral inactivation is deliberated. Conclusions and stimulating standpoints on the challenges of this emergent research direction are presented. The insights and up-to-date information will prompt the up-scaling of Z- scheme photocatalytic systems for commercialization.

Novel Z-scheme AgI/Sb2WO6 heterostructure for efficient photocatalytic degradation of organic pollutants under visible light: Interfacial electron transfer pathway, DFT calculation and mechanism unveiling

Developing highly efficient heterostructured photocatalysts with robust redox ability is of great significance to wastewater purification. Herein, a novel Z-scheme AgI/Sb2WO6 heterojunction was successfully constructed via a chemical-precipitation method. The Z-scheme system can serve as a highly efficient photocatalyst for degradation of organic pollutants in water. Under visible light illumination, the degradation efficiency of rhodamine B and tetracycline over the optimal Z-scheme heterojunction can achieve 95% in 12 min and 80% in 8 min, which is 10.8 and 11.4 times higher than that over single Sb2WO6, respectively. Interestingly, low amounts of Ag0 can be generated and attached on the surface of Sb2WO6 during the photocatalytic process, further enhancing the photocatalytic activity of the Z-scheme heterojunction. Based on theoretical calculations, the interfacial internal electric field (IEF) can facilitate the photoexcited electrons at the conduction band (CB) of AgI to consume the photoexcited holes at the valence band (VB) of Sb2WO6, which greatly promotes the Z-scheme charge transfer path. Quenching experiments and electron spin resonance analyses demonstrate superoxide radicals play a major role in the photocatalytic reactions. The concept of constructing a Z-scheme heterojunction photocatalyst with efficient interfacial charge transfer shall provide a design guide for wastewater purification.

Enhanced photocatalytic degradation of toxic contaminants using Dy2O3-SiO2 ceramic nanostructured materials fabricated by a new, simple and rapid sonochemical approach

The present study is on the fabrication of new photocatalytic nanocomposites (Dy2O3-SiO2) employing a basic agent, tetraethylenepentamine (Tetrene), through a simple, efficient and, quick sonochemical approach. The features of the fabricated photocatalytic nanocomposite were examined employing a variety of microscopic and spectroscopic methods such as XRD, EDS, TEM, FTIR, DRS, and FESEM. The outcomes of morphological studies demonstrated that by proper tuning of sonication time and ultrasonic power (10 min and 400 W), a porous nanocomposite composed of sphere-shaped nanoparticles with a particle size in the range of 20 to 60 nm could be fabricated. The energy gap for the binary Dy2O3-SiO2 nanophotocatalyst was determined to be 3.41 eV, making these nanocomposite favorable for removing contaminants. The photocatalytic performance of the optimal nanocomposite sample was tested for photodecomposition of several contaminants including erythrosine, thymol blue, eriochrome black T, Acid Red 14, methyl orange, malachite green, and Rhodamine B. The binary Dy2O3-SiO2 nanophotocatalyst exhibited superior efficiency toward the decomposition of the studied contaminants. It was able to degrade the erythrosine pollutant more effectively (92.9%). Optimization studies for the photocatalytic decomposition of each contaminant demonstrated that the best performance could be achieved at a specific amount of contaminant and nanocatalyst. Trapping experiments illustrated that hydroxyl radicals were more effectively involved in the decomposition of contaminant molecules by Dy2O3-SiO2 nanophotocatalyst.